Best preference settings for MacBook Pro Retina Mid 2012 with 2.7 Ghz Core i7 processor 16GB memory Nvidia GeForce GT 650M 1024MB processor

(using latest AE CC2014)
I have a MacBook Pro Retina Mid 2012 with 2.7 Ghz Core i7 processor 16GB memory Nvidia GeForce GT 650M 1024MB processor, doing some heavy AE renderings and just realized that this machine says it has 8 Cores? I'm had not yet turned on Multprocessing in Preferences Should I be?
Should I leave 1 or 2 cores for other applications?
RAM allocation per background CPU is defaulted set to 3GB
Also for Adobe Media Encoder: in preferences under Video Rendering /Rendere it is set at Mercury Playback Engine GPU Acceleration (OpenCL) is that the best config for this computer?

How much ram?
The best settings depend on what you are working on. Here are mine for a nearly identical system:
It's usually best to keep memory blocks in 4GB blocks. If my workflow is more in other apps I'll switch out other apps to 8 gb if things start to slow down. Because of my usual project settings I keep MP turned off on this machine, but for some projects I'll turn it on. If you decide to experiment to MP then keep an eye on the Actual CPU's that will be used and make sure the numbers add up. Other applications and Actual Cores should add up the the total in your system.

Similar Messages

  • Wifi replacement for MacBook Pro (Retina, Mid 2012)

    Over the last few months my wifi card has begun to get slower and slower and sometimes will not connect at all.  I spoke with an Apple tech, not at Apple and he said that Apple has had trouble with their Wifi cards on these MacBook's and it will likely need to be replaced. I am out of warranty and looked at the swap out video on iFixIt and it looks easy.
    What is not so easy is making sure to get the right replacement board.  Would like to use the later board to get a/c and Bluetooth 4.0.  Any ideas on part numbers and sources?  There are many parts on ebay and Amazon but it is hard to know which one is right.
    Thanks for any insight or help.  I understand others are in the same bind.
    Below is one I found but was not sure if it was right.
    3CYYAP® WiFi Bluetooth Card 653-0029 BCM94360CSAX for Macbook Pro 15" A1398 Late 2013

    Yes. See:
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    Reliable vendors for RAM are OWC, DataMem, and Crucial.com.

  • Upgrading RAM for MacBook Pro (Retina, Mid 2012)

    I want to upgrade RAM , currently 8 GB, to 16 GB . Is it possible to upgrade ?

    Yes. See:
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    Reliable vendors for RAM are OWC, DataMem, and Crucial.com.

  • What's the power Adapter for Macbook pro 13inch Mid 2012

    What's the power Adapter for Macbook pro 13inch Mid 2012 with core i-7, 2.9ghz, 8Gb ram?
    AFAIK it should be a 60wat Megasafe power adapter.
    But mine shipped with a 45Watt Megasafe. I got it as a Gift from my friend.
    Thanks in Advance.

    mmaumio wrote:
    60W MagSafe power adapter with "L" style connector
    This should be my Adapter right?
    Yes.
    There is a drawback in addition to taking a longer time to charge up your MBP.  In unusual instances when using your MBP with power adapter attached, and running a very heavy load on the CPU/GPU, the MBP will require additional electrical resources in addition to what the power adapter can provide.  It will then draw upon the battery.  What this means is that using a 45 watt adapter, these conditions are more likely to occur.
    Using a 45 watt adapter should not harm your MBP as such.
    Ciao.

  • My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Macbook Pro Retina mid 2012 low fps in bootcamp

    Hello,
    My English is not so good, so sorry if it's not correct, but I hope anyone could help me.
    I have a Macbook Pro Retina mid 2012, 2,3 GHz Intel Core i7, 8 GB ram, 250 GB SSD.
    My problem is when I go to bootcamp for gaming I get realy low fps. The most games start at 30 fps, but then they drop immediately to 8/9 fps and a second later back to 30 fps.
    It's like a car, when you drive to hard you have to slow down, but then you drive to slow so you need to go faster. He speed up and a second or 2 later he kicks on the brakes and a moment later he speed up again and kicks again on the brakes.
    Even with al the game setting on realy low and the lowest resolution. And that al the time in every game. My bootcamp is Windows 8 but in Windows 7 did I have the same problem. I did already a SMC reset and Pram reset and 5 clean installs. But nothing works. I installed al the updates in OS X en in Windows. There al alrealy some forums about this problem, but by them was a SMC reset enough. Maybe something is wrong with my Nvidia grapihc card. The problems starts everytime when the Nvidia card need to do this work.
    it's quite an annoying problem, it's not a cheap laptop, but my old laptop ( 2 years old ) are the gaming performs better compared to this one. I think the problems start after this SMC update http://support.apple.com/kb/DL1559?viewlocale=en_US but I'm not quite sure.
    Are there more people with this problem, please let me know. And maybe how you solve it.
    I hope realy if any one could help me.
    If you know a anser, please give it in a comment
    Thanks,
    Gerwin Tiemens
    <Email Edited by Host>

    Hello gerwintiemens,
    I recommend resetting your SMC and your PRAM. Perhaps even a safeboot as well.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Mac OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    All the very best,
    Sterling

  • MacBook Pro (Retina, Mid 2012) - Boot Camp/Win 7 - Num Lock Problem

    Hey,
    I have a client who has a MacBook Pro (Retina, Mid 2012) who is experiencing a problem when booted into Windows 7 via Boot Camp in that he cannot type certain character like # (hash character by keystroke alt + 3) without Windows 7 error bleeping at him. He needs the # character as part of his password for logging into webmail.
    The Boot Camp setup has the latest Boot Camp drivers installed (this was a fresh Boot Camp setup/install today) and every other part of the hardware works I suspect that this problem is not a key mapping problem but more something to do with Windows registering Num Lock as being active.
    If the problem is that Num Lock is enabled then what is the keystroke to disable Num Lock? I thought it was fn + 6 but did this change since the Unibody MacBooks?
    I understand that there are ways of resurrecting number pad fuctionality as decribed in the MacWorld article (see link below) but this is a Mac OS X System Preference and as such would not operate when booted into Windows via Boot Camp.
    http://www.macworld.com/article/1142609/ressurect_numberpad.html
    Any advice will be greatly appreciated.

    You have Graphics card problem.
    Take it in Hardware problem:
    Genius reservation http://www.apple.com/retail/geniusbar/
    on-line https://getsupport.apple.com/GetproductgroupList.action
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
    see if this applies http://appleinsider.com/articles/12/11/13/some-15-retina-macbook-pro-users-compl ain-of-graphics-issues-after-efi-update

  • Handoff dosen't work between Macbook pro Retina Mid 2012 & iPhone 6

    My Macbook Pro Retina Mid 2012 dosen't work in handoff with my iPhone 6 or my new iMac late 2012,
    Handoff option in the system preferences is allowed and i log in with the same iCloud in all my devices ,
    and its only work with the phone calls and messages but not for the safari or iWork's apps.
    Help plz!

    Your MBP is too old to support a 4k display:
    http://support.apple.com/kb/ht6008
    Ciao.

  • My MacBook Pro Retina, Mid 2012 at Mavericks 10.9.3 is freezing up several times a week

    My MacBook Pro Retina, Mid 2012 at Mavericks 10.9.3 is freezing up several times a week -- often happens, but not limited to, using the Application Window key. 
    Processor  2.6 GHz Intel Core i7
    Memory  16 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000
    Software  OS X 10.9.3 (13D65)
    Filesystem      Size   Used  Avail Capacity  iused    ifree %iused  Mounted on
    /dev/disk0s2   465Gi  328Gi  137Gi    71% 86029019 35899210   71%   /
    devfs          182Ki  182Ki    0Bi   100%      628        0  100%   /dev
    map -hosts       0Bi    0Bi    0Bi   100%        0        0  100%   /net
    map auto_home    0Bi    0Bi    0Bi   100%        0        0  100%   /home

    You have too much junk installed…
    The 'easy' way - reinstall
    I think you will be quickest backing up the HD to an external disk (check it still boots!). Erase the internal HD, reinstall 10.9, migrate your USER DATA ONLY back to 10.9, reinstall the apps you use, then delete the old login items & user launchd jobs that migrated. You should have a stable system at the end of it.
    The hard way - 'cleaning up'
    Firstly search these forums for opinions on running Sophos's AV - it adds extra work to your system & many have had issues with it on 10.9. At the very least ensure it is the latest release & 10.9 supported. Sophos is running 7 system level background jobs and 2 kernel extensions! These all can modify how the system runs.
    At the end of cleanup you may have a stable system - it really depends on how much effort you put into clearing out all the system level jobs that are not compatible with 10.9. The developers don't make it easy to remove software too, so you may have a lot of searching to do (for instructions & uninstallers).
    All of this below needs looking at !
    Kernel Extensions:
      [loaded] at.obdev.nke.LittleSnitch (4092 - SDK 10.8) Support
      [loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
      [loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) Support
      [not loaded] com.novatelwireless.driver.3G (3.0.2) Support
      [not loaded] com.novatelwireless.driver.3GData (3.0.2) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
      [not loaded] com.ovolab.driver.phlink (1.0) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (2.0) Support
      [not loaded] com.sierrawireless.driver.SierraSupport (1.4.11) Support
      [not loaded] com.sierrawireless.driver.SierraSwitch (1.2.2) Support
      [not loaded] com.sierrawireless.driver.SierraSwitchKicker (1.0.0) Support
      [not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) Support
      [not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) Support
      [not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) Support
      [loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items:
      Jaksta: Path: /Library/StartupItems/Jaksta
    Launch Daemons:
      [running] at.obdev.littlesnitchd.plist Support
      [loaded] com.adobe.fpsaud.plist Support
      [invalid] com.oracle.java.Helper-Tool.plist
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [not loaded] org.freedesktop.dbus-system.plist Support
      [running] org.glimmerblocker.proxy.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    Launch Agents:
      [running] at.obdev.LittleSnitchUIAgent.plist Support
      [invalid] com.oracle.java.Java-Updater.plist
      [running] com.sophos.uiserver.plist Support
      [loaded] org.freedesktop.dbus-session.plist Support
      [loaded] org.glimmerblocker.updater.plist Support
      [running] org.macosforge.xquartz.startx.plist Support
    User Launch Agents:
      [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
      [failed] com.BlueStacks.AppPlayer.LogRotator.plist Support
      [loaded] com.BlueStacks.AppPlayer.Service.plist Support
      [failed] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
      [failed] com.BlueStacks.AppPlayer.UpdaterAgent.plist
    Uninstall Jacksta, the 'startup items' have been deprecated since 10.4 - Apple told developers to stop using them years ago.
    Update all the other apps listed or find uninstallers/ removal instructions to correctly remove the software.
    Are all those sierrawireless and novatelwireless drivers used or needed anymore?
    Can you uninstall BlueStacks? It's failing to run jobs inside your user account, get rid of things that don't work (or update them & check they do work).
    Java's updater is failing to run - is Java up to date? Do you need Java installed? It isn't installed on Mac OS anymore because of it's lousy security record. Update or remove if you don't need it.
    You could try removing Sophos & find that the Mac runs OK - but eventually having all the old kernel extensions & background jobs around will eventually cause something else to break.

  • Beach ball of Death at log in Screen Macbook Pro Retina Mid-2012 10.10.3   supplemental

    I have a MacBook Pro Retina Mid-2012 that is running 10.10.3 with all updates (including supplemental 10.10.3 update), that will "beach ball" when I click one of the user accounts after the MacBook starts up.   If I wait 10-15 minutes, I am able to enter a password.  Usually after doing so, it takes another 10-15 minutes to log in before I can actually use the computer.
    MacBook is joined to domain.
    Problem with beach ball occurs on all user accounts, domain, local and mobile.
    Can boot Mac into Safe Mode just fine- no beach ball.
    I have tried reinstalling Yosemite using the Recovery Partition.  This did not fix the problem.
    Original Yosemite install is a clean install on the Mac hard drive (completely erased existing OS before installing Yosemite).
    Recently purchased the Mac- problem occurred 2 weeks after purchase.  I had been using Mac with 10.10.3 fine up until yesterday.
    Tried resetting NVRAM and SMC.  No change.
    Booted into Safe Mode, ran Disk Utility.
    Booted regular (waited) and ran Disk Utility.
    No change after running Disk Utility.
    Not sure if this is a residual 10.10.3 problem (again, the Mac has the 10.10.3 supplemental update) or it is a hardware problem.
    Any ideas?
    Thank you

    The spinning beach ball is the please wait. Till your computer can allocate more memory to the app you are tying to open. Since it happens in all user accounts, you have an app or apps with a startup item that is using a lot of memory. Something that all users have access to. That is why you can startup in safe mode. Opening and running the activity monitor in all processes for memory might help you to find out what is causing this. It could be more than one process. Safe mode disables a lot of startup items and some other non essential apps. You could download and run Etrecheck. Post it and we might be able to see where your problem is.http://www.etresoft.com/etrecheck If you have a lot of ad on programs that you run ,you might need more memory.

  • Ghosting (burn-in) on MacBook Pro (Retina, Mid 2012) after installing OS X Yosemite

    Has anyone started noticing ghosting (burn-in) on your laptop screen after installing OS X Yosemite ?
    I'm using MacBook Pro (Retina, Mid 2012).

    Hi,
    I may have noticed the same thing, (Should I be concerned about colors behind grey login screen at startup?). I called apple support and it appears that the screen background is "slightly visible" after the update. You can change your background and see if your ghosting image moves accordingly. The white bleed through in my images, happens to be from Earthdesk which displays a map as a background. You might be seeing a similar effect.

  • Aren't the pages,numbers,keynote free for macbook pro retina late 2012 users?

    Aren't pages, numbers and keynote free for macbook pro retina late 2012 users?

    Free if you have iWork '09 on the MBP.
    SG

  • Internal HDD installation guide for MacBook Pro 13" mid-2012 model

    Hello,
    Can someone please share any step by step guides or instructional videos for installing a new internal HDD in a MacBook Pro 13" mid-2012 model. Also, please advise on how to format the new HDD as it is an unformatted one.
    Thanks in advance!

    To format your new HDD, connect it to your MBP and open Disk Utility>Erase.  Select Mac OS Extended (Journaled) and then clone the data from the internal HDD to the new external one.  You may use Disk Utility>Restore or use Carbon Copy Cloner (third party software) to do the cloning.  Test the new HDD via Startup manager and then perform the swap.
    Ciao.

  • MB Pro Retina mid-2012 with OSX 10.9.5 no longer recognizes 2nd monitor

    After the OSX 10.9.5 update, my MB Pro Retina mid-2012 started to crash whenever I had it connected to an external monitor via a VGA to Thunderbolt adapter. The crash Kernel report follows below.
    After a couple of days my laptop stopped crashing, but now it won't detect any external monitor - none show up in the System Preferences/Displays. Tried a couple of different monitors ((VGA is the only available input for those). Running Diagnostics does not show any problem.
    Any help would be greatly appreciated!
    Wed Oct  8 10:35:19 2014
    panic(cpu 4 caller 0xffffff7f89763f7c): "GPU Panic: [<None>] 3 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x0010a1c0: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x102c00000 0xffffff811885d000 0x0e7150a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 4), Frame : Return Address
    0xffffff80159b2a30 : 0xffffff8007422f79
    0xffffff80159b2ab0 : 0xffffff7f89763f7c
    0xffffff80159b2b80 : 0xffffff7f87fe4ba4
    0xffffff80159b2c40 : 0xffffff7f880aeebe
    0xffffff80159b2c80 : 0xffffff7f882f7b7a
    0xffffff80159b2cd0 : 0xffffff7f8811a068
    0xffffff80159b2d40 : 0xffffff7f882fb3b4
    0xffffff80159b2e00 : 0xffffff7f881275d6
    0xffffff80159b2e30 : 0xffffff7f882330cf
    0xffffff80159b2e60 : 0xffffff7f88234da1
    0xffffff80159b2f00 : 0xffffff7f88235368
    0xffffff80159b2f80 : 0xffffff7f87ff9a03
    0xffffff80159b2fd0 : 0xffffff7f8823949a
    0xffffff80159b3130 : 0xffffff7f88239a2a
    0xffffff80159b31b0 : 0xffffff7f880e6822
    0xffffff80159b3380 : 0xffffff7f880e53c3
    0xffffff80159b33c0 : 0xffffff7f880f552c
    0xffffff80159b3420 : 0xffffff7f880f61af
    0xffffff80159b34e0 : 0xffffff7f87fcf753
    0xffffff80159b3510 : 0xffffff7f87fcee55
    0xffffff80159b3530 : 0xffffff7f87fcf7e0
    0xffffff80159b3570 : 0xffffff7f87fcecab
    0xffffff80159b3610 : 0xffffff7f87fc1225
    0xffffff80159b36b0 : 0xffffff7f87fe9221
    0xffffff80159b38b0 : 0xffffff7f87fea208
    0xffffff80159b3990 : 0xffffff7f8818a4d8
    0xffffff80159b39e0 : 0xffffff7f8818ab5c
    0xffffff80159b3a90 : 0xffffff7f8817eede
    0xffffff80159b3c60 : 0xffffff7f87f9685b
    0xffffff80159b3cf0 : 0xffffff7f87f80088
    0xffffff80159b3d70 : 0xffffff7f87f83000
    0xffffff80159b3db0 : 0xffffff7f87f82892
    0xffffff80159b3e20 : 0xffffff7f87f4a452
    0xffffff80159b3e60 : 0xffffff7f87f496fa
    0xffffff80159b3e90 : 0xffffff7f87f45a04
    0xffffff80159b3ef0 : 0xffffff80078b0a20
    0xffffff80159b3f30 : 0xffffff80078af4c2
    0xffffff80159b3f80 : 0xffffff80078af643
    0xffffff80159b3fb0 : 0xffffff80074d7607
          Kernel Extensions in backtrace:
             com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f87f7e000->0xffffff7f87f8dfff
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f87f3b000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f87abf000
             com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f89755000->0xffffff7f89768fff
                dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f8974d000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8875a000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f87abf000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f87f3b000
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f89750000
             com.apple.nvidia.driver.NVDAResman(8.2.6)[272B6397-FEDB-32FC-9035-BDD749284455] @0xffffff7f87f94000->0xffffff7f88207fff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f87abf000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f87f7e000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f87f3b000
                dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f87f8e000
             com.apple.nvidia.driver.NVDAGK100Hal(8.2.6)[EF73AF59-A574-3A5A-B410-7E4F2DA819B 0]@0xffffff7f88213000->0xffffff7f883bffff
                dependency: com.apple.nvidia.driver.NVDAResman(8.2.6)[272B6397-FEDB-32FC-9035-BDD749284455] @0xffffff7f87f94000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f87abf000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13F34
    Kernel version:
    Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
    Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
    Kernel slide:     0x0000000007200000
    Kernel text base: 0xffffff8007400000
    System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
    System uptime in nanoseconds: 274773149981034
    last loaded kext at 215374964646844: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f89984000, size 335872)
    last unloaded kext at 269733255167780: com.parallels.kext.hypervisor 10.0.2 27712 (addr 0xffffff7f89929000, size 319488)
    loaded kexts:
    com.apple.filesystems.smbfs 2.0.3
    com.apple.filesystems.afpfs 11.1
    com.apple.nke.asp-tcp 8.0.1
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AudioAUUC 1.60
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AGPM 100.14.34
    com.apple.driver.ApplePlatformEnabler 2.0.9d7
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.GeForce 8.2.6
    com.apple.driver.AppleIntelHD4000Graphics 8.2.8
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleMuxControl 3.6.22
    com.apple.driver.AppleIntelFramebufferCapri 8.2.8
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.driver.AppleSDXC 1.5.2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBXHCI 683.4.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.security.SecureRemotePassword 1.0
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.nvidia.driver.NVDAGK100Hal 8.2.6
    com.apple.iokit.IOBluetoothFamily 4.2.7f3
    com.apple.iokit.IOAcceleratorFamily 98.23
    com.apple.iokit.IOSurface 91.1
    com.apple.nvidia.driver.NVDAResman 8.2.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.driver.AppleGraphicsControl 3.6.22
    com.apple.iokit.IOAcceleratorFamily2 98.23
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.driver.AppleUSBMultitouch 240.10
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 686.4.1
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.pthread 1
    com.apple.kec.corecrypto 1.0

    iDVD 7 should work fine with 10.7.5.  Try this basic troubleshooting fix:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
    User/Home/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iDVD folder. 
    3 - launch IDVD and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    OT

  • Macbook pro 15 mid 2012 with os x 10.8.4 taking long time to boot up

    i am using macbook pro 15 mid 2012
    2.6GHz intel core i7
    8GB RAM
    700GB hard disk
    my macbook is taking much more time to start and get it ready its taking more than 1min 30sec
    after system starded its hard to open any application(safari) for starting time some times while using safari the cursor is in not responding i mean doing some process its showing colour wheel rotating
    please tell me how to speed up my macbook pro

    How much free disk space is available ??
    Click the Apple menu icon top left in your screen. From the drop down menu click About this Mac > More Info > System Report then select Storage on the left under Hardware.
    You'll see Available and Capacity. Make sure there's at least 15% free disk space.
    If there's sufficient free disk space, check for login items. Open System Preferences > Users & Groups > Login Items
    Delete any items there then restart your Mac to test.
    some times while using safari the cursor is in not responding i mean doing some process its showing colour wheel rotating
    Try troubleshooting plugins and extensions...
    From your Safari menu bar click Safari > Preferences then select the Security tab.
    Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.
    If it's not a plug-in issue, select the Extensions tab. If there are any extensions installed, turn that OFF, quit and relaunch Safari to test.  If that made a difference, uninstall one at a time, quit and relaunch Safari to test.

Maybe you are looking for