Best Quality for SD

After looking at the forums. I see that you can't burn a HD DVD for all Players. So forgive my rookiness here. I use a Canon XHA1 HD to film in. My questions are.
Can you burn an HD DVD for use in all DVD players.
If not what would you recommend to do about SD. The quality is reduced greatly when I burn them to SD.
Thanks!

Sorry, you cannot even burn in all HD DVD players. It will not play at all in SD DVD players.
Yes the quality of SD is much lower than HD, but look at it this way. You have spent your entire life watching SD TV. Only now that you have HDTV did you realize how low res SDTV is.

Similar Messages

  • Best quality for youtube

    I made a video and its 2.01 GB in iMovie. i want to put it on youtube but I want the best possible quality. The limit for youtube is 100MB whats the best way to compress my movie?

    Hi F,
    I followed your link and found your instructions about exporting from iMovie with best quality for YouTube.
    The instructions were pretty clear, although my options didn't line up with them exactly (I'll tell you my explicit settings below). Still, I exported it successfully.
    Then I uploaded the resultant .mov file to YouTube. When it was all finished processing, I viewed it. After the first fraction of a second all I saw was garbage -- just junk patterns filling the screen. The sound was excellent. (by the way, I had lots of very short clips in there -- 00:00:03 in length (not sure what the units are).
    So I went back to iMovie, opened up my movie project. Played the video. Now it is intermittent garbage, too. Looks just like the uploaded file, but only intermittently.
    Here are the exact options and settings I used for export:
    File->Share, chose quicktime and expert settings, pressed the "share" button.
    in the Export dialog, I selected "movie to quicktime movie" and clicked on the "options" button.
    Options:
    Video:
    Settings...
    Set compression to mpeg-4
    Set quality to medium
    Set frame rate to 30
    Let Key frame and Data rate defaulted (unchecked)
    Filter...
    didn't look at this. Now that I do, it's set to "none"
    Size...
    Selected the "custom size" radio button and set it to 320 x 240
    Sound:
    Settings...
    format: uncompressed
    sample rate: 44.1khz
    sample size: 16
    channels: 1 (mono)
    There was also a check box for "Prepare for internet Streaming"
    It was already checked and set to "fast start"
    I didn't change it.
    If you could give me any further help, I'd really appreciate it. This was my first attempt to put anything on YouTube.
    Thanks a lot,
    Bruce Delaplain
    Message was edited by: Bruce Delaplain1

  • Why is the finished DVD so low quality despite having chosen best quality for Pal. Compared to Pro Show Gold its rubbish !

    I am VERY disapointed with the quality of a finished DVD. As a proffesional weddig photographer the program quality is just not proffesional in quality. Compared to Pro Show Gold by Photodex which unfortunately is not available in MAC format. Can anyone offer advice and proove me wrong for deciding on MAC over PC !
    I have chosen the best quality and burnt using Toast 11

    Hi Nigel.
    nigelfromlewes wrote:
    What can I add other than I followed the instruction to the letter and have purchased a suggested
    Application Toast11 .
    You can add plenty (and probably remove a bit as well  ).  As you recompose your question(s), keep in mind:
    the respondents on this site are just users helping other users.  Apple sponsors the site (for its own ends) but does not participate in any of the discussions or provide any compensation of any kind to any participants.
    whining and threatening (typically: "Lightroom is looking better and better", but your "proove me wrong for deciding on MAC over PC !" is up there) lower your chance of receiving helpful advice.
    no one here knows what you are trying to do, what you have done, what the result was, how that differed from what you expected, or anything about your current software and hardware set-up other than what you tell us.  Being pointed and specific is a very good way to help us help you.
    What were you trying to do?
    What specific steps did you take to achieve it?
    How did the result differ from what you expected?
    What steps have you taken to achieve a different outcome?
    Did that work?
    What hardware and software are you using?

  • The best quality for ripping a song

    hi,
    i have some old cds that i would like to rip and upload to my ipod touch.
    but what's the rate for ripping songs from cds that would give me the best quality of the songs.
    thanks.
    ps. now i use 192 bps, but sound quality doesn't seem too good.

    You'll get an extensive comparison of the AAC and MP3 formats and bit rates benchmarked against CD format at this link: Planet of Sound - Quality of AAC audio and MP3

  • Exporting the film in best quality for further editing

    I am about to finish a 52-minute long documentary in Final Cu Express. I've been editing in HD, using Apple Intermediate Codec1080i50.
    Part of the project files and render files are in an external G-Raid and other part are on my Macbook pro hard drive, Since I will be traveling, I would like to be careful and minimize the risk of something happening either to the G-Raid or to my Mac, therefore, I want to export the film as it is, although in the future I still might need to work on it - do some more final editing and definitely do the subtitles in DVD Pro (currently I don't have the DVD Pro). My question is whether I should be using export - quick time movie or quick time conversion - and what the settings would be for the best quality product that could be used in documentary film screenings and possibly shown on TV? Or how should I go about saving the project? Right now the project file only has references to the files, right, not the files themselves and if something happens I might lose it all...
    Thanks for the help!

    QuickTime Movie. Forget the render filed, they seldom reconnect properly; it's usually better just to re-render. Keep your G-RAID and make sure it is backed up together with your project.

  • Export settings for best quality for pages with letters etc.

    Hi, I am trying to make video of a musical piece, featuring the score of the piece with pages turning following the progression of the music. I made the video in Adobe After Effects CS5 and exported it so it would be lossless. The video itself is a .mov file and looks great when I view it in Quicktime, but when I import it into FCE the quality goes down a bit. I don't know if FCE is handling the clips correctly or if it's just for making it quicker to view. Any suggestions on export settings from FCE for best quality of a video of this nature, so that the notes are clearly readable.
    Thanks in advance
    Ps. It has to be in a format suitable for Youtube.

    Under "Sequence" and in "Settings" and in the tab "Render Control" I have: Frame Rate: 100% Resolution: 100%.
    If that is what you were referring to... but under the tab which is called RT and is located left of the timeline and left of the timecode. There I have checked : Safe RT, (Playback Video Quality) Dynamic, (Playback Frame Rate) High.
    There might be a way to import the clip in better quality (so it doesn't downgrade the quality).
    Was mostly trying to find out with the export but it might have something to do with this.
    Thanks

  • Best quality for burning to DVD?

    I've created a video project for a friend - home movies, scanned family photos, etc., with narration and music. Some of the images are pretty good quality, some not so great, but it's okay. I now want to burn it to a DVD - what's the best quality way to do that? Is there a compression type better for this than others?

    Just export from FCE to QuickTime Movie.  DO NOT export to QuickTime Conversion if the ultimate purpose is to create a DVD.  iDVD or other DVD authoring software will take care of the necessary encoding for DVD.
    To save time & disk space, when you export from FCE you can UNcheck the option called "Make movie self-contained."  This will create what is called a QT Reference Movie, which you can import into iDVD or other DVD authoring software just the same as any other QT Movie.
    One more tip - before exporting your movie from FCE be sure to do the following to actions.  This will make your export go more smoothly and help maintain quality overall:
    Sequence > Render All > Both and
    Sequence > Render Only > Mixdown

  • Exporting best quality for DVD

    I shot video with a Canon 5d Mk2. 1080p 30 frames, 48k.  Looks awesome in Premiere!  But when I export the video to Encore i use the Mpeg-2 DVD preset, and it just kills the quality.  I have to burn to standard DVDs because my clients need them that way, so Blu ray isn't an option.
    I understand it has to compress everything, but i would like to know how to get the best quality possible.  It needs to look better! I am using CS5
    Please Help!

    John,
    Thanks for your response. The issue seems so simple since I've followed steps described on Lynda.com back when I was using CS4.
    I'm now using CS6.01. I created this video in CS4 and updated it in CS5. PS, AE, and Pr
    I've installed all of the updates to CS6. To newest  QuickTime and to the Video Card
    My PC is running Windows 7 Ent.; 64-bit Xeon CPU Quad 2.8GHz
    And I'm not running other software.
    The source footage is a sequenced .tiff animation I rendered out of AE.
    I've made a video a few years back. A copy is here on YouTube: http://youtu.be/lAh70G_AOFE.
    I'm not editing the video. I just get requests to have a DVD of the original source to play in our tradeshows. Sharp copy/product edges. It looks great in Premiere and I've set on paper my standard work from Lynda.com (Premiere Pro CS4 Essential Training - Chapter 16).
    I select the Sequence in Premiere Pro and select File / Adobe Dynamic Link / Send to Encore. Then set the Project and Build settings.
    But as you can see below the file exported to Encore didn't transcode (?) properly
    BEFORE Screen in Premiere:
    NEW: I can see now that the Video in the timeline has the jags

  • Exporting best quality for HDV

    Hi - I've been editing for the first time on HDV 1080i50 in FCP - I want to export as a Quicktime in the best setting possible but not sure what it is. When I go export quicktime hdv1080i it only lets me do medium quality - in the past when I've exported in dv-pal I can change the setting to best quality...can anyone suggest what I should do.
    thanks

    thanks - what about the settings on that please as I think it just does the last export setting (which would be dv-pal)
    cheers

  • To get the best Quality for YouTube?

    Hi there.
    I have a question.
    Which settings do I have to have in the media encoder in pro cs3, to get the best quality in a YouTube video?

    I found this discussion from almost a year ago:
    Drogba, "My YouTube video looks blurry using Adobe Media Encoder" #, 20 Oct 2007 10:32 am
    ...but the suggestions discussed there didn't help me, so I'm hoping someone reading this thread has other ideas. YouTube's PixelDestroyer® and VideoFracker® technology does an effective job of making my good footage look like it was shot through a thin film of mashed potatoes.
    The H.264 codec seems to have ruination as its primary purpose. And the iPod and flv settings aren't much better. Heck, even if I export to mpeg (either keeping the native 720 x 480 resolution or shrinking to 320 x 240) my produced mpegs look great -- but once YouTube gets hold of them, they look like
    dreck.
    Sure, Vimeo or WhateverOtherTube service may have better quality, but when someone wants to search for a video, there's only one site that anyone thinks of going to. That's why Google bought them.

  • Best quality for export?

    What settings for best quality when exporting an HDV video to disk?
    Using QT w/H264 but the quality is not acceptable. Can I tweak the settings?
    FWIW, I get better quality using Sony Click to Disc at its default settings. Just trying to match that at this point.
    Thanks.

    Which "disc" are you exporting to? Hard drive, CDR, DVD-R, etc. And is the point to get as file a file size as possible or are you just trying to archive video but don't care about file size?
    And to answer your question, yes you can tweak output settings for H264. When you go to Share -> "Export using QT..." on the export pull down you pick MPEG-4 then directly to the right is a button for "Options". Pick that. Also in there is a button for "Video Options" to refine it even further.
    Patrick

  • Best quality for DVD playback!

    I just finished a film i shot in HDV my sequence properties are:
    Vid Rate: 29.97fps
    Frame Size: 1440x1080
    Compressor: HDV 1080i60
    Field Dominance: Upper Odd
    what is the best why to export this sequence onto a dvd for maximum playback quality?

    Hi there,
    1)make sure you export your movie in FCP as QT movie self-contained
    2)Import it in Compressor
    3)In the Settings tab (lower left window) Open Apple>DVD10 groups>choose DVD 90 minutes best quality and drop that folder on your video (upper left batch window). Compressor will encode your movie as Mpeg2 video an AC3 dolby stereo. In the inspector window you can change a number of settings if you wanted to but, if you are not familiar with Compressor, leave default settings to see if you are happy with the result (take sometime to read the very useful PDF manual that you can find in the main menu>help)
    4)Choose destination
    5)Submit
    G.

  • Best quality for editing fcp with p2 standard definition and canon elura 100 widescreen

    I am editing on FCP 7. Three cameras were used. Panasonic HPX 500 set in standard def 4x3, another small panasonic that shoots standard def was used only it was set a 16x9 and an even smaller Canon  NTSC Elura 100 was set on widescreen (16x9). My mistake is I want them look the best they can (at 16x9 or 4x3) when burned to DVD. I would prefer to go with 4x3 and crop the 16x9s. I have a Mac Pro 1,1 ; 2 Dual Core Intel Xeon 2.66 gHx and AJA Kona card. The question is: What is the BEST setting for log & capture of each device and what is the BEST sequence setting to build my project on. Right now everything looks like it has a soft shadowy image (basically low quality image - probably because it is mostly low quality... even the HPX 500 looks bad because I expanded it to fit the 16x9 screen of my sequence. And here's a strange event, even though my sequence setting is 720x480 the screen aspect ratio comes out 16x9... go figure. I seem to know less and less about this business every day. If anybody is willing to offer some advice on how I can make Chicken Salad out of this Chicken Shi_, I'd love to hear it. I hope it's just a settings problem on the ingest or sequence side.
    Thanks,
    KennyRay

    Wrong forum. This is the FCP X forum. You should post your question in the Final Cut Studio one.

  • Best quality for watermark movie

    I need to do a watermark on my 87 minute DVD movie to send to France. This isn't a big studio thing and I have to do things myself. I will copy to FCP from the DVD master (which was made from 35mm to Digi-beta to DVD) and want the best quality I can get. I have the papers on watermarks and can figure that out easily enough.
    To make it more complicated, there are extras and commentary also. But I can forgoe these as the dvd movie is enough for them to decide whether to distrib it or not.

    The 35mm print was transferred to digi-beta by my North American distrib. DVDs were made from digi-beta master as far as I know and for only their use. All other territories are mine, thus a French company which had the old VHS version now would like to see the DVD version as the VHS was pretty poor. The new DVD is quite good, even in copied DVD, considering the original 35mm print is 32 years old.
    I can send a DVD to France but am wary about sending a copy without watermark, having dealt with foreign distribs before. Can't really get a sales agent as the fan market for movie is limiited and sales agents steal just as much as distribs do.
    The only media I have to work with is a DVD. A transfer may follow as I have the 35mm prints but obviously I don't want to pay for digi-beta transfer or at least for full price.

  • Best quality for SD movie into iDVD

    I just finished creating a movie in iMovie '09. It was originally recorded with a Sony 8mm camera and passed through a Sony DV camera into my MacBook.
    I've added the titles, transitions, chapter marks, etc. The movie is about 50 minutes long.
    What is the best way to get it into iDVD and retain the best quality possible?
    Should I "share to iDVD" or export as a QuickTime movie and then drag that into iDVD? Which settings would be the best for that choice?

    You can actually convert them AFTER you've moved them in. When you captured them from the camera, they were saved into DV format. You can use mpegstreamclip (free download) to convert the DV clips into AIC or M-JPEG. If you do it correctly, the next time you start iMovie it will import the AIC-based clips in as well. Then, when iMovie reads them into your project and eventually renders the final movie, it will handle rendering better with AIC or M-JPEG clips as the source material.
    I understand needing to work with what you have; it is a pain to go and replace each clip, clip by clip, with new clips. However, I have very little experience with DV. I've been using mpeg clips from a HDD camcorder for over a year and have only just started using DV as I am now also shooting with a higher-end DV camera for church projects.
    I wish I could give you advice on how to export your project so iDVD can make the best DVD from it, but all of my work to date has been exported into movie files and played onto a HD TV through a laptop using QT or presentation software.

  • Import/Export to retain best quality for a Beginner

    Hi,
    I'm hoping someone could help me retain the best quality possible for my video while working on projects because whatever I'm doing now is not working.
    I shoot with a Sony HDR-FX1000 in HDV 1080i/24p and the picture and quality is amazing when plugged into a TV or played back on the camera LCD screen.  I use a new iMac 2.7GHz Intel Core i5, Mac OS X 10.7.4 to edit.  However, when I import into my new FCP X it is not as crisp and quality, and then when I export, it is definitely not the quality I imagined.  The video loses it's sharpness and it gets very noisy plus fuzzy lines appear in some areas of shots.  These lines don't show up when I view my edited footage in the timeline, only after exporting.  I'm fairly new to this all and know I'm not using the best settings to retain the most quality because the beginning and end quality look very different. 
    I don't do heavy duty editing or effects at the moment.  Basic color correction, slow-motion, preset effects, transitions, music and titles.
    ANY help relating to what my settings should be across the board to retain the best image possible is greatly appreciated.  I can't seem to figure it out with trial and error anymore and thought I'd turn to the experts for help.
    Thanks!
    Smalls

    I've set the viewer to both fields.  I guess I don't know why I was transcoding.  I thought it somehow optimized the video.  Could part of the reason the quality drops be because I transcoded the video when I didn't need to?
    When I export, these are the settings I use and then export to QuickTime.
    Here is an example of the noise and lines that show up after exporting the video.
    It's not like this in the viewer while editing EXCEPT when I change playback quality to High Quality.  Any idea why?
    Also, these are my settings when importing the video.  What should be changed other than deselected the Transcoding options?
    I really appreciate the input.  Thanks!

Maybe you are looking for