Best router to hook up a G4 (ethernet cable) and a Macbook (Airport Xpress)

I have a Macbook that is running on an Airport Xpress base station that is plugged into my Cable modem. I also have a G4 that I would like to connect to the Cable Modem, but there is only one slot. I assume that I need a router of some sort, but I have no idea what kind to get. I don't care about the computers talking to each other, I just want both of them to be able to access the internet at the same time.
Thanks for any and all correspondance!!!
Matt D

MattD_portland, Welcome to the discussion area!
If you want to continue to connect your G4 via Ethernet, you could do one of the following:
Get an inexpensive wired router and place it between the cable modem and AirPort Express. Configure the AirPort Express so that the option to distribute IP addresses is DISABLED. Connect the G4 to one of the available LAN ports on the router.
Replace the AirPort Express with an inexpensive wireless base station or an AirPort Extreme base station (AEBS). This will provide you with one or more LAN Ethernet ports as well as a wireless network. Connect the G4 to one of the available LAN ports.

Similar Messages

  • In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

    In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

    It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

  • I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

    I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

    Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

  • Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme..

    Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.

    This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
    In other words, you need to have two Apple AirPort routers to extend a wireless network.
    When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection.

  • Can i unplug time capsule from the ethernet cable and still use it??

    can i unplug time capsule from the ethernet cable and still use it??

    I have tried to extend that wireless line but as soon as i remove the LAN cable i have no internet connection anymore. So basically, does the TC get the signal wireless from the router??
    The Time Capsule can wirelessly extend a wireless signal....but only if it is being provided by another Apple AirPort wireless router.
    If the "main" rotuer there is not an Apple AirPort router,  you will need to connect to the network using a wired Ethernet connection.

  • Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know).  What gives?  It works fine when the PC is off.

    Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of).  What gives?  When the PC is turned off, everything is totally fine.  I\m stumped. 

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    I suspect a problem with your router. Try changing the security. First use no security as a test.
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS3972 Im using an ethernet cable and apple tv picks up my pc but not my internet.

    Im using an ethernet cable and apple tv picks up my pc but not my internet?

    the message that comes up on apple tv tells me
    it detects my netork but not my internet.and directs
    me to go to the configure the network again,i do that
    using the auto  function on the ethernet config.
    it shows my an IP address
    subnet mask
    router and dns are blank
    and shows an ethernet address.
    thanks for your patience im new to this.

  • Airport Express won't see ethernet cable and internet

    I have just connected to new ISP. Airport was working perfectly before. I try to connect new modem to airport with ethernet cable and the Airport utility says nothing is connected to the ethernet WAN port and keeps telling me to plug it in but it is...I have hard reset, and rebooted everything... I am at a loss. Do I need to change IP addresses or DNS server addresses? I connect the ethernet direct to my macbook and the internet works perfectly, but I plug the ethernet into the airport and it doesn't see it. Can someone please help me, the ISP's advice is buy a router from them... but I have used airport for many years on different ISP's and they have worked. Does anyone have a suggestion besides rebooting and the paperclip?

    Sorry, I am not familar with this product, but maybe some other users who have used the same product can help.
    IF you have not yet performed a full Factory Default Reset on the AirPort Express, that might be a good idea, as a Hard Reset will not return the AirPort Express back to factory fresh settings.
    To do this....
    Power off the AirPort Express for a few minutes
    Hold in the reset button first, and keep holding it for an additional 9-10 seconds while you simultaneously plug the Express back in to power
    Release the reset button after the hold period and allow a full minute for the Express to restart
    It is unusual for the WAN port to fail, but if you continue to see the message about no connection at the WAN port, that is likely what has happened.
    If you have an Apple Store in your area, you might want to take the Express to them to let them have a look.

  • Is there a way to use an ethernet cable and cinema display with the new Macbook Air

    I just purchased a new MacBook Air and would like to connect to an ethernet cable and to a 30: cinema display.  Is there an adapter that would allow one to do this?

    Yes you need one of these it's a Thunderbolt hubs
    http://www.matrox.com/docking_station/en/ds1/
    Price $249
    Or
    http://www.belkin.com/thunderbolt/
    Price $299
    The Belkan is due for release immenantly and note those USB ports are version 3.
    This is what Thunderbolt is all about it's an external PCie and far more than just a cable

  • My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

    My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

    This is more about your modem then anything. Sometimes you'll need to unplug and plug back in your modem. Consider it a glitch from the ISP or just the modem in general.
    when I need to turn something off then on I try the modem first. This when I'm not doing any ware and tare to the device.

  • Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

    Question
    Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • I set up time capsule using a wireless 4g modem.  it's been five hours and it still is saying making backup disk available (4.97 GB of 18.52 GB).  Can I stop the whole thing, get a ethernet cable and start over to increase the speed of the backup?

    I set up a new time capsule on a wireless 4g modem.  I started the initial backup.  It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)."  Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
    Thanks,
    David

    Bunce wrote:
    oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
    If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
    I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
    suggestions before I either get this looked at or scrap the HD on it and move forward.?
    Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
    Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
    If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983

  • Will the Thunderbolt to Gigabyte ethernet cable connect my Macbook Pro with Retina Display to a Hotel Wired Internet Service?

    Will the Thunderbolt to Gigabyte ethernet cable connect my Macbook Pro with Retina Display to a Hotel Wired Internet Service?

    Yes,  You may also need an ethernet cable.

  • I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts ?

    I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?

    Yes, you ran into a very understandable problem.
    When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
    If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
    Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
    That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account.

  • Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

    Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

    If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
    Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
    If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
    Post back on your results.

Maybe you are looking for