Best setting for K7N2-L and 3000+ (333FSB)

I am kind of new to the overclocking world. I have the following setup:
500 Watt ATX power Supply
K7N2-L Motherboard w/400mhz FSB
AMD XP 3000+ Barton Core at 333 FSB
1Gb (2x512) Generic PC3200 DDR SDRAM (400 FSB)
I also have
Nvidia FX 5600 w/ 256mb DDR
WD 7200 120 HD
Sound Blaster Live 5.1
I want to make sure that I'm gettin the best speed for my setup. The POST says the memory is at 400 mhz and it does say that the CPU is 3000+. Is that as good as it gets or can I go more.
Any replies are greatly appriciated.
Thanks,
SekaiDragon

Do I need to mess with my multiplier or my memory settings?
I have it at 175 FSB which has my CPU Running at 2.28 Ghz. I tried it at 180 FSB and my Command and Conquers - Generals - Zero Hour Quit after 1 minute saying there was a hardware problem. It's been running fine for 2 hours on 175 FSB.
On sandra it says performance rating for the cpu is PR3306, do you know what that means?
I'm going to go take a look at the stickies now...
Thanks again,
Sekaidragon

Similar Messages

  • What's the best iTunes import setting for highest quality and universality?

    What's the best iTunes import setting for highest quality and universality?

    Highest quality?
    Apple Lossless. (But the files are way big)
    Universality?
    MP3 (choose the bit rate you think sounds best and doesn't take too much space)

  • Can anyone help me with getting the best setting for me system

    can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help  

    my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
    i wouldnt be too concerned...those temps are pretty low to begin with.

  • I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this   الس    but they always appear like that ا ل س

    I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this   الس    but they always appear like that ا ل س

    MS Word for Mac has never supported Arabic.  You have to use other apps.  Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
    Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word.

  • Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

    Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
    There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
    What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

    If that's the best you can do why don't you get on another forum?

  • What's the best setting for a best shades quality?

    Hi!
    I would like to know what are the best codec and the best setting for a video with 1920x1080 of resolution.
    I've tried them all but nothing because the shades...are not shades.
    I want a video that is like a uncompressed video but lighter. Same quality, same shades.
    I've tried with Canopus Lossless but the video is darker and huge (7 min for >17 gb),
    then with Canopus HQ, same quality but a little bit lighter (6 gb),
    I've tried with all of codecs and settings but I haven't found what I want.
    Who can help me for the best settings for the best shades?
    Thanks so much.
    P.S: Sorry for my english!

    I used the PNG codec but the video is too big.
    New Question:  I've tried to encode the video with Canopus HQ but to 720p and now the video is more lighter, I wanted to upload it on YouTube but is not compatible with the standards.
    If I encode this video by changeing the codec to Microsoft Avi uncompressed, can I have the same quality and the same weight?

  • What is the best setting for export movie in widescreen format?

    Please tell me what is the best setting for exporting movie in Widescreen format?

    Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
    Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
    Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
    However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
    bogiesan

  • I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding."  I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

    I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding."  I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.  Thanks

    sandyzotz wrote:
    Other wise, I probably best return for a refund and get a Samsung.
    Unlikely.  Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
    Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Best Setting for Best Battery Life!

    Please post for me your best setting for the best battery life on your IPhone 4.
    Thanks.
    Stan

    http://www.apple.com/batteries/iphone.html

  • Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

    Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

    You are asking two different questiions:
    1. What's a good photo editor? Answer to that here is probably obvious.
    2. What's a good desktop publishing/page layout program for creating PDF files for production? Answer, not PSE. It's a photo editor, not a page layout program.

  • What's the best App for downloading, editing and saving Microsoft Excel spreadsheets please?

    What's the best App for downloading, editing and saving Microsoft Excel spreadsheets please?

    You can have a look at Quickoffice
    http://i1224.photobucket.com/albums/ee374/Diavonex/74fb0e85.jpg

  • When you back up your Iphone/Ipad it backs up for camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

    When you back up your Iphone/Ipad it backs up your camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

    What do you mean by storage quota, does that mean i could be photo streaming about 1gb of photos and it does not get taken away from my free 5bg.

  • Best Practices for Using Photoshop (and Computing in General)

    I've been seeing some threads that lead me to realize that not everyone knows the best practices for doing Photoshop on a computer, and in doing conscientious computing in general.  I thought it might be a good idea for those of us with some exprience to contribute and discuss best practices for making the Photoshop and computing experience more reliable and enjoyable.
    It'd be great if everyone would contribute their ideas, and especially their personal experience.
    Here are some of my thoughts on data integrity (this shouldn't be the only subject of this thread):
    Consider paying more for good hardware. Computers have almost become commodities, and price shopping abounds, but there are some areas where spending a few dollars more can be beneficial.  For example, the difference in price between a top-of-the-line high performance enterprise class hard drive and the cheapest model around with, say, a 1 TB capacity is less than a hundred bucks!  Disk drives do fail!  They're not all created equal.  What would it cost you in aggravation and time to lose your data?  Imagine it happening at the worst possible time, because that's exactly when failures occur.
    Use an Uninterruptable Power Supply (UPS).  Unexpected power outages are TERRIBLE for both computer software and hardware.  Lost files and burned out hardware are a possibility.  A UPS that will power the computer and monitor can be found at the local high tech store and doesn't cost much.  The modern ones will even communicate with the computer via USB to perform an orderly shutdown if the power failure goes on too long for the batteries to keep going.  Again, how much is it worth to you to have a computer outage and loss of data?
    Work locally, copy files elsewhere.  Photoshop likes to be run on files on the local hard drive(s).  If you are working in an environment where you have networking, rather than opening a file right off the network, then saving it back there, consider copying the file to your local hard drive then working on it there.  This way an unexpected network outage or error won't cause you to lose work.
    Never save over your original files.  You may have a library of original images you have captured with your camera or created.  Sometimes these are in formats that can be re-saved.  If you're going to work on one of those files (e.g., to prepare it for some use, such as printing), and it's a file type that can be overwritten (e.g., JPEG), as soon as you open the file save the document in another location, e.g., in Photoshop .psd format.
    Save your master files in several places.  While you are working in Photoshop, especially if you've done a lot of work on one document, remember to save your work regularly, and you may want to save it in several different places (or copy the file after you have saved it to a backup folder, or save it in a version management system).  Things can go wrong and it's nice to be able to go back to a prior saved version without losing too much work.
    Make Backups.  Back up your computer files, including your Photoshop work, ideally to external media.  Windows now ships with a quite good backup system, and external USB drives with surprisingly high capacity (e.g., Western Digital MyBook) are very inexpensive.  The external drives aren't that fast, but a backup you've set up to run late at night can finish by morning, and if/when you have a failure or loss of data.  And if you're really concerned with backup integrity, you can unplug an external drive and take it to another location.
    This stuff is kind of "motherhood and apple pie" but it's worth getting the word out I think.
    Your ideas?
    -Noel

    APC Back-UPS XS 1300.  $169.99 at Best Buy.
    Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
    I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left.  The load with the monitor sleeping is 171 watts.
    This has surge protection and other nice features as well.
    -Noel

  • Best practice for Error logging and alert emails

    I have SQL Server 2012 SSIS. I have Excel files that are imported with Exel Source and OLE DB Destination. Scheduled Jobs runs every night SSIS packages.
    I'm looking for advice that what is best practice for production environment.Requirements are followings:
    1) If error occurs with tasks, email is sent to admin
    2) If error occurs with tasks, we have log in flat file or DB
    Kenny_I

    Are you asking about difference b/w using standard logging and event handlers? I prefer latter as using standard logging will not always data in the way in which we desire. So we've developed a framework to add necessary functionalities inside event handlers
    and log required data in the required format to a set of tables that we maintain internally.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for

  • SC Attachment move to other Server

    My customer is looking for when he Save a SC which carry an attachment , attchment should not be saved at SRM server. Attachment must be saved to another document repository like DMS...But when he open a SC (say for check status) document should be 

  • Workflow Translation issue

    Hi, We have maintained the decision texts  for User decision step types in both German and English language,to enable the user to see the user decision text in the logon language, we have done this through the path EXTRAS->Translation->Translation. H

  • How to left justified the value of the field in script

    hai how to left justified the field in script for example i am having a field &wa-netwr& , how to left justified the value of this field in scripts thank u in advance

  • When attempt to publish, I get an error

    I have several flash files linked to one page of my Muse site.  When I attempt to publish I get an error that says I have lost contact with the server, and try later.  This has been going on for 2 days.  Always happens when the flash files are attemp

  • Internet Explorer is my default browser when I open iCal, how can I change it since it is always crashing?

    I have ical pinned to my task bar, but when it opens, it opens in internet explorer.  This is really annoying since it is always crashing and never loads properly.  I use Chrome mostly, but also Firefox as a backup.  If there is any way to change thi