Best way to connect wirelessly to Linksys router on PC-based net?
I have a Powermac G4/MDD running OX 10.3.9. Plenty of RAM.
Tried to install an Airport card but the System Profiler does not recognize it. Says there is no Airport card. I have taken it out and re-installed several times with the antenna plugged in.
1. Could the card be bad?
2. Is there any other reason the Mac won't see the card? (outdated driver, i'm running v2.02 of Airport driver)
Assuming the card is dead, there is a warning on the Mac (it's from my wife's workplace) that it does not support third-party cards (i.e. PCI cards)
3. Has anyone heard of that happening?
4. If that's the case, would an Ethernet Wireless Bridge work? Since there's no drivers sounds like an ideal solution
5. I've heard good things about the Belkin 7330. Comments on that product or any other good(or bad) wireless bridges, such as Netgear?
Thanks,
Andy
I have a Powermac G4/MDD running OX 10.3.9. Plenty of
RAM.
1. Could the card be bad?
Are you trying to install an original Airport card or an Airport Extreme Card.
If you have a FW800 port you should be using the Airport Extreme card.
If you don't then you should be using the original Airport card.
2. Is there any other reason the Mac won't see the
card? (outdated driver, i'm running v2.02 of Airport
driver)
You have not pushed it in correctly, or you are using the wrong card.
Assuming the card is dead, there is a warning on the
Mac (it's from my wife's workplace) that it does not
support third-party cards (i.e. PCI cards)
You can use third party 802.11b PCI cards with the G4 PowerMac.
4. If that's the case, would an Ethernet Wireless
Bridge work? Since there's no drivers sounds like an
ideal solution
Yes
5. Recomendations for wireless bridges? I've heard
good things about the Belkin F5D-7330. Netgear or
D-Link?
I would recommend the Linksys WET54G as this works well and is easy to configure.
iFelix
Similar Messages
-
The best way to connect wireless and wired for a WRT160N.
It took me about 4 hours to find out how to connect wireless and wired to a network using model WRT160N. Here is what I have done. First install the CD when it says there is not connection connect your PC, Modem and router Andy any wireless are wired products, after that do what the linksys advisor tells your which is default. When it gives you the security key write it down because you will need it for your wireless and wired Products. Under security mode type your SDD name and where key 1 is type your security password with was given to you. Remember all you wireless products have to have the same SDD Like Linsys and all your wired products have to have a different name like Linsys2 but your Key 1 numbers has to stay the same. That is all you have to do. Remember that wireless and wired has to be in sequence. That should do it.
Hi David Hamilton1;
I guess that all depends on how critical your data is in relation to how much time you want to spend doing the erasure. Those higher level erasure options can take a significant amount of time to complete. Personally I don't have anything on my Mac that I think is worth more time then a simple erasure even if that does leave it some what recoverable. To me it seems some people are going overboard on this issue.
Allan -
I have an ipad first generation. I am trying to connect to a linksys router and the ipad is not finding the wireless network. What do I need to do? Thanks for your help.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks
Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling -
What is the best way to connect a MacBook Pro to my HiFi system ?
Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them. -
What's the best way to connect the audio out of my Mac to my stereo receiver?
I want to listen to my mp3 collection through my home theatre stero receiver.
I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
I even hear these flaws when I listen to headphones through the headphone out of my mbox.
Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
I got this one from monster thinking it should work. No dice.
So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
Why might I be getting these clipping distoritons?
any advice would be fantasticIt depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
http://www.apple.com/itunes/airplay/
I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
http://www.apple.com/airportexpress/
You can even find refurbished ones on Apples website for about $79. -
Best way to extend wireless via airport express and time capsule
best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank youWhat you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps. -
What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?
What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?
It should be possible to network them easily.
Ethernet will be the most straightforward. There is no question that you can plug both Macs into a normal network and they can share files if you turn on File Sharing.
The iMac has a Gigabit Ethernet port, and if the G4 also has Gigabit Ethernet, that will be a very fast connection through a gigabit-capable Ethernet cable or router. Otherwise both can use the slower Ethernet speeds with no problem.
You can also network the two machines via a FireWire 800 or FireWire 400 cable if necessary, and use File Sharing that way too. Finally, you can put one Mac into FireWire Target Disk Mode, which turns it into a hard disk that the other Mac can see, but this is the least flexible since one machine goes out of service, and it's probably no faster than Gigabit Ethernet. -
Can't establish a network with Wireless-G Linksys router and Macs
I have a Wireless-G Linksys router and two Macs. My DSL cable is connected to the modem, the modem to the router w/Ethernet cable, and the router to a desktop Mac out of port 1. With this setup, I can usually -- not always -- connect to my wireless network with my PowerBook, but then the desktop Mac cannot connect to the internet. Either Mac connects to the internet when hooked up directly to the DSL modem. I have reset the modem. I have connected to the router's console and everything seems to be in order.The PowerBook can connect to the internet through the wireless router as described above, so there don't seem to be any Mac/PC incompatibility issues at work.My local gurus and my ISP are stumped. Any suggestions?
Then , Connect the MACINTOSH Computer to Port 1 or
Port 2 on the Router.Hope you are Online. Now,
Open a new Internet Browser Page, and in the address bar,
type http://192.168.1.1, press return, And when asked for
Username and Password,
Leave the Username blank and in the Password field,
type admin . This will help you access the Router's
Console. Now, Click the Tab " Wireless " at the top,
Rename the SSID from ' Linksys' to your preferred name.
Save the Settings.
Now, Click the Tab " Wireless " at the top,
Then Click the Sub Tab in the Blue Line ' Wireless Security '
just below the Wireless Tab,
Set the Security Mode to WEP, Default Key as Key 1,
Encryption Mode as ' 64 Bits10 Hex Digits ' ,
Leave the Passphrase blank, Type a 10 digit Key
[ can contain 0-9, A-F ] in WEP Key 1 Field alone,
Copy the Key on a piece of paper for your reference,
Save the Settings. Now, Make your Computer Wireless.
Restart it. Once the Computer has restarted,
Go to " System Preferences",
Click on the Icon , " Network " , Set the Location to " Automatic "
Set the Show Listing as " Airport "
Now, Under the Tab Airport, Set it to
By default Join a Specific Network.
Click the + Button to add a Network
As the Network name, type the same name of the Network
that you have typed on the Router's Console, by
delecting the name Linksys.
As the WEP Password , type a $ symbol followed by the
10 DIGIT Number that have had copied on a piece of Paper.
For Example, if your WEP Key is 0123456789,
you will type it on the MACINTOSH AS
$0123456789
Click Apply Now button Down below.
Now, Click the First Tab " TCP / IP,
Check the IP Address below Configure " Using DHCP " .
If it's in the range, 192.168.1.100
and the Router Id is 192.168.1.1 >>>>>>>>> COOL
Check whether you are Online wirelessly with the Computer
Revert back for assistance,
shriraj - the boss . . . -
Best way to connect my Mac Air to my TV ?
What's the best way to connect my Mac Air to my TV ideally wirelesly so I can have meetings in the room displayed on the TV?
The TV has an HD port.You're only option at this point in time for a wireless connection to your TV for mirroring your display is a product called McTivia, which runs around $180.
If wireless isn't absolutely necessary and you don't feel like shelling out that much cash, a simply HDMI cable and a Mini DisplayPort to HDMI adapter would do the trick and save you over $100. -
Linksys Wireless Card (Linksys Router) in G4 Power Mac works fine until...
Linksys Wireless Card (Linksys Router) in G4 Power Mac works fine until...
new software upgrades on the 14 August 2006 (yesterday) which includes Airport 4.2.
The Linksys wireless PCI card (WMP54G) was installed just under a year ago with no problems. There was no need to install drivers, the Apple Mac recognised it and used it as a wireless card. I was browsing the internet last night (14 August) and the software updates downloaded in the background. Once it finished downloading, it requested for a re-start. I carried on browing the internet and then switched off my machine and went to bed.
When I turned on my computer in the morning, the wireless card no longer activates. The computer recognises there is a card but there is no connection to the router (meaning no internet). The router settings have not changed at all.
I believe it could be the Airport 4.2 update has interfered with the Linksys Card, but I'm not sure. I've been through all the Assist functions etc and there is no luck. It does seem that the big update released on the 14th August has played its part.
Any opinions and assistance on getting the card back to normal, and if possible assistance in removing the new updates to previous drivers/settings.
Thanks people.
G4 Power Mac Dual Processor Mirrored Doors Mac OS X (10.3.9)Sorry, I do not have a solution for you but I have the same problem upgrading from Jaguar to Panther (on my home machine not listed which is a G3 b&w). Now my WMP54G doesn't see any wireless network (I used to be able to see several in the 'hood), and Apple Profiler recognizes the card. Apple updater changed the Airport system files, I believe.
Is it possible to find the old Airport software and install over current system to get it working again? I doubt Apple still offers the old airport software, but if someone has it, maybe it can be installed with Pacifist.
We need some wireless help here, community.
2.5 GHz Dual PowerMac G5 | 3GB RAM | SuperDrive Mac OS X (10.4.6) -
I have a virgin Superhub which serves my wireless needs throughout the house. I have a Timecapsule which connects wirelessly to the router with no issues. I can backup my MBP over wireless easily. I have now got another machine in a different part of the house that I would like to connect to the network. It doesn't have wireless so ethernet is the only option. I have a number of options 1) run cabling - not really possible 2) buy a powerline network system or 3) use the timecapsule to connect to the network/internet.
I like option 3 because
(a) - I don't have to spend any more money and
(b) - my wife wont complain about cables also see (a)
Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
ThanksShould using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks
No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.) -
Best way to connect iMac to TV
What's the best way to connect my iMac (2011) to my TV? My TV has HDMI inputs and my iMac has Thunderbolt ports, so I know I can connect them with a cable, but they are about 20 feet apart and I think that's too long for a cable run. Does anyone have suggestions?
TIA,
ThadGet an Thunderbolt to HDMI adapter and a 20 feet long HDMI cable.
There is no problem with the length, but a 25 feet HDMI cable will be around 20$ on eBay.
If you need to really go long distance, then you could get a HDMI over CAT6 extender.
This one will allow 130 feet.
Some models will let you extend up to 1000 feet! -
What is the best way to connect my new MBP to monitor - DVI, VGA or HDMI
What is the best way to connect my new MBP to a computer monitor? DVI, VGA or HDMI? Thanks
I recommend the Apple MiniDisplay Port to DVI adaptor. I would avoid VGA. MiniDisplay Port to HDMI will work as well (3rd party).
http://www.apple.com/search/?q=dvi%20adaptor§ion=mac&geo=us -
What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?
What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?
If you want to connect 2 Displays you must do it one with the Minidisplayport and one by HDMI if you have a Retina 13 Inch. i think the old MBP doenst have HDMi Out
Maybe you are looking for
-
we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work effi
-
Undelivered JMS messages get deleted on startup. Why?
WebLogic 6.1 (SP2), NT4 (SP6), native IO enabled. Here's what happens: 1. A JMS client posts a number of messages (say 8000) to a Weblogic JMS queue backed up by a database store. 2. The JMS consumer
-
How to retrieve the data stored in BLOB field in MySql using java?
Hi all! i stored a file content into the MySql database in BLOB field. and i now want retrieve the data...... Please help me out in doing the task........... Thanx...........
-
Problem with ServletOutputStream
Hi! I am a fresh developer getting trained on J2EE. When i use response.getWriter() to ger the writer object, it's working fine. I tried to get the ServletOutputStream object and create a writer object by passing it to the PrintWriter. The problem is
-
IPod Dock Won't Charge iPod Classic 3rd Gen
Hi, I have an iPod Classic 3rd generation that is running Version 2.3 with the Capacity of 13.9 GB. Model: M946OCH It looks like this: http://profile.ultimate-guitar.com/profilemojo_data/5/8/5/1/585103/pics/_c297123_image0.png The problem: this iPod