Best way to create special prices for a single BP?

Hi Experts,
Can anyone suggest the best way to do the following?   I have a single BP who will ALWAYS purhcase at 10% above the landed cost (or last purchase price of an item) for any item in SAP B1.   I don't see how I can implement this through Special Prices.   Is there any other way?
Regards
Geoff

Hi Gordon
I did consider this method but it occurred to me that whenever we create a new item (or indeed the last purhcase price of an item changes) then the special price will not change.   We also have a item list of over 50,000 items and I have always found that adding special prices for a business partner for all 50k items increases the sizes of the database considerably.
I am looking for a more dynamic approach that will change as we add new items or last purhcase price changes.  
Could this be done through the addition of a new price list perhaps which is based on the last purchase price?   I don't fully understand what the factor does but I presume it will create a new price based on another price list only higher or lower?
Regards
Geoff

Similar Messages

  • What is the best way to create the layout for a single page website in Adobe Muse?

    I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

    I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
    Demo Website

  • What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

    What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at  individual PXI system).

    Dear Ravens,
    I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.

  • Best way to create customized counter for slideshow.

    Hello everone. I am stuck on this one. What is the best way to create a customizable for the slideshow widgets. Im looking to create circles or boxes that change color in relation to the picture in the slideshow. I am sure that I have seen it on a muse site before, but just can't figure how to get it done. Thanks!

    Have you tried using:
    Effect > Text > Numbers ?
    You could also have found that answer by searching for "numbers" at the Community Help site. It's really a great resource in addition to the online help files. Try it out!
    (It would have been the first result returned from the search...)
    http://www.adobe.com/support/aftereffects/

  • Best way to create a UI for a Composite app

    Hi all,
    What is the best way to create a UI for a Composite app that we are developing using CAF and GP.
    1) WebDynPro Callable Object that implements GP Interface.
    2) Consume the Application services(exposed as web services) in WebDynPro app
    3) Creating a WebDynPro Model for the CAF Services.
    4) Create a WebDynPro Application Callable Object (If yes how can we map the input and output params b/n WebDynPro app CO and CAF Application service).
    Plz do remember we are using GP here.
    Thanks in advance,
    Best Regards,
    Sudheer.

    Hi,
    You can use Web Dynpro or Visual Composer for designing UI for your CA.
    1) WebDynPro Callable Object that implements GP Interface.
    You can use Web Dynpro Component CO to use a single Web Dynpro component in your GP Activity.
    4) Create a WebDynPro Application Callable Object :This is for entire Web Dynpro Application(multiple components).
    2) Consume the Application services(exposed as web services) in WebDynPro app :
    3) Creating a WebDynPro Model for the CAF Services.
    For example, in updating operations first we have to get the existing data from Database.For getting this data you can use application services in your Web Dynpro component.Later expose this WD component as CO insert in a GP activity.
    For creating operations, you can use Web Service CO(Application Service)  directly in GP Activity.
    These links are useful for you.
    [link1|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
    [link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
    [lnk3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1078e3b0-ec5d-2a10-f08a-c9b878917b19]

  • Best way to create Math-Book for several devices

    Hello,
    I have written some Books about Mathematics and past months I rewrote the first one directly in iBooks Author - My original files have been written in WinWord 15 years ago, so there was only plain text, I could copy/paste into iBooks Author. The rest I had to edit completely new in LaTex in iBooks Author. Now I see it was the wrong way because it is pain in the *** to come back from ibook-Format to ePub and other formats to also sell them at Amazon for example.
    So I hope to get some Pro-Tips for the best base format for easiest export to all possible formats. Of course ibook has more possibilities, but it would be a way to have a base version as epub, pdf, etc and then import into iBooks Author to make an extended version with videos, etc.
    Would pages be the best way to make a base version (as far as I have seen there seems to bee a pay to export to ibooks Author and also to make ePub-version)? Or maybe making an HTML-Version with calibre (I think this is possible in calibre).
    Problem is simply that I have so much Mathematic expressions in my books and so I need LaTex for best presentation and design.
    Has anyone experience with creating Science Books?
    But second problem of course is still to find a way to get an ePub version of my ibooks-file. So far I did not find a way to export the book including LaTex source.
    I so much would appreciate some good advices on this...
    Thank you so much in advance!
    Bye
    rockie

    Hello RoberRM,
    I am sorry that I can not give you a convenient solution for our problem. I finally went the same path like with my first book: I mainly target at students with iPads, so I decided to get the best out of iBooks Author to get the full palette of features. I simply did not want to stumble into experiments with uncertain results.
    Maybe later on I will go the hard way to copy and paste text and latex part of the books into pages. I will see if it will be worth the efforts...
    Besides this the workflow in iBA is simply more effective and time saving. So, at the moment for me everything points into the iBooks Author direction.
    Maybe in later versions we will have ways to export into other formats.
    Bye and good luck with your work!!
    rockie

  • Best way to create placeholder frames for XML import

    This is my first attempt at importing XML into ID (CS2), my client has given me an Access database that includes about 150 records that include several fields of data, including an image file and a few brief paragraphs of descriptive text.
    The goal is to have each record occupy a page in the layout.
    My goal is to set up one initial page with a placeholder frame or frames and have ID automatically duplicate for all the records. And that's my question...do I create multiple frames, one for each field in the database, or do I create one frame and just tag various elements within the single frame?
    If I create multiple frames, I'm thinking I would have to copy/paste the group onto each new page (or am I wrong?)
    If I create one single master frame, then InDesign would just consider all the content one story and automatically create as many threaded frames as are needed--right?
    The other consideration is that the field containing the descriptive text will vary in length with each record and I want to make sure that there aren't inconsistent spacing issues happening, as would probably be the case if I created a unique frame for the descriptive text.
    I hope I'm being clear...would somebody who's done this type of thing before please advise me on the best way to set up my placeholders?
    Thanks so much.

    Hi,
    You can use Web Dynpro or Visual Composer for designing UI for your CA.
    1) WebDynPro Callable Object that implements GP Interface.
    You can use Web Dynpro Component CO to use a single Web Dynpro component in your GP Activity.
    4) Create a WebDynPro Application Callable Object :This is for entire Web Dynpro Application(multiple components).
    2) Consume the Application services(exposed as web services) in WebDynPro app :
    3) Creating a WebDynPro Model for the CAF Services.
    For example, in updating operations first we have to get the existing data from Database.For getting this data you can use application services in your Web Dynpro component.Later expose this WD component as CO insert in a GP activity.
    For creating operations, you can use Web Service CO(Application Service)  directly in GP Activity.
    These links are useful for you.
    [link1|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
    [link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
    [lnk3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1078e3b0-ec5d-2a10-f08a-c9b878917b19]

  • What is the best way to create a bookmark for a returning user??

    Hello all... hello again Steve...I am back with another question- what is the best way to implement a bookmark system so returning users can pick up where they left off in an AW lesson? I have tried the usual internet searches, always do, but the few samples/answers I have found were AW5, not much help...
    I have a dozen or so maps attached to my framework, I would like a user to return to the last map he viewed before closing. (My AW is communicating fine with an Access database, so if passing a variable to Access and then back to AW when the lesson starts is on the right track, let me know...) If the answer here is too complicated, maybe nudge me in the right direction and I will dive back in.
    Thanks in advance to anyone who has some guidance, I really do appreciate it!
    Terry

    Try this outline, see if it helps ...
    Grab a reference to the Map as you enter it, then save that to the database when you leave.
    You want something that will give you the equivalent to a page number - if you have 7 maps hanging off the Framework, and the user is in the 6th map when he exits, you want to save the number 6.
    There are scores of ways to do this, but probably the easiest is just to attach a calc to each map that has this code
    (I don't have Authorwar handy to check syntax, so you should check!)
    BookMarkPage = ChildIDtoNum(IconParent(IconID), IconID) <-- tells Authorware to return the "page number" of the current map
    Save BookMarkPage to your Access database on exit .
    On return, read the bookmark back into BookMarkPage, ask the user if he wants to return to bookmark. If yes, use a calculated navigation that uses
    ChildNumToID(@the name of your Framework or it's ID, BookMarkPage)
    Note that you could wrangle something similar by saving the IconID of your Map, or the IconTitle, but both of these can break if you ever update your file by adding or removing pages, renaming them etc. With this method, all you need is a simple page count check that ensures that you are not trying to nav to a page number that does not exist (use IconNumChildren).
    Steve

  • What is the best way to create illustrator files for frames created in an InDesign layout?

    Is there a quick way to do that or do i need to note the size of each frame in InDesgin and then input that into the dialog in illustrator. It seems like a waste of time. Is there a better way?
    I am new to InDesgin. What I'd like is a way to automatically generate blank illustrator files  to fill in the graphic frames in my layout.
    Thanks,
    John

    I have no existing Illustrator files for the project. I'm tring to use InDesign to create a rapid protoype. I may be working backward from what is expected.
    If I could generate blanks that are the correct size that would be an easy way to get started on them, but copying the sizes to the new document dialog box in Illustrator is not a big deal either.
    I figured that if i could create an Illustrator blank from InDesign that would get me started in illustrator quickly and also place the new file in the frame.

  • Best way to create a playlist for sharing? having some issues

    So my friends and I like to exchange playlists. So I'm trying to create a compilation that when my friend drags the folder of music into his iTunes the order of songs is how I want it. I want it to import into their iTunes like a regular compilation album.
    Issues this time around:
    - I can't for the life of me make it so the order of the compilation imports in the right order
    - One of the songs REFUSES to change info. I change the name of the album to the comp title and select "part of a compilation" it changes but then as soon I play it it changes back to it's original album title and is no longer part of my compilation
    What I've done:
    - Picked the tracks I wanted and dragged them into a folder on my desktop
    - imported them into a playlist in a different iTunes library
    - Selected all, command+I, changed the album to the compilation name, marked it as a compilation, marked it as Disc #1 of 1
    - Selected each track separately and marked the Track #1 of 15, 2 of 15 and so on
    is there something I should be doing differently for better results?

    Thanks, Jason...mostly just for neat and clean.
    But, John also said we'd have to create an ADS Group to put them in, and use queries to bring those that need into the collection for installation, then remove them when the product shows in ARP.  Which is about the same as adding them into the collection
    and then never removing (we'd have a group with computers in it).
    I had thought there was some way to automatically remove things from manual collections, but...guess not.

  • Best way to create a collection for on-deman installs as required, but, that automatically removes clients after the install

    SCCM 2007 SP2 R3.  We do "on-demand" installs by having collections setup targeted with advertisements for various products, say Adobe Acrobat Pro, and when we get a request, we manually drop the client into the collection and the install
    starts in a few minutes.
    Problem is...some staff forget to remove the old clients from the collections.
    Can a query be setup to automatically remove the client from the collection post-install, when the collection refreshes?  Problem we are seeing is that whether we use a query for HAVING or for NOT HAVING the product, it then brings in all the other
    computers that don't have the product...
    Any way to do this, or, we have to continue to manually remove post-install?
    Thanks!

    Thanks, Jason...mostly just for neat and clean.
    But, John also said we'd have to create an ADS Group to put them in, and use queries to bring those that need into the collection for installation, then remove them when the product shows in ARP.  Which is about the same as adding them into the collection
    and then never removing (we'd have a group with computers in it).
    I had thought there was some way to automatically remove things from manual collections, but...guess not.

  • Best way to create unpriviledged user for rsyncing backups?

    I'm wanting to use <code>rsync</code> or <code>ssh</code> with RSA authentication in order to automate moving backups  for multiple servers to a centralized/dedicated machine.  I'd like to know what you guys would recommend as far as creating a user to do that job on each of the servers...they won't ever have to have shell access or anything, but just enough priviledges to run the cron job itself.
    I've read around a few places, and one suggested something like this:
    groupadd -g 3500 backup
    useradd -u 3500 -s /bin/false -d /backup -m -c "backup" -g backup backup
    Does the gui/uid number really matter?  Is there anything else I'll have to worry about?  After that, I just planned on doing a <code>su -m backup</code> and then generating the keys.  Any help/suggestions would be greatly appreciated...

    Thanks for the link...I'll probably just go ahead and mess around with it.  It's not too difficult to make changes later.

  • What's the best way to create zoomable map for iOS by using Flash?

    We got a big location map that allows user to zoom in and out and do the panning but the image of the map is not very smooth when you  pan it in iOS (Android is ok) so is there a way to fix this problem?
    thanks!

    Which one you use might depend on the nature of the picture, like, a picture with lots of flat colored areas will come out a lot smaller as a lossless PNG than as a 100% JPEG. It would be interesting to try an 8 bit or 16 bit PNG, see if that makes it use less GPU memory. JPEG is usually 24 bit, and it or a 24 bit PNG should take the same amount of GPU memory.
    There is a chance that AIR is using 32 bit throughout on iOS, so it won't matter what the original image was if that's the case, just the width and height would determine the amount used.
    The smoothing setting is more about whether you're going to scale the image, which I guess you would be if you want the image to be scaled down. If you could have a smaller version that the user then touches to go immediately to the larger version, both could be set to have no smoothing, which may improve performance.

  • Whats the best way to create USER variable in BI Apps?

    I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
    We have USER variable already defined in the BI Apps rpd.
    In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
    Whats the best way to create USER variable for EBS Security Context init block?
    1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
    And i was told that it should not be done.
    Let me know how can it be done.
    Thanks
    Ashish

    Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
    Thanks
    Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

  • The best way to make proxy files for editing?

    Hi,
    What is the best way to create proxy files for editing? I'm thinking Apple ProRes 422 (Proxy). The original material is DVCPRO HD 1080i50, shot on Panasonic P2 cards, and copied on to hard drives. But as there is about 400 hours of it, I desperately need to find a clever way to make smaller proxy files for editing.
    I would also like to make the proxies at a smaller resolution than 1080i for the editing process.
    I guess it's possible to import the media and then batch export it to the proxy format, but Is there a better way?

    I'm not able to ingest the material directly from the P2-folders as ProRes 422 (Proxy). No matter how much I change the import settings in "Log and transfer", it still ingests as DVCPRO HD 1080i50.
    Correct. DVCPRO HD P2 can only come in as DVCPRO HD. You can't transcode it. AVCIntra P2 is what you can bring in as ProRes. (Sorry Tom).
    I can of course transcode it form there to the proxy format and delete the ingested files,
    Why? Why do that? You have ingested all the files, right? You ALREADY HAVE THEM...right? Why not work with them? You obviously have the room (20TB). Why import all this, then now take the days it would require to make proxies?
    Making the ProRes-proxies directly from the P2-material seems more logical, or isn't it?
    DVCPRO HD P2 cannot come in as anything else, so the offline/online workflow for them doesn't work unless you import it all, then transcode to a smaller format...but then need to keep the originals online to relink to when you are done. If you wanted to do an offline/online, you needed to research this better...or test it...before you shot your hundreds of hours only to find that what you want to do won't work.
    Shane

Maybe you are looking for

  • How does iCloud Photo Library and Optimize iPhone Storage Work?

    Even Apple Phone support can't answer these questions: How does iCloud Photo Library (Beta) from yesterday's 8.1 update with Optimize iPhone Storage turned on work? (I'm on an iPhone 6) It only stores your iPhone/iPad versions on your device, which i

  • Set password for pdf,plzzzzzz help

    hello everybody, i'm developing a software in which i let the user to import their pdf and open those pdf .pdf will be open in a acrobot reader. now i want let the user to set password for his pdf file to protect his file from unauthorized access. un

  • Stop Lightroom 2.4 from Importanting Images w/camera connected

    I want to stop LR 2.4 from auto importing images when I connect my camera. I have tried many times to set "Preferences" so it would not auto import images when I connect my camera (Edit > Preferences... > Import > (uncheck box) next to "Show import d

  • Block corruption error in system datafile

    Hi Guru, There is a problem in system datafile of production database, one of the block has been corrupted.we have set the configuration of RMAN with SBT_TAPE for backup. when we try to recover using then following commands then we get some error. Pl

  • Some Photos are blank after conversion from Aperture

    Library contains 45K photos .. migrated from Aperture.  For some reason a large number of the photos have meta data but are blank.  Where have they gone?