Best way to fill a datagird with A LOT of data?

What's the best way to fill a datagrid with A LOT of data.
I'm talking about something like 10,000 rows. Can the datagrid
handle it? No screen is large enough to show 10,000 records..... is
there a way to load 50, and then when a user scrolls down it loads
the next 50 etc...?

Right. It's not recommended that you load 10,000 rows into
the datagrid at once. Using the data management service with paging
enabled is a much better solution. See the Configuring the Data
Management Service chapter in the Flex2 Developer's Guide for more
info.

Similar Messages

  • What's the best way to partition my disk with Vista, Arch, and data?

    Hey everybody, I'm in a bit of a quandary here and I'd love a bit of help.
    I have a 320 GB hdd on my new laptop. I want to dual boot Windows Vista and Arch, with a shared partition for data in between. I have Windows Vista installed with 110 GB of unallocated space. (Windows, being a piece of crap, has gone and locked some stupid system files at the end of its partition, completely preventing me from shrinking it any further.)
    Vista has hogged two partitions for itself. One is C:, and I know what that's for; the other is D:, and I have no idea what lives on it. (In the off chance that anyone here knows, I'd actually like to find out what D: is doing there. It takes up 77 MB, 65 MB of which is empty, and is always "in use," and yet Vista's file manager says there's nothing in it.)
    ANYWAY: Vista's taken up two partitions, and I need at least two for Arch: / and swap. Ideally, I'd like to have one for /home as well, but i don't know if that possible. I also really, really want to have a shared partition for music and documents and such for both OSes.
    I thought at first I could stick all of Arch into an extended partition, but I read here that they can't be booted from. It doesn't make any sense to put my data partition into an extended partition, and Windows won't work either. What should my partition scheme be, since I apparently am going to need to put 5 primary partitions on one disk?
    If you've gone this far, thanks for reading my wall of text. Any advice you can give would be deeply appreciated.
    UPDATE: Okay, after doing a bit more research, I've read in a couple of places that Linux can be installed to a logical partition as long as I make sure GRUB (installed, I assume, on /dev/sda) points to it. Can anyone confirm this?
    Last edited by wirenik (2008-11-29 07:27:46)

    wirenik,
    You can't have 5 primary partitions.  4 max, or 3 primary partitions, and a bunch of logical partitions grouped inside an extended partition.  Arch will gladly install into a logical partition.  (Yes, it will boot just fine too )
    If you currently have 2 partitions, you could create one more primary, then use the rest of the disk as an extended partition.  You will then be able to create as many logical partitions as you want (well, a bunch anyway).
    Something like this:
    /dev/sda1 (primary, Windows C)
    /dev/sda2 (primary, Windows D)
    /dev/sda3 (primary, Arch root)
    --- Extended partition ---
    /dev/sda5 (logical, Arch /home)
    /dev/sda6 (logical, swap)
    /dev/sda7 (logical, shared data)
    Last edited by peart (2008-11-29 07:26:07)

  • What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera?

    What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera? It says the utility disk is a PowerPC app and that is no longer supported. What do I do now? I can't upload photos from my camera.

    Also, I had the same problem happen when I tried to install an older version of Corel Painter. Are Macbook Pro users just NOT supposed to be able to use their laptops for the purposes they are best designed for?
    -Frustrated new Mac user

  • Best way to build a website with hundreds of pages

    What is the best way to build a website with hundreds of pages that include businesses in every city of the U.S. I will be building it in Dreamweaver CS4 and pulling the data from an MS Excel spreadsheet.
    I started building it by building the first page and then saving a new page with new data and so on.
    There must be a way to pull from the Excel doc without copying and pasting each page of data, and there must be a way to build this site smaller and easier to make changes when needed.
    Thanks

    You already have other people addressing the DB issues - so I will bring up the other... You are just saving a copy as a new page and then copy and pasting the changed content into  it?
    What you want to do is take the first page, once you have your design done - and save it as a template (file - save as - Dreamweaver Template).
    Then you want to select the areas (most likely the divs you have content in) that will have content changed, and select the div or p or whatever element... and go to Insert - Template Objects - Editible Region.
    Make sure you don't made editable the areas that are the primary design - such as a logo element, a header image, the navigation etc.  If you want to change those - you would do so by making the change on the template, and then it will automatically update all pages made based on that template.
    Once you are done setting up the templates - go to your new page and choose Modify - Templates - Apply Template To Page
    Select the template you just created (note it will be placed inside of a new folder titled "templates" automatically by Dreamweaver).
    Now, any of the areas you selected to add different content into will be selectable, and you can copy/paste or however you are doing so.
    Good luck

  • Best way to share a video with someone in another city...

    What is the best way to share a video with someone in another city?
    I know that FCPX contains all sorts of share options which create different resolutions and file sizes appropriate for different sites like YouTube, Facebook, and others.  But how to create the videos really isn't the problem.
    I want to know how to share them.  I'm creating videos that are ultimately to be viewed on the internet.  When I have a completed video, I want to show it to the person who it is for before I finalize it.  I know that if it very small, I could email it.  And if it's larger, I could use something like Dropbox.  But I don't necessarily want them to have a copy of it (though I could do that and put a watermark on it).
    I'd like to upload it to a site like YouTube or Vimeo, but those sites seem to be about sharing videos with a wide audience.  I know you can make a video private on YouTube, but, from what I've read, they permanently have the right to use the content, which I definitely don't want.
    So what's the best way to do this?  I'm going to have to do it regularly, so I'm willing to pay for a service if it assures privacy and does not try to assert some right to my content.
    I know there is an issue to be considered with people screen capturing content, but I'll use a watermark to lessen the chances of that.

    Hi Russ--
    I'll have to read through Vimeo's terms of service, but I have to think they're asserting some right to the content like YouTube does.
    Plus, these are commercial videos, and I don't think they allow that.  Of course, if they're private, I'm obviously not trying to sell anything.  But I have to think that it somehow is against their TOS since me posting a bunch of private videos that nobody can see really doesn't do them any good at all.

  • What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

    What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

    You can't share with other devices if you are using different Apple ID's and iTunes account on them. You can only share if you use the same ID.

  • Always used 1 main account.  Started using individual user accounts. So how do I use software or applications with a lot of data like Quicken under my own user account?

    I recently upgraded our family's mac to OS X.  I thought this was the perfect time to create and use "user accounts".  We had always used 1 main account.  So how do I use software or applications with a lot of data like Quicken under my own user account?  I wanted to be able to manage my own itunes library, iphone apps, messages.  But I still really need to use the Stuff I have in Quicken essentials.  I don't want to have to restart all my work done in Quicken already.

    I haven't used Quicken in a while, but most applications store your files in your Documents folder. Is that where your Quicken data file is? What you do next depends on how many family members need to get at that data.
    If multiple family members need to use the Quicken data file, try moving it to the Documents folder in the Shared account. That is an account that all accounts can see. It's at the same level as the other accounts. In other words, Shared is one level up from your Home account, or Hard Drive/Users/Shared.
    If you're the only one allowed to see that Quicken data, move the Quicken data file from the old main account to your account, and don't leave a copy behind. You can use the Shared folder as a way station for the transfer since you won't be able to see both accounts' Documents folders at the same time (because you're not allowed to peek into other people's accounts). Or you can use another disk or server for the transfer, as long as you can get to it when logged into either account.

  • I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did.

    I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did. But some reason the app Clash Of Clans did not. Thank you.

    If I wiped my phone I wouldn't have the contacts on my phone to send to my self.    I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

  • Best way to fill CLOB with external XML from URL

    There seem to be a number of great tools available for pl/sql developers in the 8i DB environment and I am tryng to get a handle on them. So far I have worked with XSQL servlet (not PL/SQL), XML Parser and XSU.
    The problem I have is to fill a clob from an external xml file via a url and then make that clob available for DBMS_XMLSave to insert into DB. What is the best way to do this? I am thinking maybe I have to use utl_http or utl_tcp to fill the CLOB since I can't seem to find a method in the pl/sql XDK?
    XSU - can easily generate CLOB from a query but in this case it is not a query, it is XML from url
    XMlparser - can read in from a url using parse() but the document returned is a DOMDocument rather than CLOB.
    -quinn

    There seem to be a number of great tools available for pl/sql developers in the 8i DB environment and I am tryng to get a handle on them. So far I have worked with XSQL servlet (not PL/SQL), XML Parser and XSU.
    The problem I have is to fill a clob from an external xml file via a url and then make that clob available for DBMS_XMLSave to insert into DB. What is the best way to do this? I am thinking maybe I have to use utl_http or utl_tcp to fill the CLOB since I can't seem to find a method in the pl/sql XDK?
    XSU - can easily generate CLOB from a query but in this case it is not a query, it is XML from url
    XMlparser - can read in from a url using parse() but the document returned is a DOMDocument rather than CLOB.
    -quinn

  • Best Way to Fill in a Shape

    I have the following graphic:
    It was actually a font originally but I converted it to paths. I'm wondering what is the best way to go about filling this in (so I can put color between the black outline)? It seems as though when I change the fill, the outline of the graphic is what changes. Sorry if this is obvious but I searched and couldn't find a reasonable answer (maybe I'm phrasing it wrong?).

    [ / Off Topic ]
    DocPixel-BMW wrote:
    I'm only mentioning this BECAUSE of the new Help file system, and I think it would be to Adobe's advantage NOT to unnecessarily add information that is neither helpful, or even wrong. What kind of Help system is that going to be in a year or so. Even within these forums you have to wade through a lot of misinformation to find a correct solution... regardless of an answer being promoted to "correct" or not.
    To my knowledge, Not ALL forum posts are linked to the help files, only those marked as "[i] Community Help" and begin with a generic first post as "This question was posted in response to the following article:" , plus the related help page name, however without the product name involved.
    You are however correct that this whole system is a bad idea and is and will be a big mess. If these posts are unmoderated they will be a mess, with all types of garbage, if Adobe wanted to do this approach then at a minimum they need full-time people who monitor these related threads and clean them up and provide proper assistance and correct answers from with in Adobe themselves. Even if you use the search feature that is apart of "Adobe Community Help - Search Field" you get returns from third party sites, a lot of times the first return is from a 3rd part site, not just within the help docs themselves. How is this better than just googling? If I search Adobe I want only Adobe, if I want otherwise then I know enough to just google my queries. This whole system was certainly ill conceived and sent into the wild, resulting in a mess now and in the future.

  • Best way to fill this drawing I made.

    Take a look at this drawing its lots of lines basically. I need to fill it all with one color and I need to keep all the lines. What the best way to get this object filled without losing the lines and shape?

    If those are all separate graphics, ungroup them until they are all one on the same layer, make sure there are no gaps, and then use the fill tool in each section.  If you need to retain them as separate graphics, then copy them and do this to the copy and then take the fill you create and place it on a lyaer beneath the orginal.
    If the approach offered isn't going to work, explain how you created this.

  • Best way to share iTunes library with two user accounts?

    I have a single iTunes library on my Macbook Pro.  I would like to share between to user accounts, each with Apple ID's.  What's the best way to do so?  Right now, I've given the second user rights to read/write to the first users "Music" folder.  But when one user adds song files, the other must "Add Folder" in order to see the new purchases.  It's kind of putsy.  Is there a better way?  Thanks!

    Hello again,
    Have the iTunes Library located in the Shared Folder for instance and then launch iTunes in both users while holding option (or alt) on your keyboard. Choose the iTunes library file wherever it may be located. You can keep it in the same spot if you want (i.e. your Music folder). Many people have their's on a local network hard drive and do this.
    The benefit is that when one user updates the iTunes library file, the next user will open an updated version that has all songs that the other user added.
    Since you have one computer shared, this should be fine. I am unsure what happens when multiple computers/users access the library file at the same time.

  • What is the best way to manage multiple devices with one iMac - different users with seperate itunes accounts or one mac user with different itune logons and libraries?

    Hello
    I have just purchased an imac which I am very happy with.  In our household we also have two iphones (one mine and one husbands) and one ipod (my sons). We all have individual itunes accounts set up on our previous computer (not a mac). We have sepereate apps and music, although there may be the odd occasion where we would like to share a song (if this is possible) across devices.
    I am just wondering the best way to manage these devices using the new imac.  Should I create individual accounts to logon to the imac, then from within these launch our own itunes accounts and sync our devices with these.  Or should I be using one version of itunes, logging on to this with our different itunes usernames and storing things in libraries.
    Any help would be greatly appreciated. 
    Thanks

    I am presuming that we cannot share downloaded apps and music between accounts because of the copyright issue,
    Though I'm no copyright lawyer, as long as it's within a household, you can share content among users. Such sharing is, absent specific language preventing it not present in the iTunes Store terms of use, generally considered to be "personal use". So you can share apps and music amongst your users on your computer and with their devices. You just can't give any of that content to friends or relatives who don't live with you.
    What I am not clear on, it making sure that this appears in each itunes account - is it easy to find the file storage folders that match the itunes accounts and what would these be?
    The iTunes library and files are by default in a user's Home/Music folder. But you don't have to find the folder; in fact putting a file into the folder yourself won't add the file to iTunes. Just drag the file into the iTunes window. iTunes will copy it to the correct location.
    Regards.

  • I need to know best way to edit MXF files, with least rendering, is that converting the MXF or Log and Transfer? the end product is dvd, but I have lots and lots of these projects to do.

    I am about to comence my Edit, and was told of Mpeg Streamclip, however this doesn't seem to work with my Canon XF305 Clips, the reason I was told to use it was so I wouldn't have to Render in Final Cut Pro all the time.. I do have the Canon Disc with the Plug in Utility and the update from their site.
    Is it best to Convert these MXF files first and import them into FCP or use 'Log and Transfer', so far I am unable to do either!!
    The projects on the timeline will have introduction .Movs already on it as a Template to re-use again and again with the new Footage ( MXF Files ) to be added and edited with transitions etc..This process is repeated again and again but with different MXF clips each time.
      I am looking for the quickest and best way for workflow as there are 80 or more projects to do, each with 10 or so clips to be added to the timeline and Exported for DVD...Will I have to then Compress to fit onto DVD's??
    I know Streamclip is an Mepeg 2 app but I thought the Canon XF305 Shot as mpeg2....
    Is Log and Transfer my only Option?
    Basically I need to know the quickest for Render purposes, and of course, the best way so the files aren't so huge etc etc.
    Please, any suggestions would be greatly received....

    We only work with PR422 files in FC7.  We use Shane's workflow with all 5D & MXF footage.
    Make your life easier and stick to the ProRes family for your footage and edit sequences. Avoid H264 & convert any you have to ProRes.
    Unless you are considering Blu-Ray the only way to deliver video on a DVD is to convert it to SD.
    Depending on the length of your show you can make a Blu-Ray in Compressor but you have very limited authoring options when compared to DVD Studio Pro.
    Compressor can also convert your HD to SD mpg-2 & Ac3 files. The best results usually come from setting the frame controls in the mpg-2 setting of Compressor to best. Depending on the the length of the show and your Qmaster settings this can take quite a while.
    I personally find Compressor's HD to SD DVD conversion varies. Sometimes it is wonderful and sometimes not so much. I prefer the following as it is usually is faster and very consistent.
    Export a quicktime movie (not QT conversion) of your final sequence
    Import the exported HD file back into FC.
    Create a SD 16x9 sequence and then drop in the recently exported HD seq and render. Rendering the sequence basically has FC doing the HD to SD conversion. Export the SD sequence and then convert to mpg-2 & ac3 in Compressor. While this does take time I still find it faster than Compressor with Qmaster utilizing all cores.
    Another option is using jobs in Compressor
    http://pixelcorps.cachefly.net/macbreak-154-540p-h264.mov
    In this workflow you would have Compressor convert the HD file to SD and then through jobs convert the SD file to mpg2 & Ac3. 
    In theory the jobs version could be faster (based on a number of variables- length, Qmaster, etc) but I haven't had time to compare the two. 

  • How is the best way to export my project with clips and videos?

    I would like to save my project and export the project with clips and videos included. What is the best way to do it?

    Can you clarify:
    clips and video
    Seems as though you want to retain the original media?
    Export as a Master File to get a good quality export file of your Timeline.
    Al

Maybe you are looking for