BEx 7.0
Hello,
We have Installed BI 7.0 and we would like to use BEx 7.0 for the same. I have installed SAPGUI 710 with selecting all the options. We have also installed Microsoft framework 2.0. After installation if we navigate through BEx from windows it says "can only be used in SAP Netweaver 7.1". But the other options available were only BEx 3.x. When we execute the transaction code rrmx an excel sheet opens but the BEx options were disabled. Hope i beleive i miss something. Kindly help me on the same
regards,
MADHU
Hi Madhu,
In the settings of the BEx Analyzer you find an option for which Analyzer should be used ('old' or 'new'). Your settings are probably on 'old'. Start the NW2004s version of the Analyzer. Click the Global Settings on the toolbar. In order to launch new Bex ,the setting has to be made in the new BEx Analyzer, and is called "Launch legacy version from RRMX". Close the NW2004S Analyzer.
Please check this blog:
/people/prakash.darji/blog/2006/07/26/troubleshoot-the-sap-netweaver-2004s-bi-frontend-installation
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2ff1%2f0a551ce09411d2acb90000e829fbfe%2fcontent.htm
Hope it helps....
Regards,
Mona
Edited by: Mona Kapur on Jan 12, 2008 3:38 PM
Similar Messages
-
IF and ABS condition statement in BEX query designer
Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
ArnoldHi Arnold,
Thank you,
Nanda -
Inconsistency between Bex and Back end
Hello, I have a query about bex issue. I have few fields in my DSO/Cube which has data showing correctly in the back end but in Bex it shows partial of those values. like if i have something like this:
ZField
000000000000000000008
It shows correct in DSO table but in Bex it only shows the zeros. do you know why and how to get this to show the whole field value?
Thanks.
By the way this is a characteristic and not keyfigure.Hi Vekant,
If you have not did any speecific thing at query level then value should be shown correctly.
Please try this once and check.
Create new test query on your data target drag and droup your charecteristic.please execute your test query and see if you are able to see the correct value.
try this.
Regards,
Ganesh Bothe -
Error while trying to Open and Delete a BEx Query in Query Designer.
Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
ChanduArun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu -
Report performance while creating report on BEx
All all!
I am creating a report on BOE 4.0 on top of BEx connection as a source. I have developed reports on top of universe in the past and i know that if we keep calculations on reporting end it hampers the report performance. Is this the same case with BEx? if we are following the best practices is it ok to say that we should keep all heavy calculations/ aggregation on BEx or backend for better report performance.
Can you guys please provide your opinion based on your experiance and knowledge. Any feedbacks will help! Thanks.Hi,
Definitely best-practice to delegate a maximum of CKF to the Cube where possilble, put RKF in the BEx query, and Filters too.
also, add Default Values to your Variables (this will speed up generation of the bics transient universe)
also, since Patch2.10, we are seeing some significant performance improvements reducing 'document initialization' and 'time to prompts' by up to 50% (step such as these often took 1.5 minutes, even on sized systems)
Also, make sure you have BW corrections like this implemented: 1593802 Performance optimization when loading query views
In the BusinessObjects landscape - especially with BI 4.0 - it's all about Sizing and Tuning . Here is your bible the 'sizing companion' guide : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000738725&_OBJECT=011000358700000307202011E
Pay particular attention to BICSChunkSize registry settings
Also, the -Xmx JVM Heap Size for the Adaptive Processing Server that is running the DSL_Bridge service.
Regards,
H -
Hi
I created a query in Bex-Query Designer - 3.5.. Then publish that report in the Web by using Bex-Analyzer.
Suppose i have columns in the report like 'vendor' and 'PO Number'. When the cursor goes to 'vendor' column heading then im getting as <b>"Context Menu for vendor"</b> by default.
i dont want by default .. I want to make this by custome (like i want Vendor Analysis) . How can i get this
please let me know
kumarHi ravi
Yaa im asking same thing. When i put cursor on the 'vendor' or 'PO number' then im getting "Context Menu for vendor " or "Context Menu for PO Number" by default.
I dont want this one. I want custom one like "vendor Analysis" or "PO Analysis".
How can i get this one . pls let me knpw
i ll assing the points
kumar -
How can we remove the commas from the Formula value in SAP BW BEx query
Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards -
Concatenation of Data from 4 infoobjects into a single cell in Bex Report
Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
<b>****Points will be awarded***</b>Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
<i><b>****Points will be awarded****</b></i>
Regards,
Hitesh Shetty. -
Variable screeen popup with button in bex
Hi ,
When I try to display variable screen using a button in bex, I get the following error. has anyone come across this. pls advise.
BExItemButton.RenderData01: Unable to get the Item property of the OLEObjects classErr: Unable to get the Item property of the OLEObjects class
KartheekSounds front end related, are all your Front end patches (FEP) upto date. Might be worth downloading FEP 11.
Cheers,
Pom -
Error while running query in BEx
Hi Experts,
when i am running a query i am getting this error in BEx: "Value 'First NameAPPROVER1' (hex. '004600690072007300740020004E0061006D00650041005000') of characteristic ZZNAME1 contains invalid characters,Error while reading data; navigation is possible
I>> Row: 121 Inc: EXECUTE Prog: CL_RSDRV_SRVS_SID).
Please suggest how to solve the error.
Regards,
AKSINGHThanks All,
Problem Solved -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
Error while generating PDF - in Bex Web
Hi Experts,
I am currently having the issue that I receive the error "Error while generating PDF" when using the "Print Version" functionality. This problem only occurrs for the Bex Web Query. I know that the ADS service is configured correctly- The webservice test is successful and other applications (Guided Procedures, MSS) also use it successfully.
Please see below the excerpt from the default trace:
A message was generated:
ERROR
Error while generating PDF
com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
Message: 28
Stack trace: java.lang.ArrayIndexOutOfBoundsException: 28
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.getColumnSizes(SizeCalculator.java:178)
at com.sap.ip.bi.export.impl.ExportController.setSizes(ExportController.java:220)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:611)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:408)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:336)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:453)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:105)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:252)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:3809)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:3867)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:3510)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3470)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2489)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:892)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:813)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:456)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
If you have any idea or clue it would be greatly appreciated.
Thanks in advance for every support,
JanHi Jan,
Most possible causes for encountering this issue are:
Possible cause:
- The ADS is installed on a plattform, that is currently not supported by SAP for ADS. Please check the avaliablity at: Product Availability Matrix
- Mixing of different Netweaver releases (NW04 and NW04s) -> This is unfortunatelly not possibble the J2EE engine release has to match with the ABAP stack release in order connect them properly.
- The ADS SP level does not match the J2EE engine SP level. -> Please update the software components to have the same support package level.
Hope this helps!!
Regards,
Arafat -
Error when starting Bex analyzer
Hi All!
We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
<install error> Missing ActiveX component: Business Explorer Global Services
Does anyone have a hint on what to do?
Thanks for your help!
Best Regards
Pontushi
try to check with SAPBEXC.xla
and take a look oss note 585643
may need to manual register .dll with regsvr32
Do an Installation check of the BEx Analyzer as follows:
In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls. -
I am not getting the data in Bex from the cube
Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
BhaskarHi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh -
Field Explorer in Crystal Reports does not show the same names as Bex Query
Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advanceHi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo -
Two problmes between Crystal Reports 2008 and Bex Query
Hi Gurus.
I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
1) I have defined some Parameters Fields using the follow options:
Type: String
List of Values: Dynamic
Value Options Level1:
Show on (Viewer) Panel :Editable
Prompt text: <text>
Sort Order: Ascending by value
Prompt With description Only : False
Optional Prompt: True
Allow multiple values: True
Allow discrete values: True
Allow range values: False
When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
There is any option to ability this option in the infoview.
2) My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
Thanks.Hi Abhilash.
Thank you for your information.
1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
Thank you again.
Maybe you are looking for
-
Whats the difference between producing output and returning a value?
I've just started learning Java. I am having difficulty understanding what it means to "return a value". If a method has an argument, then whenever this method is called the variable named will be used for output. If you create a method to return a n
-
Drag and drop problems in 10.7.2
Hello! I´ve a MacBook pro 13" with stock 10.7.2, when I drag and drop several files, the shadow of the files freeze on the screen, and there´s no way to remove them other than force quit the Finder. It´s quite annoying. Any idea on this? Best Regards
-
How do you download airplay to your iphone and where is the software located?
-
Cannot able to delete the Analytical Workspace and its objects.
Hi, My Analytical workspace (11.2.0.2 B) seems to be corrupted. I could not able to attach the workspace through AWM and i cannot even able to delete it. I found there is no other session attached the Work space. I used the below query to find the lo
-
Re-installing Creative Cloud in a computer that crashed
I have installed Creative Clould in my desktop and my primary laptop (A Lenovo ThinkPad T530). Unfortunately, the hard disk of the T530 failed. In restoring this computer to "good health", this would mean that Creative Cloud would need to be re-ins