BEx Authorisation: ODS objects

Hi,
RS_COMP only has a line for specifying authorisation for InfoCubes. Is there not an equivalent for ODS objects. RS_ODSO does not provide the same nature of authorisation.
Any idea?
Regards, Lea

Hi Lea,
specify the ODS name: the matchcode is a little bit unfaithfull. For more infos see OSS Note 540720 - "FAQ: Information on S_RS_COMP and S_RS_COMP1". There's written:
1. How can I create authorizations for other InfoProviders besides InfoCubes? The authorization objects only provide an INFOCUBE field.
The authorization object was created when only InfoCubes existed in BW, which explains why this field was selected.Since you can no longer change authorization objects, this name remains even though, technically speaking, the field is used to check the InfoProvider.This means that you can specify any InfoProvider (such as InfoCube, InfoSet, MultiCube) with the INFOCUBE field.         
... and I would add "ODSs"!
Hope it helps
GFV

Similar Messages

  • Significance of BEx Reporting flag in ODS objects

    Hello Masters,
    I would like to know in detail, the Significance of BEx Reporting flag in ODS settings. What happens if we flag, and hat happedn when we dont ?
    If, Transaction Data is loaded into the ODS,  without loading the relevant Masterdata in advance, are SID's created, as it happens in cube ?
    IS there a connection between SID's and ODS objects ?
    best wishes,
    i BI

    Hi,
    From SAP help : With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
    http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/content.htm
    Hope this helps...

  • Unable to see ODS Object in BEx.

    Hi all,
    I am unable to see an ODS object in BEx, which is an active ODS Object with data in modelling.
    Can any one show me a way out, how to find this ODS object in BEx as well.
    Thanks in advance,
    Regards.

    Hi Robert Zovic
    Thanks for your answer,
    When I switced on th same..following is the eror message:
    The BEx Reporting was switched on for ODS object 0RPM_DS02 ---> long text
    Message no. RSDODSO157
    System response
    When activating ODS object 0RPM_DS02 SIDs have to be got for all characteristic values in the ODS tables, provided that these characteristic values are not already assigned any SIDs. This is required because the SIDs are used in BEx Reporting.
    The activation of ODS object 0RPM_DS02 can thus take a while longer.
    Procedure
    If the activation of ODS object 0RPM_DS02 terminates due to timeout you have to activate the ODS object with the program RSDG_ODSO_ACTIVATE in the background.
    I'm working on this, is there any other way out for the
    same.
    Thanks.
    Regards.

  • BW statistics for ods objects

    Hi Everyone,
    In the search criteria I found documents only for bw statistics for infocubes. but not for ods objects.
    After executing the queries for the ods objects in the bex, the entries are not made in rsddstat table, then where else it is store.
    Can anyone please let me know how can I find the query runtime of ods objects.
    Thanks,
    Prashant.

    Hi,
    Yes I marked for the ods objects also for olap and whm, and executed the query in bex analyzer but still I do not get any entries for these objects in RSDDSTAT table.
    What could be the problem. Is there a different procedure to find the query runtime of ods objects, please let me know.
    Thanks,
    Prashant.

  • What is the ODS object settings?

    What is the ODS object settings?

    Use
    When creating and changing an ODS object, you can make the following settings:
    BEx Reporting
    With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
    ODS Object Type
    Select the ODS object type. You can choose between standard and transactional, whereby standard is pre-installed and transactional is only meant for special cases. You can switch the type as long as there is still no data in the ODS object.
    See also Transactional ODS Objects.
    Unique Data Records
    With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system u2013 otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
    Note
    You can also deselect this indicator again (even if data has already been loaded into the ODS object). This can be necessary if you want to re-post deleted data records using a repair request (see: Tab Page: Updating). In this case, you need to deselect the Unique Data Records indicator before posting the repair request, following which you can then reset the Unique Data Records indicator once more. The regeneration of metadata of the Export DataSource, which takes place when the ODS object is reactivated, has no effect on the existing data mart delta method.
    Check Table for the InfoObject
    Here the name of the InfoObject is displayed for which the ODS object is also the check table, if necessary. You can specify this when creating an InfoObject. See also Tab Page: Master Data/Texts in the InfoObject maintenance.
    Automatically Setting Quality Status to OK
    With this indicator, you can determine that the system automatically sets the quality status to OK after loading data into the ODS object. You should turn on this function. You should only deselect this indicator if you want to check the data after it has been loaded.
    Automatically Activating the ODS Object Data
    With this indicator, you can establish that the data that has Quality Status OK be transferred from the activation queue into the active data table, and that the change log is updated. Activation is carried out by a new job that is started after loading into an ODS object is complete. If the activation process terminates, there can be no automatic update.
    Automatically Updating Data from the ODS Object
    With this indicator, you can establish that the ODS object data be automatically updated. Once it has been activated, the data is updated in the data targets. An init. update is carried out automatically with the first update. If the activation process terminates, there can be no automatic update. The update is carried out by a new job that is started once activation is complete.
    Note
    Only activate automatic activation and updating if you can ensure that these processes do not overlap.
    If you use process chains to guarantee serial processing of the process, these settings are not supported for the object (with the exception of setting the quality status). Then you have to include the automatic processes as process types in the process chain.
    Also refer to the example for Including ODS Objects in Process Chains.

  • Unable tp create multi provider for  ODS objects

    Hello Gurus,
    I want to create a multi provider or an Z ods object. When I do the same it does not show me the Z ODS objects. But it shows me the Standard SAP ODS for creating multi provider.
    thanks in advance
    rgds

    Hi,
    For the ODS that you are trying to use, check if the BEx reporting has been turned on in the ODS object settings. If it is not, then you cannot use it in a multiprovider.
    Hope this helps...

  • Error while activating ODS Object

    Hi,
    I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
    -Value '20060 ' of characteristic 0CALQUARTER is     not  plausible
    -Error when assigning SID (details in long text)
    -Activation of data records from ODS object ZODS_02 terminated
    -Error getting SID for ODS object ZODS_02
    I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
    Regards,
    Raj

    Raj,
       you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
    you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
    Possibilites:
    1. updtae rules
    2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
    3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Linking two ODS objects using a multiprovider

    Hello Gurus,
    I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many.
    My questions would be....
    1)When the relationship is one to many can I set it up in the multiprovider to sum it up and show in the report?
    2)I have 5 other charaterstics that I need to report(Slice and dice) on, but these are not common ones to both ODS objects. Is it possible for the user to get the report based on these charaterstics also? Or do I need to make sure that these 5 also exist in both DOS objects?
    Thank you,
    DM

    Hi Sh,
    Thank you very much for your reply. But I have few concerns.
    1)One to many relationship will not have any effect on the data linking since the multiprovider clubs the key figures on common characteristics. I tried this on the system and it worked.
    2)The problem would be not having similar characteristics on both infoproviders. So if I want to report on the chars individually it will have a problem( Will come as non assigned values)
    But the documentation says the multiprovider supports Homogenous and Heterogeneous cases. Please refer the following link.
    http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
    I am not sure what I can do now....whether to get all the characteristics in both infoproviders by enhancing the them. Or is there another way?
    And lastly the scenario I am looking at is billing and cost of goods. So I might find records in cost of goods which may not have corresponding records in billing.(There can be goods in stock which need to be billed)The problem would be the way multiprovider link records(union) so it will have all the records from both sides even if they do not correspond to each other.
    Let me know what you think.
    Cheers,
    DM

  • How to create ods object with overwrite option

    Hi all,
    I have two ods objects for Billing and Delivery and one cube for Sales.
    Billing and Delivery ODS objects are based on item level data source while sales cube is based on Schedule line level data source.
    Now i want to create a new ODS object which will get the data from these there object and update the ods object.Basically i want all the sales order attributes and billing quantity and delivered quantity from the ODS objects.
    how to update the new ods object in overwrite mode ??/
    Regards,
    Viren.

    HI,
    yes OK but what i mean is that (you might have a perfect reason for this) normally it's nota good idea to have an info cube as a data source (for Performance, look-up reasons etc). If your goal is to load Billing/Delivery/Sales data into one ODS, then make sure that you model this correct.
    If you want to use the ODS'es as data sources I would recommend you to use and ODS as data source also for the Sales data.
    Kind regards
    /martin

  • Error while activating ODS Object (urgent)

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log  --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.     
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Hi venkat,
    There are only 3 info objects which  i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
    Is this issue is related to any authorization concerned?
    Urs,
    Raki.

  • Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Frank,
    There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
    Strange i m unable to find out the solution.
    Urs,
    Raki.

  • Error activating ODS object.

    Hi Experts,
    None of the ODS objects gets activated and following are the error messages that i get when i try to activate a ODS object :
    Object ZRSMODS could not be activated
    <b>
    "</b>
    Message no. R7I028
    Transfer structure prefix for source system T90CLNT090 is not defined
    Message no. RSAR325
    Diagnosis
    A prefix is defined for the source system for determining cross-system unique transfer structure names. This prefix is not defined between your source system T90CLNT090 and Warehouse T90CLNT090. There was probably an error when creating the source system.
    Procedure
    If you have not yet loaded data from this source system, delete the source system and then recreate it.
    If the problem occurs again, check the SAP Support Portal. Create a new problem message, if necessary.
    Error when creating the export DataSource and dependent Objects
    Message no. RSDODSO169
    <b>"</b>                                                                               
    Pls send a solution asap. Thank you for the same.

    Hi Aravind,
    Have a look on the following points and see if they are satisfied in your case:
    Check all characteristics involved as described below:
    1. Check the Compounding and Attributes tabs in the characteristics maintenance.
    2. All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    3. After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
    Because of this you may sometimes get the same error while activating the ODS object.
    Hope it helps...
    Best Regards,
    DMK
    *Assign points if it helps...

  • Error on activation of data records from ODS object

    hi,
    Kindly help with my BW Problem, the error occured on the
    activation of ODS. The error says "<i>Request
    REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
    status green before it is activated</i>" and "<i>Activation of data
    records from ODS object ZPUR_O01 terminated</i>"
    I tried to check the data in the ODS Object by choosing
    <LS>Administrator Workbench > data targets > context menu on ODS
    Object ZPUR_O01 but the status are green and when i tried to
    activate it the logs says "<i>ODS object ZPUR_O01 was built
    incorrectly. Cannot update request
    REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
    ODS object ZPUR_O01 was built incorrectly. Cannot update request
    REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
    ODS object ZPUR_O01 was built incorrectly. Cannot update request
    REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
    Data to be activated successfully checked against archiving
    objects                                   
    Activation of data records from ODS object ZPUR_O01 terminated</i>"
    Please help me with this problem.

    Hi Jay
    U need to update these requests to ODS
    REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
    REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
    REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
    1) delete the current request
    2)Reconstruct the requests above three request
    3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
    Then only u will be able to activate the ODS....
    This is an serialization issue...
    hope it helps
    regrds
    AK
    assign points if usefull

  • Error while activation of ODS Object.

    Hi,
    I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
    -Value '20060 ' of characteristic 0CALQUARTER is not plausible
    -Error when assigning SID (details in long text)
    -Activation of data records from ODS object ZODS_02 terminated
    -Error getting SID for ODS object ZODS_02
    I could see that Calendar Quarter as 20060 in table /BIC/AZINV_O0240. There is a calendarday mapped to quarter and year in update rules of ODS object. How the calendar quarter is populated in update table in BW. How should i get rid of this error. Any idea would be appreciated.
    Regards,
    Raj

    don't post same issue twice. Bhanu working on your thread.
    check this ...
    Raj,
    you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
    you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
    Possibilites:
    1. updtae rules
    2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
    3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Error while loading data to ods object from flatfile

    hello all
    Iam loading data from flatfile to ods object and the processing type is PSA and then to data target(package by package),data arrived in PSA(its green) but in monitor the request is in red and in details tab of <b>subsequent processing</b> <b>its showing as ODS activation</b><b>?(change-log):not yet activated</b> and overall the error is <b>Missing Messages</b>.
    and its also saying like "Activation of data records from ODS object ODS_SALES terminated.
    and in help node its saying like data arrived in BW and try to change the request from red to green?
    can anyone tell me what will be the problem?
    In settings of ODS object everthing is set to automatically.
    many thanks
    balaji

    Hi praveen
    problem is <b>generic</b> here.
    In monitor tab the <b>request</b> and <b>overall</b> the statuts is "<b>RED</b>",but when I went into the <b>mange</b> tab of ODS object here the request is "<b>GREEN</b>",but the data is not available here.but data is still available in "<b>New data</b>",how come data is not yet activated.
    bcoz in settings all are set to "automatically",so there is no question of manual activation?
    One more question is in Settings Iam finding one column like "<b>Unique Data Records</b>",whats's this,if v check this what happens ifnot what happens?
    regrads
    balaji

Maybe you are looking for

  • External Hard Drive Issues

    I'm a new MacBookPro owner, and I also recently purchased a SANSUNG HD501LJ Media SATA II 500 External Hard Drive. I've had problems with my computer locking up either when I first install the hard drive into the expresscard slot or when it's been co

  • CS6 crashes on exporting to PDF

    When I try to export a document as a PDF, CS6 keeps crashing. I've got a few PDFs in the document and have tried deleting them completely to see if they were the reason for the crashing. However it still keeps crashing. This is really frustrating as

  • Websites loads pixelated images in firefox after update to version 23

    After firefox updated to version 23 blogs that have image is loaded pixelated. I'm on windows 7. I tried every solutin I seen: open firefox in safemode ; deselect the "Use hardware acceleration when available" box ; also the page basic style didn't h

  • How backup/save software installed on T400 before doing clean install of Windows 7?

    Hi I have a Thinkpad T400  2764-CTO Running Vista Business 32-bit  and want to do a clean install to Windows 7 Pro. Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that

  • Drivers error (fastboot and flashmode) on Windows 8.1

    Hi, After update Windows 8 to Windows 8.1, fastboot and flashmode (so Sony Mobile Update also) doesn't works.The phone (any Xperia. I tested Xperia J and Xperia LWW) is detecting as 'not recognized USB device'. I'm sure that this is not my computer/p