Bex Broadcater is not working
Hi,
In my query designer, when I click Publish-> Bex Broadcaster it is navigating me to empty Internet explorer screen.
Can you please tell me how to solve this issue.
Thanks,
Harish
Hi,
Go through SAP Note 972514 - Empty BEx Web Analyzer instead of BEx Broadcaster.
Symptom
You start the BEx Broadcaster from a BEx Web Application. The system displays the empty BEx Web Analyzer instead of the BEx Broacaster.
Solution
You must configure the message server of the ABAP Web Application Server in such a way that it sends HTTP return code 307 (temporary redirect - for HTTP 1.1) instead of HTTP return codes 301 (moved permanently; use new URL) or 302 (moved temporarily; use same URL).
Most Web browsers (such as MS Internet Explorer and Mozilla Firefox) interpret this in such a way that they send the POST parameters to the server that is the target of the HTTP redirect. Note that the use of HTTP 1.1 for the Web browser is mandatory because return code 307 is available only as of version HTTP 1.1.
Set the ms/redirect_version parameter to value 1 and restart your ABAP Web Application Server.
This parameter should be displayed after you restart.
Transaction SMMS
-> Goto -> Parameters -> Display (in all servers).
See Note 857596 for more details. You can use transaction RZ10 for the parameter change.
Navesh
Similar Messages
-
Bex Query is not working in portal
Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENUHi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank -
MS Excel in the Bex Analyzer is not working
HI
If I start Bex Analyzer (BI7.0) , MS Excel is not working.
So There is no userid pop screen on the MS Excel Screen.
Whats' wrong ?Hi,
Which version of excel are you using?
Try with the SAP GUI 7.10 with the latest SAP BI Addon Component. You can download it from SAP Service Market place.
Downloads - Support Packages and Patches - Entry by Application Group - SAP Frontend Components - BI ADDON FOR SAP GUI - BI 7.0 ADDON FOR SAP GUI 7.10 .
The latest patch level for SAP BI Addon Component is 1300 (bi710sp13_1300-10004472.exe).
Hope this helps.
Regards,
Hari. -
BEx formula change not working in existing Analysis for Olap/Analysis for Excel reports
Hello all,
I posted this in Analysis for OLAP, but there has been no response so I'm hoping perhaps you BEx experts can help me.
I had to modify a formula in a Bex query to have it calculate the results of the formula by summation.
I checked the query using BEx Analyzer and it summed correctly. If I create a new analysis for olap report, it sums correctly.
If I modify an existing report, it does not pick up the change. Existing Analysis for Excel reports also do not pick up the new summary calculation.
Using the CMC, I edited the connection and reselected the Bex query, but that did not work either.
Here it is working in the query:
Line Discount is a formula with logic checking to see if "product list price total amount" is 0, set the line discount to 0; otherwise calculate it as "product list price total amount" - Net Sale. So the total needs to sum of the line discounts (0+2820+2820 = 5640) and not be the Overall result "product list price total amount" - Overall Result "net sale" (13960-96720= -82760).
Here it is in an existing Webi report - working:
Here is what is happening in an existing Analysis for OLAP report - not working:
I also tried to unselect Line Discount as a key figure from the existing report and reselect it, but that did not work.
I'd like to find a solution so that all the reports that use this query won't have to be rewritten.
I'm on BW 7.0 EP 1 SP 10 and BI 4.0 SP7 Patch 5.
Thank you for your help,
SusanHi,
Apply Exception aggregation on line discount formula--Exception aggregation as Total---Reference characteristic as Promega product.
Make sure to refresh the webi report once after the changes has been done.
If this does not work then you can apply summation calculation for that column at webi level as well.
Regards,
AL -
Hi experts,
i had a BEx Query in 3.5 that was displayed in BEx WAD 3.5
i have saved the Query in BEx 7 and created a WAD 7
in the query the were some exceptions on a key figure.
in WAD 3.5 on the query or in RSRT the exception works and displayed.
if i run the query (Query Designer 7) or the WAD 7 on the query,
the exceptions does not works and not displayed.
i am working in BW 7.01, SP 10.
and Portal 7.01 SP 7.
Thanks in advanced,
Or.Hi,
You need to create the exception in portal side.
Status Exception:
This exception affects result cells. This setting is especially suitable
for absolute keyfigures. If you set a dynamic filter for any
characteristic used in the query, the exception will not be applied to
the result cells as the result changes and invalidates the exception
threshold defined. You can always override this behaviour for a specific
characteristic by defining a characteristic context. You can do this in
the query designer itself or in the exception wizard during runtime
(step 5 in the wizard or tab 'Cell Restrictions' in the Query Designer).
Trend Exception:
This exception affects all cells. This setting is especially suitable
for relative keyfigures. If you now set a dynamic filter for any default
characteristic, the exception will be applied to the result cells.
However, if you have defined a characteristic context (Cell
Restrictions) with 'Totals Only' for a specific charecteristic and you
now set a dynamic filter for it, the exception will not be applied to
the result cells.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/21b4cd14cd06f4e10000000a422035/frameset.htm
Thanks,
Venkat -
Button in BEX analyzer does not work
Hello Gurus,
I can open analyzer, but all the button for analyzer (such as open) do not work. will you please what 's wrong with it?
Many thanks,
Frank ZhangHi
Try this sapnote_0001121263
Edited by: Thorsten Kuhn on Dec 12, 2008 2:09 PM -
SAP BeX WAD URL not working on Black Berry Emulator
Hi All,
I web report which is running successfully on Windows XP browsers. But when I am going to use same url for Black Berry emulator its not working for that. Can Some one please Help me on this?
I tried same url on Windows CE emulator also but was getting same error.
Regards,
Abhishek JainThe error that I was getting for above is "Something Didn't work quite right and we are unable to show the page you requested right now. Rest assured, Google Engineers are already springing into action to solve the problem."
Edited by: Abhi4SAP on Jan 12, 2010 8:06 AM -
BEX Broadcaster does not work / open
Hello,
I'm trying to use the Broadcaster in BI 7 but when I try to open it (from the BEX Analyzer or the BEX Query Designer), it doesn't do anything, it even doesn't give an error.
Does anybody know what could be wrong ?
I've entered the standard web template for broadcasting in customizing so that's not the problem.
We don't have the Portal installed but I didn't think you need the portal in order to be able to use the broadcaster, am I right ?
Thanks in advance,Yes, you dont need portal for broadcasting...
First test web reports through t-code RSRT, if web reports are working then check broadcasting templates through t-code RSCUSTV21& RSCUSTV27.
Regards,
shalin -
Optional BEx query variables not working in WebI
Hi,
I have an Webi report based on Bex Query using BICS connection.
One characteristic is restricted with two variables. First an authorization variable and additional with an input ready variable.
This input ready variable is optional. When it comes up in webi and you choose a value it doesn't filter on it.
We are on BO 4.1. SP3 and BW 7.31.
With SAP_ALL the optional prompt is working, but for a user with limited access, the optional variable doesn't work.
I have already made a RSRT trace with a test user. But I'm not sure what's the problem.
Trace returned:
S_RS_AUTH RC=4 --> BIAUTH=0BI_ALL; type=RF;name=BICS_PROV_OPEN;
But I don't want to give the user 0BI_ALL, otherwise my analysis authorizations for this info object would be obsolete.
Any ideas?
Thx and Regards,
KatharinaHi Neetika,
thank you for your advice!
I tried the filter without authorziation variable and it was working.
I in addition I tried another option: I defined auth variable as input ready and deleted filter variable and that would work working.
With this setting I recognized that for the authorization variable all allowed values are set as default values! If you execute query with SAP_ALL no default is set, but with limited access the allowed values are set as default.
This may be the problem here. I don't know if this behaviour is by design or if there is a problem with rights?
But now I know where the problem comes from.
Regards,
Katharina -
Custom Filter in Universe on top of BEX Query is not working in BO Explorer?
Hi,
I have created Condition(Filter) for an Dimension Object "Submitted by Group Hierarchy" in Universe designer tool on top of SAP BEx Query and then exported the universe to Repository.
<FILTER KEY="@Select(Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy).[TECH_NAME]"><CONDITION OPERATORCONDITION="InList"><CONSTANT CAPTION="@Prompt('Submitted By Group ','A',' Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy',multi,primary_key,,{‘Direct Sales’)"/></CONDITION></FILTER>
To test my custom filter , I have created WEBI report and its allowing input entry in my custom filter and output is also coming .
where as in Explorer, i am not able to enter input values for my custom filter as below.
Can anyone suggest me how to create custom filter in universe and use it in explorer.
Thanks in advance.
Regards,
Ramana.Hi Ramana,
Please try using 'mono' in place of multi in @prompt syntax and then test.
Regards,
Pranay Sharma -
Bex Query variants not working
Hello Experts,
I have a unique problem with one of my queries, the query variants which are created before Nov 1 are not fetching any vaules instead it gives a message MAKE ENTRY IN ALL THE FIELDS......
the variants which are created in Nov are working fine.....we have not done any upgrade....
does anyone faced this kind of problem? what needs to done to get back the variant values in the selection screen.
Any help is highly appreciated.
RegardsWas there a change to an InfoObject that is in the InfoProvider that is also one of the query input options?
e.g. IO ZHARA used to be defeined as a Char with a length of 4, but was changed after Nov 1 to Char, length of 8.
If you change an IO like this that is in the variant, that will render the variant unusable.
There is a program that checks for variants that have been broken like this, and another that you enter the query's technical name and it repairs the variant.
Try a search on SDN for something like "query variant program". I'll post the program names after I get back in the office tomorrow. -
Hi,
I have a BEX query with filters on Special Procurement Key 10,20,Y7,ZV,XY and #.
When we run this query, result is displayed for above keys along with Z7 which is not part of the filter.
Any idea why Z7 is shown in the result even though it is not included in the filter.
Please help.
Thanks,
Shridevi BHi Shridevi,
Can you tell me if its 3x or 7x query, If its 7x then you will have to apply the filter/restriction only in the tab "Filters" and not in the "Default Values"
Also do you know if there is any authorization variable which is overriding the filter selections? You can check for this when you apply trace, check with your Security folks who could help
Can you run the report in RSRT with debug mode by disabling the cache and BIA off to see if you get same result set?
Last, is this Report based on Cube/DSO, If its based on Cube then run the report with the same set of selections to display the output (Use DB aggregation) to ensure the BIA/DB indexes are not corrupt
Thanks
Abhishek Shanbhogue -
Bex Saved views not working after changes in query
Hi Experts,
we have an issue in saved views(Bex reports.
Users execute the Bex reports and do drill downs according to their requirement and save it in their local machine.Whenever they want to do reporting they just open the saved report and do refresh which fetch the latest data from the backed system.
But as a developer we do the changes in queries(like adding extra rows or any other changes in queries without changing the row and column structure) and transport to production..
When user opens the old saved and do refresh(this will connect to SAP), it doesn't show the latest changes(extra row added in the query)
So user complains every time they have to open a fresh report and do drill downs according to the requirement.
We informed that its unavoidable, But Any idea to avoid this issue? please suggest?
regards
Pradeep
Edited by: pradeep v on Nov 7, 2011 2:15 PMHi
Its not possible user has to execute the report freshly and have to save the views.
But there is an option if you save views in server i.e. what ever required formats that to be saved in the server whenever new changes comes then as a developer you just open that view and refresh and save it again.
Regards
Jagadeesh -
RRI jump to BEx from EP is not working
Friends,
We have configured BI admin cockpit. When I click on any iView and then Go To->,
all the jumps to Web GUI (tcodes) are wroking fine. But jump to BEx web application is not working.
Go To-> Infocube Status : Analysis, * Analysis.. are not working. It shows "This page can not be displayed".
But those templates are available in the system.
If I try the same web applications from RSRT tcode, the RRI is working fine.
Please help..
JoeHi Joe,
Below link will helps you to solve the issue...
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
If not please take help from your admin guys(Basis people)
Regards
Sudheer -
Filters are not working in Bex report
Hi All,
I got a strange issue in my project.
There is a report in Bex analyzer, after got the report result user trying to put filter on one navigational attribute, unfortunaltely filter is not working.
For example:
User ran the report and got the output, now user tried to filter on country with the value"India", but the report showing all the countries in the result.
What could be the problem, I have checked all the settings.
I did not get any clue. Could you please throw some light and help me.
Thanks & Regards,
VenkatHi Rama,
I mean, it is working fine in listcube and variable screen, but it is not working while filtering data in report output.
Please advice me how to solve this.
Thanks & Regards,
Venkat
Maybe you are looking for
-
LIRC and PV-M4500 (TV Excel / PlayTV PixelView Pro TV Card)
Hi all, I've installed a BT878 TV card, but I've had no luck getting its remote to work. I've found a handful of accounts reporting success with linux and this card, so it must be possible. I'd appreciate some help though, as I'm out of ideas. Hopefu
-
I keep getting a box saying that firefox is already running and I have to restart my computer to access it
-
Initially only the startup was slow and following pages brisk. Now all pages appear only after minutes. I tried removing and reinstalling. Is there any fix? Sony RB60G Windows XP SP2
-
So, I bought the iPod shuffle and when I plug it into my mac, the option of syncing doesn't appear. What do I do?
-
Purchased music through iphone, download from iphone NOT pc app doesnt play
I have purchased an album and i downloaded through the ipone itself. While i can see the songs list some of the songs doesn't play. Specifically the iphone "looks" like playing them yet no sound comes out. The download shows as successfull The music