BEx Query Designer - Url openining problem

Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name      UT Code      Short Name      Description      Activation Date      Configured
SAP NetWeaver 2004s      BI      BI Java      BI Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      AS      AS Java      Application Server Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EPC      EP Core      Enterprise Portal Core Components      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EP      EP      Enterprise Portal      Mon Aug 11 00:00:00 IST 2008      NO
SAP NetWeaver 2004s      AAS      AS ABAP      Application Server ABAP      Mon Aug 11 00:00:00 IST 2008      YES
Please correct me where to configure default host name
Regards,
Ravi ghangurde

Dear all.
Below are the details probelm .
i want to open the portal nwa using url  "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde

Similar Messages

  • Problem with Queries Structures in Bex Query Designer and Universe Designer

    Hi everyone,
    I have a problem when i try to do a Universe from a Bex Query Designer.
    When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
    EJ:
    1) Bex Query Designer
    Colunms
    (Structure) ZSRT_123
                          - (Characteristic Restrictions) Reg Guayana
    >          (InfoObject)     0Product = 'XXX'
    >          (InfoObject)     0Country = 'YYY'
         - (Characteristic Restrictions) Reg Caracas
    >          (InfoObject)     0Product = 'AAA'
    >          (InfoObject)     0Country = 'BBB'
    Rows
    (Structure) ZSRT_456
                   (Key Figure)     Net Sales
    2) Universe designer
    (Class) ZSRT_456
    >(Measure)      Net Sale
    (Class)     ZSRT_123
    >(Dimension)      ZSRT_123
    The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
    Any information would be much appreciated. Thank you.

    Hi,
    I assume that you are using BOE XI 3.1 SP2.
    We have added an option in SP2 to generate or not the L00 level.
    Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
    I recommend to always generate L00 in order to have your structure generated correctly.
    This issue will be fixed in SP3.
    Regards,
    Didier

  • BEx Query Designer Opening Problem

    Hi Guys,
    I am working on BI 7.0. My system OS is Windows XP. When i try to open Query Designer it showing an as below.
    Component 'BEx Query Designer': available version 154, version 229 required.
    Before you can continue you have to run the front-end setup.
    please let me know to resolve this issue.
    Thanks
    Murali

    Hi Murali,
    To make sure it works, you should make sure that:
    When you installed the SAP GUI, you have checked the BI option (in addition to the BW option)
    Install the latest front end patch (BI patch 7) from SAP Marketplace
    I highly recommand to also install the BI SP07 patch for the server - it adds lots of stability for the front end.
    It works pretty well for us, I am sure you will also eventually make it work
    hope this solves ur problem....
    Regards,
    Bala...

  • Problem Bex Query Designer

    Hello,
    Our BI guys are facing a problem with the too - Bex Query Designer.
    They want us to update the version of the Query Designer.
    Can you please guide me as how do I obtain the latest version of Bex Query Designer.
    My current version is - release 2004s SUpport pack - 0, revision 418
    Thanks.

    have a look at this
    SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
    Regards,
    Ravi

  • BEX - Query Designer - Query Execution - IE "The page cannot be displayed'

    Hi ALL,
    Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
    However, when IE pops up to show the result, it says 'The page cannot be displayed'.
    It seems the PORT Number is wrong.
    When I execute the RSPLAN the port number is 52300 (23 ASCS)  (and it works!!).
    For this web query the port in URL is 55300 (53 SCS).
    Could you help to configure the right port?
    Something needs to be done on Basis side configurations?
    Thank you,
    Nivia

    Hi,
    This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
    But I still have problem:
    The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
    Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
    Connect_PM  TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
    ERROR       partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
    I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
    The important detail is that The PORTAL works if it doesn't come from BEx.
    COULD SOMEONE HELP ME?
    Tks,
    Nivia

  • Settings for SAP Portal start page from BEx Query Designer

    Hi!
    In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
    When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
    I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
    Question:
    What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
    Thank you very much!
    regards
    Jürgen

    Hi Anton?
    Many thanks for your reply.
    But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
    Do you speak Russian? Me too
    Can you also help me with the following problem?
    Hi!
    I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
    Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
    My problems are:
    when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
    - the status is getting u201Cyellowu201D (194 from 0 records)
    - at the next day the status is getting u201Credu201D and I received the following error:
    Errors while sending packages from OLTP to BI
    Diagnosis
    No IDocs could be sent to BI using RFC.
    System Response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
    Further analysis:
    Check the TRFC log.
    You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Error handling:
    If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
    Comment:
    I did not find any entries on "Environment -> Transact. RFC -> In source system"
    The Source system connection EC6CLNT100 is OK
    Can some one help me to solve this problem?
    Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

  • Drilldown in BeX Query Designer

    Hello,
    I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
    Warm Regards,
    Debayan

    Hi Debayan,
    first of all, what is your requirement to create a drill down?
    A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
    1. Master data-Navigational Attributes
    2. Master data- Hierarchies
    3. Free characteristics
    As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
    Please share your exact requirement.
    Hope this helps.
    -Swati.

  • Division in bex query designer

    Hi experts,
    I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
    The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
    The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
    I have tried the following in Bex query designer
    -25124 %A -91248 = -0,02753%
    (-25124/-91248)*100 = 0,02753
    What might be the problem here?

    Thanks again for your answer,
    I will try to explain my report (requirement from the business user)
    Actual (KF)----
    Budget (KF)       
    Sales-- -91248--
    -77153         
    FSP-- -25124--
    -18918
    Margin  % -
    (FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
    Dim
    Dim
    Result
    The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

  • Where to write IF THEN ELASE statements in BEX Query Designer

    Hi All,
    I need to write a formula in query designer...
    saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
    So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
    where can i write this logic to perform calculation ...
    Thanks in advance..
    ravi.p

    hi chetan,
    No its not work.. why because i  need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'.  this is  attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
    I can change these values in update rules by writting  Routine.. But I need to convert it in KGS at BEX Query Designer Level..
    I need calculate like this
    quantity sold * Gross Weight. 
    here Gross Weight is the formula variable which replacing the values of gross weight...
    i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
    is there any solution to solve this Problem...

  • Results based on From and To value in Bex query designer.

    Dear all,
    We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
    I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
    Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
    I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
    To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
    How to get my requirement achieved in the Bex query designer.
    Experts suggestion with steps will be very useful to solve my problem.
    Regards,
    M.M
    Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

    Hi Magesh,
    I think you could try one more way.
    Create a formula inserting your two formula variables for limits .(FV -  are ready for input ) .
    The formula would return the result as 1 or 0 because it would have boolean condition in it.
    You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
    You formula A would look like
    ( KF > FV1) AND (KF < FV2) * 1.
    And in the condition put A EQ 1.
    You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
    Regards,
    Sunmit.

  • New ratio doesn't appear in Bex Query designer

    Hello Experts,
    I added 2 ratios to my infocube. It activated without any problem. I then added these 2 ratios to my multiprovider and activated it after affecting them to the previous infocube.
    Then I connected to the Bex query designer and loaded a report in order to add these ratios, but there are not available for selection in the Ratio menu of the multiprovider.
    Has anyone faced this problem?
    Thanks

    Try reactivating the Multiprovider again and see if that works !
    I had this issue earlier, where I couldn't see two of the newly added characteristics in the multiprovider. But simply reactivating the multiprovider solved my issue.
    - Danny

  • In Bex Query designer - Flat is not supported

    Hi all,
    In Bex query designer,
    While execution of the query, the following error is coming .
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    Flat mode is not supported!
    java.lang.UnsupportedOperationException: Flat mode is not supported!
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
    Details: Full Exception Chain
    Most important error.
    regards
    Selvan

    Hello,
    I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
    Open, close, reload of the query does not help.
    Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
    Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
    Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
    I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
    The "flat-mode" seems to be the  "BEx table mode".
    SAP hints do not seem to fit here:
    - 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
    - 874825 SAPBWNews for BW 3.x Front-End Support Package 19
    - 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
    - 905229 update to SAPTableTree
    - 909824 Termination in flat mode when an object is deleted (old?)
    - 909827 Incorrect InfoProvider-dependent characteristic values
    - 910602 Condition includes too many characteristics (usage of deleted elements)
    - 915215 Termination when a query definition is changed (old? visibility of elements?)
    - 968273 Cache with flat files: Exception is not caught (does not apply to given error)
    Any new solutions?
    Best regards
    Thomas

  • Error while openening InfoProvider in Bex Query Designer

    Hi all,
    i am getting an error while opening the InfoProvider for a new Query in the Bex Query Designer.
    Error Group
    RFC_ERROR_SYSTEM_FAILURE
    Message
    Exception CX_RSR_MESSAGE in program SAPLRRMS
    RRMS_X_MESSAGE
    Main Program: SAPMSSY1
    Include Program: LRRMSU13
    What could be the problem?
    Thanks in advance
    Andreas

    Hello Andreas,
    seems as if  JCo Connections on your system have not been set up correctly.
    Please have a look here:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
    Regards,
    Daneil

  • Bex Query designer withour Enterprise Portal?

    Dear BW experts,
    After launching the Bex Query designer with BI7 system. After designing query, If I click on execute (Ctrl+R). It is launching internet explorer with error "Invalid Syntax error - Page cannot be displayed"
    It is launching the following URL
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCCQ20071048070001&VARIABLE_SCREEN=X&DUMMY=1
    I think it is looking for Enteprise Portal server. I dont have an EP server.
    What is the alternate way to execute this?
    Thanks in Advance...

    Hello to all of you,
    just to make sure that I do not missunderstand:
    As far as I know in BW3.5 (without EP installed) you were able to execute a query directly out of the query designer and it was shown as a web-query.
    Now I tried to do the same with a BI7-System the first time and I get the same symptom as Abdullah. We also do not have an EP installed on that system.
    As solution, you all describe that I have to open the query in analyzer to see it in excel - OK - BUT if I do not want to see it in excel but as a webquery (like in my good old BW3.5) instead ? Isn't that possible anymore ???
    Uwe

  • Giving Error while opening BEx Query Designer.

    Hi all,
                   A user is trying to open BEx Query Designer 7.0 and she is getting this error
    " SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
    If you were middle of something, the information you are working on might be lost. "
    She is not having issues while opening BEx Analyzer. She is having Office 2010. This doesn't seem to be compatibility issue with the Office. This BEx was not installed on her machine 2 weeks back and it was working fine until now. 
    As a first re-solution i told her to get it re-installed but still she is getting the same issue.
    Thanx.

    Hello,
    There is no relation between Office VS Query Designer. Only with BEx Analyzer and MS Excel.
    My suggestion is.
    If you don't have version 7.20 of SAPGUI and Business Explorer, please download the installer.
    After that, download the latest patch available and install:
    http://service.sap.com/swdc
    > Support Packages and Patches
    > Browse our Download Catalog
      > SAP Frontend Components
    > SAP GUI FOR WINDOWS
    > SAP GUI FOR WINDOWS 7.20 CORE
    > Win32
    _ > * gui720_5-10007878.exe
       |  > BI ADDON FOR SAP GUI
       |  > BI 7.0 ADDON FOR SAP GUI 7.20
       |_ > * bi720sp03p_301-20006596.exe
       |
       |  > BI ADDON FOR SAP GUI
       |  > BW 3.5 ADDON FOR SAP GUI 7.20
       |  > Win32
       |_ > bw350gui720_5-20006857.exe
    If persist, let me know.
    Cheers
    Edward John

Maybe you are looking for

  • Cannot open the webi reports

    hi guys, i have a problem opening a webi report. Actually, CMS and Bo are installed in different server. The reports which are connected to cms are not able to load where as the report connected to standalone are loading properly. I'm not getting any

  • Rank Question

    Hello, Why does this SQL not work in a PL/SQL function in my report? rank() over (ORDER BY column_name DESC) AS column_name I am wanting a report that looks something like this... Name     01/2002     Rank     02/2002     Rank     03/2002     Rank   

  • App for taking College notes?

    What is the best and most perferred app to use for taking college notes? Free/$$

  • JClient Dynamic JDBC Creadentials

    Hi! I need to implement solution described in article "How To Support Dynamic JDBC Credentials" in JClient application. As I understand, the only thing I need is to create my own class MyEnvInfoProvider and use it in JClient code. When I run applicat

  • Wifi & Impatient Dad !!!

    My dads got a 20" CoreDuo Imac, which connects through WiFi to a TimeCapsule. I've noticed since upgrading to Leopard, that it takes ages for the Airport to connect on boot, which means that if you don't wait and load Safari to quickly you get the er