Bex query is getting hanged, when trying to drill down only for one hierarchy node.

Hi All,
We have a bex query, in which we have multiple nodes. And we are able to expand almost all nodes except one hierarchy node called "BD1".
when we trying expand the BD1 node, the report is executing on and on and getting hanged up.
In RSRT the read mode is "H"
The report is based on a multiprovider and it has 7 cubes of which 6 of them have aggregates.
The characteristic for which we have issue is also having BWA.
So, I am not sure why the issue is with only 1 node in the entire report. Can someone let me know the possible reasons and solutions.

Hi Shilpa,
The only way to show long text is to maintain only long text for the info object. Otherwise system always defaults to short text.
Jaya.

Similar Messages

Error when trying to drill down by region in BW report.

Hi,
I am getting following error when trying to drill-down according to region in BI report.
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRK0 and from LIFT_DEL_H-02
can anybody please tell me how to solve this error.
Thanks in advance.
Vaibhav

Hi,
With the help of ABAPer, you can debug the short dump, if its a dump? Check whether this Infoobject is Authorization relevant?
Regards,
Suman

Integration Directory is getting hanged when trying to do some changes

Hello All,
Ours is PRD XI 3.0 env...and when we try to do any changes(editing , activating , rejecting the changes) it gets hangs up with out throwing any error.
At the same time other java tools(IR,RWB,SLD) are properly accessible .
Some points to be taken into notice:
1>Even we tried to do a CACHE refresh SXI_CACHE , which is success with out any problems.
2>After entering into ID , when trying to do "clear SLD cache " also it gets hangup.
Can any one help us to fix this issue.
Best Regards
Rakesh

try the following;
1. close IR/ID.
2. open java web start
3. Preferences -> advanced -> clear folder
then try to open IR and ID.
this should do the trick
else;
XI start page -> Administration -> Java Web Start Administration -> Re-initialization

Get error when trying to set up printing for new laptop

I have an HP laptop that is currently using windows XP and I was able to get that computer to connect wirelessly to the printer that is physically connected
to that desktop (HP deskjet 5550printer) computer. Now I recently purchased two Toshiba laptops that are running with Vista on them and cannot get them to print when I'm prompted to print a test page. Is it possible that the vista driver is not compatible with the xp driver that is on the DESKTOP computer?
I do get errors that say the wrong driver is installed.
Thanks for any help that any one has.

Hi,
Yes XP drivers are not compatible with Vista you need to install software for both the Computers.
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Error WHen rying to Drill down in the Report

Hi ,
I am getting the below error when trying to Drill down on a characterstic in the Report.
"500 Internal Server Error"
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RS_EXCEPTION (000): ORA-00904: "P0000"."CATTYPE_OT": invalid identifier
MSGV1: ORA-00904: "P0000"."CATTYPE_OT": invalid
MSGV2: identifier

Good day,
Please check if Note 1327130 helps ...
Regards,
Karen

Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup

Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup. I get the rotating beach ball cursor for hours but not get the confirmation dialog known from 3.4.2 aksing whether I really want to back up.
On old Mac Mini with OS X 10.6.8 and Aperture 3.4.2 there was no such issue.

Creating a new vault and populating it always works but then turning around and updating that vault hangs? The drive is formatted OS X Extended, correct?
That is strange. Before abandoning vaults, they should and do work in 3.5.1, I'd try this
Run a library repair on the library. I always do this now as it seems to cut down and hangs when updating a vault.
Before starting the vault update open the Aperture activity window Aperture->Window->Show Activity.
Now do the update. I can't give you anything specific to look for, just try to get an idea of where the hang is happening (if it happens after the repair).
As for rsync, it should work OK but keep in mind as a lot of the data now in 3.5 is in database files any change to Aperture will result in reync seeing a lot of files has having been changed so I'm not sure now much of a savings that will be over just copying the library. To be honest I've never tried rsync on an Aperture library so this may not be an issue but something to keep in mind. BTW do you have much rsync experience? It can be a bit of a bear to setup if you're not familiar with it.
Another option is to look at one of the cloning programs Carbon Copy Cloner or SuperDuper. They have the ability to make clones and then update only the changes since the last clone operation. In reality, I believe one or both actually use rsyn as the backend but give you a much nicer way to set it up and schedule it.

My G3 is Hanging when trying to load Tiger

My G3 is hanging when trying to load up tiger. It gets all the way up the progress bar and doesn't go any further? Any suggestions? Can I just erase my hard drive and start over. It's a computer that I'm trying to upgrade for my kids so there is really nothing important on the hard drive at this point. I can't even get to disk utility to do this.

Does your computer meet the minimum system requirements for Tiger? [Mac OS X 10.4 Tiger system requirements|http://docs.info.apple.com/article.html?artnum=301341] Note, these really are minimum and Tiger will run a lot better with more, especially RAM. Tiger on a 300MHz will probably be quite slow.
Some B&W G3s do not respond well to larger drives and the best terms is "flaky". These are the Rev. 1 G3s. You can post in the G3 forum for more information about this. See Grant's comments in [this discussion|http://discussions.apple.com/thread.jspa?messageID=7203272&#7203272]
The firmware should have been updated on your computer before any OSX install but I'd make sure just in case [Mac OS X: Available firmware updates for upgrading from OS9 to OSX|http://docs.info.apple.com/article.html?artnum=86117]

TS1398 my network but just hangs when trying to connect? I've have reset the settings and all sorts? My iPhone can connect fine? Any advise would be great!

My iPad can see my network but just hangs when trying to connect? I've reset the settings and all sorts? My iPhone can connect fine? Any advise would be great!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao.

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

Acrobat X Pro v 10.1.10 (Mac OS 10.9.3) hangs when trying to save PDF files

Acrobat X Pro v 10.1.10 (Mac OS 10.9.3) hangs when trying to save some PDF files, after opening or after commenting. Applies for any of the Save options. "Watch" then "spinning beach ball" appear and application is indicated as "not responding." Mac OS Preview has no problem with the same files. Files can be displayed with Acrobat, just not saved. I would prefer to use Acrobat's commenting tools to mark up the document.

"Mac Office 2008"? You must mean Microsoft Office 2008. Try posting in the Microsoft forums here:
http://www.officeformac.com/productforums/

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension>

CMS gets hang when configure TACACS

Hi
I have stack of 2950 switches. I have configure tacacs for login security purpose. but i am facing problem when i open CMS web interface. I am succussfully get authenticated. but its get hang when Discovering network information dialog box comes. If you close that session and reopen again then CMS working fine. Problem is that when I configure Network Access restriction group device for specific user. Then it halt at Discovering Network information. I am using Cisco ACS 3.0. Following my switch config.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated.
The only problem is CMS application getting hang with tacacs configuration . My IOS ver is 12.1(14)EA1A. Please help its very urgent.

I could not find any bugs related to the issue you are describing. There was one problem where the username/password prompt was appearing again and again which had to do with misconfigurations. Do let me know if you find a solution.

Getting an error when trying to shut down R12 application.

when trying to shut down R12 application getting the below mentioned error.
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
As per previous thread checked the database and its listener is up and running. Also , Application listener is up and running.
Kindly revert at the earliest.
Regards,
Fahim.

Hi,
Database and listener are up and running...
Exact error message : Invalid Application Username, Password Or Database "Username:APPLSYSPUB"
error in the log file :
Errors in file /t06/app/oratest/diag/rdbms/test/TEST/trace/TEST_arc1_18889.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 75161927680 bytes is 99.67% used, and has 251000320 remaining bytes available.
You have following choices to free up space from recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Regards,
Fahim.

Bex query is getting hanged, when trying to drill down only for one hierarchy node.

Similar Messages

Maybe you are looking for