Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details -  http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Similar Messages

  • Optional BEx query variables not working in WebI

    Hi,
    I have an Webi report based on Bex Query using BICS connection.
    One characteristic is restricted with two variables. First an authorization variable and additional with an input ready variable.
    This input ready variable is optional. When it comes up in webi and you choose a value it doesn't filter on it.
    We are on BO 4.1. SP3 and BW 7.31.
    With SAP_ALL the optional prompt is working, but for a user with limited access, the optional variable doesn't work.
    I have already made a RSRT trace with a test user. But I'm not sure what's the problem.
    Trace returned:
    S_RS_AUTH  RC=4 -->  BIAUTH=0BI_ALL; type=RF;name=BICS_PROV_OPEN;
    But I don't want to give the user 0BI_ALL, otherwise my analysis authorizations for this info object would be obsolete.
    Any ideas?
    Thx and Regards,
    Katharina

    Hi Neetika,
    thank you for your advice!
    I tried the filter without authorziation variable and it was working.
    I in addition I tried another option: I defined auth variable as input ready and deleted filter variable and that would work working.
    With this setting I recognized that for the authorization variable all allowed values are set as default values! If you execute query with SAP_ALL no default is set, but with limited access the allowed values are set as default.
    This may be the problem here. I don't know if this behaviour is by design or if there is a problem with rights?
    But now I know where the problem comes from.
    Regards,
    Katharina

  • Custom Filter in Universe on top of BEX Query is not working in BO Explorer?

    Hi,
    I have created Condition(Filter) for an Dimension Object "Submitted by Group Hierarchy" in Universe designer tool on top of SAP BEx Query and then exported the universe to Repository.
    <FILTER KEY="@Select(Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy).[TECH_NAME]"><CONDITION OPERATORCONDITION="InList"><CONSTANT CAPTION="@Prompt('Submitted By Group ','A',' Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy',multi,primary_key,,{‘Direct Sales’)"/></CONDITION></FILTER>
    To test my custom filter , I have created WEBI report and its allowing input entry in my custom filter and output is also coming .
    where as in Explorer, i am not able to enter input values for my custom filter as below.
    Can anyone suggest me how to create custom filter in universe and use it in explorer.
    Thanks in advance.
    Regards,
    Ramana.

    Hi Ramana,
    Please try using 'mono' in place of multi in @prompt syntax and then test.
    Regards,
    Pranay Sharma

  • Bex Query variants not working

    Hello Experts,
    I have a unique problem with one of my queries, the query variants which are created before Nov 1 are not fetching any vaules instead it gives a message MAKE ENTRY IN ALL THE FIELDS......
    the variants which are created in Nov are working fine.....we have not done any upgrade....
    does anyone faced this kind of problem? what needs to done to get back the variant values in the selection screen.
    Any help is highly appreciated.
    Regards

    Was there a change to an InfoObject that is in the InfoProvider that is also one of the query input options?
    e.g. IO ZHARA used to be defeined as a Char with a length of 4, but was changed after Nov 1 to Char, length of 8.
    If you change an IO like this that is in the variant, that will render the variant unusable.
    There is a program that checks for variants that have been broken like this, and another that you enter the query's technical name and it repairs the variant.
    Try a search on SDN for something like "query variant program".  I'll post the program names after I get back in the office tomorrow.

  • BW query not working in portal

    Hello Experts,
    We have this issue when we have a BW query which is running well in RSRT but the query is not working in Portal.
    The error message we have is
    User when running the report is getting the error message “Error in File SMT-0454 - Contribution Analysis (Cx) :   Error in formula  Running Total Condition Formula: 'HierarchyLevel (GroupingLevel ({YPAXXM01_YPAXXM01_QC001.[YGLSUBBRD                     GSK1CXBRNDCATH]-NodeId})) = 1' This field name is not known..”
    Explored the possibilties , Could this be issue with BW query.
    We have this query getting fed to BO's. Please advise.
    Thanks,
    Santhosh

    Hi Santhosh,
    Error... This field name is not known, check your formulas in query, there might be some changes happenened with the characteristics used in formula.
    Check the formula by going up to base level, you might removed some field ex: YGLSUBBRD from your query. Repair it appropriately.
    Hope helps - Kumar

  • Application not working on Portal

    Hi,
    I have a query regarding one of the application. The application is a transactional app like creating a new supplier/material.
    When i execute the application from backend ECC, it is running fine but the same application is not working on Portal.
    The application is working fine from NWBC as well. The problem is that the application navigation is not happening when i click on Create and throwing below errors. Please suggest at the earliest.
    com.sap.portal.appintegrator.sap.Generic::Generic/ConnectionLayer
    MandatoryParameters
    OptionalParameters
                         SAP_LocalSystem                     DE1CLNT110                     DE1CLNT130                     DF1CLNT100                     DG1CLNT100                     SAP-GRC                     SAP-GRC-AC                     SAP_BI                     SAP_ECC                     SAP_ERP_Common                     SAP_FMDM                     SAP_GATEWAY                     SAP_GRC                     WebEx              
    Authentication
    DebugMode
                         No                     Yes              
                         GET                     POST              
    Regards,
    Yuvraj

    Hi Yuvraj,
    Well, as it turns out.. we're at SP12 and this note does not apply for us. It's not really a solution for our system and we're still looking for the reason for this behavior of the portal.
    On the other hand, you've opened this thread and you are the only one who can award points and mark certain solution as correct
    Regards,
    Boris

  • SP 19 upgrade issue : Log off Button not working in Portal Masthead

    Hi All,
    We have recently performed an upgrade from EP 7.0 SP12 to EP 7.0 SP19 stack level.
    After the upgrade we are facing these 2 issues:
    1) Log off button is not working in Portal Masthead
    2) SSO to BW reports also not working.
    Any immediate pointers and help is highly appreciable.
    Regards,
    Shailesh

    Hi Tobias,
    Thanks for the reply.
    I have tried rebuilding and redloying the par file after removing the function "'releaseProducerSessions()' " which is not available in SP 19..but still the issue persists.
    Any other process to be followed?
    2) SSO is working for other stuff, and the issue is specifically for Bex iViews/Reports
    Regards,
    Shailesh

  • WEBGUI  is not working in portal

    Hi
    I had conected to production server and created Transactional Iview with SAPGUI for WINDOWS and running it successfully.
    My aim is to make use of SAPGUI for HTML in the place of SAPGUI for WINDOWS.
    So i had activated ITS services successfully and the URL is working fine.As i am using integrated ITS i checked with the fallowing URL.
    http://server:port/sap/bc/gui/sap/its/webgui
    It had shown the screen of SAP WEB Application Server with portal SID and asking for credentials. after proving the credentials its showing SAP screen successfully.
    Now i had changed SAPGUI for HTML in transactional IVew and getting the same screen succesfully. as it ask for SAP user Id pwd. i had entered the same credentials wat i had entred earlier during the test. Now its showing an error like
    <b>Client, name, or password is not correct; log on again .</b>
    what could be the problem ?why its not working in portal while working fine with URL ?
    Please guide me .

    Hi
    U Need to enable SAPGUi for html
    goto se80 give internet services (in the drop down box)
    Below drop down give SYSTEM publish these service by right clicking system publish--complete service.
    and also publish same way WEBGUI
    Check SAP Note 698329
    Hope this helps you.
    Regards
    Krishna.

  • IF_FPM_WORK_PROTECTION is not working in portal

    Dear Experts.
    IF_FPM_WORK_PROTECTION is not working in portal . Which i have re-implemented in my Z-Wdp Component and in IS_DIRTY( ) method, following is the code which i have written.
      ev_dirty = abap_true.
      DATA lo_api_component  TYPE REF TO if_wd_component.
      DATA lo_portal_manager TYPE REF TO if_wd_portal_integration.
      lo_api_component = wd_this->wd_get_api( ).
      lo_portal_manager = lo_api_component->get_portal_manager( ).
      CALL METHOD lo_portal_manager->set_work_protect_mode
        EXPORTING
          mode = if_wd_portal_integration=>co_wp_mode_application_only.
      lo_portal_manager->set_application_dirty_flag( dirty_flag = ev_dirty ).
    The scenario is : I have CANCEL button on my screen. And on click of that button,It is triggering go data loss popup.But on click of OK in that popup, It is giving the below message.
    When i click on OK button, Instead of closing the appl'n is it giving the above error.
    Thanks
    KH

    Hi KH,
    IF_FPM_WORK_PROTECTION is not working in portal .
    As per my knowledge, the method Is_Dirty( ) method just sets the EV_DIRTY flag and informs the portal about unsaved data on application.
    Please refer the below help link
    Work-Protect Mode - Floorplan Manager for Web Dynpro ABAP - SAP Library
    I don't think we need to do any thing else at WD side.
    Please consult portal team member to assist you in this case.
    Settings for WorkProtect Mode (SAP Library - iViews)
    Hope this helps you.
    Regards,
    Rama

  • Temporary Table In SAP Query - Does not Work?

    DECLARE @date DATE
    DECLARE @delrows INT
    DECLARE @delquan INT
    DECLARE @a INT
    DECLARE @recrows INT
    DECLARE @recquan INT
    SET @a=0
    IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
    CREATE TABLE ##tab
    [Date] date,
    [Delivery Rows] varchar(40),
    [Delivery Total Units] varchar(40),
    [Receipts Rows] varchar(40),
    [Receipts Total Units] varchar(40),
    WHILE @a!=7
         BEGIN
         SET @date=DATEADD(day,-@a, getdate())
         SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
         FROM ODLN
         INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
         WHERE ODLN.[CreateDate] = @date
         SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
         FROM OPCH
         INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
         WHERE OPCH.[DocDate]=@date
         SET @a=@a+1
              INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
    END
    SELECT * FROM ##tab
    {/code}
    Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
    1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
    2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
    Edited by: Chris Candido on Feb 2, 2011 8:38 PM

    Chris,
    There are several areas in your code which needed changes. 
    1. On the field name for your temp table you had spaces.
    2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
    [dbo].[ODLN]
    3. You really need not have ## in front of your temp table, it could just be #
    The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result.  I would suggest you put the whole code into a Stored Procedure and call the SP from SAP.  Corrected SQL below.  If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
    DECLARE @date DATE
    DECLARE @delrows INT
    DECLARE @delquan INT
    DECLARE @a INT
    DECLARE @recrows INT
    DECLARE @recquan INT
    SET @a=0
    IF object_id('tempdb..#tab') IS NOT NULL
    BEGIN
       DROP TABLE #tab
    END
    CREATE TABLE #tab
    [Date] date,
    DeliveryRows varchar(40),
    DeliveryTotalUnits varchar(40),
    ReceiptsRows varchar(40),
    ReceiptsTotalUnits varchar(40),
    WHILE @a!=7
    BEGIN
    SET @date=DATEADD(day,-@a, getdate())
    SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
    FROM [dbo].[ODLN]
    INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
    WHERE [dbo].[ODLN].CreateDate = @date
    SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
    FROM [dbo].[OPCH]
    INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
    WHERE [dbo].[OPCH].DocDate=@date
    SET @a=@a+1
    INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
    END
    SELECT * FROM #tab
    Suda Sampath

  • Query is not working correctly

    Hi all,
    Below query is not working correctly. Please let me know, if you find the mistake
    select
    a.name,
    b.VOD_NAME,
    count(xm.ATTRIB_03)
    from
    siebel.s_vod b
    left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
    left outer join vod d on c.VOD_ID=d.row_id
    left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
    left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
    where
    b.VOD_TYPE_CD='CLASS_DEF'
    and
    c.LAST_VERS = 0
    and
    b.vod_name='Componentes'
    group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5

    user9522927 wrote:
    Hi all,
    Below query is not working correctly. Please let me know, if you find the mistake
    select
    a.name,
    b.VOD_NAME,
    count(xm.ATTRIB_03)
    from
    siebel.s_vod b
    left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
    left outer join vod d on c.VOD_ID=d.row_id
    left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
    left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
    where
    b.VOD_TYPE_CD='CLASS_DEF'
    and
    c.LAST_VERS = 0
    and
    b.vod_name='Componentes'
    group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
    "Here's a picture of my car sitting in the driveway. Why won't it start?"

  • Select query is not working in BDC Program

    Hi,
    I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
    i am using two internal table : I_DATA and ITAB
    Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
    So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that  Material Number then  material no. exit in Mara Table.
    Note : at run time  I_DATA have 1 row but ITAB have 0 row ....
    DATA: BEGIN OF I_DATA OCCURS 0,
    MATNR TYPE MARA-MATNR,
    WERKS TYPE MARC-WERKS,
    BWTAR TYPE RMMG1-BWTAR,
    VERPR TYPE BMMH1-VERPR,
    BKLAS TYPE MBEW-BKLAS,
    STATUS TYPE C,
    END OF I_DATA.
    DATA : BEGIN OF ITAB OCCURS 0,
    MATNR LIKE MARA-MATNR,
    MTART LIKE MARA-MTART,
    END OF ITAB.
    Loop at I_DATA.
    select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
    endloop.
    Guide me..........

    If you use your
    Loop at I_DATA.
      select matnr mtart from mara into table itab
        where matnr = I_DATA-matnr.
    endloop.
    At end of loop, itab will only contain the result of the last select, so use a
    Loop at I_DATA.
      select matnr mtart from mara APPENDING table itab
        where matnr = I_DATA-matnr.
    endloop.
    better
    if I_DATA[] is not initial.
      select matnr mtart from mara into table itab
        FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
    endif.
    Some Remarks
    - If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
    - You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
    Regards,
    Raymond

  • Exit Plug not working in Portal

    Hi experts,
    I have a web dynpro application (WDP A) which fire an exit plug to another web dynpro application (WDP B). It works fine in normal web dynpro runtime. The architecture of the application is shown [here|http://img232.imageshack.us/img232/7172/exitplug.png].
    Now i have created an iView in the EP for WDP A. When the button which fires the exit plug is clicked, i get this error.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
    Seems exit plug is not working in portal run time. Any one has an idea on how to solve this?? Use portal navigation?? What is that?? any guideline and documentation on that??
    Thanks in advance.
    Best Regards,
    kityein
    Edited by: kityein lai on Aug 5, 2009 10:04 AM

    Hi,
    Now that your WD apps are running in a Portal they should be more "Portal aware".
    What I mean is that now they are part of a larger framework and you cannot just call the other WD app.
    To do this properly (as the error message says) you should use the portal navigation.
    Portal navigation consists of many variants: Normal, Dynamic, Quicklinks etc etc.
    I personally advice to use Quicklinks if you want to navigate between 2 applciations running in the portal but are not native-portal apps. Altough this might not fit your requrements in this scenario, I cannot say....
    In addtions here are some help resources:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/38/5dc53e5ae84d3be10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/97/b0ef8b24a64ae884f0ab246e54cae5/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/00c110606a5277e10000000a1553f7/frameset.htm
    Hope this helps you a bit...
    Benjamin Houttuin

  • Why select query is not working?

    CREATE OR REPLACE TYPE prod_type AS OBJECT (
    pid INT,
    pprice NUMBER,
    MEMBER PROCEDURE display(pid IN NUMBER));
    create table prod of prod_type (pid primary key);
    CREATE OR REPLACE TYPE deal_type UNDER prod_type (
    ctr NUMBER,
    OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
    insert into prod values(deal_type(101, 4, 1));
    insert into prod values(deal_type(102, 5, 0));
    ------below given select query is NOT WORKING ---------
    select ctr from prod p where p.pid=101;
    Thanks,
    -Nid

    ------below given select query is NOT WORKINGWondering how you inserted data ...
    SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
      2  pid INT,
      3  pprice NUMBER,
      4  MEMBER PROCEDURE display(pid IN NUMBER));
      5  /
    Type created.
    SQL>
    SQL> create table prod of prod_type (pid primary key);
    Table created.
    SQL>
    SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
      2  ctr NUMBER,
      3  OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
      4  );
      5  /
    Warning: Type created with compilation errors.
    SQL> sho err
    Errors for TYPE DEAL_TYPE:
    LINE/COL ERROR
    4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
             following:
             , not pragma <an identifier>
             <a double-quoted delimited-identifier> final instantiable
             current order overriding static member constructor map
    SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
      2  ctr NUMBER,
      3  OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
      4  /
    Warning: Type created with compilation errors.
    SQL> sho err
    Errors for TYPE DEAL_TYPE:
    LINE/COL ERROR
    1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
    SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
    Avoid deriving a subtype from this FINAL type.
    HTH

  • Excel 2010 MS Query is not working

    Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010.  I am running into problem with the MS Query.  Spreadsheets have MS Query linking to MS database.  However, when I open some of the spreadsheets, the MS Query
    is not working ie. the blue circle keeps turning and then not responding.  It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria.  I
    tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database.  Once I set up the criteria and click Return data, the Query gets stuck.
    Please help! Any comments/suggestions will be appreciated.
    Thanks

    Hi,
    There are many possible causes that can crash MSQuery in Excel 2010.
    First, please make sure we have installed the latest Office 2010 and Windows patches.
    Second, Please read the Blog, it explains one typical crash scenario.
    =====
    AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
    There are several possible resolution you can try to resolve the above crash:
    1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
    The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
    2. Repair all the keys into registry at the following place:
    [HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
    For example:
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
    "TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
    "TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
    http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
    =====
    Third, start the Excel 2010 with
    safe mode, it helps us confirm if some add-ins cause this issue.
    Hope it's helpful.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
    Office programs.

Maybe you are looking for

  • Any report to identify Time Constraint issues?

    Hello, Is there a report that I can run to get the employees and Infotype records with time constraint issues? So until last week, we had not turned on the PC-UI switch in T77S0 table. So the way it worked was, if in history there were 2 records with

  • Problem with Case statement

    I friends, I am using a case statement for a number field like this case when (customer_no is null or customer_no ='') then t.customer_no else gv.customer_no end as customer_no When i complie this i get an errror ORa-00932 inconsistent data types exp

  • Select issue

    Select issue

  • Trying to update Ipad first generation, how to I do this?

    I am trying to update my IPad 1st generation, which now has an operating system of 5.1.1 -- I can't seem to get the proper instruction from the store/apps only guides.  Nothing is working.  I want to be able to follow friends on Instagram.  Please gi

  • Can't find original files after uploading photos through iPhoto

    I'm a recent "convert," and yesterday I uploaded some pictures directly through iPhoto for the first time. Then I tried to log onto Facebook to create a photo album and couldn't find the original photos in my "Pictures" file or anywhere else. I found