BEx Query output in Enterprise Portal using "Information Broadcasting"

Dear Experts,
I am having BEx Query output in Enterprise Portal
EP 6.0 and BW 3.5 version
I am trying to send email attachments from
Portal Query directly
using "Information Broadcasting" tab button
==================================
Email gets triggered Okay,
but Portal URL link is not showing correctly
Here is an Online Link to the BI Document: http://mtv01spbw01.businesssap.com:8100/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001
<b>The URL above is coming wrongly,
I want it to point to
http://mtv01spbw01.businesstree.com:8000/sap/bw/BEx?CMD=LDOC&INFOCUBE=0CRM_OPPH&QUERY=0CRM_C04_TESTQ001</b>
Please help me to correct this error / wrong configuration
any help links would also be appreciated
Thanks,
Aby Jacob

Hi Jacob,
Here, p/s refer to this links.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm</a>
OSS Notes : 760775
Hopefully it can helps you a lot.
Many thanks.
Regards,
Niel.
(Many thanks for any points you choose to assign).

Similar Messages

Bex Query designer withour Enterprise Portal?

Dear BW experts,
After launching the Bex Query designer with BI7 system. After designing query, If I click on execute (Ctrl+R). It is launching internet explorer with error "Invalid Syntax error - Page cannot be displayed"
It is launching the following URL
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCCQ20071048070001&VARIABLE_SCREEN=X&DUMMY=1
I think it is looking for Enteprise Portal server. I dont have an EP server.
What is the alternate way to execute this?
Thanks in Advance...

Hello to all of you,
just to make sure that I do not missunderstand:
As far as I know in BW3.5 (without EP installed) you were able to execute a query directly out of the query designer and it was shown as a web-query.
Now I tried to do the same with a BI7-System the first time and I get the same symptom as Abdullah. We also do not have an EP installed on that system.
As solution, you all describe that I have to open the query in analyzer to see it in excel - OK - BUT if I do not want to see it in excel but as a webquery (like in my good old BW3.5) instead ? Isn't that possible anymore ???
Uwe

How to replace # or Not assigned with blank in BEx Query Output.

Hi,
While running the query through BEx Query desginer or Anlayser, I am getting # or Not assigned where there are no values.
The requirement is to "Replace # or Not assigned with a blank" in the output.
I want to know, is there any setting in BEx query desginer where we can do this. How to do this.
Please share your inputs on this. Any inputs on this would be appreciated.
Thanks,
Naveen

Check out SDN-thread: "Re: Remove 'Not assigned'" for more details
Ideas from SDN research:
"a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
"try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
Threads:
SDN: How to replace # or Not assigned with blank in BEx Query Output.
SDN: Re: Remove 'Not assigned
SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
SDN: Bex Analyzer : Text element system's table ?
SDN: change message in web application designer ["nonavailable" -> 136 of SAPLRRSV]
SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
SDN: replacing '#'-sign for 'not assigned' in queries
SDN: # in report when null in the cube
SDN: How to replace '#' with blank when there is no value for a date field
Edited by: Thomas Köpp on Sep 13, 2010 5:20 PM

Modifying the text "Result" and "Overall Result" in a BEx query output

Hi,
1) Is it possible to modify the text "Result", "Overall Result" which appears in the sub-total and grand total lines of BEx query output? I do not see any related setting the properties area of the object in BEx Query designer. Do I have to write some VB code or can I do something in Customer Exits?
Also my client wants that this text need to be made dynamic such as "Sub-Total for the month of Jan 2006".
I can use work book option and change the texts manually.But this is not meeting my clients requirement.
2)Is it possible to have dynamic title text for a BEx query?
We are on BW 3.5 & if any of you could provide / guidance to the above issue.
Thanks,
Venkatram

You will have to use VB Macros to change the text "Result" and "Overall Result", there is not settings in the query designer for the same.
You can have dynamic descriptions for queries using text variables like Expense Query for month of Jan 2006, if user selected Jan 2006.
Thanks.

Publishing a BEx Query reports from BI Portal to Main portal

Hi,
We have 2 portals in out landscape.
BI system has its own portal and the main portal for the commercial users.
I have a requirement to bring BEx query Reports to Main portal.
I am wondering, how this can be done.
Thanks
Sam

Hi vel,
1. You can connect BW/BI system with your portal.
2. Create BEx iview (7.0) from iview templates.
3. Then display report on portal.
Feel free to update me as per your findings.
Regards,
sam

Broadcasting to Enterprise Portal using Bex Broadcaster from Query Designer

I have already been able to broadcast from Query Designer using BEx Broadcaster to the portal based on a role or a user.
I select "Export into Enterprise Portal" as the Distribution Type.
I then select "Export Document to Personal Portfolio" and then enter a role.
Then I check "User-specific" because I want it to be user specific.
This all works fine.
Now I get to my question.
Can I go one step further and broadcast to a folder call... lets say "Sales" inside of their Personal Portfolio?

Hi Eric,
I have the same problem. Were you able to resolve it?

How to access BW RFC FM as web service from Enterprise portal using SSO

We have developed a custom remote function module in our BW system. We are accessing this function module as a webservice from a java class we have written. This java class access the BW webservice and formats the output. We created a webservice on top of this java class and deployed on the Enterprise Portal. SSO is setup between EP and BW systems. So when i make call to the BW RFC webservice, i would like to make use of SSO setup between EP and BW instead of hardcoding the user id and password while calling the webservice. Please advise on how to achive this.
Thanks for the help.
Thanks
Hari
Edited by: Hari Krishna Nalluri on Mar 19, 2008 12:41 PM

Hi,
Go to webserive perspective -> WebService Configuration -> Expand config node->Security-> Select HTTP Authentication and check Use SAP logon tickets option.
Ashutosh

Display BEx query in iFrame (non portal)?

Hi,
We're currently having trouble displaying a BEx query URL in an iFrame outside of the portal. Meaning, we have a different application web server that is attempting to point to the URL from the SAP server.
When we simply paste the URL in the web browser, it's not a problem; so the URL is ok. However, when we include the URL in an iFrame, the portal login screen appears, but soon after you log in, the page loops infinitely through the same request and never gets to the intended page.
Has anyone run into a solution for this situation?
Thanks

Hi,
Check this link....might be useful to ur reqq..
Access BEx Queries through non-SAP Portal
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/d08b00d73001b4e10000000a11466f/content.htm
Hope this helps u..
Best Reards,
VVenkat..

BEx Query Output Not Visible on the Dashboard.

Hi All,
I have a Dashboard which include 2 BEx Queries in it. When my end-user displays the Dashboard, he is able to see the result of one BEx Query and there is no result on from the second BEx Query. Both the queries are from same InfoCube and relevant authorizations have been provided to end-user.
Now, when I run the Dashboard, I am able to see both the Queries output on the Dashboard. I am sure, its must be some authorization issue, but I have provided all authorizations needed which were suggested by SAP to my end-user and the fact that they can see the result from one query and not from other confuses the things.
Would appreciate some inputs...
Thanks,
Mahesh

Now I did the further investigation using ST01 and guess what are checks were green..the authorization objects checked were below...
S_RFC
S_RS_COMP
S_RS_COMP1
S_RS_ICUBE
S_RS_RSTT
S_RS_XCLS
I would really appreciate some suggestions, should I open a SAP message or am I missing something...
Thanks in advance...
Mahesh

Output mismatch between BEx query output and WebI Report output

Hi All,
I have a BEx query in which there are only characteristics placed in rows.
There are combinations of the values of the characteristics giving different records in the query output.
Date is one of the characterisctics in the query output.
There is an output mismatch between the query output and the WebI report output in the following case:
When there are 'Not Assigned' or '#' or blank values, there are additional entries(rows) in the WebI report, giving repeating or wrong entries in the Date field. This is incorrect data.
Is this because of the 'Not Assigned' or '#' or blank values of the Characteristics or is there any other reason?
How do I fix this?
Please helo me with this.
Thanks and Regards,
Srilakshmi B

Hi Rajesh,
I need to verify the WebI report output for records with # and 'Not assigned' values for the cHracteristics in the report.
So I cannot check the WebI report by hiding the # or Not assigned values.
The problem is that in the Query output the records are like these shown below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)             No value
Where as the WebI report output is as below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)            Date1
As shown here, there are wrong/repeating entries for the Date field in the WebI report output.
Please check this and let me know what could be the issue and how do I fix it.
Thanks and Regards,
Srilakshmi B

Error from bex query while executing in portal

Dear Experts,
while executing the query bex analyzer, is working ok but the same query when executing in portal is throwing the following error:
error message:
The initial exception that caused the request to fail was:
Termination message sent
ABEND RS_EXCEPTION (000): The argument '0,01' cannot be interpreted as a number
MSGV1: The argument '0,01' cannot be interpreted as a
MSGV2: number
Messages
ABEND: The argument '0,01' cannot be interpreted as a number
ABEND: An exception with the type CX_SY_CONVERSION_NO_NUMBER occurred, but was neither handled locally, nor declared in a RAISING
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
I tried to find from existing blogs but did not get suggestions for similar issue.
Coud some be kind enought to analyse this error.
Inputs will highly been appreciated
Thanks in advance,

Hi,
Here I tried retransporting the depended bex queries accross the landscape.
Now the reports are OK from the Portal.
Thanks,
Mannu

Total Line in BEX query output

Hello,
    I have a requirement, where we have to show just total line in output for BEX query. We want to hide {though hide feature will not work} line items that we process. How can we do it?
   Requirement goes like this:
   Let say for orders, we have order requested date and actual delivered date. The query formula processes all line items for given selection and measures ontime, late and early shipments based on date in variable exit we have. At output (that is in total line)query will write have % ontime late early.
   So for selection calmonth we need to show % ontime late early but for that we need to process all line items to get % calculation. So, how can I keep only total line in query output.
For example: Output should look like for selection of calmonth, plant - product or shipping point etc..
Calmonth plant - % ontime late early or
Calmonth product - % ontime late early or
Calmonth shipping point - % ontime late early
It is working in a way it shows all line items and total line at last. All I want is total line and ignore line items.
Thanks,
Aj

Remove the drilldowns for the "detail" characteristics that you do not want to see. The report will then display only the "totals" that you do want to see.
Hope this helps...
Bob

Hyperlink of BEx query output

Hi all,
Is there any way from which i will get Hyperlink of the BEx query. I need to call particular Bex query thru that hyperlink.
amit shetye

The system generates the URL, with this format.
http://SERVERNAME:PORTNUMBER/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=QUERYNAME
SERVERNAME,PORTNUMBER & QUERYNAME to be replaced appropriately
-kiran

BW - Alternative for # (hash/pound)sign in bex query output to Microstrategy

Hello team,
We have a requirement to display BEx report output to the reporting tool Microstrategy. They are accessing the BEx query as the source. The issue we are facing is :- when there is no value for a characteristic, it displays a # sign in the report. This is the normal behavior of SAP BW. But Microstrategy is not able to access this pound/hash symbol and they want us to display a blank space instead of # sign. I was wondering whether there is any alternative for displaying blank space instead of hash/pound sign???

Hi Jerry,
Yeah, I think that's the only way to maintain it..
OR
How do you load data to your MASTERDATA object? You can just include "SPACE" value in the EXCEL file (if your datasource is a FLATFILE) or make a "SPACE" value in the transformation level..
Regards,
Loed

How do i integrate GMail into Enterprise Portal using a URL iView?

Hi,
Can some one tell me ohw i can integrate GMail or any other Mail into portal using URL iView or any other iView?

Hi nadh,
See if by any chance, the following links prove to be of any help:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=207925">https://www.sdn.sap.com/irj/sdn/thread?threadID=207925</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=137144">https://www.sdn.sap.com/irj/sdn/thread?threadID=137144</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=63299">https://www.sdn.sap.com/irj/sdn/thread?threadID=63299</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=95643">https://www.sdn.sap.com/irj/sdn/thread?threadID=95643</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm</a>
Bye
Ankur
Do reward points if it helps!!

BEx Query output in Enterprise Portal using "Information Broadcasting"

Similar Messages

Maybe you are looking for