Bex Report Designer: Error while loading metadata

hi experts,
I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
Error while loading metadata.
Check the Query and portal settings.(but the query is working fine in Analyzer).
and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
when i double click the error its giving below error details.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
could you plz suggest me how to rectify the problem.
regards
vadlamudi

Hi vadlamudi
The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
Regards,
Janine

Similar Messages

BEx report designer error

Hi,
When am trying open Query in BEx report designer it is getting below error plz help me to solve this issue.
error while loading query metadata check the wuery and portal settings
RSBOLAP 017 Java communication error : RFC destination NOT_CONFIGURD Does not exist
Thanks,
Medha.

Hi Medha
this is due to two reaso
1 For the system IP there should be open a port
2 May be its a authorization problem check this object is added or not S_RFC
Shashi..

Error while loading metadata in HPCM application using Import Staging table

Hello All,
I was loading metadata in HPCM using Import Staging table. I successfully uploaded Driver Definition metadata.
However while loading "Driver Exception" metadata, I am not able to load it successfully. I have checked the HPCM logs but found nothing. I then checked the "Import Exception" table and found the following error message.
ERROR_POPULATED_DIM_COLUMNS_DO_NOT_MATCH_STAGE_DEFINITIONCan anyone please help me with this.
Regards,
-SM

It is a bug and there is a patch available.
Oracle Support - "Bug 12905298 : INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
Patch = 12905298: INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
Cheers
John
http://john-goodwin.blogspot.com/

Report Designer - Error when Loading Report

Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
Hemant

Hello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development

Report Designer - Error while opening a saved report

Hi,
I am not sure if this is an authorization issue or configuration issue.
When I try to open a saved report on Report designer, I keeping getting an error: Report Version is invalid: "0".
Has anybody faced similar problem?
We are on SP09.
Regards,
Payal.

Payal,
I am afraid, that your report might be corrupted. This might have happened, if in tx SE16 the version is changed. The Report XML displayed in SE16 for table RSERDATA, is limited to ca. 1024 charachters. When editing the version, after pressing the save button, the Report XML is cut off at 1024 charachters and the report is lost.
Please do not set the report version in tx SE16!
I will need to configure the program RS_REPORT_MAINTAIN, such that reports with version "0" can be saved with the minimum version 9.0.
Until then I recommend the following procedure for Reports that are ok, but have the Version "0" bug:
1) in tx SE38, program: RS_REPORT_MAINTAIN
    open your report with option "DT" (designtime)
2) Switch to Edit mode.
    Make a backup copy of the report using the "Save As" Button.
    You can copy the Report XML to the clipboard using Ctrl-A, Ctrl-C
3a) Open a dummy report in RS_REPORT_MAINTAIN created previously with
      Report Desginer ( --> The version is set to 9.0).
      Switch to edit mode and paste the Report XML and Save.
or
3b) Debug FUNCTION rs_bex_report_load_rfc.
      Open a report and change the value of E_REPORT_VERSION to "9.0"
      before leaving the function.
Hope this helps, karim
P.S.
I will update note 1016224

Error while loading metadata into planning using ODI

Hi John,
While trying toload members into planning using ODI the following error occurred. Please suggest
java.lang.Exception
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Hi John,
While trying toload members into planning using ODI the following error occurred. Please suggest
java.lang.Exception
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Error Message in BEx Report Designer 7.0

I am getting the following error message when I try to add a data provider (Query) to BEx Report Designer:
RSBOLAP 017 Java Communication Error: RFC destination NOT_CONFIGURED does not exist
Would anyone be able to provide feedback on what to do?

Hi Selva Kumar,
Its a Basis Issue , report to a Basis asministrator about the configuration of Report Designer .
For info refer this link:
https://forums.sdn.sap.com/click.jspa?searchID=21289661&messageID=6734602
Cheers,
Tanish

Run Time Errors in BEx Report Designer?....asking for Portal Setup??

In BEx Report Designer, I keep getting short dumps and timeouts when trying to design flashy reports.
I keep getting 2 errors when I time out:
1. 'Query (view) definition cannot be retrieved from Portal.
Please try again or check query and Portal Setup!
Time limit exceeded.
2. xxx Error when reading Query (via BICS)
Please check query and Portal setup!
Time limit exceeded.
We are running ECC 6.0, BI2004s, and SEM 6.0. All in Sandbox/Dev environment.
We are NOT running EP.
I am aware that we have some memory issues, and we're adding 4Gb more on Thursday....can the solution be that simple, or are these errors telling me we need Portals installed? I was under the impression that Portals were NOT required for 2004s, so long as you did not use WAD etc.
Any thoughts??

You would need to install portals(EP) for the report designer to work. When you design your flashy report in designer and try it launch it... it would try to connect to EP to publish it. It bombs when it doesnt find the portal.
On a personal note: Report designer have a long way to go when you think the output would be something like crystal .. NO not yet ... But SAP just got started ... I think they would be there pretty soon. And they promise many enhancements as of SP 13.. so lets all wait.

MainPage.xaml throws an error while loading designer.

Hello,
I am new to WIndows store app development.
I am creating a sample windows store App using VC++ UAP using Visual Studio 2015 CTP5.
MainPage.xaml throws an error while loading the designer:
"The element [Grid] could not be displayed because of a problem with WIndows..UI.Xaml.Control.Grid"
Exception:
NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.VisualStudio.DesignTools.WindowsXamlDesigner.WindowsStoreXamlPlatform.get_ThemeResources()
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.FindInstantiatedResource(IInstanceBuilderContext context, ViewNode viewNode, DocumentNode documentNode, DocumentNode keyNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.UpdatePropertyOrChildValue(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, Int32 childIndex, DocumentNodeChangeAction action, DocumentNode valueNode, ViewNode& childViewNode, IInstanceBuilder& valueBuilder, Boolean& isNewInstance)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.UpdateProperty(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, DocumentNode valueNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.DependencyObjectInstanceBuilderBase`1.UpdateProperty(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, DocumentNode valueNode)
at Microsoft.VisualStudio.DesignTools.WindowsXamlDesigner.InstanceBuilders.FrameworkElementInstanceBuilder.UpdateProperty(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, DocumentNode valueNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.InstantiateProperties(IInstanceBuilderContext context, ViewNode viewNode, DocumentCompositeNode compositeNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.Initialize(IInstanceBuilderContext context, ViewNode viewNode, Boolean isNewInstance)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ViewNodeManager.InitializeInstance(IInstanceBuilder builder, ViewNode viewNode, Boolean isNewInstance)
The default contents of MainPage.Xaml for windows 8.1 project is :
<Page
x:Class="HelloWorld.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:HelloWorld"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d">
<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
</Grid>
</Page>
The windows Phone 8.1 project loads the MainPage.xaml correctly. What is wrong with MainPage.xaml of Windows 8.1 project ?
Thanks,
Kunal

There is nothing wrong with the code.
>> using Visual Studio 2015 CTP5.
You're using a beta version of Visual Studio. Try using VS2013 instead. There's probably a bug.
It could also be a problem with your Visual Studio install. Try repairing and/or reinstalling.
Does taking out the Background property fix the issue? (i.e. just leave a completely empty grid)
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

Error while loading Reported Financial Data from Data Stream

Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
Amir

Found the answer with OSS Note: 642591.....
Thanks

Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?

hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti.

Bex Report Designer - Large amount of data issue

Hi Experts,
I am trying to execute (on Portal) report made in BEx Report Designer, with about 30 000 pages, and the only thing I am getting is a blank page. Everything works fine at about 3000 pages. Do I need to set something to allow processing such large amount of data?
Regards
Vladimir

Hi Sauro,
I have not seen this behavior, but it has been a while since I tried to send an input schedule that large. I think the last time was on a BPC NW 7.0 SP06 system and it worked OK. If you are on a recent support package, then you should search for relevant notes (none come to mind for me, but searching yourself is always a good idea) and if you don't find one then you should open a support message with SAP, with very specific instructions for recreating the problem from a clean input-schedule.
Good luck,
Ethan

Proc: error while loading shared libraries: libwtc9.so

Hi,
I have a server with RHAS 3.0, and installed 10g database and 10g Forms and Reports.
Now, I try to compile my ProC but I receive the following error:
"[sustore@teste01 src]$ ./comp_all
conv_scci.pc
conv_scci.pc
proc: error while loading shared libraries: libwtc9.so: cannot open shared object file: No such file or directory
make: *** [conv_scci] Error 127
COMPILE_ERROR IN conv_scci.pc
COMPILE_ERROR IN conv_scci.pc
help_eaf.pc
" etc...
Can anyone help me?
Thanks,
Carlos

ry to do this:
find / -name libwtc9.so
will be appear path where is placed this library
and/or without firts step define following ENV var:
if already declared LD_LIBRARY_PATH
export source LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:<path where is placed you library>
if not declared LD_LIBRARY_PATH
export source LD_LIBRARY_PATH=/usr/lib:/user/sbin/lib:<path where is placed you library>

Error while loading shared libraries: libtasn1.so.3: cannot open share

Hello,
I have done an update to the system today and now I see the following error:
emacs: error while loading shared libraries: libtasn1.so.3: cannot open shared object file: No such file or directory
same happens if I try to open epiphany.
I have:
extra/libtasn1 3.0-1 [installed]
I tried to reinstall it, but there is no effect. Any idea what I can do to fix this?
Thanks!

looking at the file list, libtasn1 3.0-1 comes with libtasn1.so.6. The packages that depend on it will need to be rebuilt for the soname bump. If you're sure that you're completely up to date, file a bug report. If you got the versions of the programs you're using from the AUR, rebuild them yourself.
Last edited by Scimmia (2012-11-05 14:34:01)

Error while loading shared libraries: libgnutls.so.30

after today's update,whenever i start kodi or mplayer, reporting:
error while loading shared libraries: libgnutls.so.30: cannot open shared object file: No such file or directory
and i checked /lib ,there is only libgnutls.so.28, and a soft link to libgnutls.so.30 not work.
Last edited by frat (2015-04-19 14:22:29)

Stevearch wrote:Can i ask how you knew to do that? Just so i know for if this problem happens in the future.
Sigh.
jasonwryan wrote:Rebuilding AUR packages is your responsibility...
Mr.Elendig wrote:It is really simple: Just rebuild anything that links against the old gnutls.
And, despite JWRs warning this thread seems to perpetually draw hijackers for unrelated AUR issues.
Closed. The original issue is long since resolved. (frat, if you feel otherwise and wish to reopen your thread, please let me know and I'll excise all the unrelated cruft that's collected)

Bex Report Designer: Error while loading metadata

Similar Messages

Maybe you are looking for