Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

Similar Messages

Report does not show updated data

Hi,
We are currently testing our AV implementation.
AV server, agent and collectors are up, but the reports are not being updated.
Reports are showing data as of Dec-22-2009, which is when the last time the unix servers (for both AV and source dbs) were rebooted.
We can see collection is happening:
SQL> select max(av_time) from avsys.av$rads_flat;
MAX(AV_TIME)
19-JAN-10 12.34.41.150446 PM
But the dw table is not being updated:
SQL> select max(av_time) from avsys.audit_event_fact;
MAX(AV_TIME)
22-DEC-09 04.58.55.255456 PM
Does anybody have any idea?
thank you

hi Karun,
correction, there are a couple of trace files after the db was restarted prior to starting AV and the collectors.
below are the message content:
trace file #1)
Instance name: AVDB
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 24635, image: oracle@audit1
Dynamic strand is set to TRUE
Running with 2 shared and 48 private strand(s). Zero-copy redo is FALSE
trace file #2)
Instance name: AVDB
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 24922, image: oracle@audit1 (TNS V1-V3)
*** ACTION NAME:() 2010-01-19 14:39:46.215
*** MODULE NAME:(sqlplus@audit1 (TNS V1-V3)) 2010-01-19 14:39:46.215
*** SERVICE NAME:(SYS$USERS) 2010-01-19 14:39:46.215
*** SESSION ID:(213.1) 2010-01-19 14:39:46.215
kwqmnich: current time:: 22: 39: 46
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
what could this mean?
thank you!

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

WT reporter does not show split for tax authorities!

Dear all:
I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
Do you have any work around for this?
I would appreciate any tip or workaround on this,
Thank you!

Hi
1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
br, Ajay M

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Report does not show Quotation price

Dear friends,
What may be the reason, that my report does not show the quiotation price, though Sales order price, revenue price shows normal?
Please give some probabilities.
Rao

check your plan profile OPSB if automatic rev planning for both Quotation and Sales order is ticked

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Report does not show data , but data exists in the cube.

Hi All,
I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
It shows the data if I load directly from the extractor, but not when I load data thru DSO.
Any ideas.
Alex(Arthur Samson)

Hi Alex,
I am facing same problem, i have data in cube but in report i cant see....
i have created a generic DS, i loaded the data to DSO then CUBE.
data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
i think you solve this issue... plz help me to resolve this issue.
Regards,
SHAIK.

IPod Nano directory does not show loaded tracks

I have a 7th Gen iPod Nano that was formatted by iTunes for Windows 7 that does not show the tracks loaded on it once it is ejected. Apple has replaced the Nano twice with no change. Working with AppleCare Support I have removed iTunes and everything else from Apple several times in accordance with the "Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8" Knowledge Base article. We tried various cables and different USB ports but they made no difference. In between each removal I have run CCleaner's registry search and cleanup tool and restarted the computer. Windows 7 is and has been up to date and the version of iTunes has always been the latest. iTunes will recognize the Nano and I can load playlists on it but once I eject it and select the music icon it says that there is no music loaded. When I check to see if the iPod knows that there is anything loaded it shows that there is something loaded by virtue of the fact that it shows the same amount of free space as iTunes did just before it was ejected. I have spent a couple of weeks chasing this problem with the AppleCare Support Team in Cupertino and we are all stumped.
     I do not have any problems when I connect my iPod Classic to the same computer and load tracks on it.
     All of the Nano's that have experienced this problem have worked fine when restored on my Mac.
     The original Nano worked fine with this Windows 7 computer for about 9 months and then started saying that it needed to be restored every time it was connected even if it had just been restored. That problem brought about the first replacement of the Nano. After all of our efforts the AppleCare Support Team suggested that we replace the Nano again so that is what we did this week with no resolution of the problem.
     Does anyone know of any Windows software that is known to create problems with iTunes?
     I had not connected a Nano to the computer for about 2 months before I started having problems so I have no way of determining what might have been installed that caused this problem. This is a company computer and all software installations and updates are controlled by our IT Dept. iTunes is supported by the company due to the fact that our IT Dept. personnel and senior management have company iPhones and some iPads. We did connect the Nano to one of the IT computers and it was recognized and iTunes was able to see the tracks loaded but there was nothing available once it was ejected.
     Any assistance will be greatly appreciated.
Tom Davis

1. Shouldn't you be posting on the Nano Section?
2. UPDATE your iTUNES
3. It should be fixed...if not reply

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Depreciation Simulation report does not show future years Depreciation

Hi experts
Depreciation Simulation report (S_ALR_87012936) does not show future years simulated depreciation for depreciation areas other than 01. I try to run for 7 years in future, other then area 01, all other areas only show the current fiscal year and zero for future years even though there are values.
Any ideas would be much appreciated.
Edited by: AG on May 5, 2011 1:21 AM

Hi
Please check settings of Simulation Varinat at IMG> Financial Accounting>Asset Accounting>Information System>Define Simulation Variants for Depreciation Reports. Check settings for depreciation ares for which you are facing issue.
Hope this helps!!
Murlidhar Khatri

Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Metric shows real time value but does not show historical data

I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
When I check metric value history,
For all the columns like Last Known Value,
Collection Time stamp,
Average Value,
High Value,
Low Value
it shows no data.It even does not show anything in Metric Value History graph.
Even the metric test in Metric Extension works fine.
All the client agents are uploading the the data to OEM successfully.
Any help,guide is appreciated.

bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

Bex report does not show loaded data at once

Similar Messages

Maybe you are looking for