Bex selection screen does not appear when running workbook via RRMX.

Hi Experts,
I have following problem: When I run a BEx workbook from a user menu (trans. RRMX), I get no selection screen, but just the workbook with text: "no data found". When I press the refresh button (variable change button), the selection screen appears and after that the data are visible in the workbook. When I run the underlying query the selection screen appears normally. With some other workbooks with selections I do not have such a problem.
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Thank you,
Michal

Dear Michal,
Your Question:
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Answer:
Open the workbook and goto workbook setting from the analyzer design toolbar.
Check the Refresh workbook on check box.
So every time the selection screen will be appear after exectuion of the workbook.
Thanks & Regards,
Praveen.K

Similar Messages

  • Query Selection Screen does not appear in Web Analyzer

    Hi Experts,
    Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
    As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
    Kindly let me know the possibility for selection screen not appearing.
    Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
    Regards
    Suresh Kumar

    Dear Suresh,
    You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
    In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
    Also I would like to explain you the behavior of Web Analyzer,
    Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
    when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
    affect the variable screen and would not redisplay the variable screen as you require.
    Regards,
    Arvind

  • ITunes screen does not appear when I try to open

    ITunes screen does not appear when I try to open.   I can play music by using "controls" but screen does not open.

    What did your email provider say about it when you contacted them?

  • JAX-RPC screen does not appear when generating a WS proxy

    I'm using JDev 11.1.1.2. When I tried to generate a Web Service proxy, this screen does NOT appear most of the time. I only saw it appear one time. Do you know why?
    It's step 2 of the wizard.
    Client Style
    + JAX-RPC Web Logic Style
    + JAX-WS Style

    Whenever one tries to generate web service proxies for the first time, JDeveloper allows the user to choose the client style (JAX-RPC Web Logic Style OR JAX-WS Style).
    Once the option is selected, JDeveloper automatically adds the dependent jars in the classpath. When one tries to generate the proxies a second time,
    JDeveloper does not provide an option to select the client type. It defaults to the one which was selected for the first time.
    I was able to overcome the problem using the following approach.
    1. For JAX-RPC client style:
    Right Click the Model (or ViewController) project -> Project Properties -> Libraries and Classpath ->
    Add Library -> select JAX-RPC Web Logic Client, JAX-RPC 11 Web Services
    Remove JAX-WS Web Services library (if present)
    2. For JAX-WS client style:
    Right Click the Model (or ViewController) project -> Project Properties -> Libraries and Classpath ->
    Add Library -> JAX-WS Web Services
    Remove JAX-RPC related libraries (if present)
    I am using Jdeveloper Version 11.1.1.4.0
    - Pranab Garad

  • Log-In Screen Does Not Appear When Resuming From Standby/Sleep

    We are running T400s with XP SP3. From time to time when the computer comes out of standby the login screen will not appear. You just get the background image and your mouse. The mouse will move across the screen. However there is no screen saying press Ctrl+Alt+Del or swipe a finger to login. Also swiping a finger, or pressing ctr+alt+del, typing in your password and hitting Enter does not work either. It seems to be a random but frequent occurence. The couple of T400s with Vista installed do not have this problem. Any ideas?

    After doing some troubleshooting I narrowed it down to the FingerPrint reader software.  Sure enough after uninstalling it fixed the issue but then the finger print reader is useless.  I looked at the latest Version, 3.2.0.116, readme file and it states:
    <3.2.0.116>
     - (Fix) Fingerprint Reader is not working ater 1 minute idle.
     - (Fix) Fingerprint Reader is not working after standby/resume.
    I am wondering if they are still working out the bugs, nothice the "l" missing from later. Any help would be a big plus as I need to roll out about 200 or so for my employer in the next month.

  • Form does not appear when run through Form Builder

    Hello,
    We are trying to get a new installation of Form Builder 10g to work. When we try to run the form, the Forms Service browser comes up, but the form does not. We are likely missing a setting in some config file. Can anyone help us?
    Thank you,

    Thanks for your efforts.
    I have searched the forum, but maybe have not hit the correct key words yet. If you can suggest better search parameters than I have used, I will try again.
    The popup blocker settings are the same as on other PCs that work correctly.
    Our tnsnames is also good, as we are connecting through Form Builder.
    I tried researching the error message that was requested, but the error code and message did not match up.
    I would appreciate any other suggestions.

  • Welcome screen does not appear when I open Elements 10

    Following installation of a new hard drive, I re-installed Elements 10.  However, I now don't get the Welcome page when I open it. It goes straight to EDIT. This never happened before.  How do I change this so that the Welcome page appears?  I have un-installed and re-installed Elements, but that has made no difference.

    Hi,
    Glad you have got it working.
    The preferences are never touched when you uninstall elements. In the majority of cases this is an advantage in that you can reload the code without affecting your settings.
    If you need to reset the preferences, there are ways to do it. Occasionally it is necessary to reset them when strange things happen.
    Some people have trouble with Welcome screen and it became known as the Unwelcome screen. In that case they use shortcuts direct to the application of their choice. I tend to have a shortcut direct to the organizer because that is where I always start from.
    Good luck,
    Brian

  • How do I know if private browsing is working? The purple mask does not appear when I click the mask icon. In my privacy settings "Never Remember" is selected.

    I'm trying to confirm private browsing is working. Right now I have no way of knowing if it is on or not. The purple mask ,referred to in help, does not appear when selected. I should say in my privacy settings, I have selected "Never Remember" for history.

    Do you mean you have checked the box: "Always use private browsing mode"? If so, it's intentional that the private browsing icon isn't displayed as we didn't want Firefox to be showing everyone within view that you're using private browsing mode IIRC.
    There are some easy things you can do to confirm that you are in private browsing mode such as visiting a new website and then confirming it doesn't appear in the history window.

  • TS2972 My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    You'll have to contact the developer about this. Apple doesn't make this app;

  • My main menu does not appear when I turn on my apple tv first generation.  How do I restore my main menu?

    My main menu does not appear when I turn on my apple TV first generation, how do I restore my main menu screen?

    When I turn on, it asks for language choice, then it asks for 1080i, then it asks for network choices.  I choose my network, then it asks for my network password.  I enter the password, then it say it does not connect to network, and if I hit menu on remote, it goes back to network selection.  I can not get to main menu to see my setting for the network, because there is no menu. 

  • HT201406 1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

  • The download button does not appear when I try to download Flash Player

    The download button does not appear when I try to download Flash Player on my MacBook Pro.  I'm using Firefox.  I uninstalled Flash Player yesterday and can't download the newest version 11.6.602.180 today, help!

    Here's the current link to the offline installer:
    http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    Are you running any ad-blocking or anti-tracking plugins?  When the product download center appears broken, those are common contributors.

  • HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

    Hi,
    I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
    Is there a way to make the iPhone try to open the login page?
    Ben.

    I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
    My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
    But, sometimes it works the first time or suddenly for no reason.
    Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

  • Since upgrading to 5.1, my oncreen keyboard does not appear when it needs to

    since i have done the upgrade, my on-screen keyboard does not appear when it needs to.  I keep having to restart my system to make it happen....  Is there a special way to display the keyboard manually, or should it be automatic?

    Hellow keith5000 ,
    regarding your issue lets see what we can do to solve this issue.
    - have you tried safe boot
    safe boot = starting up the mac with the SHIFT- button.
    - when entering safe mode you will be able to enter and quick change some settings
    now next question do the unwanted aplications still load in safe mode , if so
    go to the Apple icon -> System preferences -> user & groups -> login items (top right on the screen from user & groups window)  now at login items u can close any unwanted aplications by deleting them or unmarking them
    - unwanted aplications will now disapear when starting up your mac os x system
    - next issue should be your authentication , this will be a bit more tricky , lets see
    same category user & groups and u will see your admin account try seeing if u have enabled the admin account right click on your admin account to see information about it and compare it if your info is correct , next see if you have authorized your admin account to write & read.
    if these still don't work , make a test account to see if this problem is user wide or system wide.

  • Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

    Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
    == today

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Maybe you are looking for