Bex to Business Objects - Currency Conversion error in Webi

Hello,
I am attempting to transfer a Bex 7 key figure currency conversion to a Business Objects filter in a Universe for display in a Webi report. The version of Business Objects XI 3.1 SP2. The Bex Conversion Type is based off Calendar Month, and the Target Currency variable is a selection prompt. The filter is passed to the universe and prompts when the report is ran in Webi, but an error occurs if the currency is populated. For instance, if I populate the filter in Webi with 'USD', the following error occurs: The MDS query SELECT "....." failed to execute with the error Value 'USD' FOR variable "Currency" is invalid (WIS 10901).
I'm not sure if the currency conversion information is being properly transferred and translated to Business Objects. Does anyone have any insight on this issue?
Thank you,
Brock

I was able to modify the dimension for the filter to retrieve the correct object (Ex. USD), but there are multiple incorrect selections for USD and other currency types. For instance, when I type in USD i get 5 different options, and the one with the description 'American Dollar' is the correct one. Why is Webi displaying all these different options? When I display the options for currency in Bex only one 'USD' is shown in the list. Here is my filter condition for currency type in the Universe:
<OPTIONAL><FILTER KEY="[SELCUR]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Select Currency','A','Organization\Cur Key',mono,primary_key)"/></CONDITION></FILTER></OPTIONAL>
Cur Key is my customized hidden dimension
Thank you

Similar Messages

Currency conversion Error in 0sd_c15

Hello Experts,
I am having a problem in the ETl of the cube 0SD_C15 .Its showing Currency conversion error
0MEANTODAY while loading data.Please help me in this regard
Prasad

Hi
You will find the transfer global settings for the source system where you are extracting the data.
Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
Then Reload the data into the cube,
After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
I think, this will work....
Regards
Sudheer

Unable to create shopping cart due to currency conversion error.

Hi,
We are currently working in a extended classic scenario. We have about 8 users connected under a common entity ( dept). Out of which for one user (user1) we are able to create the shopping cart and able to run the entire procurement cycle the entire cycle.
When we are trying to create a SHC with any other user ( user2 to 8) its giving the errors like
1) Currency Conversion Error ( to GBP). Please inform help desk.
2) Error in account assignment for item 0.
Attributes for all the users ( user1 to user8) are same and we are not getting any error in the attribute check as well.
Please suggest.

Look up note 419423 + related notes to repair incorrect SRM users. What you report sounds a bit strange. A debugging session might be helpful too. Especially the 2nd error looks like something 'home-made'...

Business Rule Currency Conversion and Carry Forward

Hello Guys,
I have a question related to the Business Rules Currency Conversion and Carry Forward
I configured the business rule "Currency Conversion" and I selected "Apply to Periodic". What this rules does with the flag selected is to get the value of the previous month converted and add the factor (Local Currency previos month - Local Currency Actual month) * Exchange Rate of Current Month
For Example: USD previos month +
This rule applies perfectly from FEB to DEC but if I run it for January, it does not consider the value of USD previos month and LC previous month for calculations so the result I get is:
(and of course it´s because it only applies to periodic)
I need to include into my results this amounts and factor so the question is: Is not a flag I can activate to force the system to act as it does for FEB to DEC periodic ??
I also set up the Business Rule "Carry Forward" so with this rule Im able to bring values converted in USD from DEC to JAN for example from a Data Source Input, but the problem is that it erase any other value I have in other Data Source members and I need to keep that info.
Hope you can come with a suggestion.
Im working with SAP BPC NW 7.5 SP08

Hello guys,
Yes, my fiscal year is from JAN to DEC and Im using a YTD app,
As you mentioned for P&L accounts the rule works fine; but we want to carry forward LEQ accounts. Is there a way to use or configure the currency conversion rule with the flag "Apply to Periodic" to carry forward LEQ accounts for the next following year?
Here is how we configured our Carry Forward Business Rule
Source and Destionation account = 4111
Source and destionation Flow= FCLO
Reverse Sign= False
Data Source Type= ALL
Same Period= False
Apply to Periodic=False
Opening Data Source=DatosBase
Source Data Source = AJ_AC
Regards

Currency conversion error in SAP HANA

Hi,
I am new to SAP HANA and learning to create information views in HANA studio (SAP HANA SP6 on Cloudshare, HANA studio 1.0.68). I am trying to create a simple analytic view (on purchaseOrderItem table in SAP_HANA_EPM_DEMO sample database) to have GrossAmount converted to EUR.
I added a calculated column as follows:
When i click on "OK", i get error -
The check box “Calculate before aggregation” has been unchecked, because the definition of the calculated column contains measures with currency conversion, restricted measures or operands with input parameters. For such a calculated column the calculation is always done after the aggregation."
and checkbox "calculate before aggregation" get unchecked. See screenshot below:
Please suggest what could be reason? Thanks in advance.
Regards,
Amit

Hi Amit,
If you uncheck the "Calculate before aggregation" checkbox and activate the view, you will see in the generated log that a Calc scenario is created. (a view with /olap wrapper). Due to the calc scenario, the aggregation is defined as the default behavior for the KFs and hence the calculation cannot be done before aggregation.
By the way, I did not understand why do you need calculate before aggregation for a KF which is just a copy of another KF. If you need Gross amount in Local currency and EUR, then just perform the currency conversion without "Calculate before aggregation" checkbox. It will work.
Regards,
Ravi

Currency conversion error in SRM

Hi,
When we are trying post the confirmation in SRM it is giving the error message that "Error in currency conversion between EUR and USD".
We have checked the exchange rate settings in SRM and Backend (R/3) there is no issue at all. Everything is maintained properly but still the sytem is giving error.
PO currency and vendor currency is USD and company code currency is EUR.
Is there any other settings missing which is causing the error.
Thanks in Advance
S.Parvahi

hELLO Parvahi,
Did you check OB08 in backend if maintained properly? also check validity...
also on the SRM side is below report run using SA38?
Update exchange rate tables in component system :BBP_GET_EXRATE
Hope that helps
Arshad
Edited by: arshad ahmed on Feb 9, 2010 12:06 PM

Currency conversion error by changing the currency

Hi all,
i am facing a problem by refreshing the query with another currency. f.e. i am calling the report in Euro and then i say refresh variables and change the currency in USD. So i get the same values and the currency conversion dont work.
I get the following alert message after i change the currency and run the report.
Diagnosis
You attempted to convert a currency. The system cannot find a valid currency into which to convert the value.
System Response
The OLAP processor cannot convert the currency. The drilldown is not changed.
Procedure
Specify a valid target currency.
Procedure for System Administration
This message can only appear for Web templates in which currency conversion is set manually (using the SAP BW URL). If this message appears following a currency conversion dialog box, an SAP error has occurred; report this error using OSS.
Can someone help me before i open a OSS error. Thanks.

Hi,
did you check the setting in BI for source system ?
Else just try it
RSA1 - goto source system
Expand SAP
Context Menu of Source System
There are
Global Settings
Transfer Exchange Rate
Hope it will help you ...
BVR

Currency COnversion Error: RUN_LOGIC:Member LC not exist.......Please help

Hi All,
I am trying to run currency conversion and following is my script logic.
*RUN_PROGRAM CURR_CONVERSION
      CATEGORY = %CATEGORY_SET%
      TID_RA = %TIME_SET%
      RATEENTITY = GLOBAL
      CURRENCY = %RPTCURRENCY_SET%
      OTHER = [ENTITY=%P_CC_SET%]
*ENDRUN_PROGRAM
I have also tried the following reading from other post
*RUN_PROGRAM CURR_CONVERSION
      SELECT(%RptCurrency_SET%,"[ID]",RptCurrency,"[CURRENCY_TYPE]='R'")
      CATEGORY = %CATEGORY_SET%
      TID_RA = %TIME_SET%
      RATEENTITY = GLOBAL
      CURRENCY = %RptCurrency_SET%
      OTHER = [ENTITY=%P_CC_SET%]
*ENDRUN_PROGRAM
My RPTCURRENCY dimension had following entries
ID REPORTING CURRENCY_TYPE
USD Y R
EUR Y R
LC       L
Also my Currency Conversion data package selection is as follows:
P_CC: ALL
CATEGORY: ACTUAL
RPTCURRENCY: ALL
TIME: 2008.JAN
Following is the error
RUN_LOGIC:Member "LC" not exist
Failed
Application: PLANNING Package status: ERROR
Please help.
Thanks,
Diksha.

Hi All,
My LGX files is as follow
*RUN_PROGRAM CURR_CONVERSION
SELECT(,[ID],RptCurrency,[CURRENCY_TYPE]='R' )
CATEGORY =
TID_RA =
RATEENTITY = GLOBAL
CURRENCY =
OTHER = [ENTITY=]
*ENDRUN_PROGRAM
If I am not wrong it should have substituted vales for variable %RptCurrency_SET% to USD and EUR.
Please let me know.
Diksha.
Edited by: Diksha Chopra on Dec 22, 2010 5:27 AM

BEx or Business Object

Since the union of BO and SAP, BEx will stay as the suite tool for buildind BI Apps??
or Business Object will replace all BEx suite?.
Nowadays . Certification courses are incluiding BEx in the syllabus and nothind abour BO, is this course un-upgraded?
Best Regards
Joseph

Anyone interested in how the BOBJ acquisition plays out really needs to review teh roadmap document and one of the SAP or ASUG presentations. It is a complex and fluid situation.
While the roadmap appears to show many BOBJ products "replacing" existing SAP BI tools, you need to be careful. Things like WebI, Xcelsius, Voyager/Pioneer are "premium" offerings - what that means is you will need to buy them - they will not simply be delivered to you as part of your existing BW base licensing.
There is even confusion about Crystal. I was just at an event at SAP Americas HQ in Newtown Square. A consultant making a presentation to the ASUG chapter reported that they had just met with SAP execs with one of their clients and was explicitly told that Crystal would also have to be licensed, however an SAP employee siad that you would receive a restricted license for Crystal as part of your BW base license, but it would only be usable to report on BW data. If you wanted to use it to report on R3 or other data sources, you would have to purchase additional licenses. So I don't know who's right in this case.
Your BEx tools don't go away in 2010 - they are supported for several years beyond, at least 2014, or perhaps it was 2016, however they will not be enhanced beyond 7.1. BEx Query Designer remains regardless. You would still use the Query Designer, with quereis becoming the basis for BOBJ Universes.
Visual Composer also remains and will be enhanced.
It is important to understand what will be coming, and I don't think SAP has done a very good job of explaining how the BOBJ products must be purchased. They need to provide more, better, and consistent info regarding products, costs, etc. I suspect they will be flexible on some of the licensing and if you have good negotiating skills and /or are a referenceable client, you may be able to do better.
Everyone should press their SAP Reps to clarify the Roadmap document and costs.

CONVERT_TO_LOCAL_CURRENCY currency conversion errors in Delta mode

Hello,
I have been working with SAP via customer messages for a month now with no resolution. As many of you have experienced, the SAP Level 1 support is pretty useless so I would like to check here to see if I can get some help.
I found a thread where another user has had the exact same problem as I have.
Problem: Exchange rate in Update rules with DELTA mode
However, there was no answer given to him. So, if anyone can help, I appreciate it. Here's the problem:
When a record comes through 2LIS_13_VDITM (for example), it had a document currency of EUR, a local currency of PLN and a statistical currency of USD. The first time the record comes through, it comes through just fine. The exchange rate from EUR to PLN is 3.533. The statistical currency value is calculated by taking the document currency value and multiplying it by the exchange rate from EUR to PLN to get the local currency. Then, this local currency is converted to USD by multiplying itself by the PLN to USD exchange rate of 1.519.
These are the exchange rates that are coming through as key figures on the transaction data. The problem is when a delta occurs. The data goes into the ODS and then once the update rules to the cube get it, the signs are backwards on the exchange rates. This makes sense so that the exchange rate key figures will cancel themselves out, but the SAP code says to calculate the local currency, it must first take the document currency and divide by the exchange rate. It should still be multiplying because the exchange rate from EUR to PLN is still 3.533. The negative on the key figure that is being zeroed out tells the code to divide though.
You cannot simply set the reversal indicator because the values that do come through ok would then be erraneous as the previous poster who had the same issue encountered. This is really causing some bad data for us. This is SAP delivered code. Any help would be appreciated.
Thanks,
Brent

hi,
chk out various application currency conversion links
Need Urgent Help on Currency Conversion Routine
Currency conversion using transformation rule
http://help.sap.com/saphelp_nw04/helpdata/en/bc/058f4073b2f30ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/16/088f4073b2f30ee10000000a155106/frameset.htm
Ramesh

Currency Conversion Error from KRW to EUR in for March 2011

Hi,
We are facing problem in Currency conversion from KRW to EUR in BW Production.
The report shows proper value for JAN, FEB 2011, but when we execute the report for March2011 it shows wrong value.
Month               |   BW Production Value    |           BW TEST Value
Jan2011 u2013        |   102,459                         |              102,459
Feb2011 u2013        |   120,008                         |              120,008
March2011 u2013    |   12,056,385                    |              120,564
As we can see the value for BW Production for the month of March is 2 decimals higher than the value in BW test.
Regards,
Nix
Edited by: nix_mania on Apr 18, 2011 4:20 PM

Hi,
My problem here is that the values for JAN and FEB are correct with their decimal values but only for March it is 2 decimals higher.
Hence the TCURX table wonu2019t come into picture, since if TCURX entry was incorrect then it should show wrong values for JAN and FEB also.
When I checked the data in cubes for BW Test and Production the values for March are same still in the report I am getting the difference.
Report Output:-
March2011:-
BW Test                    12,056,385
BW Production          120,564
Feb 2011:-
BW Test                    120,008
BW Production          120,008
Jan2011:-
BW Test                    102,459
BW Production          102,459
Regards,
Nix

Currency Conversion Error

In one of my report for Foreign Currency Conversion I am using the FM 'CONVERT_TO_LOCAL_CURRENCY'
The foreign Currency value is 19,120 but in debugging it is shown as 191.20 but finally displaying in the output as 19,120.
After converting, Local currency calculated is shown as 47397 in debugging whereas it should be 473.97 and is displayed in the output as 474.
Please suggest any possible solution to avoid the rounding of the last digits.

Hi marina,
in this FM 'CONVERT_TO_LOCAL_CURRENCY' is correct . in your case you have :
CLIENT
DATE
FOREIGN_AMOUNT
FOREIGN_CURRENCY
LOCAL_CURRENCY
RATE
TYPE_OF_RATE
READ_TCURR
as import parmaters.
Type of rate M=Average rate G=Bank buying rate B=bank selling rate rate.
check the long text inside the function module -> import parameters.. then set the value accoriding to that.
regards,
safel
In one of my report for Foreign Currency Conversion I am using the FM 'CONVERT_TO_LOCAL_CURRENCY'
The foreign Currency value is 19,120 but in debugging it is shown as 191.20 but finally displaying in the output as 19,120.
After converting, Local currency calculated is shown as 47397 in debugging whereas it should be 473.97 and is displayed in the output as 474.
Please suggest any possible solution to avoid the rounding of the last digits.

0Orgunit(hierarchy) and authorization object display getcell error in Webi

Hello,
         We are facing with GetCellData error in WebI to SAP BEx Query.
         This works perfectly fine in Bex for a particular test user who has access to particular org unit value.
         But in Webi we are getting this Getcelldata error.
        Tried all the options and message as recommended in sdn group.
        mdxtest returns no value.
        looked at all below messages but no luck.
GetCellData error in WebI to SAP BEx Query
Re: SAP BO WebI Report on top of BI Bex Query with Authorization Variable
in the rsecadmin, we get the same error like mentioned in below message
Hierarchy Authorization doesn't work for MDX but works for BEx Query.
Is any authorization required for this user to execute and view the authorized values in Webi?
or we have to assign any authorization ?(0BI_ALL is not assigned).
Please find below screenshots of BEx query auth log or Webi auth log (differences)
Bex auth log:
The Following Attributes Are Authorized and Thus Are Visible
0BBPPURGRPX
0BBPPURORGX
0BBP_BUYID
0BBP_ISCOMP
0BUS_AREA
0COMP_CODE
0CO_MST_AR
0CRMSALGRPX
0CRMSALOFFX
0CRMSALORGX
0CRMSRVTGRP
0CRM_SALGRP
0CRM_SALOFF
0CRM_SALORG
0CRM_SRVORG
0LEAVERS
0LOGSYS
0MAST_CCTR
0PERS_AREA
0PERS_SAREA
0PLANT
0PURCH_ORG
0PUR_GROUP
0SALESORG
0SALES_GRP
0SALES_OFF
This above log is missing for mdxtest auth log.
Is this the issue?
Any quick reponse or help really appreciated.
Regards,
Ravi
Edited by: Ravi Gadicherla on Feb 28, 2010 5:36 PM

Hi,
    Here is the log of MDXtest:
Buffering the Authorization Data
Buffering for InfoProvider 0PA_C01 and Users HRTEST93
InfoObject Properties Defined
Reading of Directly Assigned Authorizations
Direct Assignment Does Not Include Universal Authorization 0BI_ALL
Reading the Indirect Assignments with Authorization Object S_RS_AUTH
Does user have OBI_ALL?
No, the User Does Not Have Universal Authorizion 0BI_ALL
Negative Entry in SU53 Result of Failed Check for 0BI_ALL
Indirect assignments found; no universal authorization
Regards,
Ravikanth

Add extra Business Objects to model CRM 2007: Web Client Records

Hello,
Could anyone tell me how I can add more Reference Objects in Case Management?
I copied the model CRM 2007: Web Client Records and added a new node (with for example Business Object Service Order) just like product and installations (which are visible under the reference objects)
I created a new element type under SCMG_SP_CASE_RECORD --> Z_CRM_SPS_CASE_RECORD and in the customizing we attached the model to the case type under Case Management --> Extended Customizing --> Process Actions --> Assign Action Profile to Case Type.
Still the new Business Object in the model isn't visible under Case Management in de WebUI.
Could anyone tell me if I'm missing something or is there a config guide available how to add more business objects?
Looking forward to your replies.
Kind regards,
Joost Christenhusz

Eddie,
Are you familiar with Access Control Engine (ACE)?
Go through this -> http://help.sap.com/saphelp_crm50/helpdata/en/04/0177f9bb67ac4cafb84bb4d4c1d8fc/content.htm.
and https://websmp205.sap-ag.de/~sapdownload/011000358700002121742006E.
Authorizations in CRM are controlled through ACE.
Hope this helps.
Amar.

Currency Conversion Error in Report

Hello Forum,
I got an error while executing a report, where
the demo Key Figure NET VAL IN STST CUR(0D_NETVAL_S) IS restricted to the Characteristic value Current Version of the demo object Version(0D_VERSION).
The field is showing no values and the error message is
'NO VALID SOURCE CURRENCY IS SPECIFIED FOR CURRENCY TRANSLATION
0HRFIXCUR'
Could you please help me with step by step solution to resolve this issue?
Thank you,
raj

hELLO Parvahi,
Did you check OB08 in backend if maintained properly? also check validity...
also on the SRM side is below report run using SA38?
Update exchange rate tables in component system :BBP_GET_EXRATE
Hope that helps
Arshad
Edited by: arshad ahmed on Feb 9, 2010 12:06 PM

Bex to Business Objects - Currency Conversion error in Webi

Similar Messages

Maybe you are looking for