BEx: V 3.5: Structures: Duplication of data when structure is used.

Good day
I have searched SDN already, but could not find an anser for my issue.
I have created a Structure in columns which include the characteristic "Model Key" as follows:
BUS = Model Keys (BUS and CVLA)
FUSO = Model Keys (MCTR and MFUS)
In the query results the user would like to see the key figure results per the structure = BUS and FUSO, but still wants to see the detail of the characteristic "Model Key". Thus the results should be:
STRUCTURE:   MODEL KEY:   Keyfigure 1:   
BUS             :    BUS            :    20
BUS             :   CVLA           :     1
FUSO           :    MCTR          :     10
FUSO            :   MFUS          :      4
But what the query is returning is:
STRUCTURE:   MODEL KEY:   Keyfigure 1: 
BUS             :    BUS            :    20
BUS             :   CVLA           :     1
BUS              :   MCTR          :    
BUS               :  MFUS          :
FUSO           :    MCTR          :     10
FUSO            :   MFUS          :      4
FUSO            :    BUS           :    
FUSO            :    CVLA         :  
Why is it returning the extra lines (line 3,4 and 7 and 8)?
Thanks for your time.
Have a nice day
Cj

That is the standard operation with structures. If you have a structure and add a drill down by a characterisitic, all values are displayed.

Similar Messages

  • Phone is using data when not in use. How do I make it stop?

    My iPhone 4S is using data when not in use. Any thoughts on how to make it stop?

    Hello Oakleymp
    You could always turn off cellular data in Settings to get it to stop using data while it is on standby. Another option to troubleshoot the issues is to reset all settings, go to Settings > General >Reset > Reset All Settings.
    iOS: About the Cellular Data setting
    http://support.apple.com/kb/HT4203
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • IPhone using extremely high amounts of data when not in use

    I have a 4S on AT&T and am grandfathered in w/ the unlimited data plan. Last month I got the notification that I was in the top 5% of data users (which sounds crazy to me considering what some other people I've read about seem to use). According to AT&T's site I had used 2.09 GB with 16 days left in my billing cycle.
    Once I got that notification I logged on to see if I could find out when I was using such large amounts of data. It turns out between midnight and 1 am almost every night there was large amounts of data sent. I think this is strange since for two reasons, 1) I'm on WiFi at home in my apartment and 2) I wasn't even awake at the times these charges occurred.
    Example: January 6, 2012 at 12:40 am I was charged for 417,327kb, roughly 417MB.
    Similar data usage occurred almost every night going back to 12/28/11. On 12/29 I was charged for 468MB at 12:21am. Very unlikely this was actually data I used since I had work the next day and wasn't awake. It honestly looks like 80-85% of my data usage is coming from these occurrences. It also isn't likely that this is a total of data used throughout the day as there are other entries of smaller amounts spread out throughout the day.
    Now, if I was on a truly unlimited plan and there was no such thing as throttling I really wouldn't care about this. But the fact is that my 3G speeds are being throttled (just ran speed test at a location I used to get over 1Mbps and I am was at .07 Mbps). I have spoken to AT&T and they insisted it was an issue w/ my phone, either the hardware or the OS. So I went to apple and the "Genius" did a DFU restore for me in store and told me that would fix it. It hasn't and now I'm stuck with this constantly happening and unbearably slow 3G data speeds for the rest of the month.
    That was my last billing cycle where I was throttled down to download speeds of .07mbps. Unusable. This month I decided to closely monitor my data usage. I turned off iCloud and photostream, and turn off data whenever I'm using wifi. I turned off the sending info to apple setting.
    I checked my account on ATT.com today and noticed that yesterday morning at 7:58 am while driving to work I somehow used 247 MB. Don't ask me how, I'm not steaming anything and my phone is either locked or playing music from the iPod app. I could probably stream Netflix for 5 hours and not use that much data.
    I called AT&T to let them know (AGAIN) and got bumped up to a "Data manager" who was incredibly b*tchy and rude. She said there must be some app that's using that much data to update. I don't have any apps that are even that size so I don't see how this could possibly be the case. I tried to talk with her about how that can't really be the case and she just kept repeating that there must be some app using the data blah blah. I've gone to apple with this last month after failing with AT&T and at first they did a DFU restore and we restored the phone as new, then it kept happening so I went back they replaced my phone. AT&T said it must be a hardware or software issue last month, but this month it must be an app that's doing this. I can't get a straight answer from them and they just keep passing the ball to say it's Apple's problem.
    I really don't know what to do. I'm grandfathered in on the unlimited plan and don't really want to change that. Say I change my plan to the 3GB's at the same $30/month. What's to say this won't keep happening and I'll be over that 3GB's in 10 days then get charged an extra $10 for each additional GB?!
    I can't think of any apps I've downloaded in the past few months that would result in this change and I can't live with another 2/3 of my billing cycle being throttled down to unusable speeds.
    Has anybody else had anything similar happen? I have no idea what to do next (and sorry for the long rant but I'm fresh off the phone with AT&T and I'm ******)

    Thanks for the link. I only went through the last three pages and unfortunately it looks like there is no solution. I turn data off every night and turn it on only when I'm not in a wifi area. It seems that as soon as I turn it on, within an hour it charges me data for a backlog of whatever it didn't do when it was connected to wifi.
    I think it's absolutely disgusting that AT&T can just dismiss this and act like it's the users fault. Apps and email updating in the middle of the night to the tune of 400MB? I highly doubt it and then when I called to ask them about it they try to make me sound stupid like I have an app or two open. Just really ticked me off. The worst part about it is that there doesn't appear to be anything I can do about it aside from never using my data.

  • Bex Property of Info object doesn't work when Infoset is Used

    Hi,
      When I use Business partner info object ( example 0CRM_SALESP or 0BP_ACTIVIT etc) in a query build directly on a ODS(DSO)  or infocube, the Bex setting "Query Def Filter Value Selection = Only Values in Info provider" defined in the 'Business Explorer" tab of the infoobject, works perfectly. This means that if the info object has 1 Million records in the master data table, but in the transaction data only 100 are involved, when you define a varialble restriction for the info object , in the selection screen the F4 will only show these 100 data as help.
      Although this feature works fine when the query is directly developed ON THE INFO PROVIDER. However when I define a infoset on the same ODS and define  a similar query, the F4 value shows all the data from the master data table instead of the ocurance in the transaction data( info provider)..
      Is there any way , I can get over this issue.
      Thanks
    Arunava

    Hi,
      I guess, I couldn't ecplain the issue properly earlier.
    What I am saying that even though I have the proper setting in the BEX tab ("Query Def Filter Value Selection = Only Values in Info provider")  for the info object , It behaves differently if the query is defined directly on ODS then on the infoset which is built on top of the ODS.
    When the query is build on the ODS the setting works fine
    However when the query is defined on the Infoset, the F4 help get the value from the info object master data.
    My question is , why this two different behaviour for the same info object? And how do I over conme this to get the same bahavious in info set as of the ODS.
    Thanks
    Arunava

  • What exactly is using data and how can i keep it from using data when im not using my phone?

    So i have an iphone 4 and i have used a lot of data this month(like almost 2GB) and i have barely touched my phone outside of wifi areas. I always shut down any apps that use data like youtube, funnypics, facebook, etc. but i do play some games during my breaks at work but they dont require data to play so to my knowledge those games arent using data(or are they?) i just need some help figuring out exactly what on my phone is using data all the time so i can turn it off. Is it icloud? Emails on auto update? Offline game apps(minecraft, sonic dash, the Mr. Series games?) Do all apps use data regardless? Somebody please answer me. And No im not buying a bigger data plan. 2GB is my limit but it seems as though i am hitting that easily with my iphone but the rest of my familyis usually miles away from 2GB and they all have Samsung Galaxy S4s.

    My first stop would be in Settings > Cellular if you are on iOS 7.  This has a lot of goodstuff. you can turn off cellular data as a who, see your current usage and even see which apps have used data and how much.  You can even turn off individual apps form using cellular data (restricting them to wifi only).
    I hope this helps!

  • Does the AppleTV download data when not in use?

    Im stuck with a throttled satellite connection. 7.5GB over 30 days. Ive never come close to hitting it.
    Something on the LAN seems to be sucking down data regularly and I can't pinpoint it.
    Could it be the AppleTV?
    I use it very rarely and only to airplay from other computers in the house, never to stream from internet.
    I see its light come on regularly for a short period.
    Is it downloading updates, data, content etc. during those times?

    Basically it is just network talking to each other.. not internet.
    But the best way is leave the TC plugged in and check your usage overnight.. most of the traffic will be internal network. Some ISP have slow meters and reporting so it could be best to track it over a few days.
    Make sure your wireless is secured.. that is far more important issue than worrying about traffic via the router.

  • Missing EXIF data when PRINTING jpeg using Print or Slideshow Module (LR2)

    Folks,
    Is there a way to have LR2 include EXIF information when you create a JPG via the Print or Slideshow Module? The EXIF data is present if I export via the Library Module.
    However, if I "print" a jpeg either under the Slideshow or Print Module, most of the EXIF data particularly the camera info is missing.
    Thanks for your help.
    Jg

    Thanks Bob. I believe I have tried that...when you print to jpeg you have option where to save and I save to same folder and then re-synchronize folder in lightroom. Then I try to synchronized metadata between the original file and the new jpeg but the camera and other exif does not transfer over. The title, caption and copyright does work but your basic info such as camera, ISO, lens, f stop and shutter speed are missing
    Regards,
    Paul

  • ICal chooses a different date when "Mon" is used instead of "Monday"...

    I just made an appointment for an eye exam at Pearle Vision. They've sent me and email in which it had the day, date and time. I selected it, on my iPhone 5 running iOS 7. It set the event on a totally wrong date, a few months difference.
    This is how the email has it typed out.
    Mon 04-07-2014 02:00 PM
    iCal set the even for July 4th, which here in the US, every eye doctor isn't working for the most part.
    I sent a few test emails with different ways of typing it out. It would appear if "Mon" was used, then it would think that the second set of numbers is the month.
    Type out Monday 04-07-2014 02:00 PM and it will set an event for April 7, 2014 at 2PM. Type out Mon 04-07-2014 02:00 PM and it'll set an event for July 4th 2014 at 2PM.
    I also tried this on my 2012 Mac Mini with 10.9.2, same results happen.
    Any thoughts?
    KOT

    Thanks. That makes sense.
    So to understand this correctly:
    To be sure to get the result I want, that is a Session Bean that keeps track of animals added to my list, I will have to used the same instance of a STATEFUL Session Bean.
    The reason why it works here with a STATELESS Session Bean is because of the pooling but I CANNOT rely on this feature as with more requests.
    Am I understund this correctly?
    Claus

  • How to set the time difference between each data when sweeping voltage using keithley 2400

    Hello friends,
    I am using the sweep vi from Keithley in the SWEEP and Acquire measurement vi.I want to measure the voltage for every step and insert a delay in between every two data, so I need some delay between each I step.
    I am a starter to use Labview, thanks so much for your answers.
    Perry
    Solved!
    Go to Solution.
    Attachments:
    Keithley 24XX Sweep and Acquire Measurements.vi ‏26 KB

    As Dennis said, if you're using the built-in sweep function, you'll have to check the manual. See Section 10-16 (That's section 10 page 16, not sections 10 though 16) of the Keithley 2400 User Manual.
    The Keithley 24xx series has a measurement speed in units called PLC (Power Line Cycles). The default speed is 1PLC, meaning a measurement is taken every 1 power line cycle, or 1/60th of a second (16.67ms). 24XX's can go from 0.01 PLC (every 0.16ms) to 10 PLC (every 166.6ms). The faster you measure, the lower precision you get.
    To set this value programmatically, the command is
    ENSe:CURRent:NPLCycles <n>
    ENSe:VOLTage:NPLCycles <n>
    depending on what you're sensing and where <n> is the number of PLCs from 0.01 to 10.
    Another factor that will determine the time between data points is the SDM cycle. These are more complicated, look at your Keithley user manual for more information. Look at Section 6 and Section 11 for more info.
    Note:
    PLC times are based on a US cycle of 60Hz.

  • Duplication of sentences when composing texts using speech-to-text

    I am using a 2013 Moto G with Android 4.4.4.  When composing some text messages using speech to text, there can be a duplication of sentences.  IOW, I will dictate one sentence and the text will show that sentence printed twice.  It usually happens for messages that are several sentences in length.  Is there a way to replace/repair the stock messaging app?
    >> Subject edited for brevity <<
    Message was edited by: Verizon Moderator

    Thank you for your response, Christina.  This started a few weeks ago.  I
    was experimenting (yes, I know that can be dangerous with different
    messaging apps, like Hangouts and also Viber, but finally decided to go
    back to the standard messaging app that was included with my phone.  I
    believe that is when the difficulties started.  I didn't knowingly change
    any other settings in my phone and in all other respects my phone appears
    to operate normally.  I don't see any difference in this problem if I am
    indoors or outdoors.  Just this morning I was sitting in front of my desk
    where my modem and router is located and got the same duplication in a text
    message I sent.  I may have mentioned in my original message that my texts
    will also frequently drop the last word in a sentence.  It didn't do that
    this morning, however.  This problem seems to be totally random, as about
    25% of texts (and I always dictate my texts) are printed on the phone's
    screen and sent normally.  I have also sent a message to Google, but have
    had no response yet.  Thank you for trying to help.
    Personal information removed as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

  • Structure data in the spreadsheet using BEx Query filtered by year

    Hi,
    I´m making a Balanced Scoredcard using Xcelsius and extracting data from SAP BI.   The customer asked to see a few KPI´S (Return on assets and profit margin) filtering data from the dashboard by year,  month and region.
    The problem I´m facing is how to structure the data in the spreadsheet using a query filtered by year variable. 
    Regards,
    Diego

    Hi,
    I´m making a Balanced Scoredcard using Xcelsius and extracting data from SAP BI.   The customer asked to see a few KPI´S (Return on assets and profit margin) filtering data from the dashboard by year,  month and region.
    The problem I´m facing is how to structure the data in the spreadsheet using a query filtered by year variable. 
    Regards,
    Diego

  • Duplication of data in BI, with 0FI_GL_10" which has a AIED delta process.

    Hi,
    I need some help!!
    In my actual proyect, we are using DS "0FI_GL_10", which has a AIED delta process. Someone knows, if this configuration could carry on any type of extraction problem, such as a duplication of data in BI? This is what it is happening in my proyect. In the inic of "0FI_GL_10", I extract "one" record, and after a few days when I run a delta extraction, I have a new same record in the PSA, (with the same key fileds and attributes than the other). Also, in my tranformation rule, that link my PSA with a DSO, the key figure 0SALE is parameterized as summation in the aggregation, this is wrong and or i have to use a overwrite aggregation? or my problem is in the type on process delta that has the extractor "0FI_GL_10"?
    Thanks in advance for any kind of help.
    Regards,
    Juan Manuel

    Hi
    There are chances that this datasource might send in the same records when run in delta mode and that is the reason a DSO is needed with overwrite mode in between.
    Also there are a couple of notes stating problems related to this datasource.
    Note 1002272,1153944, 1127034
    Refer this if you are having specific issues with this datasource
    Hope this helps
    Gaurav

  • Report on BEx query with 2 structures (one in rows and one in columns)

    Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
    Ok, I found samr problem in another thread. Sorry.
    Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

    Hey Flora,
    Happy to hear that its working now.
    Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
    You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
    I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
    or
    If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
    Hope this helps in clear, please revert me for any clarification.

  • Which data structure to use in this scenario? queue, stack, list, ...

    Hi,
    I'm hesitant about what data structure to use (best efficient one) in the following scenario
    At a given moment I have an ordered set of data such as:
         (1,3,6,9,10)
    and a current value (by instance, 11)
    Then I need to access the LAST one (10) and
    If my value is greater I will add it to the list. In this example I will add 11 so the list will be (1,3,6,9,10,11)
    On the other hand, as a second step, I will iterate on the list as follows: I will get the first element, do something, then remove it, and go to next one until the list is empty. Therefore, basically I will access always the first element on the list.
    I don't really care about the elements in the middle.
    Which data structure do you suggest me to use?
    I was thinking on Queue (easy to access the head, and extract one by one in order), but I don't know how to get the tail element (10 in this case), as it is the one that tells me if I have to add another element...
    Thank you.

    >
    At a given moment I have an ordered set of data such as:
         (1,3,6,9,10)
    and a current value (by instance, 11)
    Then I need to access the LAST one (10) and
    If my value is greater I will add it to the list. In this example I will add 11 so the list will be (1,3,6,9,10,11)Any data structure will do, I would suggest a LinkedList.
    On the other hand, as a second step, I will iterate on the list as follows: I will get the first element, do something, then remove it, and go to next one until the list is empty. Therefore, basically I will access always the first element on the list.Use an iterator and the corresponding remove methods.
    Mel

  • How to find Where does Data Elements and structures are used ?

    Hi everyone .
    Is there any table which stores data elements/structures and where they are used ?
    If not is there any way to find by writing some <b>program</b> where does a data element or a structure is used ? Which tables will require for that ? If any one can give example it will be most helpful .
    Thanks and Regards,
    Kaushal N. Shah

    Hi Kaushal,
    DD04L stores the data elements.
    DD02L stores the structures.
    So you can query these tables & find them.
    Regards,
    Chetan.
    PS:Reward points if this helps.

Maybe you are looking for