BEx variables restricted value not shown

Hello,
I have 2 variables defined and used in a query. I put both these characteristics as global filters.
When the query is run, a popup screen allows user to input these 2 variable values.
The navigation block in the worksheet shows only 1 of the 2 variables values entered by the user. That is, only the restricted value for one variable is shown. The other is not shown. The result is, however, correct.
Not sure why is it so. Hope to get some clues.
Thanks.
Regards,
Mirella Russo

Dear AVR,
Thanks for the reply.
I placed the period and year infoobjects restricted by their respective variables in the free characteristics area but still the filtered values are not showing, although the period and year characteristics for filtering are shown as normal in the navigation block.
I have several other reports also using the same period and year variables in free char or global filter section without such 'anomaly'.
I noted that this problem report has columns restricted also by period and year variables. In fact, the year variable is an offset of -1. Is the problem caused by this restriction?
I tried creating a new query of the same design. The problem is replicated.
I hope you can throw me some more clues.
Appreciate it very much.
Thank you.
Best regards,
Mirella Russo

Similar Messages

  • BEx variable 0FPER could not be evaluated

    Hi,
    I am using BW ver 3.1, For one of the infopackage which uses OLAP variable in selection  gives the error message for Fiscal period.
    "BEx variable 0FPER could not be evaluated - No error message."
    one way for this problem is using 0P_PRFP1 instead of 0FPER. 
    Does anybody have come across this error anytime?
    Early response appreciated.
    Thanks
    Ganesh

    hi Ganesh,
    I faced the same issue, I could not install variable 0FPER from BI Content. Could you tell me how to fix ur issue?
    Thank you!

  • Display non changeable Variables / restricted values on variables Screen

    Dear SAP-Experts,
    is it possible to display non changeable / restricted char values on the variables screen?
    regards
    Jürgen

    Dear Jürgen,
    Now I understand what you mean.
    I'm afraid this is indeed not possible, unless you create customer exit for i_step=3 to invalidate any change made by user in variable screen for this variable, which is not really a practical way.
    Actually the user would be able to see the filter information after query execution. The detailed location depends on whether you use BEx Analyzer or portal.
    Regards,
    Patricia

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • Stock for 0STOCKTYPE value # not shown

    Hi experts,
    I've got a little problem with showing stock with dimension stocktype.
    I've created a query with the free dimension stocktype. When adding this to the rows all stocktypes but the empty ('#') are shown. The total shows the value including '#' data:
                                            Stock (Value)
         Plant      Stock Type                          EUR
         1101     Frei verwendbar               -25.190.984,26
                 Gesperrt                 7.423.054,97
                 Kundenkonsi frei ver          -181.952,48
                 Transit                    34.243.952,30
         Total                                  23.680.941,04
    Does anybody has an idea why # ist not shown?
    Kindest,
    Ralf

    Hi,
    Enable the Key and Text type for stock type and check if you get any values. Doesn't seem like you have given any restriction otherwise total will not addup.
    Still you can check if you have put any global filter or any specific filter to Stock type if it is RKF?
    Regards,
    Durgesh.

  • Shared Variable Initial value not licenced error with cRIO

    Hello Everyone,
    I've a project that will be deploed on cRIO. This project was created on a different machine and didn't have any error regarding the shared variables. when I transfered the project to the computer connected to the cRIO, I have this error with all shared variable. The error message says that:
    1. Initial Values: Not Licenced or can't be edited outside of LabVIEW.
    2. Logging: Not Licenced or can't be edited outside of LabVIEW.
    attached are two images for the error i have.
    Can I have help with this issue?
    Thanks in advance
    Attachments:
    1.png ‏134 KB
    2.png ‏142 KB

    Good day,
    Sounds like you are using the DSC module features on your code and you forgot to activate the runtime system on that machine. If you have access to the NI License Manager, please check the status of the license.
    We need an active license for the second message but, for the first one you can try to program your own initial values for all of your network-published shared variables by initializing whenever the PC is started. During the initialization portion of your code, you can just write a constant value to the shared variables so the values are the same initial values every time it is run.
    Regards,
    Alejandro | Academic Program Engineer | National Instruments

  • Depreciation value not shown under the tab 'posted value' in AW01N

    Dear experts
    I have in chart of depreciation US GAAP book(posted to G/L), local GAAP book(not posted), book to post difference of two GAAP(posted to G/L), and local tax book.
    In AW01N, the ordinary depreciation value is shown correctly for all books in the first tab 'planned values',
    But on the second tab 'posted values', depreciation value only shown for the US GAAP book.
    I'm thinking it maybe relavant with posting to G/L or not, that means only book with posting to G/L is shown with deprecation value on the second tab.
    But something strange is in another chart of deprecation, deprecation value is shown for US book, local book.
    Could someone comment how to control deprecation value shown or not on the second tab by local book?
    Best Regards,
    Nicole

    Hi,
    If you would have mentioned it as a "area post in real time" it will show you in the aw01n. If not, it will not show. Because, the tab specifies the posted values which means how much depreciation posted to GL.
    As you have put "area doesnot post" for the local book, it will not show the balance.
    Thanks,
    sravankumar

  • BEx Variable default value does not pass thru to Webi report

    Hi,
    It appears that the integration between BEx and BOBJ Webi does not support default values when the webi report is scheduled.  This means that if Webi/Infoview is the delivery method, than clients require 2 reports.  1 for adhoc and 1 for scheduling.  Is there another way around this so 2 reports are not required?  See SAP Knowledge Base Article  https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136363534393826
    Regards,
    Dae Jin

    Hi,
    Yes it is not supported. you can achieve by writing customer exit for this.
    in istep 2,
    check whether the variable value is intial.
    if intial
    pass default value
    if not intial (else)
    dont do any change, just pass the user input to restriction.
    -Sriram

  • BI 7 list of variable values not shown in chagne variable values option.

    Hi,
    In BI7 queries i face a problem like the first time you execute a query it asks for selection options ,then the next time if we want to change the variables we have a option "change variable values" in the menu bar to change it,but unlike BW 3.5 it is not showing the entire list of values it shows only the history or the present values we choose,this restricts from selecting any desired values from the list.
    Is there any way to resolve this problem,your suggestions will be really helpful.
    Thanks,
    G.Monica Roja Flora.

    After you click on the box in the variable selection screen you will get another window "Select Values for XXXX". In the first box you will have a drop down box which will show "History", Favorites", "Single Values" & "Value rabges". Then in the bottom right there is a button "More" when you click on it it will open to show the selections already made.
    Hope this helps.
    Bhargava

  • Optional variables within report  not shown on portal

    Hello,
    I have got following phenomenon:
    I created a report with the Report Designer. This report contains different queries that all use the same optional variable. Our first tries showed the selection screen for this variable within the portal.
    After we changed the technical name and the description and published it into portal again the selection for the optioanl variable isn't shown anymore.
    It's no general problem because on queries for example the optional variables are shown.
    Has anybody an idea what could be the problem and how we can solve it?
    Greetings & thanks
    Bettina

    Hello,
    if I execute the report within the Report Designer there occurs a drop down menu on the variable screen "Available variants:" with on item "Report with variable".
    I can save this variant - but it's not possible to choose this special variant for publishing into portal (ok, maybe it works but my first tries didn't work). Do you have an idea how this setting can be used in portal??
    Greetings & thanks
    Bettina

  • BEx variable input value

    Hi,
    I have created a BEx Query, now based on selection screen inputs.
    Selection Screen Inputs:
    MATNR -
    PLANT-
    SLEVEL-(User Input Value) Mandatory
    Now when i select inputs at the time of running query eg;
    MATNR - 'ABC'
    PLANT-'A123'
    SLEVEL-'0.55' (User Input Value)
    Now my report should look like this.
    MATNR | PLANT | SLEVEL
    ABC       A123      0.55
    ABC       A123      0.55
    Here SLEVEL value shld be user input value. How to achive this?

    Hi,
    Using Formula varible and Boolean expression concept you  can get it.
    1) Define a formula varible with user entry.
    2) USe the varaible in the expression ,for ex:
    FV2 = (fORMULAVARIABLE == SLEVEL ) * SLEVEL
    3) PUT CONDITION on FV2 not equal to 0.
    OR
    Simply use Condition Varaible.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma

  • Sapscript Passing parameter value not shown.

    Hi all,
    I am writing a sapscript form to call a subrountine by passing the hardcode parameter 'ZXX_TSI_SHIPMENTS_FROM' shown as below: -
    PERFORM GET_STANDARD_TEXT IN PROGRAM ZPXX_SHIP_INST
    USING 'ZXX_TSI_SHIPMENTS_FROM'
    CHANGING &ZXX_TSI_SHIPMENTS_FROM&
    ENDPERFORM
    My problem now is when I debugged in program ZPXX_SHIP_INST, the passing parameter is empty.
    Could someone help me?
    Thanks in advance.

    Hi.
    In program  ZPXX_SHIP_INST write like this.
    FORM GET_STANDARD_TEXT TABLES in_tab STRUCTURE itcsy
                                                              out_tab STRUCTURE itcsy.
    READ TABLE in_tab WITH KEY name = 'INVAR_1'
      IF sy-subrc = c_zero.          "check for subrc
        lv_ebeln = in_tab-value.
      ENDIF.
    CALL FUNCTION 'READ_TEXT'
        EXPORTING
          client                  = sy-mandt
          id                      = p_lc_f01
          language                = sy-langu
          name                    = p_lv_ebeln
          object                  = text-t28        "EKKO
        TABLES
          lines                   = it_tline
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc <> c_zero.        "checking for subrc
        "to avoid epc error
      ENDIF.                        "IF sy-subrc <> c_zero
    in it_tline[] u can get the text.
    cocatenate this text into one variable and pass this to script.

  • Values not shown in F4IF_INT_TAB_VALUE_REQUEST

    Hi All
    I want to show the user the values from my itab at event at selection-screen on value-request on f1.I am passing following parameter to the FM
    retfield , value_org ('S')
    and tables
    value_tab , return_tab.
    Now the problem is though the itab passed i.e. value_tab is not empty, it is not showing the values just it is getting poped up thats all ?
    Any clues ??
    Thanks in anticipation
    pM

    Hi,
    See this code
    REPORT Z.
    data: begin of inttab occurs 10,
              bukrs like t001-bukrs,
              butxt like t001-butxt,
              ort01 like t001-ort01,
          end of inttab,
          ret_tab like DDSHRETVAL occurs 0 with header line.
    start-of-selection.
      select bukrs butxt ort01 from t001 into table inttab.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
        DDIC_STRUCTURE         = ' '
          RETFIELD               = 'BUKRS'
        PVALKEY                = ' '
        DYNPPROG               = ' '
        DYNPNR                 = ' '
        DYNPROFIELD            = ' '
        STEPL                  = 0
          WINDOW_TITLE           = 'Select Company Code'
          VALUE                  = 'S*'
          VALUE_ORG              = 'S'
        MULTIPLE_CHOICE        = ' '
        DISPLAY                = ' '
        CALLBACK_PROGRAM       = ' '
        CALLBACK_FORM          = ' '
        TABLES
          VALUE_TAB              = inttab
        FIELD_TAB              =
          RETURN_TAB             = ret_tab
        DYNPFLD_MAPPING        =
        EXCEPTIONS
          PARAMETER_ERROR        = 1
          NO_VALUES_FOUND        = 2
          OTHERS                 = 3.
      IF SY-SUBRC <> 0.
        write: / 'Error =', sy-subrc.
      else.
        loop at ret_tab.
          write ret_tab-fieldval.
        endloop.
      ENDIF.
    end of code
    Thanks & Reagrds,
    Judith.

  • SED and ECS value not shown in capture excise invoice

    Dear All,
    During  MIGO,  in the excise Invoice tab, the value for SED and ECS remain blank after capturing the Excise invoice. all the relevant conditions are maintained. what must be missing? please guide.
    Regards,
    Jay

    Hi,
    Her you need to check few settings 
    1.SPRO->Img ->Logistics - General->Tax on Goods Movements->India ->Basic Settings -> Maintain Excise Registrations
    here make sure you have activated SED for your Excise registration
    2.You have maintained  excise defaults in
    SPRO->Img ->Logistics - General->Tax on Goods Movements->India ->Basic Settings ->Determination of Excise Duty ->Maintain Excise Defaults
    here maintain all entries for SED condition(JSOP)) ,SED set off(JSX1) same for Ecess for your tax procedure
    3. Finally you have maintained A/P Set Off conditions for those SED (like JSX1) and for ECS set off in PO with 100%

  • Bex Variables Varinats values changed

    Hi All,
    I have a variable used in the query which is on the charecteristics source system(X). And we have lots of variants created on this query for this variable. Now I will be using another new char(Y) source system and will be creating a new variable on this.So if we replace the old char and add the new char in the report the variants are going to break.
    Please let us know how can we fix those variants
    Regards
    Mona

    Hi,
    First regenrate your query in RSRT.
    Check if is there any authorization check for that object.
    You may refer following document fopr appropriate F4 help settings.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d
    I hope it will help.
    Thanks,
    S

Maybe you are looking for