BI 7.0: Issue with Hierarchy for infoObject OPROD_HIER

Hi Gurus,
I have activated the Hierarchy datasource 0PROD_HIER_LPRH_HIER in ECC, tested with transaction RSA3 (456 node IDs) and replicated to BW.
In BW, the datasource has been assigned to the infosource OPROD_HIER ;
when I have created the infopachage, there is no Hierarchy available to select !!!!!!!!!
Please can you help with any solution : note, .....
Thanks in adavnce

Hi Mr V
I have clicked on "available Hierarchies from OLTP", but nothing appears above.
I don't understand what is wrong
Please an help is needed .....
Thanks
Edited by: Firmin Kouassi on Jul 26, 2009 9:24 AM

Similar Messages

Error when charging hierarchy for infoObject hieracky for 0MATERIAL

Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
[http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
[http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
[http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
Any Idea? Thank-you!
Artur.
Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
I hope this helps
Regards

Issues with nested for loops - saving images from a camera

Hi all,
I've written a vi. to capture a specific number of images ('Image No') and save these images, outputted to a folder of my choice. Each image is identified sequentially. However, I wish to do a number of iterations ('Run') of this capture sequence, such that the filename of each image would be 'Filename (Run)_(Image No).png', e.g. run 5, image 10 would be 'Filename 5_10.png'. I have tried a nested for loop for this but I receive an error 'Asynchronous I/O operation in progress' (I've attached a printscreen).
Can anyone assist me in solving this problem? I preiously posted this in machine Vision but got no response (http://forums.ni.com/t5/Machine-Vision/Capturing-image-sequences-issues-with-nested-for-loops/m-p/19...). Please find attached my vi.
Kindest regards and thanks,
Miika
Solved!
Go to Solution.
Attachments:
Labview problem.jpg ‏3841 KB
Image sequence save to file.vi ‏48 KB

Miika,
the problem is not the filenam, but the name of the folder (AHHHHH!). You try to create the same folder in the outer for loop over and over again.... (it is the error message above the '======', not below )
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Issue with authorizations for BPS

Hi Experts,
There was an issue with authorizations for BPS. We have a large number of agents that need to enter plan data via a layout. In order to control the necessary authorizations, we would like to filter via something similar to a user exit using a function module in order to avoid having to define authorization objects for each of the agents who have access to the systems. Right now, we are not sure if there is user exit concept available as it is for BW variables. Any body experienced similar issue may share their experience.
Regards,
Ankit

Hi,
In BPS, you can use user specific variables or you can set up a Variable of type exit. You can also have a variable of type authorization which uses the security / authorization of the BW system.
Hope it helps...
Cheers,
Tanish

Photoshop batch production - issues with 'save for web'

Hi,
I'm having an issue with 'save for web' on a batch. I've just spent the last 2 hours searching the web and this forum and although the issue gets touched upon, the threads either suddenly head off in another direction, end, or i just struggle to make sense of the answers given.
I have 350 images that i want to resize to thumbnails and then save for web. 2 hours ago this seemed like a 5 minute job.
I creat an action called 'batch_thumbnail' and press 'Record'.
I then select 'File' > 'Open' and select an image to open using the dialog box.
I then select 'Image' > 'Image Size' and resize the image to the thumbnail size (200 x 125) and press 'OK'.
I then select 'File' > 'Save for Web and Devices', set my optimisation settings and press 'save'.
Using the dialog box that pops up, i navigate to a pre-created directory called 'thumbs' and press 'save'.
I then select 'File' > 'Close' and on the dialog box that pops up i select 'Don't Save'.
I then stop the action from recording.
So far so good.
I then select 'File' > 'Automate' > 'Batch...' and the dialog box appears.
I select my action in the 'Action' drop down menu.
In 'Source' i set the drop down menu to 'Folder', select 'Choose' and select the target directory with my 350 images in.
In 'Destination' i set the drop down menu to 'Folder', select 'Choose' and select the target directory (thumbs), where i wish to save the thumbs.
In 'File Naming' i leave the first box as 'document name', set the second to '_thumb' and have the third as 'extension'.
I then click 'OK'.
And this is where the problem begins. Everything works fine till it trys to save the second image. I can see what's happening, as the directory path and image name that are used whilst setting up the SFW part of the action, are getting hardcoded into the action. So every resulting image is being saved as the same file, instead of being overriden by the settings in 'File Naming'.
I've tried selecting 'Override action 'Save' command', but it doesn't make any difference. Is it actually possible to batch produce files using 'Save for Web and Devices'?
Cheers,
James

I have written a couple of Save For Web batch processors, they may be of use to you?
They can both resize and run an action if required.
CS2-CS3 http://www.ps-scripts.com/bb/viewtopic.php?t=2374
CS4 http://www.ps-scripts.com/bb/viewtopic.php?t=2276 (This handles metadata)

WebI issue with hierarchy display and aggregation

Trying to wrangle what looks like a defect in WebI's handling of hierarchy display and aggregation. We just completed an update cycle and are running BOBJ 4.1 SP4.
The hierarchy is a standard FM Commitment Item hierarchy in which both the nodes and leaves are Commitment Items (i.e. it uses InfoObject nodes, not text nodes). An example of one of these nodes looks like this in BW:
Cmmt_Item A - Node
    Cmmt_Item B - Leaf
    Cmmt_Item C - Leaf
Let's pretend Commitment Item A has $50 posted to it, B has $20 and C has $30. Analysis for OLAP handles this by adding a virtual leaf line to distinguish postings that are on the parent node like so:
Cmmt_Item A - Node       $100
    Cmmt_Item A - Leaf    $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
So you see both the total for the node ($100) and a line for each Commitment Items with KFs posted to them. Our users like this. They can easily see the aggregation and the breakdown.
WebI, on the other hand, will display it like this:
Cmmt_Item A - Node       $150
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
It doesn't create a separate line for the value of the parent node, but it does add it's value into the aggregate. Twice. Modifying the table with the 'avoid duplicate row aggregation' checkbox yields output like this:
Cmmt_Item A - Node       $100
Cmmt_Item A - Node        $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
We're about halfway there. While the top row now shows the correct aggregation and it creates a new line to show the distinct amount on the parent node, that new line appears on the same level as the parent. It's no longer clear that there's an aggregate and a breakdown. And attempting to expand or contract a node will now crash the report with one of those 'Error 16' messages.
Has anyone encountered this issue with hierarchies in WebI? This report was built from scratch in 4.1, so I'm not sure if this affects older versions or not. Or if it would affect any hierarchy that uses InfoObject nodes instead of text nodes.

Without a fix, the simplest workaround I can think of would be to restructure the hierarchy. It can't use postable nodes, so Cmmt_Item A - Node from my example would need to be converted into a text node and the postable characteristic added as a child on the same level as the B and C leaves.
This looks like it would affect anyone using hierarchies with postable nodes in a WebI report.
Another oddity in WebI's behavior here - even though the postable nodes show incorrect sums the sum at the root node is correct. So extending my examples from the original post:
Root Node                    $100
    Cmmt_Item A - Node       $150
        Cmmt_Item B - Leaf    $20
        Cmmt_Item C - Leaf    $30

Issue with Hierarchy selection in Filter area

Hi experts,
We have an issue with BEx query selection.
Structure of Quey
1. Filter Area
=> Characteristic Relations : Restriction condition with hierarchy
2. Rows
=> Display characteristic with hierarchy active
3.Columns
=> Formula with keyfigure using sign reverse of hierarchy (formula variance).
<symptom >
When I use context menu, "Keep filter value", with the displayed hierarchy node,
and drilldown with other characteristics, the result became wrong. Filter value I kept became inactive.
Workaround I found was like belows.
1. Remove sign reverse calculation in Formula.
2. Keep sign reverse calculation and move restriction condition with hierarchy in filter area TO default values.
I wonder this symptom was right technically or bug ocurred after version upgrade or something.
Thanks in advance.
BEx BI Addon 7.X(based on 710)/SP11 Revision 634

Hi
This depends on the logical database that the report is based on. Secondly I have experienced that the report variant overwrites the date selections and therefore it looks like that the dates are not parsed (which I think is your problem).
For e.g. logical PHP and PHPCE both the period and data dates are filled with the data selection from the portal. (check on the report attributes in SE38 which logical DB used) For e.g. PTRVP (travel) no date are passed at all in the call of the report!!
To make sure that the report variant isnu2019t overwriting I normally set the variant for the report to u201CSave field without valuesu201D for the date selection periods and then it isnu2019t filled by the variant.
Data selection period
Data selection period: Start
Data selection period: End
Employee selection period
Employee selection period: Start
Employee selection period: End
Regards,
Lars

URGENT: Issue with hierarchy level keys and report drill down

Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.

Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks

Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

Hi all,
we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
Exchange Server.
We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
Timestamp Sender Recipients MessageSubject
25.02.2015 16:48:52 [email protected].. {}
25.02.2015 17:04:43 [email protected].. {}
25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
25.02.2015 17:13:45 [email protected].. {}
25.02.2015 17:13:55 [email protected].. {}
We can still reproduce the issue on different Mac computers.
Thanks for any help in advance!
Thanks and best regards
Reto

Here is the mailheader form the successfully sent email:
Date: Wed, 25 Feb 2015 17:08:25 +0100
Subject: test 3
From: sender <[email protected]>
To: "'[email protected]'" <[email protected]>
This mailheader is from an email which was not sent out:
User-Agent: Microsoft-MacOutlook/15.6.0.150113
Date: Wed, 25 Feb 2015 16:48:52 +0100
Subject: test 1
From: sender <[email protected]>
To: [email protected] <[email protected]>
Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

Peformance issue with iSetup for loading fnd_flex_value_norm_hierarchy recs

Hi
The customer site where I am working in currently has implemented isetup to load data from Hyperion DRM to Oracle GL. They are currently on 11i.AZ.F patch level.
The customer has constantly had problems in two areas with iSetup -
1. iSetup has a limitation that all existing children records plus new ones being added have to sent in the XML file provided as input to iSetup. For eg. one parent ENTXXX might have 15000 children records i.e records in FND_FLEX_VALUE_NORM_HIERARCHY. Now when 2 children are removed from this parent in Hyperion DRM and these two records sent to Oracle iSetup for getting deleted from the parent, the current implementation stipulates that iSetup requires in the XML input file the remaining 14998 records. Thats how it knows to remove the two nodes. This is a huge performance issue.
They are looking at loading into iSetup only the two deleted nodes with an action code of DELETE and let iSetup handle this rather than having to provide the entire list of children less the removed nodes for iSetup.
2. Can we load using the final xml file directly by calling any Java class/process directly rather than going through iSetup Loader Concurrent Request?
3. Is there any documentation on how to use the isetup Java classes?
Will upgrading to 11i.AZ.H patch level solve any of the above concerns/issues?
Regards,
Richard

#1. I guess, you are referring to the problems that you are encountering while loading GL COA. You may log SR against GL to know more details on how API loads data to instance. DELETE is a specific requirement in your case and I would suggest you to work with GL team and they may provide some solution or workaround to overcome this performance issue.
#2. No, concurrent program does good amount of pre-processing that you would not get if you directly call the java classes.
#3. Not sure, what you are exactly looking at. Are you looking for user guide to write your own iSetup API classes?
11i.AZ.H has got good amount of performances fixes overall and it is recommended release on top of 11.5.10.2CU. I would suggest you to upgrade to 11i.AZ.H.
Specific to GL COA issue, I don't think 11i.AZ.H would really help you much. It is very much functional issue with respect to API and you have to work with GL team to get workaround/solution. This may involve customizing the API according to your requirement.
Thanks
Mugunthan.

BB BOLD 9700 sync issues with Outlook for MAC

Hi Support,
I hope that you can help me? I have been having issues with my BB calendar not being able to sync with my Outlook for MAC calendar. I am using BB OS 6.0, Blackberry Desktop software 2.2.0 and Mac OS X version 10.7.2.
I have been able toget around the calendars not syncing but this morning I added iCal to iCloud, stupid move as it erased my entire calendar.
i was wondering if someone could help me restore my Outlook calendar and have my BB and calendar sync properly.
Please Help!!!

Hello and welcome to the BlackBerry Support Community Forums.
The BlackBerry Desktop Software needs a local calendar for sync. It does not support the iCloud.
You will need to create a new local calendar in your iCal to continue synchronizing with the Desktop Software.
As for restoring your Outlook calendar, you will need to talk to Apple for assistance.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Issue with Hierarchy Navigator

Hi there,
we have some problem with Hierarchy Navigator (EP 3.6).
We installed and configured Hierarchy Navigator (EP 3.6) as explained in Oracle documentation.
We created a Trade Spec "A" > We run Hierarchy Nav > System shows us one only row with the Trade >> OK
We linked a Material Output "B" (External Product) and its context in Related Specs Tab > We run Hierarchy Nav > System shows us:
     1 - The message “This hierarchy has recently changed. An accurate hierarchy should be available in approximately 1 minute(s).”
     2 - Trade “A” and the linked Material “B”
     3 - Formulation does not appear
After 1 minutes System shows us the message: “An accurate hierarchy is now available, Refresh to see the latest hierarchy.”
We click on Refresh button > System shows us:
     1 - The Trade “A” only again
     2 - Neither Material nor Formulation appear
Do we missing something?
I hope my question is clear, if not please do not hesitate to contact me.
Thank you very much.
Best regards,
Stefano

Sounds like two different situations.   Here are some tips:
1. Context has to be selected with the material associated to the trade for the formulation to appear in the hierarchy navigator.
2. In your last example, it sounds like a change was made to the hierarchy. Any change to the hierarchy will cause that message. For example, if you changed a packaging spec or selected context. The system will only show one level of the hierarchy while it's being updated.   I would need more information to know of you found a bug but it is possible. Seems like the material should have appeared though.

Issues With Save For Web CS6

I'm having some issues with my file when trying to Save For Web. A band of transparency appears above my image even though I have everything cropped to the artboard, and the artboard is exactly the size I want the final image to be. If I uncheck "Clip to Artboard" the band of transparency disappears from the top, but reappears on the right side. It seems as if the artboard area is calculated differently in the Save For Web screen; its slightly off. I've included some images so you can see the issue.
Trying to save for web as a .png with "Clip To Artboard" selected; a tiny (one pixel tall?) band of transparency on the top of the image.
Trying to save for web as a .png without "Clip To Artboard" selected; the image seems to shift and the band of transparency appears on the right size. Also some of the pieces of the image appear on the bottom outside of the artboard.
I made sure to crop each element of my image to fit exactly on the artboard. Previously, I had made sure to use a clipping mask exactly the size of the artboard and still had these issues. I would like my .png to not have a band of transparency. It has the same issue when I change it to .jpg, but instead has a white matte band. What am I doing wrong, or is this just an issue with Illustrator? Thanks in advance!

Depending on your use of the image in context, won't the transparent strip "disappear?"
The only solution I know is to open it in Photoshop and manually crop out the transparent strip. AI or Save for Web also seems to antialias the edge of free-standing art over a transparent background. I just make the artwork slightly larger than the final cropped size, save for web, then crop in Photoshop.

Any compatibility issues with IE8 for STVN 2.1 Orgchart?

Hi Experts,
Just curious if there are any issues with running IE8 compatibility mode for Nakisa STVN 2.1 Orgchart?
Thanks,
Michael Dinh

Hi Michael,
IE8 Compatibility Mode is fine for use with STVN2.1 applications. As Stephen said, IE7 and IE8 are certified for SVSN3.0 but IE6 support has been discontinued.
Best regards,
Luke

HT204407 Is anyone else having issues with login for Find My Friends App?

I keep getting the error message "either login name or password is incorrect. I have reset the password but I still get the same error message. Does anyone know the fix for this? Thanks, Terry

I just got the same message myself. Which I have only had 2 times in three years, so I checked here.
http://www.apple.com/support/systemstatus/
There is an issue with the iTunes Store on Apple's end, so I assume that is why we cannot connect.

BI 7.0: Issue with Hierarchy for infoObject OPROD_HIER

Similar Messages

Maybe you are looking for