BI 7.0 NW2004S SP7 - transport connection is not collecting all

Hi ,
I am collecting all the necessary objects and trying to transport , some of the objects like datasource or transfers structure are not getting included into the transport ? Is this some kind of bug or is there a OSS note for this ?
Thanks
Hareesh

Hi,
Have you mentioned the tick mark for required Source systems in transport connector tool?
With rgds,
Anil Kumar Sharma .P

Similar Messages

Camera connection kit not seating all the way

I put my SD Card reader (part of the Camera Connection Kit) in my iPad 2 and nothing happens. I rebooted and everything. Just a bit ago I tried again and this time pushed as hard as I could on the back of the Reader to get it deeper in the iPad connection. Well, the pics popped up, but lost them again as soon as I took pressure off. The Reader has a flat surface, minus the prong, and the iPad 2 has a slope near the connection hole so basically it's not a great fit and the prong doesn't go deep enough to be recognized without ALOT of pressure. Any ideas on this? Are they coming out with a Reader that fits better? Thanks

You're right about the angle in sliding the SD connector into the iPad. Assuming you're not trying to slip it in with a case inclosing the iPad and you've pushed it in as hard as it will go, either you have a bad SD connecter or there is something wrong with the slot on the iPad. However, IF you can charge the iPad through the same slot, it would almost have to be the SD card connector.
You're not trying to use some aftermarket card connector by any chance? On other Apple devices I've seen some of these that are "just not quite right". I've seen SD card connectors for the iPad on eBay for around $5 or so. I've been thinking of buying one as a backup to my genuine Apple connector (priced at $29).

RE:Transport connection

Hi SAP Guys...
this is khaja...
can any one explain me the following one...
1.what is a Transport connection?.how do we collect the objects in Transport connection?.after collection how do keep into one request?.
Regrds.
khaja

In SE09 & SE10, under "Elements of the Query Builder" node, u can see the query names something like below, which is same as the technical name (not description) in Transport Connection..
4CXFEN58FRLEKDNDNG9AACM3I
4CXFENCWYQ74306TTABMKEKTA
In the Query Designer
tech. name : ZDZAS_MP01_Q101
Description : Number of Processes
But when comes to Transport Connection
Description : Number of Processes
tech. name : 4APUSIVVA4NN3QZK65YRJVROE
whatever tech.name in Transport Connection, that will apper in SE09 & SE10
Edited by: Mr. V on Mar 20, 2009 5:24 PM

Use an existing request in transport connection

Hello
I want to add objects into an existing transport request with transport connection.
How can i do?
Can i create a new one from transport connection but not transport it automatically? only insert objects inside it.
Thanks.

Dear Fernando Ariel Gonzalez ,
I think we can..
Please go through the steps below,
1. Go to rsa1 -> business content
2. Choose 'grouping' as "in dataflow afterwards"
3. choose 'collection mode' as "collect automatically"
4. choose 'infoproviders by infoareas' - choose appropriate infoprovider and 'insert objects for collection'
5. Select your query / queries
6.choose 'create transport request for BEx' and select appropriate development class
To Release a request....
se09/se10, 'modifiable' is marked, and 'display', cursor on you request and click truck button (release),
if request has 'child' request, need to release it first.
To delete or remove request
Goto SE03
Requets/Tasks > Unlock Objects
Give the Request num & Execute
Now Delete the Request on SE09
It is possible to rmove before transportataion from SE03. Well if you want to remove from after transportation it can happen in a case like this. While you delete the obect in dev, it should ask for a request and when that request is transported the object will get deleted in the target sys too.
For more information....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
/message/1257362#1257362 [original link is broken]
Re: How to collect & transport new cube & new update rules
Re: Transport to BWQ issue?
Re: Transport a query from BWQ to BWP
Hope it helps you,Revert me back if you have any queries
Regards
Bala

Connection to Time Capsule works not for all I-Products

Hello
Since today I have strange issues on my Home Network.
On my Ipad the connectiion is working fine with the TC, but with my Iphone 4s and Iphone 4 the connection is not working all the time. It connect from time to time but the most time it shows the message connection error.
I tried to reset the TC I reset the Iphon's, but nothing.
Do somebody know this issue?
Thanks

I have heard some interesting new info about it, but the issue is very complex. It depends on a large number of factors but latency can be an issue.
I recommend you redo the setup of the TC.
Start from a factory reset.
Use all SMB names... short, no spaces and pure alphanumeric.
That includes the TC name, wireless names.. give a different name to 5ghz and share name for hard disk.
Use WPA2 Personal security with password which matches the above.
Set wireless to manual radio channels.
Try channels 11,6,1 in that order.
But give me some more info if you still have issues.. what is the main router?
What broadband service do you use?

Post Instalation Configuration for NW2004s SP7

Hi,
I installed NW2004s SP7 and its installed sucessfully.
now if i want to connect JCos and RFCs i need to do some post installation configuration.
so please let me know what things i need to do.
i am unable to connect R3 system.
so plese let me know as soon as possible.
regards
mmukesh

Hi
See this Sample
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/f0b0e990-0201-0010-cc96-d7ecd2e51715
see this help
http://help.sap.com/saphelp_nw2004s/helpdata/en/01/43e13d82fcfb34e10000000a114084/frameset.htm
See this thread
Re: Can't get RFC connection to R/3 System
Kind Regards
Mukesh

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Using XML Import/Export in Transport Connection

Hi, I was investigating the feasibility of copying a query definition from one BW system to another using the XML Import/Export functionality in Transport Connection. This is not to replace our current transport process across the landscape (Dev -> QA -> Prod), but merely just looking at possibilities for end users who develop queries in QA & then recreate them in Prod.
My question is: has anyone worked with the XML Export/Import for types Queries & Query Elements? I was trying this out between a Dev and Sandbox system and only had limited success. I was able to take a small query and perform the Export to a local .xml file without much difficulty. But when I try to do the Import, my query never shows up. The Import function shows a green light, but I get a couple of error messages on the Import such as the following:
==========================================================
SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ () cannot be imported
Diagnosis
You attempted to import SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ of type into the system via the XMI interface. However, you are not allowed to import SAP objects.
System response
The object was ignored during the import.
Note: It can be that the import is incomplete when the required SAP objects are still not active in the system.
Procedure
Install the specified objects from Business Content. Only import the metadata afterwards.
=========================================================
The portion returned for Saving and Activating returns green lights. The two sample objects mentioned appear to just be custom InfoObjects used in my query & don't look to be any different than others that work OK.
Just curious if anyone else has worked with this and could help advise.
Thanks... Jody

This is an old subject, but I think XML import only works for datamodeling objects like InfoObjects, InfoCubes, and ODS objects. If you try to export a query, and open the XML file in a text editor, there is not enough information (in my opinion) to build the query. As an example you don't see how key figures are to be displayed, filter or free characteristics.
However, when an InfoObject is collected, you get all the attributes, texts in all languages.
If anyone has more insight, please enlighten us.
-John

Why created package with SE80 can't be found in Transport Connection?

We want to transport our custom InfoCubes from Developement environment to Test environment:
RSA1 -> Transport Connection, select an InfoCube we created and drag it over to the right frame, group it by "In Dataflow Before and Afterwards". The Package column shows it's attached to $TMP that we would have to change it to a custom package that it can be transported over. We click the Package picture icon with a pencil trying to change the package attached from $TMP to a custom one, but can't find any custom package we created with SE80 from here. Could someone tell us why?
Thanks

hey AHP,
Yeh, if I run rsdcube and follow the menu you specified, I can assign the InfoCube to the custom package I created with SE80. I wonder why it's to work in this way? If clicking the Package picture icon with pencil in Transport Connection doesn't work or successfully to bring up the correct custom package we created, then why SAP has this stupid picture icon over there to mislead our developers?
You asked me how we created the custom package, we created them with SE80.
BTW, someone says that's BASIS work to create package to do the transports in their companies, how about your company? You don't have to create custom package and just assign the objects to the package BASIS creates for you?
Also someone says the ideal transport strategy is to group by "Necessary" other than "Dataflow Before and Afterwards", how do you think?
Thanks

Unable to find the Transfer Rules in Transport Connection

Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
Tyson

Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN

RMI Protocol over JRMP transport: connection refused

I changed the look and feel for disco plus to Jinitiator. I then started getting error RMI Protocol over JRMP transport: connection refused to host: 192.168.1.1
I changed the settings back to java plugin 1.4 but I'm still getting the same error on all client machines.
I'm running windows 2003 and application server 10.1.2.0.2
Thanks for any help,
Brian

Hi Brian
When you changed to JInitiator what did you set the style to be? Also, why would you not want to use the Sun Java?
Anyhow, try getting the users to clear their local Sun Java cache, this will release the applet causing it to reload upon next connection, and try again.
If you want to retry JInitiator, try this:
1. Go to Control Panel | JInitiator 1.3.1.x or whatever version you are using
2. Navigate to the Proxies tab
3. Uncheck Use Browser Settings
4. Click the Apply button
5. Close all browser windows
6. Reconnect to Discoverer Plus
If the above steps do not help, try editing the security details of the Options menu in the Internet Explorer using this workflow:
1. On the client machine, launch IE
2. From the toolbar, select Tools | Internet Options
3. Navigate to the Security tab
4. Click on the Trusted Sites icon
5. Click on the Sites button
6. Add a fully, qualified HTTP link to your server
7. Close all browser windows
8. Reconnect to Discoverer Plus
Of the two solutions above, the first is most likely to fix your issue. However, I advise all my customers to set up the application server connections as being trusted sites.
One additional thing would be to delete your cookies. Discoverer Plus loves cookies.
Best wishes
Michael

RMI Protocol over JRMP transport: connection refused to host: 10.10.10.10

Hi,
We migrated our Discoverer 9.0.2 to 10.1.2. However, when we connected to Discoverer Plus, the message saying "RMI Protocol over JRMP transport: connection refused to host: 10.10.10.10" appeared. We use the "Default" communication protocol and Sun JVM 1.4+ is installed in the client. Do you know what's happening?
Thanks.
Andy

Hi Andy
It could be a Java incompatibility issue. On one of your client machines try removing Java altogether and then reconnecting to Discoverer Plus. The server should send down a new, clean version of the Java.
Try this and let me know how you get on
Best wishes
Michael

Trying to upload Transportation connection point

hi guys,
I am tryind to upload Transportation connection point (transaction 0VTD) through LSMW using the recording method. But when i run the LSMW program in background it thorughs an error "No batch input data for screen SAPL0VTR 2310", probably it is because i am missing some screen in the recording. Could you please suggest me a solution on this?
Is there any other method of doing this upload?? BAPI,IDOC's, Direct Input????

should I use BDC recording ??

Transport of Queries: Query Designer vs. Transport Connection in RSA1

Hello,
actually we are having a very strange behavior towards query transports.
Whenever we collect queries using Query Designer ("save"), all query elements are written on a transport request.
Collecting queries using rsa1 transport connection collects additional repair elements. For some reason these repair elements cause problems: although query elements + repair elements are transported in transport protocol, the query itself does not exist on the quality system.
Any idea why?
Thank You!
Goliad001

Hi,
If you are getting error in transport log due to repair elements, then you can move your transport in Overwrite mode. And when you are moving your query through transport organizer make sure that you have marked your query as well for transport along with dependent objects.
Once you collect all the objects and write them to TR just have a refresh to make sure that all the objects are written to TR. You can check that just beside the object name in Transport organizer.
Regards,
Durgesh.

Move out Info Provider to other server without transport connection?

Hi All,
Could you share you thought ?
Is there a possibility to move out the info provider design & info object to other server without transport connection ?
The background is our project box will be decommissioned, and unfortunately it's not connected to development box. We've already found how to move out ABAP program, we generate it to XML, than upload it.
How about for info provider itself / info Object ? Is there a possibility to have the same treatment ?
Any thought from all of you ?
If you have the way, appreciate if you can share it to me.
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi,
From transport side, it is possible. You can create a dummy transport target system, then collect BI objects in request and release it. After release, the exported data is in dir_trans, you can manually copy it to realy target server, put them in dir_trans, and in STMS import Q, select from menu of import external request and import it.

BI 7.0 NW2004S SP7 - transport connection is not collecting all

Similar Messages

Maybe you are looking for