BI content - Error on activate 0DB IOBJ

Hello,
I'd try to activate IOBJ in BC, but all of them that need 0DB (Dun & Bradstreet) has problems in activation like that (like a sample of errors).
I opened an incident to SAP Support, but unitl now I don't have any answer.
Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'
Object '0DBADDRES1' (IOBJ) of type 'InfoObject' is not available in version 'D'
Object '0DBADDRES2' (IOBJ) of type 'InfoObject' is not available in version 'D'
Object '0DBANSALES' (IOBJ) of type 'InfoObject' is not available in version 'D'
Object '0DBANSLUS' (IOBJ) of type 'InfoObject' is not available in version 'D'
Object '0DBAREACOD' (IOBJ) of type 'InfoObject' is not available in version 'D'
Object '0DBBUSNAME' (IOBJ) of type 'InfoObject' is not available in version 'D'
Object '0DBCEONAME' (IOBJ) of type 'InfoObject' is not available in version 'D'
Details of error:
Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'
Message No. RSO252
Diagnosis
You wanted to generate an object with the name '0DB87SIC1' (in transport request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
SC versions:
SAP_BASIS     740     0009
SAP_ABA             740     0009
SAP_GWFND     740     0009
SAP_UI             740     0010
PI_BASIS             740     0009
ST-PI             740     0001
BI_CONT             757     0005
BI_CONT_XT     757     0005
SAP_BW             740     0009
GRCPINW             V1100_7310008
CPMBPC             810        0004
POASBC             100_731     0006
HANABPC        810             0004
ST-A/PI          01R_731     0000

Okay, sorry I think I jumped right in without knowledge of version. So I think you will have to reinstall the business content and before that you will have to activate the business function in SFW5.
You do this in transaction SFW5, open the folder Enterprise Business Functions.
For the Business Function DUN_BRADSTREET_CONTENT turn the Flag Planned Status (Business Function will be activated)on.
Activate your setting by clicking on the button Activate Changes.
Also refer SAP Note: 425632 - BW Content for Dun & Bradstreet which talks about activating the busness function before installation of business content for D&B. This SAP note is for BW 7.4.
Hope this helps.
Regards
Amit

Similar Messages

  • Pop-Up Menus and active content errors - Help!

    I'm attempting to add pop-up menus to my navigation bar, to
    make my site more user-friendly, but to no avail:
    I've tried designing pop-up menus in Fireworks, then
    importing the html code in, but that gives me errors when I try to
    insert the bar. Then, I tried putting my menus in different layers,
    with a "show layer" behavior on the button, and a "hide layer"
    behavior attached to the roll-off of the layer, but my version of
    Dreamweaver won't attach a behavior to a layer.
    Then, I noticed the tech-note on this site for the fix to use
    pop-ups in a template, so I added pop-up menus directly to my
    navigational buttons using the wizard. So here's where my problem
    comes in. . .
    When I preview my page, it throws up an active content error,
    but will still run. I uploaded it to my remote server, but when I
    went to the url, no action takes place when I put my cursor over
    it. Anybody have any ideas on how to create a pop-up menu that
    won't throw up an active content error? I've seen them on plenty of
    websites before, but can't figure how to do them.
    Any light you could shed would be greatly appreciated!

    > I'm attempting to add pop-up menus to my navigation bar,
    to make my site
    > more
    > user-friendly, but to no avail:
    Sometimes, they make your site less user-friendly. So be
    careful.
    The DW/FW pop-up menus are usually something that should be
    avoided. They
    are very poorly thought out and implemented, and will likely
    cause you
    continuing problems. It's foolish to devote the time to them
    that could be
    more effectively be placed elsewhere, especially since there
    are better
    options that work right out of the box, so to speak. Please
    check the free
    and commercial options here -
    http://www.projectseven.com/.
    > Any light you could shed would be greatly appreciated!
    Don't use DW/FW pop-up menus.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Ally86" <[email protected]> wrote in
    message
    news:[email protected]...
    > I'm attempting to add pop-up menus to my navigation bar,
    to make my site
    > more
    > user-friendly, but to no avail:
    >
    > I've tried designing pop-up menus in Fireworks, then
    importing the html
    > code
    > in, but that gives me errors when I try to insert the
    bar. Then, I tried
    > putting my menus in different layers, with a "show
    layer" behavior on the
    > button, and a "hide layer" behavior attached to the
    roll-off of the layer,
    > but
    > my version of Dreamweaver won't attach a behavior to a
    layer.
    >
    > Then, I noticed the tech-note on this site for the fix
    to use pop-ups in a
    > template, so I added pop-up menus directly to my
    navigational buttons
    > using the
    > wizard. So here's where my problem comes in. . .
    >
    > When I preview my page, it throws up an active content
    error, but will
    > still
    > run. I uploaded it to my remote server, but when I went
    to the url, no
    > action
    > takes place when I put my cursor over it. Anybody have
    any ideas on how
    > to
    > create a pop-up menu that won't throw up an active
    content error? I've
    > seen
    > them on plenty of websites before, but can't figure how
    to do them.
    >
    > Any light you could shed would be greatly appreciated!
    >

  • When trying to generate pdf file from firefox 7.0.1 , getting corrupt content error, used to work with previous versions of firefox

    We have done toleration testing on firefox version 5 thru 6 and haven't got an issue with our website generating pdf files for our users. One of our users upgraded to firefox version 7.0.1 and they tried to generate a pdf report, now a screen pops up with Corrupted Content Error The page you are trying to view cannot be shown because an error in the data transmission was detected. I recreated this issue on my pc yesterday by installing firefox 7.0.1. Any hints as to what I need to look at would help. Cannot provide the url because it is a secure website for law enforcement. Thanks.

    You can turn off compatibility checking, but more and more of the Google Toolbar will not work. Google is no longer supporting the Google Toolbar so you should use the alternatives.
    Hi Mark,
    See http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
    If you have an aspect that is not covered, indicate what that is; otherwise, expect you to be fully functional within 1-2 weeks.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • I can no longer access my Hughes Email in box. With FireFox 7. 0.1 Log in show 2 Emails in box, but when clicked on says Corrupted Content Error Can access with Safari

    I can access on MAC 10.4.11 & Firefox 3.6.13

    You can get a "Corrupted Content Error" error if there are multiple location redirects send via the HTTP response headers.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] - Corrupted Content error due to multiple Content-Disposition header field instances

  • Row lock contention error to resolve

    hi,
    i m facing sever issue with row lock contention error for the statement and causing concurrency and application usage more making database vulnerable
    UPDATE RULE_DATA SET RULE_DATA = :B3 , UPDATED_BY = :B2 , UPDATED_DATE = SYSDATE WHERE RULE_DATA_SEQ_ID = :B1
    RETURNING PAT_GEN_DETAIL_SEQ_ID INTO :O0
    in this query RULE_DATA_SEQ_ID is primary key and and having index too, how can i over come row lock contention error ,
    if i try like this will it work
    UPDATE RULE_DATA SET RULE_DATA = :B3 , UPDATED_BY = :B2 , UPDATED_DATE = SYSDATE WHERE RULE_DATA_SEQ_ID = :B1
    RETURNING PAT_GEN_DETAIL_SEQ_ID INTO :O0
    log errors into temp_log (sysdate||:O0 ) REJECT LIMIT UNLIMITED;
    commit;
    please help me;

    select sid,  sql_text from v$session s, v$sql q
    where sid in (select sid from v$session
    where state in ('WAITING')
    and wait_class != 'Idle'
    and event='enq: TX - row lock contention'
    and (q.sql_id = s.sql_id or q.sql_id = s.prev_sql_id));
    from the above query if found the sid and sql_text,
    actually three procedures been called at once as a batch from java and given auto commit at once for the batch;
    and in one of the procedure it is called by multiple times with different seq_id's
    what i thought is by logging error can we skip the update statement from locking , this what happening
    where v_tariff_detail_seq_id will be 25,26,28,29,30 like records
    begin
    IF v_tariff_detail_seq_id = 0 THEN
    INSERT INTO pat_tariff_details (
    tariff_detail_seq_id,
    pat_gen_detail_seq_id,
    ward_type_id ,
    room_type_id ,
    days_of_stay ,
    requested_amount,
    approved_amount,
    maximum_allowed_amount,
    notes,
    added_by,
    added_date )
    VALUES (
    pat_tariff_details_seq.NEXTVAL ,
    v_pat_gen_detail_seq_id,
    v_ward_type_id ,
    v_room_type_id ,
    v_days_of_stay ,
    v_requested_amount ,
    v_approved_amount,
    v_maximum_allowed_amount,
    v_notes,
    v_added_by,
    SYSDATE );
    ELSE
    UPDATE pat_tariff_details SET
    room_type_id = v_room_type_id,
    days_of_stay = v_days_of_stay,
    requested_amount = v_requested_amount,
    approved_amount = v_approved_amount,
    maximum_allowed_amount = v_maximum_allowed_amount,
    notes = v_notes,
    updated_by = v_added_by,
    updated_date = SYSDATE
    WHERE tariff_detail_seq_id = v_tariff_detail_seq_id;
    END IF;
    end;
    version is Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
    Edited by: user13134817 on Nov 2, 2012 2:39 AM

  • Error print success message checksum content error: Action procesada.

    I have a problem with an application in the HTML DB that I am creating. the problem is:
    I create plicacion from each one of the tables, when trying to enter a registry in the application of concept, sends east error to me, but if it stores the registry. the error is:
    Error print success message checksum content error: Action procesada./6À1Ç9ÁFE08952600ACEC1E0188ÅC/: 4730F16841157B21D061A969F6640A61.
    the design I did it with Oracle designer.
    the model contains three tables:
    1. file .tab the designer
    PROMPT Creating Table 'CONSULTOR'
    CREATE TABLE CONSULTOR
    (ID_CEDULA NUMERIC(12) NOT NULL
    PROMPT Creating Table 'CONCEPTO'
    CREATE TABLE CONCEPTO
    (ID_CONCEPTO NUMERIC(3) NOT NULL
    ,DESC_CONCEPTO VARCHAR2(120)
    ,FACTURABLE VARCHAR(5)
    PROMPT Creating Table 'GENERAL'
    CREATE TABLE GENERAL
    (ID_GENERAL NUMERIC(5) NOT NULL
    ,CONC_ID_CONCEPTO NUMERIC(3) NOT NULL
    ,CONS_ID_CEDULA NUMERIC(12) NOT NULL
    ,FECHA_ACT DATE
    ,DESCRIPCION_ACT VARCHAR2(120)
    ,CANTIDAD_HORAS NUMERIC(5)
    2. file .con the designer
    PROMPT Creating Primary Key on 'CONSULTOR'
    ALTER TABLE CONSULTOR ADD (CONSTRAINT
    CONS_PK PRIMARY KEY
    (ID_CEDULA))
    PROMPT Creating Primary Key on 'GENERAL'
    ALTER TABLE GENERAL ADD (CONSTRAINT
    GENE_PK PRIMARY KEY
    (ID_GENERAL))
    PROMPT Creating Primary Key on 'CONCEPTO'
    ALTER TABLE CONCEPTO ADD (CONSTRAINT
    CONC_PK PRIMARY KEY
    (ID_CONCEPTO))
    PROMPT Creating Foreign Key on 'GENERAL'
    ALTER TABLE GENERAL ADD (CONSTRAINT
    GENE_CONC_FK FOREIGN KEY
    (CONC_ID_CONCEPTO) REFERENCES CONCEPTO
    (ID_CONCEPTO))
    PROMPT Creating Foreign Key on 'GENERAL'
    ALTER TABLE GENERAL ADD (CONSTRAINT
    GENE_CONS_FK FOREIGN KEY
    (CONS_ID_CEDULA) REFERENCES CONSULTOR
    (ID_CEDULA))
    3 file . lis de designer
    Reconcile Report: C:\Documents and Settings\rolando\Mis documentos\aso\xxx.lis
    Generated on Tue Jun 07 09:55:25 2005 by Server Generator 9.0.4.3.14
    ====== ======== ================ ==============
    Object Property Repository Value Database Value
    ====== ======== ================ ==============
    Object Property Repository Value Database Value
    Table CONCEPTO * NOT IN DATABASE * ***
    Object Type
    Data Persistence Permanent
    Cluster
    Index Only No
    Cached
    Initial Transactions
    Max Transactions
    Percent Free
    Percent Used
    Initial Extents
    Next Extent
    Min Extents
    Max Extents
    Percent Increase
    Freelists
    Freelist Groups
    Tablespace
    Parallel No
    Comment
    Column ID_CONCEPTO * NOT IN DATABASE * ***
    Datatype NUMERIC
    Max Length 3
    Scale
    Mandatory Yes
    Default Value
    Domain
    Comment
    Column DESC_CONCEPTO * NOT IN DATABASE * ***
    Datatype VARCHAR2
    Max Length 120
    Scale
    Mandatory No
    Default Value
    Domain
    Comment
    Column FACTURABLE * NOT IN DATABASE * ***
    Datatype VARCHAR
    Max Length 5
    Scale
    Mandatory No
    Default Value
    Domain
    Comment
    Primary Key CONC_PK * NOT IN DATABASE * ***
    Enabled Yes
    Deferred No
    Immediate No
    Exception Table
    Key Column ID_CONCEPTO
    Index CONC_PK * NOT IN DATABASE * ***
    Unique Yes
    Global No
    Bitmapped No
    Compute Statistics No
    Reverse No
    Nosort No
    Initial Transactions
    Max Transactions
    Percent Free
    Percent Used
    Initial Extents
    Next Extent
    Min Extents
    Max Extents
    Percent Increase
    Freelists
    Freelist Groups
    Tablespace
    Parallel No
    Snapshot Log No No
    Table CONCEPTO Differences: 1
    Object Property Repository Value Database Value
    Table CONSULTOR * NOT IN DATABASE * ***
    Object Type
    Data Persistence Permanent
    Cluster
    Index Only No
    Cached
    Initial Transactions
    Max Transactions
    Percent Free
    Percent Used
    Initial Extents
    Next Extent
    Min Extents
    Max Extents
    Percent Increase
    Freelists
    Freelist Groups
    Tablespace
    Parallel No
    Comment
    Column ID_CEDULA * NOT IN DATABASE * ***
    Datatype NUMERIC
    Max Length 12
    Scale
    Mandatory Yes
    Default Value
    Domain
    Comment
    Primary Key CONS_PK * NOT IN DATABASE * ***
    Enabled Yes
    Deferred No
    Immediate No
    Exception Table
    Key Column ID_CEDULA
    Index CONS_PK * NOT IN DATABASE * ***
    Unique Yes
    Global No
    Bitmapped No
    Compute Statistics No
    Reverse No
    Nosort No
    Initial Transactions
    Max Transactions
    Percent Free
    Percent Used
    Initial Extents
    Next Extent
    Min Extents
    Max Extents
    Percent Increase
    Freelists
    Freelist Groups
    Tablespace
    Parallel No
    Snapshot Log No No
    Table CONSULTOR Differences: 1
    Object Property Repository Value Database Value
    Table GENERAL * NOT IN DATABASE * ***
    Object Type
    Data Persistence Permanent
    Cluster
    Index Only No
    Cached
    Initial Transactions
    Max Transactions
    Percent Free
    Percent Used
    Initial Extents
    Next Extent
    Min Extents
    Max Extents
    Percent Increase
    Freelists
    Freelist Groups
    Tablespace
    Parallel No
    Comment
    Column ID_GENERAL * NOT IN DATABASE * ***
    Datatype NUMERIC
    Max Length 5
    Scale
    Mandatory Yes
    Default Value
    Domain
    Comment
    Column CONC_ID_CONCEPTO * NOT IN DATABASE * ***
    Datatype NUMERIC
    Max Length 3
    Scale
    Mandatory Yes
    Default Value
    Domain
    Comment
    Column CONS_ID_CEDULA * NOT IN DATABASE * ***
    Datatype NUMERIC
    Max Length 12
    Scale
    Mandatory Yes
    Default Value
    Domain
    Comment
    Column FECHA_ACT * NOT IN DATABASE * ***
    Datatype DATE
    Max Length
    Scale
    Mandatory No
    Default Value
    Domain
    Comment
    Column DESCRIPCION_ACT * NOT IN DATABASE * ***
    Datatype VARCHAR2
    Max Length 120
    Scale
    Mandatory No
    Default Value
    Domain
    Comment
    Column CANTIDAD_HORAS * NOT IN DATABASE * ***
    Datatype NUMERIC
    Max Length 5
    Scale
    Mandatory No
    Default Value
    Domain
    Comment
    Primary Key GENE_PK * NOT IN DATABASE * ***
    Enabled Yes
    Deferred No
    Immediate No
    Exception Table
    Key Column ID_GENERAL
    Index GENE_PK * NOT IN DATABASE * ***
    Unique Yes
    Global No
    Bitmapped No
    Compute Statistics No
    Reverse No
    Nosort No
    Initial Transactions
    Max Transactions
    Percent Free
    Percent Used
    Initial Extents
    Next Extent
    Min Extents
    Max Extents
    Percent Increase
    Freelists
    Freelist Groups
    Tablespace
    Parallel No
    Foreign Key GENE_CONC_FK * NOT IN DATABASE * ***
    Enabled Yes
    Deferred No
    Immediate No
    Cascade Delete RESTRICT
    Cascade Update RESTRICT
    Exception Table
    Join Table CONCEPTO
    Key Column CONC_ID_CONCEPTO
    Referenced Column CONCEPTO.ID_CONCEPTO
    Foreign Key GENE_CONS_FK * NOT IN DATABASE * ***
    Enabled Yes
    Deferred No
    Immediate No
    Cascade Delete RESTRICT
    Cascade Update RESTRICT
    Exception Table
    Join Table CONSULTOR
    Key Column CONS_ID_CEDULA
    Referenced Column CONSULTOR.ID_CEDULA
    Snapshot Log No No
    Table GENERAL Differences: 1
    ====================================================================================================================================
    Total Differences: 3
    ====================================================================================================================================

    Rolando - We don't need all that information about the data model and such. Can you describe what the application does on the page that gives the error? I mean, you submit the page, it performs some after-submit processes (what do they do and how many processes are there?) and then it has some kind of branch to the same page or another page. Describe the processes, show us the success message for each process, exactly as they are formatted in the process definition page, and describe the branches (to the same page, another page, do they use URL redirects? And also please post the entire URL that you see when the error page is displayed.
    Finally, please provide all the output from the About HTML DB page: Workspace Home -> Click the About HTML DB link under Workspace Administration on the far right side of the page. Then copy all the output and show it here.
    Scott

  • Error Message: print success message checksum content error in Apex 4.0

    Hi,
    just ran into problem when i configured success messages on after-submit-processes and branch to the same page with "include process message" switched on.
    If i use german "Umlaute" in a success message i get an error like this: +"print success message checksum content error: : 88C885D0BADBDC6FC9AFB65520C079D6"+. If i avoid using "Umlaute", everything works fine. This behavior can be reproduced!
    Maybe another bug in Apex 4.0???
    My current system environment:
    - Oracle XE
    - Apex 4.0.1.00.03
    - Apex Listener on Tomcat
    - Application Primary Language is: German (Germany)
    - Application Language Derived From is set to "Application Primary Language"
    Jens

    Hi Jens,
    sorry about delay, but I fixed this problem only today. Maybe you don't fix it.
    Problem is with Tomcat URI Encoding. Default encoding is ISO-8859-1, but from APEX comes URL with message encoded in UTF-8.
    Action to fix this is add URIEncoding="UTF-8" Connector element in server.xml and restart tomcat.
    Kamil

  • Error Notification message checksum content error in APEX 4.2

    Hi,
    We are Getting "Error Notification message checksum content error" when somebody enters wrong password in one of our installations after upgrade to 4.2
    Installation -- OEL 5.5 --> Oracle 11g --> Apex 4.2 --> Weblogic 10.3.4
    I understood from other threads, that problem is lying somewhere in apex 4.2 new feature (ajax wait count down), because i get below url in browser
    https://<url>/pex/fp=117:101:954676091282&notification_msg=Invalid%20Login%20Credentials%3Cdiv%20id%3D%22apex_login_throttle_div%22%3EPlease%20wait%20%26lt;span%20id%3D%22apex_login_throttle_sec%22%26gt;10%26lt;%2Fspan%26gt;%20seconds%20to%20login%20again.%3C%2Fdiv%3E/7179423A7E6DAB93CBFA46F23FBCF804/
    However i have similar other installations, where i do see the correct error message(Incorrect Login Credentials, Please wait for <n> seconds).
    Also i have seen that on other thread somebody giving solutions for similar error in Apache installation, but i couldn't find any for Weblogic installation.
    Please help me on this.
    Edited by: user9128312 on Dec 17, 2012 6:38 PM

    Hi,
    I just checked this on apex.oracle.com and can see both the 'Error Handling' 'sub tab' and the relevant region on the page with attributes for 'In-Line Error Notification Text' and 'Error Handling Function'. This is on the 'Edit Page' page in the builder (4000:4301). Is this the page you are on and are you still not able to see this?
    Regards,
    Anthony

  • Corrupt Content Error after Upgrade to 7.0.1

    Ever since I upgraded to 7.0.1., I've been having problems with multiple websites generated a Corrupted Content Error when I try to load them. I NEVER had this before I allowed Firefox to update! I've double checked my version and it is, indeed, 7.0.1.
    This is what the message looks like:
    Corrupted Content Error
    The page you are trying to view cannot be shown because an error in the data transmission was detected.
    - The page you are trying to view cannot be shown because an error in the data transmission was detected.Please contact the website owners to inform them of this problem.
    Most frequently, I get this error when trying to play an online game, Tribal Wars, and attempting to load the initial game overview page. As soon as that page starts to load, I get this:
    http://en58.tribalwars.net/login.php?sid=ff6d10ff22d2&secret=0&mobile_no_force=0&t=9154041
    If I click on TRY AGAIN, I then get this:
    http://en58.tribalwars.net/cookie.php?url=game.php%3Fscreen%3Doverview_villages%26intro&&t=9154041
    If I click on TRY AGAIN, I then get this:
    http://en58.tribalwars.net/game.php?screen=overview_villages&intro&t=9154041
    At that point, the page finally loads. Again, I get this "Corrupted Content Error" with numerous pages now and it is quite infuriating.
    Furthermore, I'm getting DNS lookup errors right and left whereas before, I did not. Other than the update to Firefox, nothing else has changed. So this may be the result of that update, or I may have yet ANOTHER problem with Hughesnet. This I have not resolved and its like looking for a friggen needle in a haystack.
    I'm totally perplexed. Whereas I've LOVED Firefox, all of a sudden I'm rethinking that and beginning to consider scrapping it for something else.
    Any assistance here would be appreciated.

    I get this on firefox. I get this on waterfox. I get this on nightly. I don't get it on chrome. I don't get it on internet explorer. I don't get it on comodo dragon. I don't get it on arora. I don't get it on konqueror...... Anyone noticing a pattern here?
    I'm willing to admit that it's probably something to do with my isp server, so Mozilla can feel holier than thou about it, but if that's the way they insist on going, I suggest that the next time they upgrade, they call their browser Canute.

  • Flash Content error......

    Hi
    I found the error popup windows "Flash content error : 9" is
    displayed when swf file is played in Flash Lite 2.0 on Symbian OS.
    What is this error popup mean?? And how can I solve this
    problem??
    Please, help me....
    Thank you.

    Hi Ashish,
    This is the actionscript stuck error, you are trying to do
    too much in a single frame. It could be that you are loading too
    much XML data or other data from a network connection. You may be
    trying to process a lot of Actionscript in a single frame.
    If you are using XML then you should consider a different
    format, maybe key value pairs.
    Another approach is to load pieces of the data and process
    them in batches. You can use setInterval to enable a fake
    asynchronous behaviour.
    Mark

  • Flash Content Error :4

    Hi Friends,
    Does any body here faced "Flash Content Error:4" problem and
    he was able to solve it.
    Regards
    Ashish

    Hi Ashish,
    This is the actionscript stuck error, you are trying to do
    too much in a single frame. It could be that you are loading too
    much XML data or other data from a network connection. You may be
    trying to process a lot of Actionscript in a single frame.
    If you are using XML then you should consider a different
    format, maybe key value pairs.
    Another approach is to load pieces of the data and process
    them in batches. You can use setInterval to enable a fake
    asynchronous behaviour.
    Mark

  • What does the corrupted content error message mean when FireFox 7.0.1 tries to open a web page?

    Corrupted Content Error. The page you are trying to view cannot be shown because an error in the data transmission was detected. Please contact the website owners to inform them of this problem. Ever since FireFox updated to 7.0.1 this error occurs.
    Signing out of Hotmail generates that message I mentioned: Corrupted Content Error. The page you are trying to view cannot be shown because an error in the data transmission was detected. Please contact the website owners to inform them of this problem. Ever since FireFox updated to 7.0.1 this error occurs. How do I stop it? Now it appears to be doing it across multiple websites. The TRY AGAIN button always comes up when initially trying to load a webpage - very frustrating.

    You can get a "Corrupted Content Error" error if there are multiple location redirects send via the HTTP response headers or other entries may be wrong.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] - Corrupted Content error due to multiple Content-Disposition header field instances

  • Corrupted content error when trying to download .pdf file from one website.

    Unable to download .pdf file from a website, but IE8 provided the download without hesitation.
    Both v7 and v8 produced the same message:
    "Corrupted content error"
    The page you are trying to view cannot be shown because an error in the data transmission was detected.
    This may be a particular website problem, or it may be common to the particular industry segment and their protocols.
    I have followed the help leads and examined the profile for Firefox as used in this instance. Nothing untoward seemed to pop out as a causal factor.

    Reworked some of the javascript for our webserver and fixed the problem.

  • Flashlite3 - Flash content error: 14

    hello,
    in my latest flashlite3 project sometimes i get the following
    error: "Flash content error: 14".
    i can't find any kind of documentation about this error.
    can anybody help?
    every 2sec or 5sec i make a load xml request and i have an
    open netconnection for streaming videos.
    any suggestions ... dunno what i should do ...

    are there any futher information available about the errors?
    what means "FI_StreamURLLimitReachedError" ?
    maybe this code-snippet can help:
    var sound_video:Video = main_mc.sound_video; //sound_video is
    a Video object on the Stage (_root)
    var my_nc:NetConnection = new NetConnection();
    my_nc.connect(null);
    var my_ns:NetStream = new NetStream(my_nc);
    sound_video.attachVideo(my_ns);
    this is what i have in the first frame.
    the only thing i do is just to start and stop the my_ns:
    my_ns.play("video/"+videoToPlay);
    my_ns.close();
    i always close the my_ns bevor starting a new one.
    another thing wich could be responsible for the errors is an
    xml-polling every 2 or 5 seconds:
    reply_xml.load(serverURL);
    any suggestions how to solve the problem?

  • Flash Lite: Flash Content Error: 9

    I can't run a swf screensaver on my symbian phone, keep
    getting this message
    popping up : flash content error 9.

    Hi Ashish,
    This is the actionscript stuck error, you are trying to do
    too much in a single frame. It could be that you are loading too
    much XML data or other data from a network connection. You may be
    trying to process a lot of Actionscript in a single frame.
    If you are using XML then you should consider a different
    format, maybe key value pairs.
    Another approach is to load pieces of the data and process
    them in batches. You can use setInterval to enable a fake
    asynchronous behaviour.
    Mark

Maybe you are looking for

  • Hiding and Unhiding Fields On The Selection Screen

    Hi Guys/Dolls I've managed to grey out and hide some fields on a selection screen within the AT SELECTION-SCREEN OUTPUT section but don't know how to re-instate them. basically on initial entry of the screen some fields are hidden but once I enter so

  • How do I Daisy Chain external Firewire drives

    Sorry if this seems a dumb question but..... I want to add another External Hard Drive as my current one is starting to get full, I'm using a Western Digital FireWire 800 currently and I believe that I can add another External FireWire 800 drive by d

  • Problem with accessing BIEE services

    Hello. I installed Oracle Database 10g, SOA Suite, Internet Application Server and Business Intelligence Enterprise Edition. It is running on Linux. When I enter AS homepage and go to - for example - Application Server Control from it it's ok - it ac

  • Need help accessing file on LSMW.

    Hi, I want to run an LSMW for direct input program RM06EEI0. This requires a logical file path. When I go to FILE transaction there is a TMP logical file path. The physical path assigned to this is <P=DIR_TEMP>\<FILENAME>. Can I use this in my LSMW,

  • Dual Layer DVD error

    Hi, For the first time I am burning a Dual layer DVD.I have a video with file size of 8.1 Gb. When I insert to burn it on DVD 09, it gives me an error" Please insert a recordable media". I am using Verbatim DVD+R DL. Is there any relation between the