BI - Error passing data to port

Hi,
We have issues executing an info-package in BIQ200 (BIQ SYSTEM).
It uses RFC to get the data from ECQ220 (ECQ DEV SYSTEM).
The data is then written to a PSA file in BIQ200.
The process should end with a green status indicator. However it is not
ending and just times out.
Please note that this functionality worked before doing the Remote
client copy from productions system ECPCLNT320 to our ECQCLNT220. All
RFC destination are properly defined. Please note that this
functionality was working correctly before the remote client copy.
Attached are some screen shot. I am not sure if the setting in WE21 for
the transactional rfc "A000000015" should be changed from "SMXCLNT200"
to "BIQCLNT200". I noticed that the transcational rfc for "A000000016"
is BIDCLNT100 and "A000000017" is "BIPCLNT300" as per the attached
screen shot.

I checked sm21, st22 and background jobs in BIQ 200 and everything seems looks fine except for 1 job as noted below. This job could be for something ealse I checked RSM0 --> Monitor Node --> 0ACCOUNT (5/26/2010) ECQCLNT220 (Red Alert: 18082 from 0 Records) . It seems like the data is pulled from ECQCLNT220 but the records just hangs to update in BIQCLNT200. Below is the log for RSMO.
RSMO LOG
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Job log overview for job:    BI_PROCESS_CHAIN / 0400012A
Date       Time     Message text                                                                                Message class Message no. Message type
05/26/2010 04:00:13 Job started                                                                                00           516          S
05/26/2010 04:00:13 Step 001 started (program RSPROCESS, variant &0000000032064, user ID RFC_USER)                         00           550          S
05/26/2010 04:00:13 Start process CHAIN ZNGK_MASTR_TEXT in run D853A0PTCQ592DBNG11QE7V16 of chain ZNGK_MAST_DATA_LOAD     RSPC          156          S
05/26/2010 04:00:14 Chain Is OK                                                                                RSPC          028          S
05/26/2010 04:00:16 Chain ZNGK_MASTR_TEXT was removed from scheduling                                                     RSPC          026          S
05/26/2010 04:00:16 Chain changed! Scheduling in display mode not possible                                                RSPC          113          I
05/26/2010 04:00:16 Process did not report an instance -> no log                                                          RSPC          057          E
05/26/2010 04:00:16 Job cancelled after system exception ERROR_MESSAGE                                                     00           564          A

Similar Messages

Outbound IDOC( Error passing data to port)

Hi,
We have an interface running daily configured such that the idocs are converted to files and placed on a directory path.
All the idocs are processed successfully but for one hour the idocs failed and the error message says:
Status: Error passing data to port
Error at OPEN (Directory path) with operating system error msg.:No such file or directory.
The missed data from the error idocs have been sent via PFAL.
But again after this one hour the idocs were successfully posted for the same directory path.
Please let me know what the issue can be here or how can we avoid this.
Thanks.

Hi
*Some times it may happen that IDOC doesnt reach to the port , in case if you are using Transactional RFC port so*
*you can use the report RSEOUT00 for sending the IDOC to port .*
*Hope it may help you .*

Error in Production Load: Error passing data to port

Hello All,
I got this unexpected error in production. The Jobs are still processing for a long time(in Yellow status) with the error message :
Extraction (messages): Missing messages      (Status:Yellow)
     Missing message: Request received      (Status:Yellow)
     Missing message: Number of records sent     (Status:Yellow)
     Missing message: Selection Completed     (Status:Yellow)
Transfer (IDocs and TRFC): Missing messages or warnings           (Status:Yellow)
     Request IDoc : Application document posted                (Status:Green)
     Info IDoc 2 : sent, not arrived ; Error passing data to port      (Status:Yellow)
     Info IDoc 3 : sent, not arrived ; Error passing data to port      (Status:Yellow)
     Info IDoc 1 : sent, not arrived ; Error passing data to port      (Status:Yellow)
I went through the below forumn, and asked the basis to look in to it. In the meantime can any one please suggest me any solutions.
Some problem with IDoc's Settings while loading data

Hi Ram,
The problem may be with the connection to the source system you are loading the data from. You can check the connection using the note 140276.
Best Regards,
Des.

IDoc Status 02 Error passing data to port

Hi Experts,
I wrote a custome program to send customer via HTTP XML port. This program collects customer and send in single IDoc as per specified batch size.eg if batch size is 5 then 5 custome will be send in one IDoc. On devlopment environment it was working fine upto batch size 500. In quality single customer is transfering successfully but while selecting a batch size arround 100 it is displaying error 'Error passing data to port' with status 02.
Please help me to be out of this.
Regards,
Ravinder

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Error passing data to port

Hello,
I use extractor 1_CO_PA1100V04.
I see that data are uploaded. Diagnosis - current process not finished :
Number of records like that
15.42:10 (68888 from 0 records)
Errors in details :
sent, not arrived; Error passing data to port
Selected number dores not agree with transferred number
What is the problem? What is solution for that problem?
A

Hi Aleksandrs,
there must be an error logged somewhere. Please check out the weblog /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks for analyzing the issue.
regards
Siggi

Info IDoc : sent, not arrived ; Error passing data to port

Hi Folks,
While I am loading the data from R/3 I am facing the following error in Production..
Info IDoc 2 : sent, not arrived ; Error passing data to port
when I checked in SM59 every thing seems fine like RFC test connection and authorization check
In BW is check the Source system saying it is Ok.
Only the thing I found here is in TRFC, it is error when opening RFC Connection.
but it is different in SM59 saying every thing is ok, as said above..
Please help me in this regard
thanks masters
DJ

Srinivas,
Thanks for your prompt reply..
user : ALEREMOTE and password are fine..
As told I check st22 and sm21 in both sytems, no sort dumps I found..
Please help me its an urgent..
thanks
DJ
Message was edited by:
Jangareddy dasari

Idoc error -- ' error passing data to port - status 02'

Hi All,
      The IDoc gets created with error status 02. The error occured in the
production system. We have not got this error for the last 7 months since we went live and we have not made any changes either.
      The following is the error message that i get,
<b>Error at OPEN '/usr/sap/edidata/out/O_20070104_220042 with operating system error msg.: ' (check path name)
Message no. E0099
Diagnosis
An error occurred when an outbound file was opened with 'OPEN DATASET'. The name of the outbound file is:
/usr/sap/edidata/out/O_20070104_220042with operating system error msg.:No such file or directory
Procedure
1. Check whether the directory exists and is linked for the SAP System.
2. If yes, check whether there is any space in the file system.
3. If the file already exists, check the authorization and the owner.</b>
Has it got anything to do with the year beginning ?
Help me resolve this issue.
Regards,
Disney.

Ravikumar,
    I processed the errored idocs from tcode bd87, it got processed successfully.
Can you tell me how to check,
1. If the disk space is full or not.
2. Authorization for the user.
Regards,
Disney.

I am triggering My IDOC for XI interface Error passing data to port

Hi All
when i checked the partner profile , it is givng the error as this one , and i dont to how to go for this one
No Message Control entry for this entry

Hi Sridhar,
Cross check with this weblog:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Sachin

Error on BD87 -Error Passing data to Port

Hi All,
I'm facing an issue with ECC Quality system to BI Quality in BD87, In Logical System For Quality client ->IDocs in outbound Processing->RSINFO->E0(266): Could not find code page. I have done restore and connection test in SM 59, connection is fine, but still issue persists.
Regards
#Alex

Hi,
Could not find codepage. Seems to look like a language sync issue between the two systems.
Also unicode and non-unicode settings on the systems need to be checked. Further check the unicode settings on the RFC between the systems.
Regards,
Srikishan

IDoc_02_Error passing data to port-Communication error when sending with HTTP

Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Error passing data from ODS to IC

Hi,
I have a problem when passing data from ODS to Infocube. According to the messages, the problem is there is erroneous characters in one record's ZANLAGE characteristic. I check and found the problematic record. Mi question is Why the problem showed up when passing data from ODS to IC instead of when passing data from Infosource to ODS? I check de ODS and the problematic record is in: "       " (hex.). How this characteristic value entered in the ODS correctly, but it can not enter the IC??
Mauricio

Hi,
I check the ODS settings and the BEx option is not checked. This may explain whay the problem showed up passig from ODS to IC and not before.
What should I do to catch the problem and pass the data from the ODS to the IC?
My problem is how to identify this record, can I use:
if ZANLAGE = "       "
ZANLAGE = "XXXXXX".
end if.
Remember that "       " is Hex. code!!.
regards
Mauricio

Error while passing date parameters in procedure and commit issue

Hi
1) I am doing a archiveing records and pls find my code below and i have couple of issue,pls find my code and want to ensure the commit is happening every 100000 rows inserted but i am archeiving a huge table but when i checks the table frequently it shows 0 records and after it shows count the actual rows around 20 million records.How can i ensure it commiting on every 100000 records. pls find my code my db version is 10g on windows
CREATE OR REPLACE PROCEDURE doins as
cnt number:=0;
FOR x IN (select * from Call_log
where trunc(c_date) = to_date('11-Aug-2008','DD-MON-YYYY'))
LOOP
INSERT INTO call_arch
select * from Call_log
where trunc(c_date) = to_date('11-Aug-2008','DD-MON-YYYY');
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
2) Error while passing date as parameter i am getting following errors while passing date parameter pls find my code and errors
CREATE OR REPLACE PROCEDURE doins(p_date date) as
cnt number:=0;
begin
FOR x IN (select * from Call_log
where trunc(c_date) = to_char(p_date,'DD-MON-YYYY'))
LOOP
INSERT INTO call_arch
select * from Call_log
where trunc(c_date) = to_char(p_date,'DD-MON-YYYY');
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
end;
exec doins(11-Aug-2008) then gives
SQL> exec doins(11-Aug-2008);
BEGIN doins(11-Aug-2008); END;
ERROR at line 1:
ORA-06550: line 1, column 16:
PLS-00201: identifier 'AUG' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
if i gave exec doins(11-08-2008) it gaves
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'DOINS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
rgds
rosh

CREATE OR REPLACE PROCEDURE doins(p_date varchar2) as
cnt number:=0;
begin
FOR x IN (select A.rowid,A.* from Call_log A
where trunc(c_date) = to_date(p_date,'DD-MON-YYYY'))
--hope that's c_date columne is DATE datatype
LOOP
INSERT INTO call_arch
select * from Call_log
where rowid=x.rowid;
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
end;
thats your correct procedure - but NOT CORRECT ISSUE.
You should use bulk collect with limit clause and forall clause to do it faster!!! Or Merge clause.

Error when passing data to Business connector

Hi All,
I am getting the error (com.wm.lang.flow.FlowException: [B2BCORE.0049.9010] Service; An error occurred when executing a REMOTE FUNCTION CALL.) when i am passing data from a program to business connector.
I have tested my connection in R/3 and business connector and the connection is fine. Can any one pls let me know how to handle this error.
Thanks,
Raju

Hi
Answer is pure assumption
Pls check the following OSS notes
(1) Note 412511 - IDocs with segment release 2 and MarketSet Connector
(2) Note 407867 - IDoc segment release 2 (R/3 release < 4.0)
Pls take opinion from SAP / BASIS before implementing the OSS note
Regards
Madhan D

Error when passing data from app server...

Hello Experts,
I am encountering an error when trying to pass data from application server
to my internal table. Below is the error:
"You cannot convert the character set"
Hope you can help me guys.Thank you and take care!

Hi ,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures. The code is base on uploading a simple txt file.
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Reward points if it is usefull ..
Girish

Passing data from JavaScript to Applets (Error when trying to pass data)

Hi,
I've wrote a small applet for lists but when I try to pass data from my
JavaScript to my applet, I get an "Error: Object doesn't support this property or method". I get this error with a select other sites including the page I'm writing, leading me to believe I may not have installed requried files or set required options. I've included the listing of the code snippet where the error occurs.
document.listApplet.testMethod()OR when I use:
document.applet(listApplet).testMethod()The applet is loaded by this statement:
<OBJECT CODE="CustomAppletList" NAME="listApplet" ID="listApplet" WIDTH="1000" HEIGHT="600"></OBJECT>and loads fine but no data is passed through it's public methods. Can anyone suggest ideas how I can successfully pass data from my JavaScripts to my applets?
Devyn

this should work for you. In your javascript do this.
var myApplet=document.listApplet;
myApplet.testMethod()
If you need more help let me know.
Paul

BI - Error passing data to port

Similar Messages

Maybe you are looking for