BI IP - Upload flat file - "requested resource not found" when typing URL

Hi,
we tried to implement the "upload flat file" functionality (blog Marc Bernard). We followed the different steps and included the bug fixes as well. When we want to launch the URL in an internet explorer session we get message "requested resource not found".
Hereby the URL used:
http://sapscmbid.vpkgrp.int:50100/sap/bc/webdynpro/sap/zrsplf_file_upload?sap-language=EN&planning_sequence=FILE_SEQ&show_messages=WEXA
Do you know what we did wrong? We would like to finish this by the end of this week ...
kind regards
D

Hi,
when we use URL http://sapscmbid.vpkgrp.int:50100/ we see the screens of the portal so I presume this server and port is accurate (we use the same link for the planning modeler and this works fine).
The SICF service zrsplf_file_upload has been imported and has status active. Should we check other things as well?
D

Similar Messages

It says "request resource not found" when trying to restore my iphone 4s

it says "request resource not found" when trying to restore my iphone 4s

This article is for iPhones that are unable to be restored.
You may have to try recovery mode (as described below) more than once.
http://support.apple.com/kb/HT1808

Having an issue with itunes purchase, message shows "could not complete itunes store request, requested resource not found." My account has been debited for the price of the download, but I dont have the download.

Need some help, I was downloading an album when the message "could not complete itunes store request, requested resource not found." "Error in the itunes store please try again later." My account has been deducted for the amount of the album, but I dont have it downloaded on my computer. Please help!!! Thank you!!!

Does the purchases show in your Purchased list?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
Next contact iTunes by:
Contact iTunes

Can't Download from iTunes Store - "Requested Resource Not Found" Error

I am trying to download a couple of (free) apps for my iPhone and iTunes is throwing up an error saying "The requested resource was not found. There was an error in the iTunes Store. Please try again later." Is anyone else having this issue at the moment? Is the store down?

It has been a few hours now. Same problem. "Resource Not Found" error when trying to download apps from the iTunes store. Anyone else having this problem? Anyone NOT having this problem? Anyone?

Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

Any help is appreciated. Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
using photoshop elements 10 on imac with OSX 10.8.2
Thx

Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

Requested resource not found for jsp

I just installed Tomcat 6.0.18 on Windows XP workstation.
I can see the Tomcat home (http://localhost:8080/) and can get to the example sites (http://localhost:8080/examples/jsp/) and see all the example apps working.
I tried to create a new folder called first under webapps and create a simple hello world jsp and it doesnt work.
Here is my web.xml which is located in first\WEB-INF:
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/javaee"
   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
   version="2.5">
</web-app>My attempt to see the hello world message in /first/index.jsp gives me back this response:
description The requested resource (/first/index.jsp) is not available.
Please advise.

From your description it appears that you have the right directory layout.
What is the complete url you are trying to access this with?
Take a look in the [TOMCAT]/logs directory to see if there are any error messages there. They might help you troubleshoot.
Also, try copying the web.xml file from one of the example directories, and see if that does any better.
The best thing I think I can do is point you at [this tutorial|http://www.coreservlets.com/Apache-Tomcat-Tutorial/] for starting with Tomcat.
See if you can get that going.

Requested Resource Not Found

Hi,
I am trying to access my website (java server pages) with
jrun and it shows the following on the browser:
Oops! We couldn't find your document.
The file that you requested could not be found on this
server.
On the console, it says "error Requested resource login.jsp
not found." Can anyone please let me know what I'm missing?
Thanks,
Tina

1. Try registering it to see if it might have some warranty left.
2. Complain to the seller.
3. Complain to Ebay.
4. Try the 5Rs on Ipod support http://www.apple.com/support/ipod/five_rs/
5. I hat to say this but a short sharp tap of the side of the ipod on a hard surface completely restored my un-restoreable 20Gig ipod!!
Cheers,
John

Corrupt iPod - Requested Resource Not Found?

I recently upgraded to iTunes 7.3.1
However, when I plugged in my iPod I received an error message saying:
"iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
I just disconnected and then reconnected my iPod, but still received the same message.
So I clicked Restore, and received this message:
"Are you sure you want to restore the iPod "iPod" to its factory setting? All of your songs and other data will be erased."
I clicked Restore, and received this message:
"There was a problem downloaded the iPod software for the iPod "iPod". The requested resource was not found."
What shall I do? Where can I get the iPod software? Thanks for the reply.

Sounds like you have a drive conflict:
http://docs.info.apple.com/article.html?artnum=93499
Disconnect all other USB devices except your iPod, keyboard and mouse before you try to change the drive letter.
Message was edited by: deggie

Error on new macbook pro: requested resource not found

hey everyone,
i just purchased a new macbook pro yesterday. im trying to download movies for a flight, but i can't even sign in (or authorize) my new comp with the apple store. when i try to do either i get an error message, +"we could not complete your request the request resource was not found"+
the weird thing is my itunes works fine on my imac. i was able to buy a tv episode earlier today no problem. both itunes versions (on both comps) is up to date.
ive read old threads where some suggested that itunes was down and/or to exit itunes and log back in. i don't think itunes is down b/c it works fine on my imac (just tried a few minutes ago). i tried exiting itunes on both comps and still no luck.
any suggestions?

ok i just tried it again, for like the 50th time, and it magically worked.

LabVIEW: Resource not found. when running executable

Hi,
I've made a fully functional vi with LabVIEW 2009 (developer suite) and need to be able to run it on another PC without it. I have downloaded LV Run-Time 2009, but when I try to run the executable I built, I recieve an error which reads:
LabVIEW: Reasorce not found.
An error occurred loading VI 'NI_AALPro.lvliberivative x(t).vi'.
Labview load error code 3: Could not load front panal.
I can run the executable on another PC with LabVIEW no problem. I've read somewhere about the need to stop the front panal from beng removed on sub VIs with Application Builder, although I don't think I have it. I apologise in case this is a dumb question and I appreciate any help.
Cheers
Luke
Solved!
Go to Solution.

Removing or not removing the front panel probably has nothing to do with your problem. My guess is that you did not create an installer. If you had, it would have included lvanyls.dll in a data folder under the folder where your exe was installed.

Tags are not found when typing a keyword into the location bar

Previously when I typed a tag into the address bar - tagged bookmarks would show up. Now very rarely does this happen and instead search engine search terms show up.
To search for tags/keywords I now have to open the bookmarks and do a search in there. Very inconvenient... it suks big time. WTF happened?
Thanks Joe

I think I am on the way to an answer. I turned off ALL add-ons and tags are now showing up in adress bar searches.
Thanks! :-)

Path or file name "java" not found error

I am getting the error, path or file name "java" not found, when I type in sqlj -version.
I am using a NT server and I have added the CLASSPATH and path to it.
Does anyone have any ideas.

What version of SQLJ are you using? What do you see when you type
java
or
java -version
on the command line?

LSO Content Player Error - HTTP Error 404 - File or directory not found

Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
Maahir

Dear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli

Flat file message is not recognized.

I have been pulling my hair out for days now. I have an ANSI x12 214 v4010 document that validates against the xsd file in visual studio when I remove the Interchange headers
I add the interchange headers back and deploy for it to pick up the file and I get the error:
The flat file message is not recognized. Unrecognized messages are not allowed as per the specified configuration.
This is the extent of the error information that Biztalk will respond with. I have to assume the issue is with the interchange headers since I know the transaction portion of the document itself validates. Below is a copy of my headers.
ISA*00* *00* *ZZ*SEND *ZZ*RECV *040805*0416*U*00401*000000001*0*T*^~GS*QM*SEND*RECV*20040805*0416*000000001*X*004010~[214 Transaction]~GE*1*000000001~IEA*1*000000001~
I am beginning to believe the problem may be due to the trading partner agreement. I originally didn't have an agreement at all and was just publishing my service. I have now added two partners for the send and the receive. I also created
an agreement with the Hosted Partner qualifier matching the sender info in the header and the Guest Partner being the receiver info. I set the version and type to match, added the sender application qualifier (GS02) which matches the sender info (ISA06)
and set the schema to the one I validate locally X12_00401_214.
Despite having the agreement in place that matches the headers I still receiving a flat file message not recognized error with no additional error information.
Please rescue me from the insanity...

Hi,
We need a few more details about his scenario.
have you uploaded this particular schema to the service?
What kind of bridge are you using – EDI / AS2 / XML
What tool are you using to push the message to BizTalk service? If you are using EDI / As2 bridge, are you adding proper HTTP headers while sending message from the client?
You may go through the blog
Test the Bridges - Post messages – 3 easy tools for the developers
http://blogs.msdn.com/b/mabs/archive/2014/10/14/test-the-bridges-post-messages-3-easy-tools-for-the-developers.aspx
Check the section
Considerations for the EDI / AS2 Bridges
Hope this helps you
Girish Prajwal

Problem in upload flat file into bw-bps using web browser

Hi All,
I have follwed the steps as per the how to guide to upload flat file,its seems to be fine but when try to upload by running the URL its giving error "Value of variable Data Slice Global ( ZFIE0ALL ) cannot be determined " and warning "Errors occurred when executing planning function TUPLOAD(EXIT FOR UPLOAD DATA)/T0000000(WEB UPLOAD".
Since i am new to BW/BPS , also let me know, how test it , when i run file_upload URL directly its giving follwing error.
SAP Note
     The following error text was processed in the system:
     An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither      handled locally, nor declared in a RAISING clause
When i run page1 url and if i file_load url, then its prompt me to see upload function, path for flat file. But when enter path of flat file and press upload function button ts giving error "Value of variable Data Slice Global ( ZFIE0ALL ) cannot be determined " and warning "Errors occurred when executing planning function TUPLOAD(EXIT FOR UPLOAD DATA)/T0000000(WEB UPLOAD".
FYI..i am using new design HTMLB option in how-to-doc.
Please help me to resolve this. Thanks in advance.
Also pls let me know can i debug this application?How ?
Vishal
Message was edited by:
        vishal kashyap
Message was edited by:
        vishal kashyap

Hi Vishal
Can u guide me , by what condition the data is selected in XTH_data ( Hashed table ) before the data is written by flat file function module .
Reply me ASAP ,
Thanks
Anup Singh

BI IP - Upload flat file - "requested resource not found" when typing URL

Similar Messages

Maybe you are looking for