BI Statistics Master Data Load

Hi,
We are implementing BI Statistics and BI Administration Cockpit.  One of the OSS Note 934848 mentions that I have to install/activate all the datasources that are under the Application Component BW_TECH --> TCT.
My question is do I have to consider loading the master data for all those datasources/infoobjects ?  There are nearly 80 - 100 datasources.
The note 934848 mentions to install the Business Content Process Chains.  And I see that those process chains are hardly loading 10 - 12 master data loads.  Is it OK if I just make use of those business content process chains to load master data ?
Initially I have created DTP's and Transformations to load master data for approx 50 objects.  Later I came to know that BI statistics Cubes etc follow the 3.x format and I should use those as it is delivered.  So, can't I still make use of the 7.0 converted datasourse objects with DTP to load the data ?
-or- do I have to delete all the transformations and DTP's and migrate all those DataSources back to 3.x ?
Thanks,

Hi Sesh,
1. Yes you need to activate all those Datasources. Its better to activate all of them as in BI 7.0 TCT infoproviders are used as basis for Workload monitor ST03 also in addition to Admin cockpit.
2. Its sufficient to just load the master data using the standard process chains (Init chains once followed by delta chains.
3. Its recommended to use the TCT content as 3.x only.
4. No need to migrate the 3.x content, just use as it is.
for more information you can refer to this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=279998&tstart=0">thread</a> and related posts by <a href="https://forums.sdn.sap.com/profile.jspa?userID=2035002&start=0">Rajani Saralaya K</a>
Assign points if helpful,
Regards, Uday

Similar Messages

  • Master Data loading got failed: error "Update mode R is not supported by th

    Hello Experts,
    I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
    For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
    "Update mode R is not supported by the extraction API"
    Can anyone tell me what is that error for? how to resolve this issue?
    Regards,
    Nirav

    Hi
    Update mode R error will come in the below case
    You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
    This time the load will fail with update mode R.
    As repeat delta is not supported.
    So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
    example your fiorst delta failed with replication issue.
    only replicating and repeaing will not solve the update mode R.
    you will have to do both replication of the data source and re-int for the update mode R.
    One more thing I would like to add is.
    If the the delat which failed with error the first time(not update mode R), then
    you have to do init with data transfer
    if it failed without picking any records,
    then do init without data transfer.
    Hope this helps
    Regards
    Shilpa
    Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

  • Problem with Master Data Load

    Dear Experts,
    If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
    This it is the error:
    Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
    Message no. RSDMD218
    Diagnosis
    During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
    The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
    Procedure
    u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
    u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
    u2022     Re-schedule the master data load process to avoid such situations in future.
    u2022     Read SAP note 668466 to get more information about master data update scheduling.
    Other hand, the SID table in the master data product is empty.
    Thanks for you well!
    Luis

    Dear Daya,
    Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
    We are on BI 7.0 (system ID DXX)
    While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
    Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
    We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
    The Master Data tables (S, P, X) are not updated properly.
    The following reparing actions have been taken so far:
    1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
    2.     Follow instructions from OSS 632931 (tcode RSRV)
    3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
    After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
    u201CCharacteristic XXXX00001: error fund during this test.u201D
    The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
    Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
    It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
    Could somebody please help us, and let us know how to solve the problem?
    Thank for all,
    Luis

  • Error in Setting lock for Master Data Load

    Hi Team,
    I encounter the following error while uploading the Masterdata
    "Lock NOT set for: Loading master data attributes
    Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
    I Performed the following steps
    1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
    2) RSATTR->infoobject list-> no infoobject found
    3)Tried after sometime ,but load continue to fail
    Could anyone help to solve the problem
    thanks
    Bala

    Hi Bala,
    Check in SM12 if there are any locks exist with the change run number?
    First check if there are any Master data loads running related to it?
    Check in the Attribute change run screen if there are any change run steps are running?
    Once after checking the above if no locks exist and no master data is running then check the below steps
    1. Run RSA1 transaction
    2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
    3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
    4. Click "Reset Status" button at Run ID 465451241
    NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
    If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
    Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
    It releases all the locks by that change run....and continue with your further work/jobs...
    Regards
    KP

  • How to rectify the errors in master data loads & transactional data loads?

    hy,
    please any one tell me
    How to rectify the errors in master data loads & transactional data loads?
    thnQ
    Ravi

    Hi,
    Please post specific questions in the forum.
    Please explain the error you are getting.
    -Vikram

  • R/3 Master Data Load Error

    Hi Experts
       Our master data load from R/3 to BW was failed today.
    This is the error message on status Tab of failed request
    Diagnosis
    No IDocs could be sent to the SAP BW using RFC.
    System response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
    Further analysis:
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
    I navigated through Environment -> Transact. RFC -> In source system"
    In R/3 i got the following error
    timeout during allocate / CPIC-CALL: 'ThS
    #Timeout during connect                 
    How shall i proceed now.
    Thanks

    Hi,
    Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
    If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
    Cheers,
    Kedar

  • Master data Load Failure

    Hi All,
    Could any body clearly explain the following options in the Info Package of master data Info Object with full update
    Update data
    1. PSA and then into Info Obejcts
    2  . Only PSA   ( Update Subsequently in data targets )
          Data source trasfers no duplicate records
         Igonore double data records
    While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
    Thanks in Advance...
    Regards,
    Nagamani

    Hi
    U r master data might have the Dublicate records
    select the PSA
    and select the option
    Ignore dublicate data records
    IF  you have the Deblicates
    EX
    CNO
    1010
    1020
    1010
    ITs not alowed the 1010 record
    Regards

  • Master Data loading in BPC 7.5 with prefix

    Hi Gurus,
    I need a help in master loading in BPC 7.5
    Currently we are loading GL account with prefix of A and controlling area(COA1)
    BI:0000600000
    BPC: ACOA10000600000
    I have maintained logic in the transformation file as below. Z001 represents the hierarchy Node.
    ID=IF(ID(1:4)=STR(Z001) then STR(A)+ID;STR(A)0CO_AREAID)
    Now client has came with new requirement as below
                               BI                   BPC
    GL Acc               0000600000     A_600000
    GL Node             Z00113            Z001_13
    GL Node             Z00213            Z002_13 
    For the above requirement i have maintained the logic in the transformation file as below. when running master data load package i got the error as
    Line 755 :Command failed ; end position is out of record index
    ID=IF(ID(1:4)=STR(Z001) then STR(Z001_)+ID(5:12);STR(A_)+ID(5:12))
    I need your help in modifying the logic in the transformation file for handling the above requirement.
    And also for handling two hierarchy Z001 and Z002.
    Thanks
    Mahesh

    Hi,
    Your command should like:
    ID=*IF(ID(1:4)=*STR(Z001) then *STR(Z001_)+ID(5:6);*STR(A_)+ID(5:10))
    Hope this helps.

  • Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

    Hi Experts,
    I am performing master data load through standard DM package with Filter selection as:
    1. Chart of Accounts
    2. Hieararchy selection has 4 hierarchy names
    3. Selected Import Text nodes
    4. Selected Set Filters by Attribute OR Hierarchies
    I have run this DM package for a set of data and selections a week ago and it worked fine.
    However when i run it now, it is giving issues,
    It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
    I am running the DM package in Update and have selection as External.
    Any sugestions for checks / has anyone encountered this issue earlier?
    Regards,
    Shweta Salpe

    Hi Guyz,
    Thanks.
    I found that the issue was with the transformation file where i was maintaining the RATETYPE.
    When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
    however now i do not have Ratetype populated in the system.
    my rate type mapping is:
    RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
    and in conversion file i have TOSKIP     *skip
    I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
    So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
    Regards,
    Shweta Salpe

  • About Master data loading

    How the Master data will be loaded from R/3  to BW?
    Just u give detailed answer and if possible navigation. and if any important points are related with it, just u tell me.

    Hi
    Go through these links..........
    http://help.sap.com/saphelp_nw04/helpdata/en/58/a4513ce4af0a40e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/b007720ae4c248b945bb16f24bba31/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/help/sdn_nw04/sapdocu/netweaver/webas/630/helpdata/en/fa/9a2096e32f11d1a5370060087a79ea/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a634be07211d2acb80000e829fbfe/content.htm
    Re: Master data identification
    Master Data Loading Steps?
    Master Data Extraction
    hope it is helpful..................
    assign points...
    GTR

  • Blank Row in table during Master Data Load

    I am having some success with my master data loads, but when I maintain the master data I have noticed that every table has had a blank row inserted.
    Does anybody know why and what I should do with the row (i.e. delete it)?

    This blank row is by default created and you can no way delete it.  Though you delete it, a new row with blank values will be appended.  This is required for some technical reason while reading the table within ABAP programs. 
    This is applicable only for SAP tables and may not be required for custom developed ones unless you want to use this in screen programs.
    Regards,
    Raj

  • Master data loads for Attributes and texts failing

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

  • Master Data Loaded but not able to see.

    Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
    Many requests are available showing number of records Transferred and Updated.
    What could be the possible reason?

    Hi Sarabjit,
    Welcome to SDN!!
    You need to load the transaction data into the Info-provider to see the contents and not just the master data.
    In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
    Bye
    Dinesh

  • Master Data Load to APO from SAP MDM through SAP PI

    Hi SDners,
    This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
    Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
    Thanks,
    Prabuddha

    Hi,
    Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

  • Master data load gives dump with exception CX_RSR_X_MESSAGE

    Hi all,
    I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
    I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
    We are on SP 12 in BI 7.0.
    We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
    with regards,
    Ashish

    Hi,
    The log of the dump is given below.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
    and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
    Information on where terminated
    Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 78
    of the (Include) program "LRRMSU13".
    Source Code Extract
    Line
    SourceCde
    48
    *... Nachricht an den Message-Handler schicken
    49
    50
    *... S-Meldung wenn kein Handler initialisiert
    51
    DATA: l_type  TYPE smesg-msgty,
    52
    l_zeile TYPE rrx_mesg-zeile.
    53
    CALL FUNCTION 'MESSAGES_ACTIVE'
    54
    IMPORTING
    55
    zeile      = l_zeile
    56
    EXCEPTIONS
    57
    not_active = 1.
    58
    IF sy-subrc NE 0.
    59
    l_type = 'S'.
    60
    ELSE.
    61
    l_type = 'W'.
    62
    ENDIF.
    63
    64
    CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
    65
    EXPORTING
    66
    i_class  = 'BRAIN'
    67
    i_type   = l_type
    68
    i_number = '299'
    69
    i_msgv1  = i_program
    70
    i_msgv2  = i_text.
    71
    ELSE.
    72
    DATA: l_text  TYPE string,
    73
    l_repid TYPE syrepid.
    74
    75
    l_repid = i_program.
    76
    l_text  = i_text.
    77
    >>>>>
    RAISE EXCEPTION TYPE cx_rsr_x_message
    79
    EXPORTING text = l_text
    80
    program = l_repid.
    81
    ENDIF.
    82
    83
    ENDFUNCTION.
    I went to SM21 and went through the system log.  There was a log with the following text  ORA-20000: Insufficient privileges#ORA-06512: at
    "SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
    I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
    I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
    Thanks Oliver and Oscar, for replying.
    regards,
    Ashish

Maybe you are looking for

  • User-Exit to limit the unplanned delivery costs in a PO

    Hi All, My Requirement is that I need to Limit the Unplanned Delivery Costs in a Purchase Order.I find there exists no ways to arrive at this through Customizations.Could anybody please guide me If this can be Fulfilled through a User Exit.If yes,cou

  • How to maintain Master Data through Web Application Designer layout.

    Hi. I'm Internship and I have to do something that it doesn't work. I explain to you. I have to make a layout via Web Application Designer to permit users to add a line in the master data XST_RFC. For that, I did two things: First I followed this url

  • JTable Print to Adobe Acrobat Error

    I'm having trouble printing a jTable using Java 1.5.0_03 to Adobe Acrobat (6.0). Whenever I call print using (assuming proper try/catch statements) either jTable.print();or printJob.setPrintable(jTable.getPrintable(JTable.PrintMode.FIT_WIDTH, new Mes

  • Oracle Forms and reports 11g release 2

    I would like to know if there is any documentation of High availability active-active solution for oracle forms and reports configuration (regardless of platform restriction) , oracle docs/meta link docs are welcomed :)

  • Quicktime Reference Export from Adobe

    I'm primarily an Avid user but am learning Premiere Pro from scratch. Is it possible to export a QT reference file from Premiere? And if not is there an equivilent in the Adobe world? Many thanks.