BIA Master Data Index Not Updated After Change Run

In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION. One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records. I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run. Is this a bug? Thanks.

Hi Thao,
I see one of 3 possible scenarios:
1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
Is it any of these 3 scenarios, or you have the 4th one?
Regards,
-Vitaliy
Edited by: Vitaliy on Aug 19, 2008 1:59 PM

Similar Messages

Actual end date is not update after closing a change

Hi,
We are using SCSM 2012, now I want to make report on which changes have been closed in the last month. In som way all the changes that have been closed in SCSM do not have an actual end date, all the changes that I have imported from our old tool does. It
looks like SCSM does not update this field by itself, but I can't find a field in the change managment module in which I can provide the actual end date.
How does SCSM 2012 copes with this?
Kind regards, Marco Jansen

Hi Greg,
We are actually testing this now, as MS is not planning to solve this issue on a short term. The use of the last modified date is casuing u a lot of trouble now as we have had an change on our change form casuingthe last modified for all change to be set
to the date of the change. That was the end of my closing data.
We are now getting the WA in place from Netviaconsulting, but that is not a complete solution. Not all change reach a state of complete before they are closed. Sometime you will close a change that is cancelled ,rejected or failed. this means that when
triggering on an update of the record every update will set the actual enddate. Besides when setting the actual enddate on the status closed, the date is update every time the worflow runs.
We just want the actual enddate to be filled when a change comes to the status closed from any other status, but this sets the actual enddate on every status change of the change. in some strange way ewe cannot figure this out.
If anybody has the correct configuration for this workflow it would be very useful. Most prefereably MicroSoft in this case.

Master data tables not available after installing trail version sap abap

Hi Experts,
After installing trail version of sap for practicing SAP ABAP..i am not able to access master data tables like MARA EKKO etc.
Please let me know how i can access these tables data .
Is there any alternate to access these tables?
Thanks and Regards,
Siva

Hi Siva,
Master data table and any other application table are not present in trail systems. Notice that solely purpose of those trials is to learn/practice basis stuff and ABAP programming.
If you need to practice ECC's modules like FI, SD, ... you need to have an access to IDES system. For this you need to be SAP partner or customer.
cheers
m./

PS on ERP not update after changing person responsible on PPM Phase or Task

I've implemented BADI DPR_FIN_GECCO_ATTR to update additional attributes on the ERP side, such as person responsible and some of the user fields. In a normal create of the project everything works fine. When only the person responsible is updated in cProjects no update occurs on the ERP side. Everything is updated properly on the PPM side, there is no error on COCPCPR, but the person responsible field is not updated. If the person responsible is updated on the PPM side and also another field, like the long text, everything works fine. For some reason, the change of just the person responsible does not trigger a replication on the ERP side.
Has anyone come across a similar situation? Is there a way to trigger that the ERP side should be updated?

Hi Experts,
I've been able to identify the problem and need help with the solution. The problem when just the person responsible is changed on a task in PPM is that change is recognized as a change to the object CL_DPR_ENTITY_LINK. This type of change does not identify the task and insert a record in the change table for the task object. In method ON_APPLICATION_OBJECT_CHANGED of class CL_DPR_APPL_OBJECT_CHANGE_MNGR the table mt_updated_objects needs to be updated with the task if it is not already present when this type of change occurs.
My question is how can I get the task object associated with the DPR_ENTITY_LINK object to insert into that table?
Points will be rewarded for right solution.

IOs apps not updating after changing country

Hi all,
This has been an issue for a while that I have ignored but can no longer. I originally began using an iPhone and iPod touch several years ago in the US. 3 years ago I moved to Canada, and since then have noticed that apps purchased while I had a USA iTunes account will not longer update unless they are on my device (ie, no updates offered thorugh iTunes). Once moving to Canada and switching financial info from USA to Canada, and subsequently changing the country of my iTunes store (as I was forced to for via the required credit card for an iTunes account) the original USA apps will not update. I realize this is going to be an even bigger problems on moving back to the USA here in a few months as all my Canadian apps will no longer update. What is the solution. All apps have been purchased under the same iTunes account, the only thing that has changed is the country of the iTunes store (all apps are available in both countries also so that is not the cause).
Thank you

Not my issue. Many apps do update fine. 5 pesky ones are being difficult and refuse to update. Tried on various wifi networks with same result. Other applications do update. All the latest as far as iOS is concerned although sadly I am still using an iPad 2.
What is the same is only that a number of my applications in the App Store fail to update on my iPad 2.

ITunes podcast page not updating after changing feed

Several months ago I successfully published a podcast to the iTunes Store. The following is the location of my podcast:
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=335499017
Now, I've changed the feed URL as well as some of the details in the feed file (.xml). But the itunes page shows the old info! I made th URL change per the Apple guidelines (using the <itunes:new-feed-url> tag). I placed the new-feed-url tag on the OLD file only. I hope that's the right way to do it! I also created a 301 rediriect FROM the old feed TO the new one.
Does it take TIME for the change to take effect in itunes?

The feed URL registered with iTunes is http://www.semantica-portuguese.com/podcast.xml
There is nothing at this address. It makes no difference what you do anywhere else, until there is a feed file at this URL with the redirect tag in it iTunes cannot take any action.
I've updated the URL in the old feed file
Are you saying that the old feed file is at yet another URL? If you originally had another URL, and you placed a redirect tag in that to http://www.semantica-portuguese.com/podcast.xml then iTunes has redirected, and making alterations to the original feed is not going to have any effect since iTunes is no longer looking at it.
The only way out of this is to place at copy of the feed with the redirect tag at
http://www.semantica-portuguese.com/podcast.xml

URGENT: master data records not updating

hi all,
this is all in Prod server.
i have first level C1 center infoobject in BW and second level C2 center infoobject.
C1 has data like
center-1234,
valid from : 01.01.1000
valid to: 31.12.2006again another record for the same center
center-1234
valid from : 01.01.2007
valid to: 31.12.9999
so when i do the full update from C1 to C2 then C2 should also have the same data as above but it C2 is having only this record
center: 1234
valid from: 01.01.1000
valid to: 31.12.9999
it was not the case before, i had very fine data in C2 just like in C1 because C2<-C1 (C2 gets data from C1)
i have tried with options like start date 01.01.1000 end date 31.12.9999 in the infopackage settings under Update tab
I have gone for simulate update of the pacage in every step of transfer rules, communcation structure and update of data target. the transfer rules has the fine data as in C1 but when it is landing in C2, valid to and valid from is 01.01.1000 and 31.12.9999, it is not fetching interval records with valid to 01.01.2007 to 31.12.9999
Please suggest what i must do to have the same data which is there in C1 object in C2.

hi lieu,
logically u r center means it is valid through out year (01.01.1000--31.12.9999).
load center for one time zone the system automatically partions the second half.
you can refer c1 to c2. this may be simple.
bye.

Screen.PrimaryScreen.Bounds not updated after change in resolution

Hello,
When my application changes the Resolution and then calls
System.Windows.Forms.Screen.PrimaryScreen.Bounds
call returns the previous Screen Bounds instead of the recently updated one.
How can "System.Windows.Forms.Screen.PrimaryScreen.Bounds " be forced to return the updated screen bounds ?
Is this a bug ?
Thanks
Anup

Hello VargheseA,
Since this issue is related with windows form, i move it to the windows form forum, there are windows form experts who would help you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Project Variables Labels Not Updated After Change in OBPM 10GR3

Hi all,
I had previously deployed a project to the Weblogic Enterprise Server with a set of project variables , layouts, presentations and views.
Now, I changed the labels to the Project Variables using Studio. Made them all Upper Case and re-deployed the project to the Weblogic Enterprise Server.
I restarted Weblogic. I restarted the engine.
But the Project Variables labels in the views did not change from being lower case to upper case.
Why is that so?

Anybody on this?
Why do the labels of Project Variables not change in Weblogic Enterprise Server 10GR3 although they change in BPM Studio?
I also tried deleting these project variables from the Engine Tables --> PPROCINSTANCE and PPROCINSTEVENT
Restarted Weblogic
Restarted the Engine
Restarted the workspace
Redeployed a fresh BPM project.
But nothing changed?

Form layout is not updated after change

Hi, I have this problem with my interactive form in webdynpro abap:
I change layout of my form (change some texts, add buttons....), activate change without any error. But after showing form in my webdynpro application, there is NO change in layout of my form, still old layout is showing. Where should be error?
If I uncheck "Allow Form Rendering To Be Cached on Server" in Performance tab in Form Properties in layout editor in SE80, only ADS error is showed instead of my form in my webdynpro application.
Error from ADS is: com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.(200.101)
Many thanks for answer!
Edited by: Jiri Neuzil on Jul 14, 2009 10:39 AM

Hi,
I went tru all configuration settings, but ADS passed all tests from ABAP side, so I think everything is configured correctly. But I have found something in my Java server in web dynpro SAP Netweaver administration in Analysis -> Debug -> Logs and traces:
First error:
$$$/com/adobe/document/xmlform/msg.XFA=Error creating PDEFont for font MS-Mincho.
Second error:
$$$/com/adobe/document/xmlform/msg.XFA=Cannot render text ( ). See previous error.
Another error:
Error Log file "2009.07.14.111847SAFPXNEUZI02.pdf" written to C:\usr\sap\J2E\SYS\global\AdobeDocumentServices\renderErrorLog\errorFiles - but this file doesn't exists in specified directory
Another error:
Processing exception during a "Render" operation.
Request start time: Tue Jul 14 12:27:40 CEST 2009
com.adobe.ProcessingException: No <Render><Template> specified
Exception Stack Trace:
com.adobe.ProcessingException: No <Render><Template> specified
 at com.adobe.ads.operation.Render.validate(Unknown Source)
 at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
 at com.adobe.ads.request.Request.processOperations(Unknown Source)
 at com.adobe.ads.request.Request.process(Unknown Source)
 at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
 at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
 at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
 at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
 at SoapServlet.doPost(SoapServlet.java:51)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Many thanks for any answer!

Thumbnails do not update after changed are made in the raw module?

I am editing raw files in bridge. The changes that I have made in RAW do not transfer to the bridge thumbnail page when I leave the raw module. I can see that I have made changes by the little symbols for crop etc. in the thumbnail, but no live changes. Any suggestions?

Judy Lovins wrote:
I am editing raw files in bridge…
No, you're not.
Bridge is just a file browser, it doesn't open, edit or save any files at all. It just hands the file(s) to the appropriate application, whether that be Adobe Camera Raw (ACR), Photoshop, Illustrator, Acrobat, or even MS Word.
Check your Thumbnail preferences in Bridge Preferences.

Chart does not update after table changes

Simple X-Y chart using a data series from a table. The chart will not update after changing the table, for example after applying a filter. The chart will update if you close and reopen the file or go to Select Data on the chart. I use named ranges
because you can't use table nomenclature directly in the chart series definition.

Seems to update for me OK. You need to apply the entire unfiltered range to the chart before filtering. Did you do this or filter first and only apply the visible range?
If not the answer to you query then maybe I am not understanding the problem correctly so can you upload an example workbook?
Guidelines to post a workbook on OneDrive
Zip your workbooks. I prefer that you do not just save to OneDrive. (To Zip a file, in Windows Explorer Right click on the selected file and select Send to -> Compressed (zipped) folder.)
Go to this link. https://onedrive.live.com
Use the same login Id and Password that you use for this forum.
Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded and select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
Right click the file on OneDrive and select Share.
Do NOT fill in the form; "Select Get a Link" on the left side.
Click the button "Create a Link"
Click in the box where the link is created and it will highlight.
Copy the link and paste into your reply on this forum.
Regards, OssieMac

Why change pointers for master data, why not change message?

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Change pointers are getting stored in the tables BDCP and BDCPS. As SAP suggests these tables should be as small as possible. And Master data are not much frequently changed data.
As you compare with the transactional data, you need to change them many times in the real scenario. If we also process the transaction data via chnage pointer, these changes BDCP is getting more and more entries.
RBDCPCLR is the program used to process the change pointer. If you have much data in the BDCP table, this program will take much time to run.
So, we use the change pointers for the master data only.
Regards,
Naimesh Patel

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

Change communication structure for master data with direct update

Hi All,
I am having a problem with a change I want to make to some master data. I have added the attribute to the characteristic, but when I have gone to change the communication structure, its not possible (the add line button is greyed out)
I can see the new infoobject in the datasource/trans structure, but not in the comms structure (And yes it is in change mode ).
The master data uses direct update, and I have read that this causes some hassles in changing the comms str.
Can someone please give me some steps in doing this??
Thanks
Ryan

Hi Ryan,
Why u have nothing to map is ?
U r datasource trasfer structure from the source ssytem has nothing new ..
1)TO ur Info object u can only write the routing or give any formula or anythign like the trasfer rules oftions that have when u click on the IO icon..
2) Enhave the structure of the datasoruce that is getting from the R3 source system...
3) Replicate it ..
Then only u will be able to find the extra field at the Trasfer structure... to map to the IO which have been added..
hope it helps
regards
AK

BIA Master Data Index Not Updated After Change Run

Similar Messages

Maybe you are looking for