BIAC - goto 'Object overview'

Hi,
We installed the BIAC. The reports are running fine in the Portal.
If you use the right-click on the mouse (navigate) in the Portal, you can jump to:
- dataflow
- manage InfoCube 
- change InfoCube  (??)
- display InfoCube 
- object overview
I found out that this setting can be maintained with trx. RSBBS, but it still does not work.
I even tried to run program RSTC_CALL_TLOGO_VIA_RRI with the variant. Here we receive dumps.
Does anyone have an idea?
We looked for notes, but note 1052621 - Short dump "OBJECTS_OBJREF_NOT_ASSIGNED" while accessing RRI is already in the system.
Regards,
Jos.

Hi,
I solved it.
You need to activate mimes in trx. SICF.
Also perform the steps of document: "Enabling the SAP GUI for HTML with the ITS on 04.PDF".
It works nice: Using the Administrator workbench from the Web.
Regards,
Jos.

Similar Messages

  • Network - print object overview

    hello!
    i tried to print the object overview in a network (CN22, menu network->print), but the menu-entry is not selectable.
    how could i print this overview - is there some customizing missing? the status of my network is already released ...
    thanks!
    matthias

    Hi,
    I just went through the same problem. Don't know if it is still open.
    In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
    Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

  • COOIS - Saving Object Overview WIP Status layouts

    COOIS - Would like to be able to save the layout of an Object Overview - WIP Status report.  There is currently NO icons for "choose layout" , "export" or "views" available while in Object Overview.   I need to be able to create a report showing the header and operations list and this is the only way to get both on the screen at the same time.
    After I create the report layout with the fields needed, cannot save this format in any way.   The only thing I can do is print the report to a PDF file for others to view.  Would like to be able to save the format I have created and bring it up on screen anytime without have to create it from scratch each time.  This would prove a great resource if I only had the ability to save the layout. Especially when have a few 100 production orders.
    Thanks for all help in advance.
    Stan

    What happened to my other thread with 4 replies?
    Receiving help from Prasobh.
    Using COOIS:
    LIST    Object Overview
    Profile   WIP STATUS         may be company created.
    output is a 3 shades of blue and gray Production Order tree.
    shows  orders header, component, operation and confirmation lists at one time.
    Thanks

  • New Profiles for list Object Overview of COOIS

    Dear guru ,
    i run COOIS for list PPIOA000 (Object Overview)  Profile 000000000001 (Standard Profile)
    for production orders.
    In object selection view the system purpose for every object (operations , components ..) a profile  000001.
    I have tried in customizing but I haven’t found where can I add new profile for this list.
    Thanks in advance.

    Dear Cristiano
    Go to transaction COIS double click the Overall profile 000000000001     Standard profile
    Order infromation system: Overall profile detail screen appears
    Double click the Profile 000001agianst order headers
    Order infromation system:Object profiles Overviewl screen appears
    Add new entries to appear in the object selection screen.
    Note : If you even drill down you can change the fields to display respectively.
    Regards
    Soundararajan M,

  • Business Objects Overview

    I hope some one can help.  I'm trying to get my head around Business Objects and so far all I've done is get confused by all the various products, components and services.  Can anyone point me towards a good document/page which will explain each products differences and uses at a technical level?
    All the info I've found so far focuses on a particular product but doesn't explain how (or why) it relates to anything else.
    Thanks in advance.
    Pete

    The BusinessObjects portfolio contains many different tools for different usages. And some of the tools cross over each other a little bit.
    In a nutshell, most of the tools are surrounding the BusinessObjects Enterprise which is typically sold at CPU licenses. it contains 2 report development tools called Web Intelligence (short for WebI) and Desktop Intelligence (short for DeskI). WebI is a thin client and DeskI is a fat client. DeskI is supposed to be an interim tool to bring the users from legacy versions of BusinessObjects over to WebI. But since WebI still cannot do everything (although it is getting closer and closer) DeskI can do, people are reluctant to let go, and SAP BusinessObjects has to continue to carry this tool for now. If you are starting new, you can ignore DeskI as it will eventually be phased out.
    There is another reporting tool called Crystal Report which requires separate licenses. It is the most powerful and most popular reporting tool on this planet. But it requires good technical knowledge to use it. Crystal can connect to the data source either through a Universe (the metadata layer) or directly. WebI requires a Universe to connect, but it is more user friendly and it is meant to be used by power users and not IT developers.
    The BusinessObjects suite also provides a pseudo-reporting/visualization tool called Xcelsius, which can present information graphically. It is very easy to use and it is supposed to display information at very high level view for quick "health-check" of your organization. It can also be used for "what-if" analysis. But very often, people tend to dump too much data into the tool to make it unusable.
    The BusinessObjects portfolio also include numerous miscellaneous tools for different purposes and usage. But what I have provided to you above should give you a good starting point.
    Hope this helps.

  • Adapter object overview Transaction R3AC3

    Hello,
    This is regarding the R3AC3 transaction.
    For the object name DNL_CUST_BASIS3 when I choose the site R/3 the target site CRM and consumer CRM is automatically coming up. Moreover it is greyed out.
    Really I want the consumer as "SRM".
    Is there an option of changing it anywhere else?
    Regards
    J

    Did you check the tables CRMCONSUM for example?
    Try to this way:
    /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    Rgs,
    Pedro Marques

  • IH08 : No objects were selected after vla

    Hi,
    I am working on IH08,
    1.     gave input as
    Class u2013 002
    Class type u2013 NOSTOLAITTEET (Got the class type from IE02 for the equipment) and
    2.     When I click on valuation button pop up comes, Input for the field PRODUCER is entered as test and click on enter
    Green tick mark appear next to the valuation tab
    3.     Gave  function location and execute the I get msg as u201CNo objects were selectedu201D
    But when I donu2019t go to valuation meaning having Red Cross mark at valuation button and then click in F8
    Am able to view the equipment
    But according to the requirement I should first evaluate and then select he equipment.
    Please help.

    In IH08, you are basically selecting a equipment with Class type 002, class NOSTOLAITTEET, and char value PRODUCER. Hence for the the value entered for char is not correct. So you are not getting any o/p. Pl check IE02, enter a equipment and then GOTO----> class overview and check which class is assigned and chat value. If you enter tis combination in IH08, you will get the o/p.
    hope it is clear

  • Moving an object from $tmp

    Hi Experts,
    Suppose i saved an object by mistake in $tmp. How to move this object to quality.
    plz give solution for this

    Hi Lokesh,
    Well everybody said the right thing i.e. if you want to transport any object from $tmp,you have to go to se38 and than-
    1.Click on Goto->Object Directory Entry.
    2.Click on change i.e. pencil icon and then,
    3.Give your package name in the package option.
    4.After that you are provided one transport request by the system.
    5.Click on continue.
    Through this way you can make the object transportable.
    But may be sometimes you want one object only local i.e. not to transport($tmp),and mistakenly you make that object transportable.So in order to make it again local,you have to do following things:
    1.Go to se09 or se10.
    2.Display all the transport request made by you.
    3.Now find your transport request in all these.
    4.After that you find your program name in them.
    5.Now delete that program.
    6.After that you go to se38 and do the same procedure as do in your solution i.e. moving a object from $tmp.
    7.Give your package name here as $tmp.
    Through this way you can again make a object local.
    If you don't follow the steps 1-5 than you are not able to make a object loacl again,because the object is locked by the transport request.
    Regards.

  • Help on PO13 ---- "SAP Organizational Object"  in the table control.

    Hi All,
    Can some one tell me details on or where to read from ..... PO13 -> "SAP Organizational Object"  in the table control.
    For eg if you go to PO13 -
    > "Relationships"  in the table control you get all the hierarchy details of an employee (eg: reports to, belongs to, holder ...etc.).
    Similarly what would you get when u go to PO13 -
    > "SAP Organizational Object" -
    > Overview  in the table control. Is it something to do with product hierarchy ..... am not very sure. I am working on a sandbox on a trial workflow for learning purpose and I do not have it configured so that I can look for some samples.
    I understand I am not very clear about my question, but still I hope if someone can answer.
    Thanks,
    Anu.

    An object type is a generic description of an object.
    The object type definition determines the object type by specifying its various components.
    An object type is defined by its
    Basic data, such as name, created by...
    Key fields, which give each object a unique ID
    Attributes as the characteristics of an object
    Methods with parameters and exceptions as activities that can be performed for an object
    Events, which describe any changes that occur
    Implementation in the program code
    After assigning Object Type, you should click on Assign Key.. and assign respectuve Object ID.
    This will create link between Object in HR-OM with Object of other modules like Sales, Vendor, Purchase etc.
    Note sure, how this is used in Workflow... i never worked on workflows.
    Regards
    ...SAdhu

  • DTW Business Objects

    Hi Experts,
    Some one have list of business objects used for DTW?. How to find out the which business object is for what.
    I want to know the details about updating Business Partner Opening Balance with bill split ups, G/L Account opening balance, items opening balance with serial number details.
    Please suggest.
    Thanks in advance.

    Hi,
    kinldy use single query for posting in the forum.
    Regarding the business objects .
    In the SDK help center(By default path:Start-Programs-SAP Busniess One-SDK-SDK Help center)
    Under contents tab-DI API-DI API objects overview-business objects list.
    Hope this helps.
    NB:Before posting new thread for opening balance kindly search the form for the same you will have good view.

  • Why when I create a object in system automaticlly store in $TMP?

    Hi, all
    As title, when I create a object in my quality system , always automatically store the object in the $TMP,
    I have to modify it from menu Goto->Object Directory Entry-> Change Package.
    I hope when I crate a object automatically store in the package NOT $TMP.
    Edited by: xuehui li on Jul 9, 2010 4:50 AM

    Hi,  But when I create a new DTP NO asking me let me create or select a place to store.  Just automatically store in $TMP immediately!
    So I have to go to menu 'Goto-> Object Directory Entry->' modify the package from $TMP to my working package.
    so it is very strange!  I think for sure there is somewhere to set up this option to DONOT store at $TMP automatically instead of asking for me store in where.
    Edited by: xuehui li on Jul 9, 2010 5:20 AM
    Edited by: xuehui li on Jul 9, 2010 5:22 AM

  • Local Object Program Transport to Request

    Hi Friends,
    I was created one "Z " Report  in local object package and Created new Request . But I do not know how to transport local object package to Request package.
    Please give me clear information,
    Thanks
    Saravanan R

    Hi Saravanan,
    open your code in SE38.
    then in menu bar click GOTO->OBJECT DIRECTORY ENTRY
    it will now show you the current package which y\would be $TMP for you.
    change it to a package. click F4 on that field if you have a Z package better use it.
    then when you click save it will ask you a transport request number. either you can select a transport request which you have created before or you can create there it self clicking the create button.
    after the TR is assigned, activate the code again.( as now it will be inactive status)
    now you can release the TR from TCODE: SE01 or SE09 or SE10. for releasing you have to release the task first and then the TR.
    after it is released you can import it from the server to which the target has been set.
    Hope this helps
    Somu

  • How to change local object to own dev class

    in the table maintenance generator my object is stored under local object how to change loacal object to our own development class and how to change the function group in table maintenance generator

    Hi Narendra,
    In order to change the function group, you need to delete the table maintenance generator first.
    Then you create a new table maintenance generator.
    To change the package of your object :
    1. for Function Group
       - tcode SE80
       - right click on the Function Group
       - choose : More Function - Object Directory Entry
    2. for Table / Function Module
       - tcode se11 / se37 / se38
       - in the upper menu : choose : Goto -- Object Directory Entry
    Hope this helps.
    best regards

  • Creating TP request to an object stored under $tmp

    Hi , i created a program in $tmp .
    now i how can i create transport request to that object.
    can i do like this :
    Going to attributes , and change the package .
    plz clarify this .
    Thanks & Regards
    suresh

    Hi
    You can create new transport reuqest but 1st u have to change the package for change of package
    follow this
    Se38
    Give ur program name
    on the menu bar Goto-->Object Directory Entry --> Change then give ur package name starting with Z
    Reward all helpfull answers
    Regards
    Pavan

  • Re: converting local object to a package

    hi to all,
    i developed asmartform and saved as alocal one.
      but now i want it to assign to a package.
    thanks for ur reply.
    is there any way to change the name of the existing smartform without copying?
    help me in this regard
      thanks
      sun
    Message was edited by: sun deep

    Hi,
    From SMARTFORMS initial screen, goto--> object attributes, now go to the change mode and enter your package name. Save it , you`r done.
    Reward if helpful.
    Regards

Maybe you are looking for