BIC Mapping tool Error

Hi,
Hope you have define your FlatFile strucute first and exported to local directory and then generated the XML messsage for the same...
after this generated the mapping for the conversion from FlatFile to CSV using CreateEDItoXML instead of XMLtoEDI...
for the mapping provide input as your generated CSV and XML ...
Cross check the process you followed for generating the same..
Hope this gives the needed info for generating mapping..
Regards
Rajesh

Marking it as solved. We are not using BIC tool anymore.

Similar Messages

  • Can SeeBurger BIC Mapping tool automatically remove Delimiters?

    Hi all,
    When we map IDOC's to EDI X12 messages using the SeeBurger BIC Mapping tool, we sometimes have delimiters occur in fields such as name or address. We are using the setDestinationDelimiter and have changed our delimiters so this occurance is rare. However the problem may still occur. This causes an invalid message to be passed to our partner.
    One option is to use XI mapping and the replace function on each field however this is cumbersome and not the ideal solution.
    Is there a way to automatically remove Delimiter characters from fields as part of the BIC Mapping.
    Cheers,
    John

    Hi Satish,
    Thanks for re-iterating the problem. You are absolutely right that this does cause an invalid message.
    Also thanks for your suggestion regarding asking business not to enter the data, this has been done and as stated the occurences of these delimiters in the fields will be low, usually due to user error.
    We still however want to cater for these occurrences and prevent an invalid message being sent to the partner.
    I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works. Anyone out there who can help?
    Cheers,
    John

  • Design approach help : BIC Mapping Tool Conversion

    Hi All,
    Design approach:
    we know that BIC mapping tool can be used for EDI to XML conversion. also i know that its a Any to any converter.
    But we prefer EDI to EDI XML conversion only via this tool and do the mapping in SAP PI as it would be easy to do mapping change if any in PI than redeploy the mapping in module location every time.
    My question is:
    we know that sender file adapter supports FCC for max of 3 hierarchy levels.
    Can we make it a practice of accepting requirements in SAP PI which has complex Flat file structure (more than 3 levels). and use BIC mapping tool to convert the Complex flat file Structure (with more  than 3 levels) into PI required format and proceed with the mapping and Configuration. (Note: hear the assumption is that the organisation has BIC Mapping tool procured for some EDI message scenario's ).
    or is it best practice to ask the Source system to supply flat files strictly in Header,with 1 line item format?
    Suggestions would be deeply appreciated.
    Warm Regards,
    Senthilprakash

    >
    > if you are thinking of using only BIC mapping tool for converting flat file to xml and want to proceed with normal configuration without using BIC modules then it is not feasible.
    >
    Dear Suresh,
    I am very well aware of that. we have Seeburger SFTP adapter installed in our PI system. and for EDI conversion we use BIC for converting to XML and deploy the module in the adapter level.
    Now my question is that: weather is it the rite way to start accepting requirement from source which has complex flat file structure (non edi messages) and using BIC module in adapter to convert it into XML and proceed with configuration or better to ask the source system to send the flat file in a format which is accepted by our file adater FCC.
    what are the drawbacks/bottlenecks we see in using BIC module for converting non EDI complex flat files into XML format? in PI
    Regards,
    Senthilprakash.

  • IDoc to File[EDI] using seeburger BIC Mapping Tool

    Hi Gurus,
    I'm having a scenario of IDoc to EDI FIle, I'll be using IDoc DESADV.DELVRY03.ZDELVR0X; Kindly advise steps needed in BIC Mapping Tool. I've already referred to this post /people/dijesh.tanna/blog/2008/05/25/sap-pixi-content-conversion-using-generator-mapping-functionality-of-seeburger-part-1 but still can't get it right.
    Thanks.

    Thanks a lot experts :D....
    I'll be using a file adapter for my scenario..
    Any Idea on what Seeburger BIC mapping module should I use?
    am I just use the ff module?
    Module u2013 Processing Sequence                                   
    Number     1     Name     localejbs/CallBicXIRaBean     Type     Local Enterprise Bean     Module Key     bic
    Number     2     Name     localejbs/CallSapAdapter     Type     Local Enterprise Bean     Module Key     exit
    Module u2013 Module Configuration                         
    Module Key     bic     Parameter name     destSourceMsg     Parameter value     MainDocument
    Module Key     bic     Parameter name     destTargetMsg     Parameter value     MainDocument
    Please advise.
    Thanks.
    Edited by: Devilbatz on Dec 8, 2010 8:31 AM

  • Need to get trail Spacing using BIC Mapping tool

    Hi Experts,
    There is a stranage scenario were i need to get an output in a text file using trail spacing.
    for example here is the input for the BIC Mapping
    <DK03_SEG> ***************                     77700000000463518500000030000000202820100226 *********     </DK03_SEG>
    has at the starting and ending of the message there is a empty space.
    but when i run BIC Mapping i am getting the out put in this fashion
          *********77700000000463518500000030000000202820100226
    only could get the spaces in the start of message at the end BIC is trimming the spaces at the end .
    how this  can be achieved.
    @@ consider * as spaces
    Thanks
    Sampath

    Hi Seven,
    I have tried that option but unable to get the required output. Any other option were it can be achieved.
    Thanks
    Sampath

  • BIC integration tool

    Going to support EDI interface which uses Seeburger AS2 adapter either at sender or receiver side.I have few doubts on BIC module:
    1.Do i need to install BIC tool on my laptop or it is a web based tool which i can access from seeburger workbench?
    2.For all the edi conversion using Seeburger do we need BIC module to convert messages from EDI to XML or from XML to EDI?
    3.why we need to do message mapping again if we had already done BIC mapping?
    thanks in advance.

    Got to the point answer from Shradha, Posting this thread again becouse earlier posted with differen used by mistake.
    Hi,
    1.Do i need to install BIC tool on my laptop or it is a web based tool which i can access from seeburger workbench?
    Yes you need to install BIC mapping tool in your laptop to do the mappings.
    AM Plain Text Help 
    2.For all the edi conversion using Seeburger do we need BIC module to convert messages from EDI to XML or from XML to EDI?
    Yes for all EDI conversion using Seeburger you need BIC tool. But if you have some standard mapping already given by Seeburger than you dont need BIC tool, you can directly use those mappings. Remember standard mapping will start with name SEE*
    3.why we need to do message mapping again if we had already done BIC mapping?
    BIC mapping tool is used to convert EDI to XML and vice versa. Think about a scenario when you need to convert an IDOC to EDIFACT format.
    Than first you have to do 1:1 mapping in PI where you will convert IDOC to EDIXML and than use BIC mapping tool to convert EDIXML to EDIFACT file.
    I hope above answers will help you.
    Regards,
    Shradha

  • Error in Seeburger BIC Mapping

    Hi all,
    I am working on Seeburger BIC Mapping Designer.
    As i am starting off with it, i have planned to do a very simple scenario File to file.
    Source would be an XML and target also would be an xml.
    Compilation is fine, but while converting I am gettuing an error
    "[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[4(read Segment : KA\)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
    DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort
    <<ErrorStreamEnd>>
    Conversion error "
    Please let me know what should be done.
    Even I have enabled SetIngnoreCRLF option in the source options.
    Cheers,
    Karthick

    Hi Karthick,
        Where do you get this error?
    In BICMD ?
    Have you created the E2X and/or X2E mapping programs in BICMD tool?
    Test it locally in the tool intself before deploying the mappings to XI server.
    Follow these steps to create a 1;1 mapping for XML to EDI and EDI to XML conversion program:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948;jsessionid=(J2EE3414900)ID2060961950DB01298938248398894809End
    Regards,
    Ravi

  • Error in the Seeburger-BIC mapping designer

    Hello,
    I have changed the source structure of my XML journal. I have added few extra fields to the source.
    After the change my mapping started giving me errors like below
    " [Error:ID=1017;LEVEL=1] BICMapping: runMapping() FATAL ERROR: null
    [Description:ID=1017] BICMapping: FATAL ERROR: Internal Fault. Class could not be load or instatiated. Check Installation, access rights.
    [Error:ID=not set;LEVEL=1] null"
    The strange part is the error does not occur always.
    There are two mapping with the same source structure . Say A and B
    Out of these A works perfectly fine but B has a problem.
    One more strange thing that I observed is.:If I run mapping B and if it goes in error , it can be redecided in the following way to be successful
    1.Run mapping B and it goes to error.
    2.Now run mapping A .It will be successful
    3.Now redecide the mapping B that you ran in step1 now even B goes on success.
    If anyone of you know the reson for such kind of behaviour , please reply to my post.
    Regards,
    Aruna

    Hi,
    If possible execute the mappings in BIC designer tool instead in PI...
    if still some error occurs check the source data is as expected or not also the new line characters handled properly...
    probably error can be due to new line handlings..
    HTH
    Rajesh

  • Error in BIC mapping

    Hello Pals,
                                 Am using BIC mapping for converting a flat file to xml, am able to convert all formats of flat file but BIC mapper is throwing error if my input file has characters like ä , Ü and § . Upon  removing the special characters from my input file, BIC mapper is giving the desired xml output file, If special characters are kept in input file, it throws error.
    I tried to change the BIC data type for the field from A to AN, but nothing seems to be working...
    Kindly help
    Regards
    Vijay

    Hi,
          Your characters looks like umlaut characters ..if yes then there is an option for handling them by  specifiying the function mode  setSourceUmlautMode  to ON at child level mapping or at source mapping similarly at target too..
    if not then you need to look for encoding which can be set with the option setXMLEncoding/SrcEncoding...options..
    HTH
    Rajesh

  • BIC mapping error with Text as trasnfer mode & File type

    Hi guys,
    I am using ftp adapter in my sender channel and also using BIC mapping in the sender side.
    When i specify "Binary" as my transfer mode as well as File type, It is working fine.
    When i specify "Text" as my transfer mode as well as File type, i am getting the below BIC mapping error. According to client requirement i am supposed to use Binary. Can anyone help me on this.
    SEEBURGER BICXIADAPTER --- CONVERSION ERROR ---Error: [Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[12(read Segment : BILLINGHEADER)]: caught ReadingException: only whitespaces as fill characters allowed!, Trace: [com.seeburger.jucon.dochandler.util.WrongFormatException: only whitespaces as fill characters allowed! at com.seeburger.jucon.dochandler.inhousereader.InhouseSegmentReader.readNextSegment(InhouseSegmentReader.java:384) at com.seeburger.jucon.dochandler.inhousereader.InhouseSegmentReader.readNextSegment(InhouseSegmentReader.java:193) at com.seeburger.jucon.dochandler.InhouseDocReader.readNextSegment(InhouseDocReader.java:2399) at com.seeburger.jucon.dochandler.InhouseDocReader.moveNext(InhouseDocReader.java:1818) at com.seeburger.jucon.mapping.E2X_DT_BILLINGDATA_2.main(E2X_DT_BILLINGDATA_2.java:991) at com.seeburger.jucon.mapping.Mapping.run(Mapping.java:2313) at com.seeburger.jucon.seebicapi.BICMapping.runMapping(BICMapping.java:1636) at com.seeburger.jucon.seebicapi.BICMapping.run(BICMapping.java:2386) at com.seeburger.jucon.seebicapi.BICMapping.startSyncMapping(BICMapping.java:1343) at com.seeburger.bicxiadapter.CCIInteraction.convert(CCIInteraction.java:1167) at com.seeburger.bicxiadapter.CCIInteraction.convertCalledFromModule(CCIInteraction.java:873) at com.seeburger.bicxiadapter.CCIInteraction.execute(CCIInteraction.java:294) at com.seeburger.bicxiadapter.module.CallBicXIRaBean.process(CallBicXIRaBean.java:363) at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:102) at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292) at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103) at com.sap.aii.adapter.file.File2XI.send(File2XI.java:3672) at com.sap.aii.adapter.file.File2XI.processFtpList(File2XI.java:2408) at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java:630) at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:513) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:219) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) ] DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort

    Hi Pratichi,
    in my point of view having text as the file type,the file will be having characters that are used for Segment separators or Element separators ( like space ) in the standard EDI format message.  Hence it is throwing exception in X2E mapping. It is just my point of view but not sure.
    Thanks,
    Shabbir.

  • Seeburger BIC mapping error(on changing mandatory fields)

    Hi Experts,
    I am working on IDOC to EDIFACT file scenario with seeburger.
    Earlier my end to end scenario was working fine. I got a requirement to change all the mandatory fields of segment NAD into non mandatory field. To acheive this i changed my Seeburger BIC mapping and target XSD in PI. After this process i create .sca file and ask basis to upload it.
    But after deployment i am getting error in communication channel where i am using BIC mapping. The error is message is quite big, still i am attaching a part of it. Please help
    Message processing failed. Cause: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: BICMapping: runMapping() FATAL ERROR: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) Stacktrace: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:95) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105) at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336) at sun.nio.cs.StreamEncoder$CharsetSE.implWrite(StreamEncoder.java:395) at sun.nio.cs.StreamEncoder.write(StreamEncoder.java:136) at java.io.OutputStreamWriter.write(OutputStreamWriter.java:191) at java.io.BufferedWriter.flushBuffer(BufferedWriter.java:111) at java.io.BufferedWriter.write(BufferedWriter.java:212) at java.io.Writer.write(Writer.java:126) at com.seeburger.jucon.dochandler.util.GrammarFileWriter.write(GrammarFileWriter.java:262) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:234) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:390) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiDocWriter.write(EdiDocWriter.java:367) at com.seeburger.jucon.dochandler.InhouseDocWriter.flush(InhouseDocWriter.java:884) at com.seeburger.jucon.mapping.Mapping.run(Mapping.java:2429) at com.seeburger.jucon.seebicapi.BICMapping.runMapping(BICMapping.java:1724) at com.seeburger.jucon.seebicapi.BICMapping.run(BICMapping.java:2518) at com.seeburger.jucon.seebicapi.BICMapping.startSyncMapping(BICMapping.java:1415) at com.seeburger.bicxiadapter.CCIInteraction.convert(CCIInteraction.java:1201) at com.seeburger.bicxiadapter.CCIInteraction.convertCalledFromModule(CCIInteraction.java:911) at com.seeburger.bicxiadapter.CCIInteraction.execute(CCIInteraction.java:313) at com.seeburger.xi.api.cci.impl.nw71.SeeXIInteractionProxy71.execute(SeeXIInteractionProxy71.java:86) at com.seeburger.bicxiadapter.module.CallBicXIRaBean.process(CallBicXIRaBean.java:384) at com.seeburger.xi.api.module.impl.nw71.SeeModuleAdapter71.process(SeeModuleAdapter71.java:78) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal
    java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:169) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:266) DESCRIPTION: BICMapping: FATAL ERROR: Internal Fault. Class could not be load or instatiated. Check Installation, access rights. Last error: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes)
    Regards,
    Shradha

    Hi,
    Even I faced a Similar problem...
    1) make sure that the size of the data that is coming to BIC map is not larger than the size defined in the Source field (Check In BIC and SAP XI/PI map.
    2) Make sure id any other seeburger mapping are working fine , This is because you have to deploy the file in form of Active mapping.sca in SAP XI/PI after the changes are made on BIC side.
    3) Check the Adapter Engine Cache ...
    Hope this helps..
    Regards,
    Sainath Chutke

  • Mapping and Error handling in Seeburger Adapters ?

    Hi,
    1.   In B2B integration part of PI.Whats the way of doing mapping in XI mapping editor and error handling in the mapping ?
    2. Do you think SEEBURGER BIC mapping designer is must for developing maps ? cant we develop same maps in XI mapping editor?
    Thanks and regards,
    Ram.
    Edited by: Ramakrishna kopparaju on Sep 30, 2008 12:27 PM

    Whats the way of doing mapping using seeburger adapters
    The standard mappings are part of Seeburger Suite and if any additional mapping has to be accommodated, then custom mapping could be developed in Seeburger BIC Mapper tool. This has to deployed on adapter engine then. The other mapping is the normal XI mapping (message, java, xsl) which could be performed based on business logic.
    error handling in the mapping ?
    The easiest way is to raise Alert based on the errors in mapping.
    Regards,
    Prateek

  • HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

    I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

    If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
    Boot  into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as  Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
    Now go to the Restore tab and reinstall from your backup.

  • Seeburger BIC Mapping deployment issue in PI 7.1

    Hi experts
    We have upgraded from XI 3.0 to PI 7.1 and seeburger is also upgraded to  a compatible version.(2.x).
    Mappings_user.sda was used in 3.0 environment.
    But we are not able to deploy the same in 7.1. I think sda format is not supported in 7.1.
    Is there any way to convert .sda to .sca and deploy?
    Or how can we generate a compatible deployment file for 7.1?
    I have tried using BIC mapping designer,but it shows the option for .sda and .jar only.
    Thanks in advanceDhanish Joseph

    Hi
    I have installed BICMD  632 version and imported .BICMD project file.
    Then assigned sda/sca number to it and created deploy file.(Mapping_user00.sda).
    Then installed this in PI system using JSPM.
    I have tested allmost all the mappings successfully except one in PI system.(EDI 990 message).
    When i send data to PI  data comes to channel and it shows conversion error. But detailed information not available.
    In seeburger monitoring  the message goes to recovery mode.
    I have used the input 990 X12 and tested in Seeburger BIC MD. And there it is success!!!!!! So i am confused what is happening when it comes to PI system.
    I faced some issues>>>
    1.  while importing project file into BIC MD it asked for apply some autocorrection  for one map.(different than this). I have clicked on cancel
    2. When i assigned SDA number to my project i have selected 2.1.0  SDA version( 1.8.0 option was also there).
    Your prompt reply is greatly appreciated .
    Thanks

  • Ruler tool error 48 on XP CS5.5

    Re: Ruler Tool- Error 48: File or folder does not exist
    i'm getting the exact error another posted on the Mac forum but I'm using Windows XP with CS5.5
    error 48: file or folder does not exist
    line: 31
    -> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
    Preferences have been restored to default
    how do we get support for this error?
    system info:
    Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x32
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: Intel CPU Family:6, Model:13, Stepping:8 with MMX, SSE Integer, SSE FP, SSE2
    Physical processor count: 1
    Processor speed: 1729 MHz
    Built-in memory: 2047 MB
    Free memory: 1205 MB
    Memory available to Photoshop: 1658 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 900, right: 1440
    Video Card Number: 1
    Video Card: ATI MOBILITY RADEON X300
    Driver Version: 6.14.10.6561
    Driver Date: 20050804101018.000000-000
    Video Card Driver: ati2dvag.dll
    Video Mode: 1440 x 900 x 4294967296 colors
    Video Card Caption: ATI MOBILITY RADEON X300
    Video Card Memory: 64 MB
    Serial number: 92628485317819668197
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\
    Temporary file path: C:\DOCUME~1\e\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 88.5G, 42.8G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2010/12/13-23:37:10   64.449933   64.449933
       adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
       AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0  
       AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
       AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
       AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
       AdobePIP.dll   Adobe Product Improvement Program   5.5.0.1265  
       AdobeXMP.dll   Adobe XMP Core   5.0   64.140949
       AdobeXMPFiles.dll   Adobe XMP Files   5.0   64.140949
       AdobeXMPScript.dll   Adobe XMP Script   5.0   64.140949
       adobe_caps.dll   Adobe CAPS   4,0,42,0  
       adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       AFlame.dll   AFlame 2011/01/10-23:33:35   64.444140   64.444140
       AFlamingo.dll   AFlamingo 2011/01/10-23:33:35   64.436825   64.436825
       AGM.dll   AGM 2010/12/13-23:37:10   64.449933   64.449933
       ahclient.dll    AdobeHelp Dynamic Link Library   1,6,0,20  
       aif_core.dll   AIF   2.0   53.422628
       aif_ogl.dll   AIF   2.0   53.422628
       amtlib.dll   AMTLib   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       amtservices.dll   AMTServices   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       ARE.dll   ARE 2010/12/13-23:37:10   64.449933   64.449933
       asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1  
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/01/10-23:33:35   64.436825   64.436825
       AXEDOMCore.dll   AXEDOMCore 2011/01/10-23:33:35   64.436825   64.436825
       Bib.dll   BIB 2010/12/13-23:37:10   64.449933   64.449933
       BIBUtils.dll   BIBUtils 2010/12/13-23:37:10   64.449933   64.449933
       boost_threads.dll   DVA Product   5.0.0  
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2010/12/13-23:37:10   64.449933   64.449933
       data_flow.dll   AIF   2.0   53.422628
       dvaadameve.dll   DVA Product   5.0.0  
       dvacore.dll   DVA Product   5.0.0  
       dvaui.dll   DVA Product   5.0.0  
       ExtendScript.dll   ExtendScript 2011/01/17-17:14:10   61.452840   61.452840
       FileInfo.dll   Adobe XMP FileInfo   5.0   64.140949
       icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt42.dll   International Components for Unicode   4, 2, 0, 0  
       icuin42.dll   International Components for Unicode   4, 2, 0, 0  
       icuuc42.dll   International Components for Unicode   4, 2, 0, 0  
       image_flow.dll   AIF   2.0   53.422628
       image_runtime.dll   AIF   2.0   53.422628
       JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
       libeay32.dll   The OpenSSL Toolkit   0.9.8g  
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1263  
       MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4137  
       msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4137  
       msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4137  
       onOneToolbox2.dll   onOne Toolbox2 Dynamic Link Library   2.2.0  
       OnOneWidgets.dll    OnOneWidgets dll   2.5  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS5.1   CS5.1  
       Plugin.dll   Adobe Photoshop CS5   CS5  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   2.5.0.232  
       PSArt.dll   Adobe Photoshop CS5.1   CS5.1  
       PSViews.dll   Adobe Photoshop CS5.1   CS5.1  
       SCCore.dll   ScCore 2011/01/17-17:14:10   61.452840   61.452840
       shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300  
       ssleay32.dll   The OpenSSL Toolkit   0.9.8g  
       tbb.dll   Threading Building Blocks   2, 1, 2009, 0201  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
       WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
       wu3d.dll   U3D Writer   9.3.0.113  
    Installed plug-ins:
       3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Accented Edges 12.0
       ADM 3.11x01
       Angled Strokes 12.0
       Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Bas Relief 12.0
       BMP 12.0.2
       Camera Raw 6.4.1
       Chalk & Charcoal 12.0
       Charcoal 12.0
       Chrome 12.0
       Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Color Halftone 12.0.2
       Colored Pencil 12.0
       CompuServe GIF 12.0.2
       Contact Sheet II 12.0 (12.0x001)
       Conté Crayon 12.0
       Craquelure 12.0
       Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Crop and Straighten Photos Filter 12.0.2
       Crosshatch 12.0
       Crystallize 12.0.2
       Cutout 12.0
       Dark Strokes 12.0
       De-Interlace 12.0.2
       Dicom 12.0
       Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Diffuse Glow 12.0
       Displace 12.0.2
       Dry Brush 12.0
       Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Embed Watermark 4.0
       Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Extract 12.0 (12.0x001)
       Extrude 12.0.2
       FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Fibers 12.0.2
       Film Grain 12.0
       Filter Gallery 12.0
       Fresco 12.0
       Glass 12.0
       Glowing Edges 12.0
       Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Grain 12.0
       Graphic Pen 12.0
       Halftone Pattern 12.0
       HDRMergeUI 12.0
       Histogram 1, 0, 0, 0
       HistogramCurves 1, 0, 0, 0
       ICO (Windows Icon) NO VERSION
       IFF Format 12.0.2
       Ink Outlines 12.0
       JPEG 2000 2.0
       Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Lens Blur 12.0
       Lens Correction 12.0.2
       Lens Flare 12.0.2
       Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Liquify 12.0.1
       Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mezzotint 12.0.2
       Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mosaic Tiles 12.0
       Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Neon Glow 12.0
       Note Paper 12.0
       NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Ocean Ripple 12.0
       OpenEXR 12.0.2
       Paint Daubs 12.0
       Palette Knife 12.0
       Patchwork 12.0
       Paths to Illustrator 12.0.2
       Pattern Maker 12.0 (12.0x001)
       PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Photocopy 12.0
       PhotoKit 1, 2, 4, 0
       PhotoKit Capture Sharpener 1.2.6
       PhotoKit Capture Sharpener Expert 1.2.6
       PhotoKit Color 2 2, 0, 1, 0
       PhotoKit Creative Sharpener 1.2.6
       PhotoKit Output Sharpener 1.2.6
       PhotoKit Preview Helper 2.0
       PhotomergeUI 12.0 (12.0x001)
       Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       PhotoTools 2.5 2.5.5
       PhotoTools 2.5 Batch 2.5.5
       PhotoTools 2.5 Hidden NO VERSION
       PhotoTools 2.5 Hidden NO VERSION
       Picture Package 12.0 (12.0x001)
       Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Pinch 12.0.2
       Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       PixelGenius Toolbox 2, 0, 0, 0
       Plaster 12.0
       Plastic Wrap 12.0
       PNG 12.0.2
       Pointillize 12.0.2
       Polar Coordinates 12.0.2
       Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Poster Edges 12.0
       Radial Blur 12.0.2
       Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Read Watermark 4.0
       Reticulation 12.0
       Ripple 12.0.2
       Rough Pastels 12.0
       Save for Web & Devices 12.0
       ScriptingSupport 12.1
       Send Video Preview to Device 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Shear 12.0.2
       Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Smart Blur 12.0.2
       Smudge Stick 12.0
       Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Spatter 12.0
       Spherize 12.0.2
       Sponge 12.0
       Sprayed Strokes 12.0
       Stained Glass 12.0
       Stamp 12.0
       Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Sumi-e 12.0
       Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Targa 12.0.2
       Texturizer 12.0
       Tiles 12.0.2
       Torn Edges 12.0
       Twirl 12.0.2
       U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Underpainting 12.0
       Vanishing Point 12.0
       Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Video Preview 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Water Paper 12.0
       Watercolor 12.0
       Wave 12.0.2
       Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Web Photo Gallery 12.0 (12.0x001)
       WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Wind 12.0.2
       Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       ZigZag 12.0.2
    Plug-ins that failed to load: NONE
    Flash:
       onOne
       Mini Bridge
       Kuler
       Access CS Live
       CS Review
    Installed TWAIN devices: NONE

    no such subdirectory: C:\Program Files\Adobe\Adobe Photoshop CS5\Presets\SCRIPTS
    Message was edited by: eliz926
    ANSWER: out of the box installation on an XP Dell laptop resulted in NO installation errors but a missing subdirectory - or the in-application updates removed subdirectories.
    re-installing the complete application installed the missing subdirectories.
    hopefully those with the same error now have something to check on with their application directory structure.  there is at least one other who has this error on a Mac.
    thanks to all who responded.
    e
    Message was edited by: eliz926

Maybe you are looking for

  • When am i entitled to have my macbook exchanged for a new one?

    I bought my Macbook PRO 17 inch last Sept4, 2007 in hongkong. July 8, 2008, it froze. A portion of the screen displayed a pixellated image and all the proggrams, including the Tiger OS froze. after i hardbooted, it worked. but in the next 20 minutes

  • "Merge with values" not merging values

    Hello, I have quite a problem with LDAP provisionning and LDAP groups management: - "user1" and "user2" already exist in the LDAP directory and are members of "group1" - I create user1 in IDM and give him the LDAP ressource => he gets linked correctl

  • How can I get rid of a second App Store ID that keeps popping up after I enter mine?

    My son borrowed my iPad for a road trip. I deleted his ID in settings but it won't go away! Anybody?

  • Alert message through the sdk.

    hi. plz have a look on Attached image.. i want to send one alert to the particular user. i am able to send it.. but here i have  a small  requirement. Normally alert messages are Working on queries.. suppose select docentery from ordr where docsttus=

  • A few how to questions on CaptureDevice: Microsoft.Devices

    Hi. I'm using CaptureDevice to capture videos ( vcDevice = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice(); 1. How to I set the recording resolution? (I tried setting the canvas/videobrush resolution but the playback is still normal) 2. How