Bill Passing to be done on the rate which is valid on the Goods Receipt Dat

Dear All,
          My client has a very valid requirement which I am unable to provide. My client is basically a real estate company which is responsible for building. So the purchase cement, Paint etc. as raw material. The market rate of these raw materials varies almost everyday. So they maintain info record for material vendor combination. Then every day they change the price in percentage in MEKP.
          So suppose someone has created a PO on today or 20th July. So system will pick the value from info record whatever is maintained there say Rs10/- . Then suppose on 22nd July market price change to Rs15/- . So they will change the value in info record. Goods receipt against this PO is done on 23rd July .
           After GR they will do Bill passing on say 23rd itself. But system will take Rs10/- as this is the PO value. But my client wants it should take Rs15/- as this is the market price on Goods Receipt Date .
          My question : Can this be done ? Can Bill passing amount take the value from info record condition rate as on the date of goods receipt ?
          Please Reply ...
Regards
Abhijit

Dear,
               That is a goods point . But is there any provision that this updated price will reflect in MIRO automatically or by a single click . Because anyhow they can change the amount manually in MIRO . But accounts person should not have the authorisation to change the price during MIRO .
               Price should come from price master or a single click somewhere in MIRO which will update the price to market price .

Similar Messages

  • HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

    I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid.  I cannnot delete the account because "find my iphone" wants the password linked to this old account.  But when i go into the find my iphone app it is using my corect Apple ID.  How do i fix this?

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)?  That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both?  Or more?
    I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
    Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details.  The BT email client set-up starts here.

  • Substitution - Baseline Date to be replaced by the Goods Receipt date

    Dear Forum,
    We have the payment terms defined in the system, with the baseline date corresponding to the 'Document Date' and the credit terms as 60 Days. The users now desire that the Baseline Date should instead correspond to the Goods Receipt Date. To enable this we need to define the substitution such as the Baseline Date at the time of Invoice Verification gets substituted by the Goods Receipt Date, if the GR Date is earlier than the IV date.
    Would appreciate help from the friends as to how to configure this and which feilds to be chosen and replaced.
    Thanks!
    Regards,

    Hi
    You can make the Baseline Date in Invoice (MIRO) with Goods Receipt Date using BADI.
    BADI -->MRM_PAYMENT_TERMS
    Tell your ABAP Guy to work on this BADI.
    In the BADI,  MRM_PAYMENT_TERMS Read the Value in WEBUD of Internal Table TI_DRSEG and Pass it into E_ZFBDT.
    Also if the Baseline Date is changed manually, then after posting you can see the Goods Receipt Date in Baseline Date.
    This resolves your issue.
    regards
    venkat

  • How to pass  Goods receipt date in calling  BAPI_INB_DELIVERY_CONFIRM_DEC?

    Hi all experts,
    In my case ,I want to use FM:BAPI_INB_DELIVERY_CONFIRM_DEC to post the inbound delivery .  I want to pass goods receipt date when calling this fm. according to fm documentation as below,can use HEADER_DEADLINES to do it ,but in coding , How to implement it?
    thank you in advance.
    Bests & Regards.
    In this table, header dates are passed on in time stamp format (YYYYMMDDHHMMSS). In field BAPIDLVDEADLN-TIMETYPE the individual date fields are qualified as follows:
    - WSHDRLFDAT  Delivery date
    - WSHDRWADAT  Goods receipt date (planned)
    - WSHDRWADTI  Goods receipt date (actual)

    Hi,
    I have got the same scenario to populate the Actual Goods Receipt date from IDOC. Can you please let me know the solution that you implemented for this? I understand that this was long time back. But if you could recollect, please let me know the details.
    Thanks,
    Vanitha

  • Restrict changing the tax code in purchase order after goods receipt.

    Hi,
    Po is created with tax code x1.
    Gr is done for partial quantity.
    IR is still pending.
    User has changed the tax code to x2.
    This case we want to restrict the tax code change in PO after goods receipt.
    Please advice.
    Regards
    Ravi Kumar

    Hi Sumit,
    Po created with wrong tax code x1.
    Stores person has done the receipt and consumed the stock.
    Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
    In IR we will use correct tax code and post the accounting entry.
    Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
    Point is user's are asking that how system is allowing to change the tax code after receipt.
    Point to be attended is restrict the change of tax code by any means after Gr has happened.
    what are the possibilities to restrict the change of tax code.
    Regards
    Ravi Kumar

  • The interface type is valid, but the specified interface number is not configured

    Hi
    I'm all new to using LabVIEW, which I have to use for a project. I'm trying to make a setup with a Keithley 2000 multimeter and an Agilent U2722A SMU. But I can't figure out how to get these instruments to communicate with LabVIEW. I can see and send commands to the Keithley 2000, but not the Agilent U2722A, with Agilent Connection Expert. But when I use LabVIEW I can't see any of them, and if I use the drivers I've found with "NI Instrument Driver Finder - Configure Search" I pops up with an error message saying
    "Error -1073807195 occurred at VISA Open in Keithley 2000.lvlib:Initialize.vi->Keithley 2000 Read Multiple.vi?            
    Possible reason(s):
    VISA:  (Hex 0xBFFF00A5) The interface type is valid, but the specified interface number is not configured.?"
    I've read all the threads I could find about this problem, but none of them helped. I've checked that the NiVi488.dll is checked in MAX under the VISA options. When I open the VISA Interactive Control I see an ASRL1>>ASRL1::INSTR and ASRL10>>ASRL10::INSTR. I don't know why it says ASRL, when I'm using an USB/GPIB interface, but the Keithley 2000 have 10 as the address. (the Agilent U2722A is connected directly by USB)
    Assume I know nothing.
    Thanks

    I'm using the GPIB-USB-HS. I also used this on the development PC when I exported the hardware configuration.
    This shows up in my MAX config and when I scan instruments, all of them show up. I can query them in MAX no problem.
    My installer includes all the .exe's from my project. As I said, I've done this with my previous 2009 installer without any issue. I upgraded my installer since I upgraded my project for version 2013. The error only happens when I run my code.
     

  • I bought an MacBook Air 13 from Dubai last month. However I see smudge lines on the screen of the laptop which are prominent if the screen is black. Does the macbook air have international warranty ? Since I am in India right now. Can I get it fixed here

    I bought an MacBook Air 13 from Dubai last month. However I see smudge lines on the screen of the laptop which are prominent if the screen is black. Does the macbook air have international warranty ? Since I am in India right now. Can I get it fixed here ?
    -Ankit

    I don't know what service options are available in India but if this helps I do know that once you purchase your Apple product the warranty is valid anywhere in the world.

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • How can we put the report which is generated by the program into spool??

    How can we put the report which is generated by the program into spool??
    I had generated a file in Unix which had the report but now the requirement has changed.
    Regards,
    Shashank.

    Hi Shashank,
    If the program is executed in the background and it has the write statement then the spool will automatically generated.
    Reward points if useful.
    Regards,
    Atish

  • Goods receipt date cannot be in the past

    hii
    While doing Po i getting below error
    " Goods receipt date cannot be in the past  "
    How to rectify this ?? and why its occuring ??
    Thanks

    >
    MM group wrote:
    > hii
    >
    > While doing Po i getting below error
    >
    > " Goods receipt date cannot be in the past  "
    >
    > How to rectify this ?? and why its occuring ??
    >
    > Thanks
    Check the error No. If error is standard, then we can change the error message to warning, if the error is ABAP generated, we cannot get it changed. Usually ABAP generated errors are created as per clients requirement and can be changed with client and ABAP consultation.

  • Mixing materials with different Goods Receipt date in the same Storage Unit

    Hello everybody,
    I´d like to know how  FIFO strategy would affect to this example:
    Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
    Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
    Thanks in advance for your help

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?

    Hi there,
    How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?
    It is not convenient to remove it every time I sign a document. So, is there a way to turn this off?
    Thank you

    I think you cannot, because for many people it is so important to keep the unsigned document, and most do not realise this until it is too late.

  • How to create entity for the table which is not having the primary key

    Hi,
    Is it possible to create an entity for the table which is not having the primary key.
    I have to write a method in my session bean and that method must use this entity.
    any websites for this.

    If you are talking about processes launched from a JVM (running outside), Process is available.
    If you are talking about processes already running outside of a JVM, you could roll-your-own class to provide similar functionality as Process. This approach would be platform dependent, backed by the platform's I/O scripting and therefore limited to what the platform supports for process manipulation, e.g. Linux/Unix capabilities far exceed Windows.

  • Goods receipt date should be greater than the P.O. date

    Hi
    Is there any option to control the Goods receipt date should not be lesser than the P.O.Date??
    Eg: P.O. is raised in 10.1.9, User should not do the GRN before 10.1.9. In which way we can control  this???
    Regards
    Ravi

    Dear,
    You have to include User exit in MIGOwhich will trhrow an error at the time when Goods receipt date is greater than the P.O. date.
    Regards
    Utsav

Maybe you are looking for