Billing document are not flowing into FI and COPA

Hello SAP CO gurus,
please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
what are the settings need to check?
is there any option to get release by manual?
Initiatives rewards with points........
Regards
Chandra.

Hello Chandra,
Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
I am also working on the same issue but not solved yet.
regards
Nivas

Similar Messages

  • Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

    Hi,
    We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
    We are configuring for the MM-SUS Scenario.
    Now,to accomodate the Tax / Pricing we have installed the add on
    component LOCINSUS and we are having doubts on how to use it:
    1) Tax and pricing information are not flowing into IDOC- orders02
    (e1edp04 and e1edp05 segments are not present in the created IDOC). The
    condition print indicator in checked on ECC System and we have also
    implemented SAP note 995986.
    2)In create ASN transaction , we are not able to see the Excise Invoice
    Number and Date field in Basic data tab as expected from SAP Library
    document although we have installed the Localization Add on component.
    Please help us to reso1ve these issues,
    Regards,
    Mani
    099890-22217.

    Mani,
    Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
    If you did resolve this issue could you please let us know how, much appreciated.
    Bill.

  • Customer receipts and payments are not flowing into PS module

    Dear Team,
    I am new to the PS module..... Customer receipts and payments are not flowing into PS module. Kindly let me know the missing configuration steps.
    Thanks !!!

    Sagar Kapadia wrote:
    > 1) What is the pre-requisite configuration for activation of Commitments and Project Cash management in the PS system?
    > 2) Is there any word of caution which needs to be kept in mind at the time of activation?
    > 3) once activated, what will the impact on the data? Are there any chances of data inconsistency?
    >
    Only one pre-requisite is the creation of FM area.
    As I suggested earlier, please read SAP help which will answer all your queries.
    Please follow the below path...
    SAP Help Portal >>> SAP ERP Central Component >>> Financials >>> Project System >>> Payments >>> Project Cash Management.

  • Revenue values are not flowing into COPA

    Dear Experts,
             We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
    May I know the exact reasonu2026.
    Please suggest me in right wayu2026.
    Regards,
    Balaji Bhonsle.

    Hi Balaji bhau
    I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
    See if the Billing Type has been entered in KE4W and the VF reset for it
    Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
    br, Ajay M

  • Delta changes in R/3 sales document are not coming into CRM

    Hi Middleware experts,
    We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
    Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
    I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
    Now, if I changes the document in CRM and these changes are coming into R/3.
    Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
    I do not have any clue on what is happening? Highly appreciated, if you can help me.
    Thanks,
    PK

    Hi PK,
    In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
    I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
    Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.
    Message was edited by: Vikash Krishna

  • Material delta changes are not flowing into CRM

    Dear All,
    material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
    Do I need to create the new product hierarchy also in CRM manually?
    Appreciate any inputs
    Raj

    Hi Raj,
    Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
    Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
    Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
    Then go to SMW01 and reprosess the struck Bdoc.
    Reward points if helps,
    Regards,
    Paul Kondaveeti

  • My documents are not syncing between iPad2 and Mac Pro using iCloud

    I just download Lion yesterday...iCloud is turned on to sync documents on my MacPro, my iPhone 4, and my iPad 2, all using the new iOS 5...however, documents are not showing.  I created a document on my iPad2 using Pages, and it does not show on my Mac.  I create a document on my Mac and it does not show on my iPad2.  What is wrong?

    iwork on Lion does no document syncing. Regardless if you have set "document and data" in icloud preferences on a Mac. Not one single app uses this setting on OSX. Thus far document syncing is iOS5 devices only.
    You must visit www.icloud.com from Mac to download your files .
    After editing them you need to re-upload them manually also via the Browser to have them updated on your iOS devices.

  • AED and SED values are not flowing into Order

    Dear Gurus,
    We are using ECC 6 and TAXINJ. We did all the CIN configurations to the best of my knowledge. JMOD is flowing normally. But AED & SED are not. UTXJ is coming as also JIN6 (VAT), E Cess and S&HECess. We dont have Cess in the client's company, so Cess is not to be considered.
    If a check list can be given, maybe I can check my customization with it, since I am an SD consultant and alot of things are involving MM too. Unfortunately we dont have any MM guy with us for the time being.
    Any answers are most welcome.
    Thanks and regards.
    Venkat - Hyd.

    Hi,
    Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults
    Here check whether AED and SED condition types are assigned under columns A/R AED Cond and A/R SED Cond respectively. If not then assign and check.
    Also check in FV12 for the Tax Code used whether condition record has been maintained as 100 % for AED and SED conditions. If yes then check in J1ID, for "Excise Tax Rate", maintain rates for AED and SED.

  • Billing Documents are not coming.

    Hi ,
    System : DEV
    Source : AFS ( SAP MOdule only)
    I have activated the LO DS : 2LIS_13_VDITM and I am able to see the data in RSA3.But in my source table i have 206 entries but I am getting 67 only.
    When I have checked
    There three series of Billing documents
    1. 80000005
    2. 90000004
    3. 44000001
    In RSA3 I am able 1and 2 series Billing documents.I am not getting the 3rd series.Even i have checked Document type also ( same for all Billing Docs).
    Pl suggest where i need to check to solve my issue.
    Regards
    Ram

    RSA3 will show the documents filled in set-up tables only.
    Are you sure the third series i.e 44000001....... was included in the filling into set-up tables and not missed out or filtered due to some restirction on doc type/doc no will filling the set-up tables.

  • Workflow Daemon is stuck in E sourcing CLM and documents are not flowing to approvers.which place should i check for this issue related information i have already checked default traces and Logs

    Hi Guys,
    We have a situation in our landscape where workflow daemon service is stuck  and we have to restart the Esourcing system.
    Could you please help here where should i check the cause of the issue.
    i have already checked the Default traces and Esourcing traces.
    Could you help in identifying the cause.
    Regards
    Tarun

    Hi Tarun,
    Open the Document for e.g. Contract Document, on the Document Tab there is an option for Phase Information open that page this will give you all the information related to the phase and where it is stuck, with which user it is pending etc.
    Now since the workflow is stuck, either you can restart the Demon Registration via background Task Status. or else Cancel the Workflow so it can be restarted. by doing the below steps.
    1) goto Setup
    2) open Workflow Definition Under Workflow.
    3) now choose the phase at which your Workflow is stuck.
    4) open that phase.
    5) under Reports Tab there is option for " Current Workflow Processes"
    6) open the Current Workflow Processes
    7) search the document which is stuck
    8) click on the "X" mark  = Cancel the workflow process option
    9) it will take you to the workflow cancel wizard screen. give the comment why you need to cancel this and click on Finish
    10 ) once the Workflow is canceled the phase will go to the Requester review phase and form here you will have to manully move to the next phase. so the workflow can be restarted. once done refresh it.
    11) before doing this take Approval from the customer.
    If the above does not work and still there is an issue then please check the Pre- Phase script.
    Let me know if this works.
    Thanks
    kanchan

  • Credit memo billing document is not flowing in the order

    Dear all ,
    I have a problem,   i created a credit memo request based on the billing, i have a seperate order type for returns and i have done returns order and  returns delivery,  based on the actual  export sales i have done.   The process of everything is flowing in the actual  export sales order done , except the credit memo process . 
    I want to know wheather the credit memo process will be captured in the document flow of the order. or it wont be appearing in the document flow.. 
    My docuument flow   is giving all the process right from order to billing and the returns order till returns delivery but the process of credit memo is not showing , when i did the credit memo processing based on the export sales invoice.
    kindly guide me on this
    anitcipating reply from all
    thanks and regards
    kumaresh

    Hi kumaresh,
    Please note the following configuration for crating the Credit note with ref to Invoice :
    1.Use T code VTAF:
    Source Bill. Type ZF2
    Target SalesDocTyp ZCR
    DataT 053 Header bill
    DataT 103
    DataT 003
    021 Billing header
    Activate : Copy Itm No
    For Item : example from TAN to G2N .
    Every thing is SAP Std , activate Update Document Flow
    Pricing type - D and Copying requirements 303
    Please do the above settings and your peoblem will be solved
    Veera

  • Items are not flowing into the second master page.

    Hello,
    any help on this is really appreciated. this is the situation. There are two master pages. I have created a flow content subform. And within this, i have created a position content subform. Within this, i have the different fields of an item level table. There are a total of 14 records. three pages are used. And all the three are the first master page. The second master page is not being used. I have tried many ways, but could not suceed. Could any one out there suggest a way to solve this problem?

    Hello,
    I'm facing a problem here. Within my print form I have one master page.
    Basically I have a dynamic table which must be followed by a standard text.
    So I've created a subform (flow content), in it I have another subform (flow content, table): in it one subform (flow content, table row) and a subform (position content with my text).
    Although all the 'allow page breaks' are checked, the issue I have is that the second page is never printed...

  • Item line data not flowing into SAP Adobe form layout

    Hello Gurus,
    I am currently working on adobe form layout for a sales document in SAP, i have created a master page
    as well as a couple of pages in the design view. Data at the header level are working properly, but the item data
    are not flowing into the layout, as nothing appears in the print preview for the item level of the sales document.
    I have done all the necessary binding with all the right field names, my subform to the best of my knowledge seems to be well
    defined, but yet to no avail.
      I would like to know what yet could be the reason for this issue and how i can go about fixing it.
    Thank you.
    Ahm.

    Hi Vijai,
    In our project, we have the same requirement but I am one step behind than you. I am able to generate the PDF form but not able to generate the data. Means all the fields are coming as disabled fields.
    Can you please send your code as a sample code so that I can have a look at that and check where I am doing wrong/missing. My id is sandeep.kamdar in gmail
    Thanks & Regards,
    Sandip Kamdar

  • Billing documents should not be created when it is not released to accounti

    Hi SD gurus,
    In some situation, billing documents are generated but it is not released to accounting which results in mismatch between FI value and SD value. We go to VFX3 and see the list of billing documents and take corrective action.
    Our requirement is that the billing document should not be generated when system is not releasing this billing document to accounting.
    Please suggest a solution for this.
    Regards,
    Senthil.

    Thanks giri.
    For the following reasons, the billing documents are not released to accounting.
    1. If the user wrongly chosen the billing type for the delivery.
    2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
    Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
    Hope this will be suffice to understand my issue and suggest a suitable solution.
    Points will be rewarded.
    Regards,
    Kumar.

  • CVD & ADC not flowing into MIGO.

    Hai all,
    For the Import purchasing, i did the MIRO to capture the customs & CVD values. But while doing GR, CVD & ADC values are not flowing into MIGO ( it should be shown in BED & AED ) respectively. I have maintained this condition types JCV1 & JADC in Excise default settings also. Is there any notes are available for this error?. Please throw your lights

    Hi,
    Please check J1ID, whether we have maintained material and chapter id combination and cenvat determination. Secondly check the MIRO no. you are entering while doing MIGO. Sometimes it happen, that the miro number entered during MIGO different that of actual MIRO.
    Ishu

Maybe you are looking for