Billing documents should not be created when it is not released to accounti

Hi SD gurus,
In some situation, billing documents are generated but it is not released to accounting which results in mismatch between FI value and SD value. We go to VFX3 and see the list of billing documents and take corrective action.
Our requirement is that the billing document should not be generated when system is not releasing this billing document to accounting.
Please suggest a solution for this.
Regards,
Senthil.

Thanks giri.
For the following reasons, the billing documents are not released to accounting.
1. If the user wrongly chosen the billing type for the delivery.
2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
Hope this will be suffice to understand my issue and suggest a suitable solution.
Points will be rewarded.
Regards,
Kumar.

Similar Messages

Billing document should not be cancelled after creating return sales order

Hi All,
Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
Sudheer.

Hi,
In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
Check and confirm.
Regards,
Ravi Duggirala

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice.

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

Just bought the iphone,battery dies within a day.anyway to get the apps not to run when i am not using them?

just bought my iphone, and the battery dies within one day. Is there anyway to get the apps not to run when i am not using them to save my battery

Yeah. Double tap the home button and the screen will shift upwards to show all your running apps. Just press and hold one until they start 'wiggling' then press the 'no entry' like sign that appears in the top left corner of the apps. That'll close them and release the memory and resources they're taking up

Foreign trade--Billing document should not be created with missing data

Hi,
We have foreign trade set up. In that we defined incompletion schema at line item level with commodity code and country of origin as "Field ready for input - Incompletion check active".
Can anybody tell me that, in the above setup, is it possible to avoid the creation of billing document with missing above data.
Generally , system will go for the accounting status for block with foreign trade data missing. But our users don't want to create the billing document if the data is missing.
Can any body suggest us.
Rajesh.

Hi Rajesh
You have to set up a new subroutine or you have to copy the standard subroutine and include the logic that it should read the foreign trade details at both sales order and delivery levels.you need to assign the subroutine in both VTFL and VTFA copy controls (header and item levels)
Another option is you have to go with user exit RV60AFZZ.Please refer this link,hope it should solve your problem
http://forums.sdn.sap.com/thread.jspa?threadID=1361141&tstart=3735
Regards
Srinath

Price change made in billing docu. should reflect in sales docu.

All,
My requirement is, when we change the price in a billing document(invoice) it should reflect back in the sales document. Is it possible to do this and if so how do we do this? Can any one please help me out.
Thanks
Visu

Hi Vijay,
No it is not possible. You can only update the pricing in sales document and it can be updated in invoice and not vice versa. But in order to do that you need to do the credit note and reverse PGI and do the returns delivery if it is delivery related billing, but if it is order related billing then you can just create a credit note and change the price in the sales document and then invoice again.
Reward points if the answer is helpful
thanks
regards
ravi

Deemed exports not getting created when excise invoice generated in backgro

Hi guys,
when i create an excise invoice in background .and try to create ARE-3 in J1IA301.I am getting a error (081091004/2009 excise invoice is meant for normal invoice).
when i create excise invoice manually and click on goto - utilization . The excise invoice type will be local .If i click on the pencil tab it will change to EXPORT and we can see DEEMED in blue color after this i will save and create ARE-3. ARE-3 gets generated.
while creating excise invoice in background the EXCISE INVOICE TYPE in J1IIN will be LOCAL and we will not be able to change after this when i try to create ARE - 3 IAM GETTINGTHE ERROR..
Please help me out of this..
As my client wants to create the excise invoice in background while billing document is created..
Regards,
Shivdeep B

Hi,
If you want to create excsie invoice in back ground while creating billing document for Deemed exports.
Please follow the navigation as mentioned below.
SPRO - Logistic General - Tax on goods movement - India - Business transaction - Out going Excise invoice - Maintain default Excise group and series group.
Here please maintain you Plant, Excise group & Series group for deemed exports sales area combination and export type as Deemed exports in *details screen*. Now system will create excise invoice for deemed exports in background while creating the billing document go to display excise invoice and see the utilization you get Deemed exports.
This will do for you.

User Home Directory not being created when "Create Home Now" button hit...

This is a cross post, since I was not sure where this should end up since it touches two pieces- Open Directory and User Management. Any help would be appreciated!
I am running OS X Server 10.5. All of my user accounts have been migrated over along with their home directories. Problem is that when creating new users and then assiging a home directory the system does not actually create the directory.
Currently all users are setup to have their home directory setup here:
afp://172.16.110.100/Users/'username'. The Users folder has been setup to automount, and all users that have folders can be accessed without issue.
The problem is when I create a new user, select the aft://172.16.110.100/Users option and then select "Create Home Now" button and save as it requests... it does not create the directories.
I have even tried to change the Home patch to make it local to see if it was an network issue, and used the /Users choice and it will not create the directory in that way either- both location go to the same place.
The system was obviously able to create the local admin account and directory admin account home folders without issue when the system was installed.
The permissions for the "Users" folder are as follow:
directory admin = Read and Write
local admin= Read and Write
system user (root)= Read and Write
admin group= Read Only
everyone group= Read Only
The system is in production, so any kind of server resets need to be done after 5pm, so I have not been able to reset AFP service.
Currently the only services running are AFP, SMB and Open Directory.
All users have their entire home directories located on the server, and login over Directory Access on their clients, so all user accounts are stored on the server. No one is having issues accessing their files or logging in.
I just can not create new home directories when I create new accounts.

You do not have to be logged on as the root user to do this. Launch the terminal and type-
sudo createhomedir -a
I run an XServe with Tiger server ( 10.4.11) and this has been the workaround I have been using.
Good luck.

AUC Asset not getting created when Internal Order is created

Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
Sanjai

Hi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Need help: Distribution demand is not getting created when Iu2019m using Purch

Friends,
When Iu2019m running the heurisitic plan distribution demand is not getting created. Iu2019m working on SCM 5.1
I have a transportation lane which are automatically created using the Purchase inforecords. Iu2019m not
facing any issues tranfering this purchase info records (PIR). Iu2019m able to see this as transportation lanes
in APO. When I run the heuristic plan run purchase requsition are getting created but distribution
demand is not getting created. I have tested the same scenario by manually creating transportation
lanes. The manually created transportation lanes are generating distribution demand but purchase info
record transportaton lanes are not generating the distribution demand. What may the cause? I would really appreciate for
your input in advance.
Regards
KRN

Friend,
I have maintained the means of transport to the tranportation lane
Regards
KRN

Text in Billing document should determine into output

Dear Friends,
Help me to determine billing document item text into printout as a line item description.
My Scenario is:
Generally in printout item description is determined.But i need to determine the billing item text as a item description.
Thanks in advance,
Regards,
Ravi

Hi Ravi
If you want the billing item text as item description then you have to take your ABAP team help and ask your ABAP team to include the logic that billing item text has to come as item description As these changes can be done in the Smartforms.
Also give NAST, STXFTXT tables which may help your ABAP team
Regards
Srinath

Purchase requisition to be created when Inspection lot is released

Hello,
A Purchase Requisition need to be created (for external services) at the time of Inspection lot generation. I tried using the Inspection Plan operation control key with 'Extenally processed processing' with Info record, Pur Org details.. etc. Still, when Inspection lot is released, Purchase requisition is not generated.
Any clue?
Thanks
JK

Can you explain your business scenario.
In standard QM you cannot create purchase requisition from inspection lot creation.
1. You can use Userexit QAAT001 to create purchase req if needed.
2. Refer to "external processing in QM' if you want to create Purchase req during production.
http://help.sap.com/saphelp_46c/helpdata/en/42/75f1e256cc11d1896a0000e8323c4f/content.htm

War not getting created jdeveoper 10 g latest release

hi,
I had created a new deployment profile for my application names testwar , but the war is not getting created in the folder deploy nor there is any folder named deploy in my application workspace directory.
Can anyone help me or give me a link which will help me create a war file , is it necessary to select the platform also on the option provided while make the

Hi,
create the deployment profile and use the context menu to create the war file. That is how it works.
Frank

How to restore documents after a clean install when location is not known?

I have had some troubles with my computer recently and the person at the genius bar said I should wipe my drive clean and include everything except my library folders and system folder. The only thing I don't know how to restore is documents that aren't stored in a known location in the finder. What I mean is programs like LittleSnapper or Macjournal that have their files contained with the application (in another words I don't go to the Finder to save or open these documents.)
I did a search for some files from "Things" and it looks like these get stored under the library. Therefore if I choose to not restore the library (like the Genius said) wouldn't I lose access to these files?! LittleSnapper appears to save it's files in a hidden folder on the hard drive called "private". How can I restore that folder if I don't even have access to it?
Do I just export the files from these programs to the finder and then reimport them later? "Things" doesn't even appear to have a way to export it's files that I know of.
Thanks in advance for any help you can provide in this matter.

"No program keeps stuff in the private folder."
The reason I thought that is if you open a LittleSnapper screen shot in Photoshop or where ever and then command click on the windows title it shows the private folder on the file's path.
"Before you do reformat, try creating a new user account. See if you're problem still exist within that new user."
Yes I still have the problem with the new user account.

Billing documents should not be created when it is not released to accounti

Similar Messages

Maybe you are looking for