BIOS Update HP DC 7900 ultra slim PC from 1.08 to an higher version - ERROR

Hello,i'm trying to process an BIOS Update from Version 1.08 to a newer Version. Therefore i've checked many BIOS files you are providing. Even the BIOS file of 1.09 verion. It will not work. Please find attached the response of the Update process:  Trying to flash via BIOS (F10 function) from USB stick or CD:Copying of BIOS file = 100%flashing of BIOS = 104% and nothing else will change  Trying to flash via DOS Boot Stick and DOS Flash Tool:Copying of BIOS file = 100%flashing of BIOS = the percent counter will increase and NEVER stop (for example it reaches 389% and so on....)  Trying to flas via Windows software:The process will run until 100% and than nothing happens. It seems that the program will freeze (program will not response anymore).  Can you please try to help me to update my BIOS version? I need the update because Version 1.22 seems to have an update of the grafic component which i need. Thank you very much!  Christian Maier      Hallo, ich versuche verzweifelt ein BIOS Update von Version 1.08 auf eine neuere Version durchzuführen. Habe sämtliche Versionen ausprobiert, auch die direkt darauffolgende 1.09.Leider erhalte ich folgendes Verhalten des Systems: Flashen über BIOS (F10) und USB Stick oder CD:Kopieren der Bios Datei = 100%Flashen des BIOS = 104% und danach keine weitere Veränderung  Flashen über DOS Boot Stick und DOS Flash Tool:Kopieren = 100%Flashen = zählt ewig hoch (z.B. 389% usw....)  Flashen über Windows:Bleibt bei 100% hängen und macht nix mehr (Sanduhr. Anwendung läuft ununterbrochen über Stunden hinweg ohne dass etwas passiert).  Ich bitte hier um Unterstützung. Grund des Updates: Ich habe nur einen Monitor der Über Displayport angeschlossen werden kann. Und erhoffe mir durch ein BIOS Update eine entsprechende Updatefunktion des Grafikkartentreibers, so dass auch der BIOS, Startscreen auf meinem Monitor angesehen werden können.  Danke für die Unterstützung!  Christian Maier

try running the bios update in safe mode.

Similar Messages

  • After bios update side nomberpad is not workinh keys from 0-9

    after bios update side nomberpad is not workinh keys from 0-9

    Hello jay04,
    Welcome to the HP Forums!
    I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Thanks!
    Mario
    I worked on behalf of HP.

  • Does anyone have corrective advice for me to follow? In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message: The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1). Thanks, A

    Hi everyone
    Does anyone have corrective advice for me to follow please?
    In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message:
    The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1).
    Thanks,
    tooborac1

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • KT4 Ultra BIOS Update soon?

    Has anyone got any info about the intended release date of the next BIOS update for the KT4 Ultra 6590? It seems the KT4V is getting a load of updates....

    obviously not - lol

  • Dear Santa give me a BIOS update.

    Dear Santa
    All I want for christmas is a BIOS update for the KT4 Ultra 6590. That would be the best thing that could happen...Can anyone out there tell me whether it will happen?
    Thank you Santa!!
    Sherry and mince pies will be provided as usual.

    http://www.msi.com.tw/program/service/forum/index.php?threadid=9061&boardid=13&styleid=1

  • MSI x99 AC Power Bios Update

    When will the x99 ac power be getting a new bios update? is one planned?

    Quote from: Nichrome on 06-October-14, 01:52:06
    Is a new one planned? Most likely yes, but I have no clue about time when it will be released.
    Contact MSI:
    >>How to contact MSI.<<

  • Satellite C870-196 - Long launch after BIOS update

    Hello
    I went to u BIOS 6.00 to 6.70 and I have a very long black screen between the TOSHIBA logo and the launch of my session I had not before!
    I delivered the default settings in the BIOS (F9) as shown.
    Where can this come and what to do?
    Thank you
    Kind regards

    Well, new BIOS updates contain always some changes and probably something has been changed in new version and therefore the time between Toshiba logo and appearance of the image is a little bit longer.
    What to say its not know to me that you could modify this delay so you will need to accept this BIOS change

  • Portege A100 PPA10A - Will BIOS update allow to boot from a USB device

    Hi,
    I have an Old Portege A100, Model: PPA10A-0002LP, but I can't seem to find that model on any Toshiba website, closest I've seen is the " PPA10A-0002L".
    I'm wanting to see if there's a BIOS update that will allow me to Boot from a USB Device.
    The issue I am having is that I need to reinstall Windows, but the CD ROm cant read discs.
    It does Network Booting PXE, but i'm new to this sort of thing and have absolutly no idea what to do there.
    Any help would be great,
    Thanks

    Hi
    Portege A100 seems to be developed only for Australian market.
    As you said there is a Portege A100 PPA10A-0002L model number listed on the Toshiba Australian page but the Portege A100 PPA10A-0002LP belongs to the same series which is PPA10A.
    So in my opinion the BIOS should work too.
    Anyway, I doubt that the BIOS update will add any further booting options.
    Usually the BIOS support the booting from CD/DVD drive, HDD, LAN and USB FDD.
    It should be possible to boot from a bootable diskette using an USB FDD drive.
    I doubt you would be able to boot from USB ODD since this Portege A100 supports an internal CD/DVD drive.

  • Higher Idle CPU Temps with Newest BIOS update for T430s/T430

    My idle temperatures of my CPU as reported by TPFC .62 before the UEFI Bios update were hovering around low 40's to high 40's. Now after the UEFI BIOS update the Idle temps as reported by TPFC .62 is a lot higher. It idles anywhere between 47 to high 55's. I noticed this immediately I updated the BIOS. Anyone else notice this???
    Please fix Lenovo

    Hi goshem
    If you try to do a stress test with Prime95, will it exceed 90C? 
    Peter  
    W520 (4284-A99)
    Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future | Please do not email me regarding technical problems, you could post it in the forum
    =====================================
    Sound Enhancement (Post comments, share mixes, etc.)
    Dolby Home Theater v4 ; IdeaPad Slate Tablet

  • Satellite L850/0C9: Toshiba Service Station recommending wrong BIOS update?

    I have a Satellite L850-0C9 laptop and Toshiba Service Station is recommending I install the new BIOS update labelled "Satellite Pro C850 BIOS Update - v6.50".
    Should I install this as its not the same model as my laptop,
    If not why is Service Station recommending I install it?

    I assume this is your notebook and these are all the drivers and BIOS available for this notebook model:
    http://www.mytoshiba.com.au/support/computers/satellite/l850/pskdla-0c900r/download
    The latest BIOS is v6.50 and it looks to be the right one.
    The Pro C850 seems to belongs to the same series so possibly the BIOS is the same.
    However, the BIOS update is always an sensitive procedure and from my point of view its not really necessary if you dont have an serious problems.

  • Bios update on an Tecra M4?

    I have a 2006 Tecra M4 and was checking it out for Vista compatability - it looks like thats a no-go at the moment (perhaps a whole other subject though, I have a 'windows vista compatible' sticker and its far from compatible as far as I can see)
    However, it did prompt me to try and update the BIOS. According to the download page I can do this via windows rather than make a boot CD. The downloaded file has no .exe though. Am I looking in the wrong place? Is there a BIOS upgrade for an M4 with an .exe in it somewhere?
    I have tried a search here and in support in general but I'm not seeing any answers that actually help with this. Updating from a CD makes me nervous so please help me find the file!
    Thanks.

    Hi,
    I used the Tecra M4 beta bios update for Vista when it was available on the USA site. It was the only way I could get Vista to perform an install (Vista new I needed a bios update and would exit the install). Once I updated the BIOS, Vista installed just fine. I have since downloaded and installed the updated drivers and applications from Toshiba and all is work perfectly. Toshiba has posted all of the updates in the support section for my model since the official launch of Vista and taken down the beta Vista page where all of the beta drivers were for all of the different models. I am concerned that they have posted all of the updates, but the BIOS update I had to use is missing from the update list! Does anyone know if they plan to post a final BIOS update, or was the bios just an over sight and left off the list? I am not comfortable running a PC with a BIO version I no longer have access to. I only see the older BIOS versions on the support site.

  • HT1766 Can I update my iOS on my Iphone 3g from 4.2.1 to anything higher?

    Can I update my iOS on my Iphone 3g from 4.2 to anything higher? I am new to the whole Iphone community.

    No.
    (87010)

  • HT201263 IPhone 4S unlocked set , from iOS 6.1.2 upgrade to IOS 6.1.3 unable to update and now is in recevery mode, tried using ITunes to restore but end error ( error -1)

    I had one iPhone 4S buy from Singapore, have been using this phone about a year,
    Things happen when update from iOS 6.1.2 to iOS 6.1.3 (non-jail break phone).
    After update, when on 3G, phone become no service or searching. Had change new SIM card carrier vision 14.1.
    Things never change, so I did another restore using iTunes , things get worst, phone stuck in recovery mode and ending error (error-1)
    Had tried few time and same error.
    Note ITunes latest vision

    I had the same issue until yesterday. been struggling with it for the last 2 days. I bought the unlocked 4s from the store a week ago and now I cannot upgrade from 6.1 to the higher version.
    Although, after searching a lot on the net, I was able to find a software that'll get you out of the recovery mode. Hope this helps. Install the software and click on the 'Recovery Mode Loop Fixer' (2nd tab) and click 'Set Auto Boot True'
    The software looks shady but worked.
    Link:
    Ireb download link- WINDOWS
    NEW LINKS- ( http://hotfile.com/dl/179514703/4b201... ) (http://www.mediafire.com/?c4jqux6alnj... )
    IREB FOR MAC
    http://mediafire.com/?mymjzjaymyj

  • DC7700 Compac ULTRA SLIM DESKTOP PC BIOS UPDATE

    Hello world
    I’m using Windows 7 Ultimate on a DC7700 Ultra-Slim Desktop PC and I’ve been getting these really annoying freezes where the screen goes black for a few seconds then I get an error message “Intel Accelerated Graphics Drivers for Windows Vista stopped responding and has recovered.” Sometimes I get a bluescreen and the PC reboots- mostly when I play a video file or PC game.
    I downloaded an updated Intel graphics driver which installed fine and actually boosted performance significantly but the screen flashes persist. After a lot of research I think I need a bios update but I can’t seem to find one for win 7 ultimate. Information on this stuff isn’t always accurate and I don’t want to take any chances with the installation. My current BIOS software is 786E1 v01.09, 1/5/2007 (Q965/Q963 Express Chipset Family) and the updated Intel Graphics Accelerator driver is version 8.15.10.1930, 9/23/3009.
    I don’t want to mess with the BIOS so I’m hoping someone can point me to the right download. Also would it be possible to do the upgrade in a Windows environment as opposed to Setup or Command mode? Please help!

    Could you please give me the exact product number for your computer?
    If you need help finding it, you can use the following link:
    http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
    Thanks,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Bios updates for 845 Ultra?

    Is anyone aware of any pending bios updates for this motherboard or has it been put out to pasture ?  I'd still like to see a fix for the warm restart problem when overclocking in addition to the 1.65 core voltage limitation.  Before anyone says that those won't be fixed - I can wish, can't I?  

    I have the 845 Ultra-ARU and I am running my 1.8A at 2.52 GHz with a voltage of 1.71 actual applied volts.  This system is rock stable with a fsb of 140.  I have done the VID-pin mod, however.  I too would also like to see a BIOS update for a couple of reasons.  
    1)  According to the temperatures being reported by PC Alert III, my BIOS, and MBM5, my CPU idles at 50 C and goes up to 67-68 C under a full Prime95 load.  The reason why I think this is faulty is because I have run my computer with the side panel off, and there is no difference in the CPU or system temperature.  Also, when running the Prime95 test, I've put my hand right on the heatsink and it is BARELY warm.  The heatsink is making solid contact with the CPU, so if the CPU was actually at 68 degrees C, the heatsink too would be incredibly warm.  My own hand tells me that it cannot be 152 degrees Fahrenheit.
    2)  THE MEMORY RATIOS ARE GARBAGE!!!!!  I've got a 2.52 GHz CPU that is suffering a bottleneck from the measly 2.0 GB/s that my RAM is able to feed it.  Every other motherboard I've ever seen gives you the options of a couple different memory ratios.  I would at least like the option to run my memory at a different speed than my fsb.  Perhaps a 3:4 ratio could be done?  Just something so that I can try and get a little more bandwidth out of my RAM.  I know that the board is only designed to support PC1600 and PC2100 DDR RAM, but how could it hurt to give the option to support PC2400 or PC2700, maybe even PC3200 DDR RAM?  Plenty of other 845 chipset based boards can do that.  (Not officially, but through a variety of memory ratios.)  I'm just tired of not being able to do anything with my memory.

Maybe you are looking for