BitLocker Administration and Monitoring Reports Error

When attempting to run Reports through the Administration and Monitoring console I receive the following error...
"The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable)"...
What or how can I verify the connection between the report server and report server database (SQL Database Server) is occurring. Also, which logs can I review to determine what's causing this error...

Hi,
go to your Report Server and check if there is an MBAM Folder. Within that Folder you can check the DataSource and verify the target db and Connection Details.
/Oliver

Similar Messages

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Adapter Administration and Monitoring - AAM in SP17

I'm trying to use apis that are listed in this new AAM module in SP17 and I cannot find this directory in my xi system - <serverDir>/j2ee/cluster/server0/bin/services
directories in this path are com.sap.aii.af.service.administration.api
API is partitioned into sub packages
com.sap.aii.af.service.administration.api.cpa
com.sap.aii.af.service.administration.api.monitoring
com.sap.aii.af.service.administration.api.i18n
For additional info - please check 766332 which tells that there are new APIs for adapter monitoring.
Can one of you on SP17 please check and tell me if you see these paths and files?
Thank you,
Parimala

Hello,
I have checked in my system for the same file, but that file was not listed over there.....
tell us u r problem regarding that files..
thanks....
dont forget to give reward points

EP6.0 and KMC Installation and cf_installation.report errors

Hi,
I am installing EP6.0 on SUSE9 box.
The OS level is as follows:
Linux nadess01 2.6.5-7.191-smp #1 SMP Tue Jun 28 14:58:56 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux
The java version is:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142ifx-20051125 (JIT enabled)
J9VM - 20050524_1742_LHdSMr
JIT - r7_level20050518_1803)
After installing the Portal I get the following messages in the cf_installation.report file
A Configuration upload sequence has started at: Sat Jan 21 22:13:17 PST 2006
Number of upgrades to be processed: 3
com.sap.portal.supportability.isolde: non-fatal error(s).
com.sapportals.portal.prt.service.soap: non-fatal error(s).
com.sap.portal.runtime.config.component: non-fatal error(s).
Please check the log file for more details.
The upgrade sequence completed with some non fatal errors.
I can connect to the Portal using the URL and there are no *err files in the following directories
../../WEB-INF/deployment/
../../WEB-INF/deployment/pcd
../../WEB-INF/deployment/pcdContent.
So the question is why am I getting these messages?
After the Portal installation I am trying to install the KMC module. The installation errors
ERROR 2006-01-21 23:32:46
CJS-00320 Portal Deployment Monitor Error: The Portal Configuration Upgrade report file (/usr/sap/NED/JC00/j2ee/cluster/server0/cf_installation.report) does not exist. Contact your local support center.
There is a cf_installation.report.bak file that exists. I removed the .bak extension according to a forum reply. The installation moves on and I get the following messages
WARNING 2006-01-22 00:24:49
Portal Deployment Monitor Warning: Nothing to monitor. No remaining EPT files found.
WARNING 2006-01-22 00:24:49
Portal Deployment Monitor Warning: Nothing to monitor. No remaining PAR files found.
completes succsessfully. BUT there are NO files with
com.sap.ib.bi.*
com.sap.km.*
com.sap.netweaver.*
com.sap.workflow.*
installed in the pcd and pcdContent directories.
I have tried the installation many times but don't know where the problem is.
I connect to the portal but get error messages when try to access the System Configuration -> Content Management.
I would appreciate a resolution to this problem.

Hi Javed,
Seems there is some problem with Linux x86_64 systes. Please check SAP Note 874092. It may provide some idea.
Regards,
Siva
P.S: Award points if you find this useful.

Apex and Jasper Reports error

Hi,
I try to print an Report using Jasper Report, whenever i try this, i am getting this error:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1029 ORA-24247: network access denied by access control list (ACL).
I have enabled Network Services but without Success
any Idee?
many thanks in advance
MDK.

Hi sivadas,
thanks for reply, i have done it using the code below, but still the same error
begin
begin
dbms_network_acl_admin.drop_acl(
acl => '/sys/acls/utl_http.xml'
exception
when others then null;
end;
dbms_network_acl_admin.create_acl(
acl => '/sys/acls/utl_http.xml',
description => 'TEST',
principal => 'FLOWS_030000',
is_grant => true,
privilege => 'connect'
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(
acl => '/sys/acls/utl_http.xml',
principal => 'FLOWS_030000',
is_grant => true,
privilege => 'resolve'
dbms_network_acl_admin.assign_acl(
acl => '/sys/acls/utl_http.xml',
host => 'localhost',
lower_port => 8080,
upper_port => 8080
end;
any Idee?
MDK.

SAP administrator and monitoring tools

Hello,
I'm student at the university of montreal and i am for the moment in internship in a media enterprise as a consultant. They Use SAP business one for the management. I've somme difficulties at the moment to manage it as i would like. Is there some monitoring tools to help me administrate the SAP system like analyse the database and edit faster and easier my acces list and avoid repetitive action ( automatization) for exemple.
Thank you very much for you're answers.

Hello Alicia
As already recommended in the other thread you opened:
Remote Support Platform may be helpful for your needs. Following document describes some of its features:
Remote Support Platform (RSP) and its benefits
You may be able to find RSP installation package in the SBO instalation CD provided by the partner in following route:
Packages\Remote Support Platform\Remote support platform for SAP Business One
Regards

Quicktime player opens about 50 videos and then reports errors

The last time I was using Mountain Lion's QuickTime player, I accidentally selected about 90 files so now if I try and open the player, it wants to open all those files each time. Then it says it can't open them because they are in some format not supported. I have to force quit or else close each file. I tossed out all the QuickTime preference files I could find in the library but that didn't help. I even tried dragging a video to the QT app hoping it would forget the other files but it tried to open them all again as well as that video. Once again, I had to force quit. How can I make QuickTime Player forget all those files and just open up?

The last time I was using Mountain Lion's QuickTime player, I accidentally selected about 90 files so now if I try and open the player, it wants to open all those files each time. Then it says it can't open them because they are in some format not supported. I have to force quit or else close each file. I tossed out all the QuickTime preference files I could find in the library but that didn't help. I even tried dragging a video to the QT app hoping it would forget the other files but it tried to open them all again as well as that video. Once again, I had to force quit. How can I make QuickTime Player forget all those files and just open up?
This is what happens when you fall into bad habits and fail to "clean up" after yourself before closing the app. You can try opening the QT player and immedialy try holding down the "Option/Alt" key while selecting the "Quit and Close all Windows" File menu option. If the player can "release" the files before being caught in an infinite loop or similar "read to EOF" routine, then you may be able tp "clear" the "re-open" file referencing and prevent having to "force" a quit exit from the app. Otherwise you will have to turn on the "System Preferences/General/Close windows when quitting an application" option and see if that works when forcing an application to quit.

Vista got corrupt after power failure. sfc reports error and Event log service is unable to start itself.

Hi,
After a sudden power failure, I guess vista file system is corrupt.   I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself, when I start IE, it closes automatically ,
Norton antivirus does not start itself. and so on.
After Bing search, I went to safe mode and executed sfc /scannow and it reported error as below.
"Windows resource protection found corrupt files but was unable to fix some of them"
Unfortunately I am unable to upload log file, so I am pasting CBS.log content here....   Please advice.
Some parts of logs are removed due to limit of 60000 characters.
Please advice.
Regards
2014-07-07 14:55:57, Info                  CBS    Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
2014-07-07 14:55:58, Info                  CSI
00000001@2014/7/7:09:25:58.062 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x7147854e @0x714563a1 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info                  CSI
00000002@2014/7/7:09:25:58.156 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x714ae7b6 @0x71490f93 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info                  CSI
00000003@2014/7/7:09:25:58.187 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x73981a0d @0x73981794 @0x34360b @0x342be3 @0x3417cb)
2014-07-07 14:55:58, Info                  CBS    NonStart: Checking to ensure startup processing was not required.
2014-07-07 14:55:58, Info                  CBS    NonStart: Windows is in Safe Mode.
2014-07-07 14:55:58, Info                  CSI    00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL,
phase = 0, pdwDisposition = @0x2dfe70
2014-07-07 14:55:58, Info                  CBS    NonStart: Success, startup processing not required as expected.
2014-07-07 14:55:58, Info                  CSI    00000005 CSI Store 4780952 (0x0048f398) initialized
2014-07-07 14:56:03, Info                  CSI    00000006 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:03, Info                  CSI    00000007 [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:10, Info                  CSI    00000008 Repair results created:
POQ 0 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\ca20037dc599cf01650000007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa070f7dc599cf01660000007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
    2: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aca137dc599cf01670000007806a403.program_files_common_files_d7a65bb2f0e854e7.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_d7a65bb2f0e854e7.cdf-ms"
    3: Move File: Source = [l:278{139}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a8d187dc599cf01680000007806a403.program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms", Destination = [l:190{95}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms"
    4: Move File: Source = [l:286{143}]"\SystemRoot\WinSxS\Temp\PendingRenames\4ab11f7dc599cf01690000007806a403.program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms", Destination = [l:198{99}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms"
    5: Move File: Source = [l:292{146}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa12227dc599cf016a0000007806a403.program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms", Destination = [l:204{102}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms"
    6: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa28487dc599cf016b0000007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    7: Move File: Source = [l:208{104}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aeb4c7dc599cf016c0000007806a403.$$_ehome_40103e2da1d
2014-07-07 14:56:10, Info                  CSI    121de.cdf-ms", Destination = [l:120{60}]"\SystemRoot\WinSxS\FileMaps\$$_ehome_40103e2da1d121de.cdf-ms"
POQ 0 ends.
2014-07-07 14:56:10, Info                  CSI    00000009 [SR] Verify complete
2014-07-07 14:56:11, Info                  CSI    0000000a [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:11, Info                  CSI    0000000b [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:19, Info                  CSI    0000000c Repair results created:
POQ 1 starts:
POQ 42 ends.
2014-07-07 14:58:29, Info                  CSI    000000b1 [SR] Verify complete
2014-07-07 14:58:30, Info                  CSI    000000b2 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:30, Info                  CSI    000000b3 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:38, Info                  CSI    000000b4 Repair results created:
POQ 43 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf01391100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf013a1100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    2: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\cadfdcd4c599cf013b1100007806a403.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
    3: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a41dfd4c599cf013c1100007806a403.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
    4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea0ef7d4c599cf013d1100007806a403.$$_apppatch_1143992cbbbebcab.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
    5: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea241dd5c599cf013e1100007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
    6: Create Directory: Directory = [l:48{24}]"\??\C:\Program Files\MSN", Attributes = 00000080
POQ 43 ends.
2014-07-07 14:58:38, Info                  CSI    000000b5 [SR] Verify complete
2014-07-07 14:58:38, Info                  CSI    000000b6 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:38, Info                  CSI    000000b7 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:43, Info                  CSI    000000b8 Repair results created:
POQ 44 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\eac6f0d7c599cf01a31100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa89f5d7c599cf01a41100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    2: Move File: Source = [l:216{108}]"\SystemRoot\WinSxS\Temp\PendingRenames\6a4cfad7c599cf01a51100007806a403.$$_resources_fbee56ab048ab239.cdf-ms", Destination = [l:128{64}]"\SystemRoot\WinSxS\FileMaps\$$_resources_fbee56ab048ab239.cdf-ms"
    3: Move File: Source = [l:230{115}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a61100007806a403.$$_resources_themes_4d0d4910e83c2273.cdf-ms", Destination = [l:142{71}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_4d0d4910e83c2273.cdf-ms"
    4: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a71100007806a403.$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms"
    5: Move File: Source = [l:252{126}]"\SystemRoot\WinSxS\Temp\PendingRenames\8a7001d8c599cf01a81100007806a403.$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms", Destination = [l:164{82}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms"
    6: Move File: Source = [l:276{138}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa9408d8c599cf01a91100007806a403.$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms", Destination = [l:188{94}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms"
    7: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\cab80fd8c599cf01aa1100007806a403.$$_schcache_f995a5d4decb8cc0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf
2014-07-07 14:58:43, Info                  CSI    -ms"
    8: Move File: Source = [l:212{106}]"\SystemRoot\WinSxS\Temp\PendingRenames\cad948d8c599cf01ab1100007806a403.$$_msagent_be90584645cb9b95.cdf-ms", Destination = [l:124{62}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_be90584645cb9b95.cdf-ms"
    9: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a7578d8c599cf01ac1100007806a403.$$_system32_21f9a9c4a2f8b514.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
    10: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\cafa81d8c599cf01ad1100007806a403.$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
    11: Move File: Source = [l:224{112}]"\SystemRoot\WinSxS\Temp\PendingRenames\aae18dd8c599cf01ae1100007806a403.$$_msagent_chars_9a5bcb5da392f588.cdf-ms", Destination = [l:136{68}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_chars_9a5bcb5da392f588.cdf-ms"
POQ 107 ends.
2014-07-07 15:08:01, Info                  CSI    00000213 [SR] Repair complete
2014-07-07 15:08:01, Info                  CSI    00000214 [SR] Committing transaction
2014-07-07 15:08:01, Info                  CSI    00000215 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-07 15:08:01, Info                  CSI    00000216 Created NT transaction (seq 1) result 0x00000000, handle @0x4cc
2014-07-07 15:08:01, Info                  CSI
00000217@2014/7/7:09:38:01.060 CSI perf trace:
CSIPERF:TXCOMMIT;5
2014-07-07 15:08:01, Info                  CSI    00000218 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repaired
2014-07-07 15:15:58, Info                  CBS    Scavenge: Package store indicates there is no component to scavenge, skipping.

Hi,
First, I would suggest you using last known good configuration:
Using Last Known Good Configuration
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-vista
if this cannot bring your Windows Vista back to good state, I suggest you perform in-place upgrade to fix the corrupted files:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Error occurred. Contact the administrator and report the exception ID

Dear All,
We are on EP 7 SP8. We just now performed a system copy and are right now done with the post installation activities. All seems fine but we are having a problem in the Navigation Windown Quick Create link on the left hand side. Here I am always getting an error: Error occurred. Contact the administrator and report the exception ID in the log: 001A4B066A940068000001B500002946000433EB006CFEAC
Can someone please guide me with how to remove this error.
Please let me know as we are stuck and need to give the system to the client.
Thanks a lot in advance.
Best Regards,
Rajeet

Hello
Can you see the defaulttrace file for more details?
Open up Visual Administrator and go to Log Viewer. Then open up the Defaulttrace file. Generate the same error message and look in the file for more details.
What do you see?
And of course.. What did you do to make this error ?
Best Regards
Kristoffer Engh

Query regarding handling and monitoring of OSB Errors in a specific manner

Hi,
I'm using
- OSB 10gR3 (10.3.1)
Context
To give some context, the setup I currently have a proprietory frontend client that is making XML/HTTP requests to OSB
which in turn is getting info from downstream systems.
I have no control over the behaviour/logic of the frontend client .. apart from knowing that it has a specific
request/response format.
So now to the issue..
The issue I'm facing is regarding handling of errors. Based on my knowledge of OSB, the error handling of the transaction has been
built along these lines
(Within the stage) If an error scenario's occurred, error is being thrown
(Within the error handler stage) Logging the error (using the 'Log' function .. with severity 'Error')
(Within the error handler stage) The response payload is being built .. so that the error can be reported to the frontend client
(Within the error handler stage) I'm doing a 'Reply with Success'
Now this does give me the expected behavior from the frontend client's perspective (... i.e. it receives the payload and displays whatever error that's occurred)
However from OSB's perspective, because I have done a 'Reply with success', the OSB Service Health Page ... (screenshot below) does not
increment the 'Errors' count for the respective proxy service ....
[OSB Service Health Page|http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/operations/monitoring.html#wp1107685] (Looking at Figure 3-8)
The only way I could achieve this was to set the error handler stage to 'Reply with Failure' (which would return HTTP 500) ...
The issue however is that, the proprietory frontend simply sees the incoming HTTP 500 code and doesn't read the return XML payload (containing the error details ..)
which beats the whole idea of being able to maintain some sort of traceability for the failed transactions.
So what I'm basically trying to find is .. that when an error occurs
- Some 'call' to make the during the error handler stage so that it registers as an error in the OSB Service Health Page.. and I can clearly
see the error count, etc for each of the proxy services
- After that being able to still use 'Reply with Success' ... so that the payload is being returned with HTTP 500 code...
so the frontend can read the payload ...
............. in essence, the idea being to register errors so that they can be monitored via the Service Health Dashboard ..but at the same time
being able to return the 'error details' payload successfully
With my limited (but growing) knowledge of OSB .. I've tried quite a few ways to achieve this with no success...
Would very much appreciate any help here ...
Lastly, if there is some way of achieving what I'm trying to get to above through different means, I'm open
to trying out alternate stuff.
Regards,
Himanshu

Hi Atheek,
Many thanks for the reply. Does appear to be a pretty neat way of doing it ..
One more clarification I'd like on this however ....
Given that I have a set up like this below
[External frontend client] <------> (1 Parent Service) <------> (2 Child Service)
(1 Parent Service) .... has error handler .. and all it does is 'Reply with success'
(2 Child Service) .... has error handler for particular stage
so...
2 Child Service - is doing the actual work (has error handler where custom error msg is being populated in $body)
1 Parent Service - is the one that is getting called by the external client (has error handler .. and all it does is 'Reply with success')
What I currently have is ..once the error occurs, I'm populating $body ... with the custom error message within the error handler
Previously I had 'Reply with Success' in the 2 Child Service's error handler and the custom error message would get returned to the external client.
Now, with the error handler only creating the custom error msg.... and 1 Parent service doing the 'Reply with Success' .. it doesn't appear
to return the $body .. with the custom msg that I'd populated .. in 2 Child Service's error handler.
Are the $body contents populated in 2 Child Service's error handler lost ...once the error propagates up to 1 Parent service's error handler ?
If yes... is there way of getting around it ? I could see for instance that the $fault message context has a 'user populated' Details variable
but the documentation covering this is sparse.
Regards,

Unity Connection 8.6.2 report error and issues

Hello,
I found some other hits on this error and tried the workarounds (restarting tomcat, and report data harvester) but am still getting "Unable to find any report data based on parameter(s)" for a certain timeframe on multiple reports when I know activity occurred in that timeframe.
User Phone login report, Outcall Billing Detail Report, others.
CUC version is 8.6.2.20000-2
Problem is during this timeframe someone dialed into system and changed the transfer extensions to various LD numbers throughout an entire day and the reports aren't showing these outcalls. Call Manager CDR data show the calls being placed from Unity VM ports and the Unity Conversation Manager traces I grabbed for the timeframe show the calls to those numbers to. I'm just trying to match up with a report and figure out if there is some other log or trace file I can look to determine for sure the caller logged in to the voicemail box and changed the transfer extension on it. (guessed the voicemaill password). The failed log in report doesn't even show the failed login attempt in output from traces below. The transfer extension dest addr was different on the transfers on this same mailbox. Have locked down the system since but want to get better grip on this with the reports and traces.
I looked over the CUC 8.6.2 SU1 and SU2 release notes and not seeing any resolved bugs for these matters either.
Here are some samples lines from Conversation Manager traces:
00:32:46.399 HDR|02/04/2013 ,Significant
00:32:46.399 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=E68CA6DB3CAE4118BE9F9612BD3540A9
00:33:55.006 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:33:58.955 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
00:34:37.090 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=9DB394E443A3419FA0020BC9D1A92806
00:34:50.403 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,CDL,11,CCsCdlImsAccess::AuthenticateSubscriber: Cannot authenticate user: JOESMITH IMS Result Code: 1 on line 108 of file CdlIms/src/CsCdlImsAccess.cpp: Error: 0x80046505 Description: E_CDL_SP_EXEC_FAILURE
00:34:50.403 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,CDE,3,Authentication Failed for Subscriber 555123 (Src/CsCallSubscriber.cpp 2969)
00:34:50.404 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,-1,-1,An invalid password entered when trying to log into a user mailbox. Details - [].
00:36:29.331 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:36:33.484 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
00:44:53.444 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=FEB6975B82284F37A161CD66ECBA61C6
00:45:20.019 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:45:24.121 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
Thanks

Hello ebergquist,
As advised we could try to run a report before an upgrade was performed to verify if it will pull the information, which in the event it does we would be matching the bug, therefore access the CUC CLI and type the following command: file get install *
You will be required to have an SFTP available for the file transfer and port 22 open on the sftp client.
Once you receive the files you would need to check system-history.log, below is an example.
=======================================
Product Name -    Cisco Unity Connection
Product Version - 8.5.1.12900-7
Kernel Image -    2.6.9-89.0.20.EL
=======================================
02/24/2013 13:35:02 | root: Boot 8.5.1.12900-7 Start
02/24/2013 16:03:45 | root: Install 8.5.1.12900-7 Success
Once you check the time stamp and date of the upgrade try to gather a report for a time range before the upgrade was performed, even though they might be overwritten, there still could be a possibility that it succeeds.
If this bug is not the issue then you might want to take into consideration:
1. Make sure that the service ReportDB is [STARTED] in the output of the command: utils service list.
2. If you have Digital Networking on your server make sure there is no stalled replication. Go to RTMT (Real Time Monitoring Tool)> Syslogs> Select on the dropdown your server> Doble click on Application logs> CiscoSyslog. You can then do a manual search or sort with the filter option:
Severity: Error
App ID: CuReplicator
Hit apply. Below is an example:
Date: Feb 19 08:01:15
Machine Name: LAB1111
Severity: Error
App ID: CuReplicator
Message: : 1151681: LAB1111.corpnet2.com: Feb 19 2013 08:01:11.662 UTC : UC_UCEVNT-3-EvtReplicatorStalledReceiveReplication %[ClusterID=][NodeID=LAB1111]: Detected stalled replication receiving from location LAB1111. Waiting for missing USN 2222. This situation may indicate network connectivity problems.
3.Make sure that replication is working properly in the cluster. You can check them via the following commands: showcuc cluster status    and   utils dbreplcation runtimestate
For the TransferEx that you state changed to ceros -> TransferEx=0x00000000=S_OK , this is just a hexadecimal value that is returned stating that the transfer that took place during the call was successful, in this case the actual transfer was to the following destination -> TransferEx destAddr='715551231234', and was during a call to ->calledID='555123' , this does not have to do with the actual change of a transfer number performed by a user.
Those traces won't be enough you will have to additionally set: ConvSub, level 3   and CDE, level 16 so that you may see output in the traces as the example posted in the previous thread.
Traces would be the path to follow in order to verify the user that changed the transfer rule, as this is as i understand the goal your pursuing.
However if it is of any help, another way to get on hold of the numbers that were updated on the Transfer Rule is to use the User Data Dump tool, this information reflects changes regardless of whether it was done via TUI (Telephone User Interface) or GUI (Graphic User Interface). For more information on the tool go to:
http://ciscounitytools.com/Applications/CxN/UserDataDump/Help/UserDataDump.htm
Traces are extensive to be reviewed if done manually, however you can do a text search with a tool as Notepad ++ to look for keywords as "NewTransferNumber =" or "CDE,16,Transfer allowed", once you find this you check the call GUIDwhich is the reference number of the call and that exists during the entire length of the call, whether it is while a person is leaving a voicemail or the user is accessing his/her's inbox. This would speed up your search.
So as explained in the first thread you would then do another text search returning all possible matches with that callGUID.
Now if you get to the very beginning of the call you would see something like:
Line 13712: 18:58:05.156 |24720,CCIE-1-001,0C9C97BDF5F444F0B535D231C32DDCB4,Arbiter,-1,Incoming Call [callerID='2199' callerName='' calledID='6789' redirectingID='' lastRedirectingID='' reason=1=DirectlastReason=1024=Unknown] port=CCIE-1-001 portsInUse=1 ansPortsFree=1callGuid=0C9C97BDF5F444F0B535D231C32DDCB4
In this example you see my test user callerID='2199' calling the Pilot number 6789 which is the voicemail button
calledID='6789, and the what type of call is it whether Forward or Direct, when logging to voicemail you are going to see Direct which is going to match the Direct Routing Rules and send the call to the attempt sign in conversation.
The other approach is a rule out method between the Audit traces and the User Data Dump tool.
So let's say you have a baseline document that states all of the Transfer numbers for all users.
If the User Data Dump reflects a different number and the Audit logs do not show any change, starting from the time the baseline was created and the point of time where the number was changed, then you could deduce the change was done via TUI (Telephone User Interface). Unfortunately you wouldn't be able to tell who did the change in this case.
Nevertheless, remember that a user may have for example an Alternate Extension so the change might not necessarily be done from the office phone: "Alternate extensions can make calling Cisco Unity Connection from an alternate device—such as a mobile phone, a home phone, or a phone at another work site—more convenient. When you specify the phone number for an alternative extension, Connection handles all calls from that number in the same way that it handles calls from a primary extension (assuming that ANI or caller ID is passed along to Connection from the phone system). This means that Connection associates the alternate phone number with the user account, and when a call comes from that number, Connection prompts the user to enter a PIN and sign in."
Best regards,
David Rojas
Cisco TAC Support Engineer, Unity
Email: [email protected]
Phone: 1-407- 241-2965 ext 6406
Mon, Wed, and Fri 12:00 pm to 9:00 pm ET, Tue and Thu 8:00 am to 5:00pm ET
Cisco Worldwide Contact link is below for further reference.
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

Error while running script HyperV - Dash Board - VM and Storage Report

Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommand

Hi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Boot up of Windows Server 2012 Essentials seems slow (extended Please Wait screen) and there are errors in Health Report

Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======

Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: ‎00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon.

Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

Hello together,
System: Solution Manager 7.1 Sp7
since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
Name....................Errors raised during Event Calculation
Start Time..............20.03.2014 15:12:27 CET
End Time................20.03.2014 15:12:27 CET
Managed Object..........Monitoring and Alerting Infrastructure
Managed Object Type.....Technical Component
Rating..................Red
Category................Exceptions
Status..................Open
Opening the alert shows this:
E2E Alert Analysis Report:
This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
Analyze the error messages in the Application Log, as follows:
Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
When opening trx SLG1 I can see this error:
Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
80E0ED08ADA71DEEBFD84650DEF6421F not found.
How can I fix this?
Thank you very much.
Regards,
Ralph

Hi Ralph,
We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
Can you please tell me the procedure to resolve this issue?
Thanks.
Regards,
Deepika R

I click on itunes but doesnt open and says send error report or dont send

i click on itunes but doesnt open and says send error report or dont send

You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?

BitLocker Administration and Monitoring Reports Error

Similar Messages

Maybe you are looking for