Bitlocker with PIN and can't encrypt second drive

I have my OS drive encrypted, and have a boot PIN. All is well. I'm trying to encrypt the data drive in my laptop, and I'm getting a prompt
"The Group Policy settings for BitLocker startup options are in conflict and cannont be applied". The options are configured as this:
Configure TPM startup: Allow TPM
Configure TPM startup PIN: Allow startup PIN with TPM
Configure TPM startup key: Allow startup key with TPM
Configure TPM startup key and PIN: Allow startup key and PIN with TPM
I've tried setting the bottom two to not allow, but that doesn't seem to matter. I've verified that there are no domain GPOs that adjust these settings.
What am I missing?

Hi,
How did you encrypt the data drive? Which settings did you change?
For the Fixed Data Drives encryption, the group policy located here:
Computer Configuration\Windows Components\BitLocker Drive Encryption\Fixed Data Drives
It seems your operating system drive encryption group policy is correctly configured.
Use the command gpresult /h gpreport.html to export the group policy settings, check if there's any clue.
And, this is for your reference:
Best Practice for BitLocker
Regards,
Miya
TechNet Subscriber Support in forum. If you have any feedback on our support, please contact
[email protected]
Miya Yao
TechNet Community Support

Similar Messages

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

I have a similar problem. I restored my iPhone 5 to the latest available OS. After completing the process the phone never restarted. The phone was fully charged when I restored it but now refuses to charge past the red battery icon. I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone. The Apple logo does come on and the software fully loads. iTunes tells me the phone will restart but never does. I left it to charge all night but it never appeared to load the battery. This morning I went to the Grand Central Terminal apple store for help. A woman at the store plugged the phone in but it never charged. She absolutely refused to believe that I got my phone in UFD mode and loaded any software on. I don't think it is a battery issue. The only solution I was given was to buy a new phone. Repairing it was out of the question. At this point the phone is completely useless. Thanks in advance for the help.

I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much

I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much?

iOS: Importing personal photos and videos from iOS devices to your computer

I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

James,
I cannot get into Settings! It keeps reading out Slide to Unlock when I try to slide teh arrow to open the fpur digit entry boxes.

Flash Player 11.6.602.180 installed on Win 7 with IE and can never play videos from

Hi, I installed Flash Player 11.6.602.180 installed on Win 7 with IE and can never play videos from this site http://w3.newsmax.com/newsletters/uwr/video_hyman.cfm?s=al&promo_code=12CF6-1
any idea what this site is looking for ? thanks bill m

What do you see instead of the expected Flash content?

New Mac Pro with Lion and can't install FCP.

I got a new Mac Pro with Lion and can't install FCP that worked fine in SL. Is it not compatible? Is it really a PowerPC program??? I'm a videographer and rely on this software and to spend $300 to continue to use it after spending a lot more for this software 4 years ago! Tell me this is not the case and there is a solution to installing FCP.

How to run FCP 6 (FCS 2) under Lion.
The installer for FCP 6 (FCS 2) is a PPC app. The Programs themselves are Intel. If your trying to install FCP 6 (FCS 2) this work-around will work...
First you need to install Rosetta from your Snow Leopard OS installation disc:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html
After doing that you can install FCP 6 (FCS 2). Remember, after installing FCP 6 (FCS 2) you need to apply the updates. This has been discuss many times in the Final Cut Studio forum.
If your trying to install FCP version 5.1 (FCS 1) (a PPC app) and below your out of luck....
If you need further help, here is the URL for the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
R

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason

Hello, I'm using ubuntu with firefox5 and can not find the option to import my bookmarks file backup

Hello, I'm using ubuntu with firefox5 and can not find the option to import my bookmarks file backup

Is that Ubuntu 11.04?
Ubuntu 11.04 displays window menus in the control bar at the top of the screen<br />
Click on Bookmarks/Show All Bookmarks then move your mouse to the left upper corner toward Firefox Web Browser.<br />
You'll get pop up menu (Organize, Views and Import and Backup).<br />

My ipod comes up with a green screen when i turn it on. I did once eject it safely like a flash drive instead of through itunes. What exactly is wrong with it and can it be fixed?

My ipod comes up with a green screen when i turn it on. I did once eject it safely like a flash drive instead of through itunes. What exactly is wrong with it and can it be fixed?

What exactly is wrong with it and can it be fixed?
If you have AppleCare and/or iPod Nano is still under warranty, give them a call. If not, take the computer to your local Apple Store or AASP. The staff will tell you what is wrong w/it and let you know if it can be fixed after it is examined.

Can I use second drive from my G5 in a Mac Pro?

Does anyone know whether I can transfer the second drive in my G5 Power Mac to an opend rive bay in a Mac Pro?
Thanks in advance
Rod

Daniel,
Rest assured your 2-3 yr old SATA drives will work. An "ATA" (EIDE or PATA) will not work. There is a tight fit, but nothing to prevent using any SATA drive.
Your G5 drives will work just fine. Drives that are newer, SATA II (3Gb/sec) will run slightly better, and the Mac Pro has support for things like NCQ.
Four drive "sleds" are included, each with the necessary screws for attaching a SATA drive. The 250GB Seagate 7200.9 drive included with the computer had SATA-only power connections, while a 80GB Maxtor SATA drive from our Power Mac G5/1.8 had both SATA and traditional power connections, but it, too, fit into the supplied sockets when the sled was pushed into place.
Serial ATA Drive Interface
The Mac Pro comes standard with one 7200 rpm, 3 Gbps Serial ATA (SATA) disk drive and three additional 3 Gbps SATA slots for adding hard disk drives. The SATA drives interface through an AHCI 1.1 controller that supports advanced SATA-II features Native Command Queuing (NCQ) and PHY power management. NCQ increases performance on random workloads by allowing the drive to re-order commands to reduce seek time and increase transactional efficiency.
In addition, the Mac Pro has two unpopulated 3 Gbps SATA buses for expansion. Looking at System Profiler, all 6 SATA busses seem to be active
For more information on SATA, see Serial ATA International Organization.
For information on the AHCI controller, see AHCI Specifications.
Also, take a look at the "Do It Yourself" pdf:
http://www.apple.com/support/manuals/macpro_diy/
Mac Pro 2GHz 2GB WD Raptor Mac OS X (10.4.7) G4 MDD WD 320 OEM 9600 1.75GB SoftAID 3

Can an encrypted USB drive be used with the Airport Extreme?

I would like to keep an encrypted USB drive hooked up to my Airport Extreme (A1354) so that I can use it for a hand archive of documents I might need to reference on the road or conveniently within my home, mainly because it would be handier than having to plug and unplug a USB device into whatever computer I'm using, and would allow my wife to do the same with her computer. I know most internet providers provide a service like this, but I figured why not just do this with my Airport Extreme?
I've read posts from people who have taken encrypted USB volumes generated from their MacBook Pro, and plug that USB device into the Airport Extreme. The Airport recognized the device exists, but it is you can't actually use it as an encrypted volume. This seems like a flaw on the part of Apple if you can't do this, as this device is a much more expensive solution that what most wireless routers provide.
Has anybody figured this one out?

Doubtful it's going to work.
Does it see the same disk if it's formatted just Journaled (ie, not encrypted)?
The tehnical article isn't entirely clear . . . it just says Mac OS Extended: AirPort Extreme (802.11n) and Time Capsule: USB storage device supported formats and protocols
It was last modified June 14, 2011, a couple of weeks before Lion was released with the ability to encrypt drives.
Note that ExFAT is supported on Macs effective with 10.6.5, but not Airport Extremes; there's no reason to think encryption is any different.

HT1341 I have a new mac pro with Mountain Lion 10.8.1 but cannot connect to my Canon 6000B printer and can't find a driver download on the net - can anyone help on this?

I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?

dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's.

Can't remove the screen lock by PIN and can't use the screen to receive calls

Hello, I have a brand new SONY Xperia , Model Number D5803, Android version 5.0.2. , Baseband version 8974-AAAAANAZQ-00063-42, Kernel version 8974-perf-g3f600d1. , Build number 23.2.A.1.62.
I set a screen lock by PIN. However when I receive calls I can’t take them, because the screen in locked.
I tried to turn off the screen lock, but when I select the “ Screen lock” menu and after entering the correct PIN, the following items are not active “None”, “Slide” and “Pattern” . So I can't select “None”
The only active items are “PIN” and “Password” .
Please advice how to remove the screen lock by PIN. I hope this will help to be able to receive calls.
Thank you

To enable None and Swipe options, you need to go to Settings -> Security -> Clear credentials. Then those options will become active again.
However, you should be able to take calls even when you have PIN security, can you describe what shows on the screen when you have an incoming call while screen is locked?
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

I upgraded to Mavericks and can't find a driver to work with my EPSON Perfection 4990 scanner. The Epson site says to update thru my mac but it there is nothing there. Any suggestions?

I upgraded to Mavericks and can't get my Epson Perfection 4990 scanner to work. I had gotten it to work with a driver I downloaded from EPSON with Mountain Lion

Hi...
Epson is vorking on updating drivers and utilities for this scanner.
From the epson site :
"Description:
An OS X 10.9 compatible Scanner Driver and EPSON Scan Utility for this model is not yet available but is coming soon. Please check back for availability."
So, until then you can only use the basic scanning provided by Image Capture.
Alternatively take a look on vuescan.
Regards
/Dennis

Bitlocker with PIN and can't encrypt second drive

Similar Messages

Maybe you are looking for