Biztalk message transmission issue

Microsoft.ServiceModel.Channels.Common.ConnectionException: Details: ErrorCode=RFC_OK. ErrorGroup=RFC_ERROR_LOGON_FAILURE. SapErrorMessage=Timeout. AdapterErrorMessage=. ---> Microsoft.Adapters.SAP.RFCException: Details: ErrorCode=RFC_OK. ErrorGroup=RFC_ERROR_LOGON_FAILURE.
SapErrorMessage=Timeout. AdapterErrorMessage=.
   at Microsoft.Adapters.SAP.RfcClientConnection.Open()
   at Microsoft.Adapters.SAP.SAPConnection.Open(TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   a
TVS Apache
what is the root cause..plz help me any one plz

It is basically connection issue. Not able to connect target system that is why timeout error
Microsoft.Adapters.SAP.SAPConnection.Open(TimeSpan timeout)..
Can you check here
1) All related services are up/running fine or not? .. like..Proxies.RealProxy
2) Permission : Configured credential have access to target system.
3) If possible also check the target system error logs.
Regards
Suman

Similar Messages

Message transmission through esb fails

Hi All,
I have a scenario, where in i am trying to put a message into the JMS File based Queues. The message is successfully read by the JMS Adapter in esb and it tries to call the bpel process. when it is trying to do so, i am getting the following error message.
<operationQName>JCIAsyncRtrSystem.Soap_CallingADP.initiate</operationQName>
<errorMessage>An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message transmission failure,response code: 500........</errorMessage>
Any pointers to resolve the above error would be greatly helpful.
Thanks in advance.

Have you had this working in the past? if so have there been any recent changes?
What I would do is deinstall the ESB and redeploy it. It looks like there is some issue connection to the BPEL process.
It is also recommended to use the fastpath and not web services, have a look at the following link
http://www.oracle.com/technology/products/integration/esb/files/esb-presentation-bpel-fastpath.pdf
cheers
James

Message Transmission Transport Exception in B2b 11g

Hello b2bgurus,
I am working on a outbound flow using RosettaNet exchange protocol. The message sent from oracle b2b reach remote TP. But the the state of the message is MSG_ERROR. We get exception message as response from remote TP.
In the logs i noticed few error messages like
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1005
StackTrace oracle.tip.b2b.transport.TransportException: [IPT_HttpSendConnectionRefused] HTTP connection is refused.
     at oracle.tip.b2b.transport.TransportException.create(TransportException.java:94)
[2011-03-31T05:52:19.197-06:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@142219e7] [userId: <anonymous>] [ecid: 0000IwBjgzpESOTuu8bADH1D_56O00011A,0] [APP: soa-infra] [dcid: a65da66a7bc245f6:-2f10c1aa:12f0b5fe6be:-7ffd-0000000000001b8f] B2B Label:PCBPEL_11.1.1.3.0_GENERIC_RELEASE: Informational -: B2B-50025: Repository error: Exception [TOPLINK-6027] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.QueryException[[
Exception Description: Query sent to a unactivated UnitOfWork.
Query: ReadAllQuery(oracle.tip.b2b.model.instance.BusinessMessage)
[2011-03-31T05:52:19.249-06:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@142219e7] [userId: <anonymous>] [ecid: 0000IwBjgzpESOTuu8bADH1D_56O00011A,0] [APP: soa-infra] [dcid: a65da66a7bc245f6:-2f10c1aa:12f0b5fe6be:-7ffd-0000000000001b8f] Problem getting Queue Table for Queue : IP_IN_QUEUE
[2011-03-31T05:52:19.259-06:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@142219e7] [userId: <anonymous>] [ecid: 0000IwBjgzpESOTuu8bADH1D_56O00011A,0] [APP: soa-infra] [dcid: a65da66a7bc245f6:-2f10c1aa:12f0b5fe6be:-7ffd-0000000000001b8f] [IPT_MsgCannotBeSent] AQ message cannot be sent.
[2011-03-31T05:52:19.259-06:00] [soa_server1] [WARNING] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@142219e7] [userId: <anonymous>] [ecid: 0000IwBjgzpESOTuu8bADH1D_56O00011A,0] [APP: soa-infra] [dcid: a65da66a7bc245f6:-2f10c1aa:12f0b5fe6be:-7ffd-0000000000001b8f] [[
Message Transmission Exception
Transport Error Code is OTA-AQ-1001
StackTrace oracle.tip.b2b.transport.TransportException: [IPT_MsgCannotBeSent] AQ message cannot be sent.
     at oracle.tip.b2b.transport.TransportException.create(TransportException.java:94)
[2011-03-31T05:52:19.260-06:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@142219e7] [userId: <anonymous>] [ecid: 0000IwBjgzpESOTuu8bADH1D_56O00011A,0] [APP: soa-infra] [dcid: a65da66a7bc245f6:-2f10c1aa:12f0b5fe6be:-7ffd-0000000000001b8f] B2B Label:PCBPEL_11.1.1.3.0_GENERIC_RELEASE: oracle.tip.b2b.transport.TransportException: [IPT_MsgCannotBeSent] AQ message cannot be sent.[[
     at oracle.tip.b2b.transport.TransportException.create(TransportException.java:94)
[2011-03-31T05:52:19.261-06:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@142219e7] [userId: <anonymous>] [ecid: 0000IwBjgzpESOTuu8bADH1D_56O00011A,0] [APP: soa-infra] [dcid: a65da66a7bc245f6:-2f10c1aa:12f0b5fe6be:-7ffd-0000000000001b8f] Informational -: B2B-50025: Repository error: oracle.tip.b2b.transport.TransportException: [IPT_MsgCannotBeSent] AQ message cannot be sent.[[
     at oracle.tip.b2b.msgproc.DbAccess.enqueueIPMessage(DbAccess.java:4485)
Caused by: java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds
BEA1-7C72C9CF4888E08EC522
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1609)
Caused by: weblogic.transaction.TimedOutException: Transaction timed out after 30 seconds
BEA1-7C72C9CF4888E08EC522
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1607)
Informational -: B2B-50025: Repository error: oracle.tip.b2b.transport.TransportException: [IPT_MsgCannotBeSent] AQ message cannot be sent.
     at oracle.tip.b2b.msgproc.DbAccess.enqueueIPMessage(DbAccess.java:4485)
     at oracle.tip.b2b.msgproc.Notification.deliverException(Notification.java:1298)
Caused by: java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds
BEA1-7C72C9CF4888E08EC522
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1609)
Though im in middle of testing, just curious to know about these errors.. Have anybody faced this kind of issues? I saw few forums abt B2B-50025: error. Please let me know how to debug these issues

I see two exceptions here -
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1005
StackTrace oracle.tip.b2b.transport.TransportException: [IPT_HttpSendConnectionRefused] HTTP connection is refused.
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:94)This exception has occured while transmitting the document to Trading Partner perhaps on HTTP endpoint. From the error it seems, HTTP endpoint was not available when Oracle B2B tried to send the message to it.
The message sent from oracle b2b reach remote TPBy default Oracle B2B retries 3 times to deliver a message. Perhaps it failed to send the document in first or second attempt but could send it in later attempt(s) and that's why your TP have received the message.
But the the state of the message is MSG_ERROR. We get exception message as response from remote TP.That's why your request message has been marked as error. Check the exception response detail and try to find why your TP's B2B sending exception response. If you are not able to identify the exact issue why exception response came back, ask your TP. You may also paste the exception response content here if you need any help from us.
Exception Description: Query sent to a unactivated UnitOfWork.
Query: ReadAllQuery(oracle.tip.b2b.model.instance.BusinessMessage)This exception is coming after first exception and it is coming because Oracle B2B is trying to enqueue the exception message to IP_IN_QUEUE but transaction has already timed out. For this you need to increase the JTA timeout value. By default it gets set to 30. Try after increasing it to 150
For increasing JTA timeout value, login to Weblogic Admin Console as admin user, click on the domain name in Domain Structure at left side of page, in configuration tab goto JTA subtab and set the value of "Timeout Seconds" from 30 to 150. Save the change and retest your configuration. You should not see this exception any more.
Regards,
Anuj

WHAT ALL MESSAGE'S ISSUED WHILE CREATING PO

Sir,
ply let me know after saving the po i want to know what all messages were issued while creating the po.
Like "warning" or "information" message
where can i see this
regards
amey

Hi,
PAth- Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages...
Here are few message type:
Contract has different purchasing organization &     W
Validity period of contract does not start until &     W
Validity period of contract expired on &     W
Target value of contract & exceeded by & &     W
Net price for item & taken from conditions     W
Purchase requisition & item & already deleted     W
Scheduled quantity & & greater than target quantity & &     W
Quantity smaller than invoiced quantity &     W
Target quantity exceeded by & &     W
Not possible to determine a consumption account     W
Release date lies in the past     W
Base unit of measure & adopted from material master record
Release date: next workday is &     W
Contract target value & reached     W
Please only use plants with company code &
Order unit copied from material master record     W
Hope it helps.
Utsav..

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Errors Message while issuing the material in MB1A i.e unrestricted material

Hi Expert,
I want know the Message while issuing the material in MB1A we are getting the error unrestricted material, so what is the reason of error.(i.e there is no stock available or any other give me the reply as soon as possible)
Regards,
Ram Rathode

You are not clear. What is the error message that you get?

Message transmission medium

Hello Friends,
Can you please tell me the procedure to achieve this.
How can you determine the message transmission medium while the
requirement subroutine (Requirements Output Control T-Code VOFM ) is running.
FORM KOBED_601.
get message transmission medium
ENDFORM.
FORM KOBEV_601.
get message transmission medium
ENDFORM.
Regards
Marco M

I think you handle this by handling the subrc and the condition types.
Check the following thread.
Re: Output Control
Hope it helps.

Message transmission medium (nacha)

hi,
may i know nacha = 8 (special function) means what?
in what situation i can use 8?
thanks

Hi
it is the Message transmission medium which Specifies how the output will be produced.
You can specify, for example, that the output is printed or that it is produced and sent by other means, such as fax, electronic mail, or electronic data interchange (EDI).
You may use this, when other mediums (from 1 to 7 and A, T) are not useful
means for any other special function defined by the client.
Reward points if useful
Regards
Anji

Message Transmission Transport Exception

Im getting this this exception while putting my flat file data in FTP from B2B.The folder has rights for writing a file but still B2B throws an error while writing a file in this folder.
This log is from b2b.log file.
Message Transmission Transport Exception
Transport Error Code is 504 unknown security mechanism
StackTrace oracle.tip.transport.TransportException: Unable to establish SSL session on control channel due to 504 unknown security mechanism(504)
at oracle.tip.transport.basic.ftp.FTPAgent.login(FTPAgent.java:551)
at oracle.tip.transport.basic.ftp.FTPAgent.init(FTPAgent.java:571)
at oracle.tip.transport.basic.FileSource.init(FileSource.java:185)
at oracle.tip.transport.basic.FileSource.<init>(FileSource.java:110)
at oracle.tip.transport.basic.FileSender.send(FileSender.java:119)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.io.IOException: Unable to establish SSL session on control channel due to 504 unknown security mechanism(504)
at oracle.tip.transport.basic.ftp.FtpSocketFactory.createSSLTLSSession(FtpSocketFactory.java:627)
at oracle.tip.transport.basic.ftp.FTP.connect(FTP.java:465)
at oracle.tip.transport.basic.ftp.FTPClient.establishFtpSession(FTPClient.java:155)
at oracle.tip.transport.basic.ftp.FTPAgent.login(FTPAgent.java:524)
... 12 more

Hi Venkat,
From B2B log it seems that your B2B is trying to connect to this end-point using FTPS (also known as FTP Secure and FTP-SSL). FTPS is an extension to the commonly used File Transfer Protocol (FTP) that adds support for the Transport Layer Security (TLS) and the Secure Sockets Layer (SSL) cryptographic protocols.
Make sure you have selected "FTP" as Transport Protocol in Transport configuration of your TP's DC.
Cross check the delivery channel configuration of your TP again and make sure that you have not enabled any of below (If you do not want to use Transport and Message security) -
1. nonrepudiation of receipt
2. nonrepudiation of origin
3. encryption
4. transport security
5. compression
As I mentioned earlier also, try with HostName and IP both.
Paste the complete B2B log in debug mode here / mail to my id (in my profile).
Regards,
Anuj

Messages were issued when costs were calculated (see log)

Hi,
When I am creating the production order ( T Code: co08 , MTO scenarios and with reference to sale order ) but i am getting these error messge.Error when calculating costs see log like:
Messages were issued when costs were calculated (see log)
Message no. CK262
and also iam not getting planned cost .in the production order i saw log worning message like
Object was not costed
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
o     Items in the BOM
Display BOM
o     Operations in the routing
o     Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.
pls give me clarification ASAP
Regards
SAPCO

Hi Hisapgaru,
The error on product costing can be cause by several message which can be caused by poor master data maintenance. It does not mean, the error are found on every message line, you have to analyze the material number that involve in the message using the information provided by log message (procedure).
To analyze product costing in a comprehensive way is by using CK11N. By this t-code you can display the product cost result from 3 pespective: Cost element, costed BOM or cost component.
You can event check the product costing parameter from this CK11N/CK13N(display product costing). Without doing analysa to product costing, you cannot point out what cause the problem.
Solve the problem from product cost planning side first, then after calculation free of error, you can go back to production order activity.
Best regards,
Irhasni

SOLAR01 - assign message to issue

In SOLAR01, I would want to assign message to issue, however we could not do so, as when we list the message to be assigned, none could be found.
Strangely, this can be done from transaction SOLUTION_MANAGER > Issue Management > Issues.
Anyone encountered this before ?

Hi,
Since your current stack level is unknown, perhaps this note maybe of interest to you, 1162628
Cheers,
SH

Message Transmission Failure

Problem Description: When a PO is created and released output message is created. More often then not it is message status is green which indicates successful transmission of message. However this green status only means successful transmission to Fax server (In case of fax output). But if it fails to send fax to vendor after multiple redails this is not communicated back to the buyer.
Failure notices are being communicated to SAP and can be seen in BASIS. But this is not further communicated to the buyer.
My question: Is there any standard configuration which will communicate this failure to the buyer? Or a custom program has to be written by a developer for this communication? Is there any other solution to this which can be used?
Communication that I'm talking of would be an email to buyer in SAP inbox.
Message was edited by:
Bhaveshkumar Mistry

Hi,
there is no standard SAP method of monitoring this.
The system assumes that the send was successful and it is the Fax software that should be issuing warnings when a send fails, not SAP
This is a bit outside my experience but I am pretty sure that you have to rely on error logs etc. from the fax transmission software, there is no standard link back to SAP to transmit a warning email.
Steve B

BizTalk SMTP Relay Issue

We go to send mail via SMTP from all of servers, we are only able to send mail to @Dell.com addresses only.(same network)
We would not able to send to all address (like an @Microsoft.com or an @csc.com address)
I am able to send an email to all address through dot net application but not Biztalk
Please share your thoughts how to resolve the issue

I hope your .Net Application sending e-mail is NOT OUTLOOK? :D
From the BizTalk Server can you do an interactive SMTP session with the SMTP server and check if relay is permitted? If you get relay denied then very clearly the SMTP Server configuration requires modification. (the responses from the SMTP server are in
BOLD)
> telnet <your smtp server name/ip> 25
220 <your SMTP Server name> Microsoft ESMTP MAIL Service, Version: 7.5.7601.17514
ready at Fri, 6 Mar 2015 11:45:03 +0530
HELO <your BizTalk Server FQDN>
250 <your BizTalk Server FQDN> Hello [<ip of your BizTalk Server>]
mail from: <some-email-address>@dell.com
250 2.1.0 <some-e-mail-address>@dell.com....Sender OK
rcpt to: <[email protected]>
What is the response? do you get "250 2.1.5 <[email protected]>" or "relay denied".
Either way you should get someone who know mail & messaging involved to help to ensure that it is not a SMTP issue.
I agree with Ashwin on this NOT being a BizTalk related issue.
Regards.

BizTalk Configuration 2013 issue - Error in Group configuration

Hi,
I am configuring BizTalk 2013 in a Virtual machine and SQL server 2012 in another Virtual machine.
I have successfully configured the SSODB database. while configuring the Group's i am getting following error.
" exception of type System.EnterpriseServices.TransactionProxyException was thrown".
The following configuration was done already as a post installation steps.
1. MSTDC was enabled in SQL Server with XA transaction and all pre requiestee
2. Windows firewall was off in Both BizTalk and SQL Server . But we enabled the DTC In in BizTalk server and DTC out in SQL Server VM.
Do we need to check any configuration or what is the next step to proceed with the success ful configuration.
We are not able to identify the problem.
Regards, Aboorva Raja R Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Hi Raja,
The issue what you see is a
well document DTC issue in BizTalk. DTCTester would be the tool to start with. Otherwise try the suggestions as suggested here in this MSDN article.
MSDN: Troubleshooting Problems with MSDTC.
this issue also occurs if you have not created SQL Alias to communicate with remote SQL Server using Non-Standard Port. Follow the steps documented in the following article to create a SQL Server Alias on the client machine to connect to SQL Server machine:
Steps required is in middle of this article, search for "Error Configuration Framework]Feature: [Group] Failed to configure with error message [Exception of type 'System.EnterpriseServices.TransactionProxyException' was thrown"
Installing BizTalk Server 2010
in a Basic Multi-Computer Environment: Preparing and install prerequisites on BizTalk Server 2010 machine
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

R3PROD2B1ITEM - problem with message transmission

Hello,
last week I tried to make a data transfer using prepared biu R3PROD2B1ITEM. I followed all instructions for this scenario (defining landscapes, import scenario etc.). Test connections to the R/3 side and Business One from B1I were successful. Then I made some changes in item master data on R/3 side and awaited for new transmitted messages in B1i. However I made several changes in master data, only one IDOC message (error) was appeared in B1i, the other changes was not transmitted. The transmission was very irregular.
I use:
1. SAP Business One 2004C - patch 31
2. B1i - patch 02
3. SAP R/3 version 4.6C (Release Kernel 46D; Patches Level 2228, OS = AIX 5.3).
R/3 Components:
- SAP_BASIS 46C;
- Packet Type
AOP: ST-PI 2005_1_46C: patch 0003
COP: (SAPKB46C48)
Are these R/3 settings sufficient for B1i? Which version or patch is neccessary?
Thanks in advance for your answers.
Michal
Could you write me, has already anybody used this predefined scenario successfully?

Eddy,
thanks for your answer. I have looked into B1IMessage Logs and I found out that Sender ObjectType is missing.
What are the next steps to solve this issue?
In menu Extra -> Directory -> com.sap.b1i.repository I found:
ObjectType.xml B1.2004_BP Id read;
ObjectType.xml B1.2004_DFT Id read;
ObjectType.xml B1.2004_GR Id read;
ObjectType.xml B1.2004_ITM Id read;
ObjectType.xml B1.2004_PINV Id read;
ObjectType.xml B1.2004_PO Id read;
ObjectType.xml B1.2004_SO Id read;
ObjectType.xml B1.2005_BP Id read;
ObjectType.xml B1.2005_DFT Id read;
ObjectType.xml B1.2005_GR Id read;
ObjectType.xml B1.2005_ITM Id read;
ObjectType.xml B1.2005_PINV Id read;
ObjectType.xml B1.2005_PO Id read;
ObjectType.xml B1.2005_SO Id read;
ObjectType.xml DEBMAS05 Id read;
ObjectType.xml DELVRY03 Id read;
ObjectType.xml INVOIC02 Id read;
ObjectType.xml MATMAS03 Id read;
ObjectType.xml ORDERS05 Id read;
ObjectType.xml BusinessPartner!!B1.2004!!2 read;
ObjectType.xml BusinessPartner!!B1.2005!!2 read;
ObjectType.xml Customer!!*!!DEBMAS05 read;
ObjectType.xml Delivery!!*!!DELVRY03 read;
ObjectType.xml Draft!!B1.2004!!112 read;
ObjectType.xml Draft!!B1.2005!!112 read;
ObjectType.xml GoodsReceipt!!B1.2004!!20 read;
ObjectType.xml GoodsReceipt!!B1.2005!!20 read;
ObjectType.xml Material!!*!!MATMAS03 read;
ObjectType.xml Material!!B1.2004!!4 read;
ObjectType.xml Material!!B1.2005!!4 read;
ObjectType.xml PurchaseInvoice!!B1.2004!!18 read;
ObjectType.xml PurchaseInvoice!!B1.2005!!18 read;
ObjectType.xml PurchaseOrder!!B1.2004!!22 read;
ObjectType.xml PurchaseOrder!!B1.2005!!22 read;
ObjectType.xml SalesInvoice!!*!!INVOIC02 read;
ObjectType.xml SalesOrder!!*!!ORDERS05 read;
ObjectType.xml SalesOrder!!B1.2004!!17 read;
ObjectType.xml SalesOrder!!B1.2005!!17 read;
ObjectType.xml BusinessPartner!!B1.2004 read;
ObjectType.xml BusinessPartner!!B1.2005 read;
ObjectType.xml Customer!!* read;
ObjectType.xml Delivery!!* read;
ObjectType.xml Draft!!B1.2004 read;
ObjectType.xml Draft!!B1.2005 read;
ObjectType.xml GoodsReceipt!!B1.2004 read;
ObjectType.xml GoodsReceipt!!B1.2005 read;
ObjectType.xml Material!!* read;
ObjectType.xml Material!!B1.2004 read;
ObjectType.xml Material!!B1.2005 read;
ObjectType.xml PurchaseInvoice!!B1.2004 read;
ObjectType.xml PurchaseInvoice!!B1.2005 read;
ObjectType.xml PurchaseOrder!!B1.2004 read;
ObjectType.xml PurchaseOrder!!B1.2005 read;
ObjectType.xml SalesInvoice!!* read;
ObjectType.xml SalesOrder!!* read;
ObjectType.xml SalesOrder!!B1.2004 read;
ObjectType.xml SalesOrder!!B1.2005 read;
ObjectType.xml *!!DEBMAS05 read;
ObjectType.xml *!!DELVRY03 read;
ObjectType.xml *!!INVOIC02 read;
ObjectType.xml *!!MATMAS03 read;
ObjectType.xml *!!ORDERS05 read;
ObjectType.xml B1.2004!!112 read;
ObjectType.xml B1.2004!!17 read;
ObjectType.xml B1.2004!!18 read;
ObjectType.xml B1.2004!!2 read;
ObjectType.xml B1.2004!!20 read;
ObjectType.xml B1.2004!!22 read;
ObjectType.xml B1.2004!!4 read;
ObjectType.xml B1.2005!!112 read;
ObjectType.xml B1.2005!!17 read;
ObjectType.xml B1.2005!!18 read;
ObjectType.xml B1.2005!!2 read;
ObjectType.xml B1.2005!!20 read;
ObjectType.xml B1.2005!!22 read;
ObjectType.xml B1.2005!!4 read;
Michal

Biztalk message transmission issue

Similar Messages

Maybe you are looking for