Biztalk Server 2013 does not support Windows Server 2012 R2

is there any document or statement from MS that States "Biztalk Server 2013 does not support Windows Server 2012 R2"

Hi Mohit,
I haven't come across any document, but there is a blog from Microsoft about it.
http://blogs.msdn.com/b/biztalknotes/archive/2013/10/29/biztalk-2013-compatibility-with-latest-platforms-of-microsoft.aspx
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

Similar Messages

Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."

I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?

Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang

How do i delploy on hosted server which does not support crystal. Is RAS ?

have to put a solution on a public hosted server. it does not support crystal . cannot add to GAC
if i use RAS(or cr 2008 server) on another server . Web app works on public server but points to my RAS server. Do I still need components on the public server. if I do this will not work,
any ideas
John

many thanks. there is some tendancy to cloud hosts. all you get is ftp access and .net ompersonation.
just drop the webisite in. so no MSI use which also rules out merged modules
thanks
john

OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigale

because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP]

HP does not support Windows 8 Consumer Preview

think those who ask questions on why this does not work, that does not work, no Win8 drivers or printers etc for WIN8 need to realize that this is only a consumer review release, not even a beta, you installed it at your own risk as Microsoft says.
If you read the initial posted here by Walin within this forum it says: HP does not support Windows® 8 Consumer Preview...
so maybe reading it may provide you with insite
http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/Welcome-to-the-HP-Windows-8-Consumer-Preview...

https://discussions.apple.com/message/21546508#21546508 check this out

I purchased Premiere Elements 13. Elements does not support Windows Vista which is our operating system. I have Elements 12 and never had this problem.

I purchased Premiere Elements 13 & Elements does not support Windows Vista which is our operating system. I have Elements 12 and never had this problem. What are my options? Do you have a compatible program for WinVista similar to Premiere Element?

deniseu
This is not Adobe. Please do not duplicate threads. I have answered one of at least 3 of your threads currently appearing at the top of the list of threads in the Adobe Premiere Elements Forum tonight. Please see
I purchased Premiere Elements 13 and it is not compatible to Win Vista which is my operating system. What are my options?
New to Premiere Elements 13....it does not support Windows XP, Windows Vista, and OSX 10.7.
Also see
Removed features and unsupported file formats | Adobe Premiere Elements 13
In your other thread which I have cited above, I have posted a list of choices ahead of you. There is no workaround to get Premiere Elements 13 to support Vista, XP, or OSX 10.7 that has ever surfaced.
ATR

Exchange Server 2013 SP1 Install on Windows Server 2012 R2

I am trying to install Exchange 2013 SP1 onto a Windows Server 2012 R2. I get an error message that the operating system is not supported. I have installed all the prerequisite.

Does that mean that you can't install Exchange 2013 Sp1 with a Remote Desktop Role together included with Server 2012 R2?
Or is it possible to restore the Remote Desktop Role afterwards?
You can't install any build of Exchange 2013 on any server that has the RDS Role installed. So in other words, this is not a "limitation" with Exchange 2013 SP1 and Windows Server 2012 R2.
Additional Reading, check out: Exchange OWA/Activesync conflicting with RD Gateway
role
Martina Miskovic

Satellite Pro L10: sound card does not support Windows 7

Hi
i have a Satellite Pro L10 so i installed a Windows 7 on my system but my laptop can not support Windows 7.
I need update of sound card for Windows 7.
The model of sound car is Conexant CX20468-31 AC97 Audio Sound Card.
Please help me

Hi buddy
What to say first of all you will not get official drivers for this notebook for Win 7 or Vista.
This notebook is oldie and I doubt the drivers will be released.
Reading through this forum threads Ive noticed that most of the user use the Vista driver on Win 7 OS.
Maybe you should google for the Conexant AC97 Vista driver and should try a Vista driver on Win 7
Good luck

Lion Server does not support Windows 7 clients?

I have several clients who have Windows 7 workstations and Mac OS Lion servers. They cannot connect to their shares using any of the server accounts. I just installed Lion clean, bought Lion server and cannot connect to the shares from Windows 7 (Pro 64bit). I can connect from Windows XP Pro workstation. This is a major problem. I have read of some ways of changing the security settings in the bowels of Windows 7 to allow it connect (it is noted that these also say it will not work on Windows Home) but so far none of these methods have for me or my fellow techs. Not to mention that if to connect a Windows 7 client to a Mac we have to get in a muck with the registry every time - even if this were successful - it is a terrible way to support Windows.

This has been madness. So many alchemist fixes around Google for what seems to be a common problem: edit the registry, alter security settings, configure OpenDirectory, kiss a frog. What happened to the idea of sharing a folder on the LAN and getting back to work?
How do I confirm the string that serves as my Lion Server's FQDN?
On a (perhaps) related matter, I am confused because in my PC's "Network" list I see my Lion server as "MACMINI-0302EC" which seems like a generic machine name plus partial MAC address, but I've given the server a customized name in the server's System Preferences...

SAProuter does not start, Windows Server 2008 64

I cannot get SAProuter to start on a Windows Server 2008 64-bit server. I used the following version of SAProuter:
SAPROUTER 7.10 - Windows Server on x64 64bit
- I was able to add the service correctly using the following command:
ntscmgr install saprouter -b <drive>:\usr\sap\saprouter\saprouter.exe -p "service -S <port> -r"
- I configured the service to logon as the <system number>adm account.
When I try to start the service I receive the following error:
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.
When I check the Application event log I see the following error:
Activation context generation failed for "f:\usr\sap\saprouter\saprouter.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
What is the issue?
Edited by: Jeff Kinard on Jul 14, 2010 1:21 AM

Hi,
Wrong forum I reckon!
Anyway probably you need to check out SAP Note 1375494, most likely that you need to apply the the MS patch mentioned in the note & the attached PDF
Regards
Chris

MY IOS does not support EKU Server-Auth/Client-Auth

Hello,
I have a cisco router with Software (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T8.   im trying to set it up as my CA Server where I need to enroll my AnyConnect clients.
But while I trying to configure my crypto pki server command, I do not see   EKU Server-Auth or EKU Client-Auth   feature
can any one tell why it does not have this feature ??

it was added into 12.2T.    but for me it does not have this feature available . any ideas ?

Exchange Server 2013 does not deliver mail as they arive.

I need Help and guidance on this problem. I have installed Exchange server 2013 with SP1 on Server 2012. Install Went perfect no error. It on a server with 2 TB storage. 16G
memory. Exchange 2013 is the only application running on the box. DNS service is also running on the box. I can see the mail arrive in the mail Box Queue with the Queue Viewer and they would just sit there and then after a 15 to 30 min delay it release the
mail to the mail boxes. The only error or warning I am seeing in the logs are the 6002 warning. Any suggestion would be greatly appreciated.

Please share message header of one of the delayed message. It will help to narrow down the issue.
Do you see any connection failures in connectivity logs.
Do you have multiple 2013 servers in your exchange environment ?
Lets fix it.
Received: from Xchngsvr.A.com (xxx.xxx.xxx.xxx) by Xchngsvr.a.com
(xxx.xxx.xxx.xxx) with Microsoft SMTP Server (TLS) id 15.0.847.32 via Mailbox
Transport; Fri, 25 Apr 2014 13:31:33 -0400
Received: from Xchngsvr.a.com (xxx.xxx.xxx.xxx) by Xchngsvr.a.com
(xxx.xxx.xxx.xxx) with Microsoft SMTP Server (TLS) id 15.0.847.32; Fri, 25 Apr
2014 12:30:44 -0400
Received: from xchngsvr.a.com (xxx.xxx.xxx.xxx) by Xchngsvr.a.com
(xxx.xxx.xxx.xxx) with Microsoft SMTP Server id 15.0.847.32 via Frontend
Transport; Fri, 25 Apr 2014 12:30:37 -0400
Received: from mia0vm-cass03.colo.sonicwall.com ([208.17.117.5])
by
xchngsvr.a.com (SonicWALL 7.4.5.1391)
with ESMTP id 201404251630370000228;
Fri, 25 Apr 2014 12:30:38 -0400
Received: from mail1.fieldsolutions.com ([98.129.95.107])
by
mia0vm-cass03.colo.sonicwall.com (SonicWALL 7.4.4.8439)
with ESMTP id
201404251631070343409; Fri, 25 Apr 2014 09:31:07 -0700
Received: from localhost (localhost [127.0.0.1]) by mail1.fieldsolutions.com
(Postfix) with ESMTP id F32731031781
for <[email protected]>; Fri, 25 Apr 2014
11:31:06 -0500 (CDT)
MIME-Version: 1.0
To: <[email protected]>
From: Field Solutions <[email protected]>
Subject: WIN#: 649890 NEW Signage - Reply-To: <[email protected]>
Content-Type: multipart/alternative;
boundary="=_747eac72d0ea92652b25d7d469d7165b"
Message-ID: <[email protected]>
Date: Fri, 25 Apr 2014 11:31:06 -0500
X-Mlf-KeyWords: preapproved,dollars$$$,pay,toner,expectations,fl,dollars,guarantee,voltage,confi
X-Mlf-Language-Detected: NoLanguageFilter_English
X-Mlf-Connecting-IP: 50.244.134.141
X-Mlf-Country-Code: US
X-Mlf-Rules: rn;7.24
X-Mlf-Rules-Pos-Features: WORD_voltage_2.97;WORD_configuration_2.51;WORD_inputs_2.50;WORD_documentation_2.
X-Mlf-Rules-Neg-Features: WORD_preapproved_-1.85;SUBJ_dollars$$$_-1.74;SUBJ_pay_-1.56;WORD_toner_-1.53;WOR
X-Mlf-Sliderbars: N4,B4,S4,L4,Q4,G4,A4,I4
X-Mlf-Version: 7.4.4.8439
X-Mlf-Threat-History: nothreat
X-Mlf-Threat-Detailed-History: nothreat;none;none;none
X-Mlf-UniqueId-History: i201404251631070343409
X-Mlf-Connecting-IP: 208.17.117.5
X-Mlf-Country-Code: --
X-Mlf-Threat: nothreat
X-Mlf-Threat-Detailed: nothreat;none;none;cloud-nj
X-Mlf-UniqueId: i201404251630370000228
Return-Path: [email protected]
X-MS-Exchange-Organization-Network-Message-Id: 5ea15b9c-561d-4a2a-d03e-08d12ebad75d
X-MS-Exchange-Organization-AVStamp-Enterprise: 1.0
X-MS-Exchange-Organization-AuthSource: Xchngsvr.a.com
X-MS-Exchange-Organization-AuthAs: Anonymous
There is only one Exchange server in the Organization

ICloud 3.0 does not support Windows 2008 r2

When I install iCloud control Panel on Windows 2008 r2, it shows me only support Windows 7& 8, how to solve this issue?

Hello mcclxxi,
It sounds like you would like to change the format of the date in side your cells in Numbers. You can do this with the Format Inspector as Numbers has its own formats to use. This part of the Numbers 3.0 help site will assist you with this:
Date and time
Select a cell or a range of cells.
In the Cell pane of the Format inspector, choose “Date & Time” from the Data Format pop-up menu.
Choose a format from the Date pop-up menu.If you choose None, no date is displayed in the cell, even if a date is entered and used in date and time calculations.
Choose a format from the Time pop-up menu.If you choose None, no time is displayed in the cell, even if a time is entered and used in date and time calculations.
If you don’t enter both a date and a time, Numbers adds a default value for you. For example, if you type, “1:15 PM,” Numbers adds today’s date by default.
The Smart Cell View at the bottom of the window shows you the actual value of both the date and the time for a selected cell, even if you choose to show only one in the table.
From: Numbers 3.0 Help
http://help.apple.com/numbers/mac/3.0/#/tan23393f3a
Thank you for using Apple Support Communities.
Take care,
Sterling

Server Admin does not manage mini server

Running 10.7.3 server on two MacMini's on the same LAN. Both running their apps smoothly. Unique IP's managed via router's DHCP service, along with other networked devices. No IP address conflicts visible; good router. No other LAN problems and other NAS's on the net are behaving. Both mini's are accounted for within the router's DHCP table.
When Server Admin 10.7.3 is launched, both mini's appear in the left window of 10.7.3 server admin under 'servers', however, only one makes itself available for administration; the other has a tilde in a circle icon next to its name and will not come ready when clicked. Both servers are completely manageable using ARD; both desktops mount remotely and are accessible. Ditto when using Apple's stand-alone ScreenSharing app.
Question: why is one server not manageable by the 10.7.3 server admin app, and the other is? I've installed and checked all system versions and network settings on both mini's and they're the same. One mini is a generation behind the other, but both are late models.

Running 10.7.3 server on two MacMini's on the same LAN. Both running their apps smoothly. Unique IP's managed via router's DHCP service, along with other networked devices. No IP address conflicts visible; good router. No other LAN problems and other NAS's on the net are behaving. Both mini's are accounted for within the router's DHCP table.
When Server Admin 10.7.3 is launched, both mini's appear in the left window of 10.7.3 server admin under 'servers', however, only one makes itself available for administration; the other has a tilde in a circle icon next to its name and will not come ready when clicked. Both servers are completely manageable using ARD; both desktops mount remotely and are accessible. Ditto when using Apple's stand-alone ScreenSharing app.
Question: why is one server not manageable by the 10.7.3 server admin app, and the other is? I've installed and checked all system versions and network settings on both mini's and they're the same. One mini is a generation behind the other, but both are late models.

Firefox disabled by flash plugin telling me to update to new version. I can't update to the lastest Adobe flash player 11, because it does not support Windows Vista 64-bit. So now what am I supposed to do?

I have Windows Vista 64-bit. I can't play on-line games on Pogo. I already contacted Pogo & they told me to update flash player. Firefox disabled by plugin for flash. I can't get the most updated Adobe flash player because it doesn't support 64-bit.

See:
* http://kb2.adobe.com/cps/000/6b3af6c9.html

Biztalk Server 2013 does not support Windows Server 2012 R2

Similar Messages

Maybe you are looking for