Black bars in Windows 7 with mac mini and AMD 6630M HD

I bought a new i5 Mac mini.
I installed win 7 home premium 32 bit on it without a problem using boot camp from Lion. However windows does not totally fill the screen. There are black bars on all side of the display. About an inch thick.
I have the mini connected via HDMI to my sharp Aquos tv @ 1080p.
What can I do to fox this? My previous mini did not do this with nearly the same setup. There is now where to downlaod drivers for the AMD 6630M HD card in this mini.

Hi PaulJO
I have the same problem when I tried downloading and installing the catalyst suite software from AMD web site, it told me that my graphic card was not compatible. Which I know is!!
Any help on getting the driver?!?!

Similar Messages

I'm trying to set up Continuity with mac mini and iPhone 5s and not working

I'm trying to set up Continuity with mac mini and iPhone 5s and not working, bluetooth not pairing

Your Mini is not supported.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity

Problem with Mac Mini and Panasonic PT-AE700 projector

I just bought a brand new Mac Mini and intended to connect it through hdmi to my Panasonic PT-AE700 projector (with a 10 m hdmi-hdmi cable and a dvi-hdmi adapter). However there is no signal recognized by the projector.
Any suggestions? I have tried with two different dvi-hdmi adapters between the Mini and the cable. Both work fine with my MacBook Pro, but with the Mini there is no signal.
Mac Mini Mac OS X (10.4.7)

Thanks again BSteely for your answer.
Unfortunately I still haven't been able to get anything out from the projector through HDMI.
However, I've found someone with a similar problem. It seems the problem is the lenght of the HDMI cable (which in fact is closer to 15 m than 10 m). HDMI is designed to handle at least those 10-15 m runs, but the problem seems to be DVI, which is only capable of something around 5 m. Since I'm converting from DVI to HDMI, I'm subject to DVI's limitations. And the MBP seems to have better capability of handling the weaked signal than the Mini.
Read more: http://www.avsforum.com/avs-vb/showthread.php?t=712218
Gefen should have an amplifier (HDMI Super Booster) that could solve the problem. I just ordered it to see if it could help in strenghtening the signal and solve the problem for me.
Read more: http://www.gefen.com/kvm/product.jsp?prod_id=2939
If someone has any experience from the booster, please let me know.

Problem with Mac mini and HP w2207h

I have a new Mac mini and a HP w2207h screen. I have a problem with the resolution. The screen wants to be on 1680x1050, but when i turn that mode on, the screen is just blinking and you can't see anything. so i have to use the 1080p modus. But it's kind of blury. Can anyone help? Does apple has some kind of support mail??

Don't waste your time or money on the adaptors. I have a hp 2207h and I tried th dvi to hdmi and the dvi to vga, neither work, I still don't have a working monitor. Waited on the phone for tech support for 30 minutes. Then got a total line of crap.
This monitor works flawlessly with my comcast motorola hd cable box, with my sony dvd player, with my toshiba laptop, with my hp computer. But will not work with a mac mini... The only logical reason given the wide varity of equipment it will work on, is that apple does not support HDMI standards, if they did, it would work.
The apple does work on my 40 in tv. But thats not where I want it. So, this is useless to me. And after the line of crap I got from tech support, I'm thinking about quiting apple all together.
This ***, I was really excited about my first apple computer. Now after 4 hours, and nothing but frustration and no support at all from apple, I'm thinking about giving up and sticking with PC's from here on out. Worst experiance ever.
I may even switch to android and chuck my 4...

Pb screen fuzzy plugged with mac mini and hdmi cable

Hi all, I bought my first mac yesterday and I plugged it it this morning on my tv screen with an hdmi cable. I saw that the screen at the bottom where all the icones are is fuzzy. We set it up at the apple store and it was working well. Could you please help me.
Thanks a lot for your answer

Well, here's to a happy conclusion.
After bugging the local electronics store for two days in a row, I've found a working Full-HD TV.
Lessons learned:
a) Be thankful for stores where you can bring in your own computer and hook it up to the TVs on display.
b) Don't just glance at the manual.
After trying several TVs and not getting any good picture by either connecting by VGA (consistently showed slight ghosting with high-contrast colors) or HDMI (all TVs did cut off Dock and menu bar), neither the salespeople nor I had any idea what else to do.
The next day, it hit me: We had tried all kinds of setup/config selections from the TV's setup menu.
What we did NOT do was to simply try it with the "Zoom/Aspect" button on the remote - partially because that didn't work with the first model I bought.
So, Mac mini back into the suitcase, back to the store, "Ah, you again...", hook up the first TV set, press "Zoom", pick "Truescan", press "OK" -
Problem solved. Pixel-perfect alignment. => TV bought.
Just for those looking for a "known to work" answer: It was the Toshiba, XV 500 series, older model. It's running on "1920x1080 @ 60 Hz (interlace)", but since I'm using it as a monitor, the "interlace-only" doesn't bother me too much. No problem even when watching DVDs via the mini.
Image is stable, text is crisp and readable at 5-6 ft. distance, dimmed-down lamp is more than adequate even at minimum brightness since the room faces north. Low-power setting of the lamp makes for only 70 watts consumption instead of the rated 180+ watts.
Happy user here now

Mouse feels strange with mac mini and LG LED TV

Hi,
I recently bought a mac mini to use with my LG LED 42LM660T Smart TV. Connected via HDMI.
I have setup bootcamp with Windows 7 on the other partition.
The odd thing is that when on the OSX partition, the mouse feels terrible.
Its almost uncontrollable. Cant get any acuracy.
I have tried an Apple wireless mouse and a microsoft wired one, installed new drivers etc and still no difference.
The odd thing is that the mouse feels perfect on the PC partition.
I looked at a few other forum entries and some people said to change the settings on your tv, like put it into game mode.
I have tried but there is no difference and anyway, it wouldnt be perfect in the PC partition if this was an issue
Any help would be useful as without the PC partition this may as well be a brick.
Thanks
Tom

Right click the desktop - show view options
Icon size and text size can be changed here
On in a window - go Finder - View - Show View Options

Ideal network to share 2TB iTunes library with mac mini and iMacs by wifi?

Greetings,
Just made the move from pc to apple world. First time poster. Please feel free to suggest if this topic is better suited in another area.
I am looking for an ideal means of sharing my music library (+/- 1.5TB size) from my mac mini with my 2 kids iMacs.
The mac mini has an internal 80GB SSD and 4 GB RAM. It connects via ethernet to my Netgear WNDR 3700 wifi a/b/n router which connects to a Docsis 3 modem. Speed and signal strength is great.
My music library is currently backed up on a Seagate USB desktop HDD. My interim plan is to use USB to connect it to the mini. Long term plan is to migrate to a NAS system.
The kids iMacs (1x 2006 model with core duo and 1 x 20008 with core 2 duo) both run snow leopard 10.6.3 and access wifi signals for internet. Wifi signals ~16-20 Mbps strength.
Is there prefered method to share the music library with the kids by wifi? Only one way? do I need to add airport devices, or? It would be extremely difficult to provide ethernet to their rooms.
Thanks
Kenreau

kenreau wrote:
It would be extremely difficult to provide ethernet to their rooms.
have you consider *powerline adapters* _*such as these*_
here's an interesting read on the subject.
JGG

Does Final Cut Express 4 work with mac mini and other questions...?

I have a few questions I need help in answering... I would appreciate opinions on the following:
I am about to make a purchase of a new mac. I already have a mac mini PPC, but it is too slow...
Here is what I am thinking.
Mac mini, 2GB mem, 160GB hard drive. Will this new mac mini work with Final Cut Express 4?
Or should I go with the more powerful iMac?
I like to make movies on my mac but I hate iMovie 08 so I constantly use iMovie HD 06. Should I go to Final Cut Express 4 or just stick with iMovie HD 06?

There is no doubt that FCE 4 will run on an Intel mini - the GMA graphics processor is compatible. There is also no doubt that an iMac would give you somewhat better overall performance, though it's important perhaps to note that as complex as FCE is, it is actually a little less demanding on hardware than iMovie has traditionally been, so the difference between a mini with 2Gb RAM and a similarly equipped iMac will not be all that great in FCE, though it will become a little more noticeable if you continue to use iMovie 6.
The main reason for the performance difference between iMovie and FCE is that in order to provide a reasonably sophisticated video editing package that will run on very basic hardware, Apple relied heavily on caching techniques, meaning that while FCE basically spools from video and relies on CPU power, iMovie constantly moves data to and from the hard drive. The mini's hard drive is a (relatively) slow device in comparison to the iMac's - thus the iMac runs iMovie rather more seamlessly. In FCE, the difference is, as said, rather less clear unless you were to go for the top-end model.
If your budget can stretch to an iMac it makes sense to go that route simply because the extra power and overall performance (and the better graphics processor) will give you greater flexibility down the road. On the other hand, if funds are tight and you need to spend as little as reasonably possible, a mini will do fine, and is sufficient;y inexpensive that in a couple of years could be sold off and replaced without severe financial implications.
In terms of the choice between FCE or iMovie, beware that if you haven't used FCE before, the transition is not easy, and the learning curve for it is pretty steep. That said, it has far greater power and flexibility in terms of what you can achieve with it than has ever been possible with iMovie.
That said, for casual and home use, iMovie (version 6 at least) has plenty of power and tools for the majority of projects. iMovie 8 is, in many ways, deeply flawed for those who want that sort of power and workflow tools, being that it is designed for quick and easy creation of movies, not creative and considered productions. It has it's uses, but if you have experience with iMovie already, v8 is really not intended for you at all.
All that said, I've used iMovie 6 on systems will a lot less power than the current Intel minis, and have found it stable and workable, so I have no doubt it would work well on any current Mac.

Trouble with Mac mini and samsung 5 series tv

Hi there, have just bought a second hand mini and trying to hook it up to my samsung 5 serties tv!!! easy or so i thought!! iget the apple loading screen (grey one!) and then it goes blank and nothing else happens! has anyone got any suggestions? thanks in advance!

If you look through the threads here you'll find that this sort of issue has come up quite often, both with TVs and even with some monitors. Typically the problem is that once the system has booted to the point that the screen changed from the grey one with Apple logo, it's loading the preferences previously set in MacOS. When that happens, if the system has display preferences set that the display itself can't work with, the screen will generally go blank, or show a very distorted or rolling image. If your mini had previously been used with a relatively high resolution or refresh rate setting which your TV can't cope with, it means you need to reset the mini's preferences to something more basic, at least to get you going.
You can do this in a number of ways, but the easiest is probably to go ahead and connect the system to a computer monitor and boot it up, then set the display preferences to something very basic such as 800x600. If you don't have a computer monitor to connect to, then instead, boot the system into safe mode by holding the shift key down as the system boots. This should set it to a basic resolution the TV can manage. Open the display preference pane and set a 800x600 resolution.
If that still doesn't help, boot again (to computer monitor or into safe mode) and in the Finder's Edit menu, use the Find command to search for all instances of 'windowserver' (no quotes) and drag all instances found (there should be 3 or 4) to the trash. These are the files that tell MacOS what settings to use for the display, so trashing them will prevent the system using previously settings. After that, reboot normally. With those files missing, the Mac will create new ones when it boots and loads MacOS, giving you a usable display at low resolution. You should be able to work from there to get the correct resolution set for your TV.

TC in combination with mac mini and WIFI

Hello,
I am living in an apparment with provided internet - it used to be a cable modem. Now cable modem was deactivated by the owner and free WIFI was established in our house (but limited to three devices)
I connected my mac mini to the existing WIFI - no prob! Is is possible to create another WIFI with TC using cable connection between mach mini and TC?
If yes, please let me know how to set up the mac and TC.
Thanks!

What is this wifi for?
I have more than three devices which need WIFI connectio, unfortunatel!
If it is just to connect to the TC it is possible.. if you want to connect to the TC from the mini that is fine.. you do not need wifi for this.. just ethernet to the TC is fine.. so I just don't know what the wifi from the TC is for and if it requires internet access.
If you want internet access via the Mac, you can setup Internet Connection Sharing..
See OS X Mavericks: Share your Internet connection
It is a really poor setup though.. and tends to be unreliable, slow and means anytime the mini is off no internet to the other clients.
There are better ways to do things.
Put any wireless bridge, in front of the TC and use that to provide a wired connection. Apple Express can do this.. none of the other devices can. but wireless bridges are not hard to find and you can get cheaper ones than the apple.
This is what I tried, thanks to your recommondation! I connected the AirportExpress with the given WIFI and I've connected it to the TC via LAN cable, the TC now provides my own WIFI to all devices. But the mac mini, as well connected by cable to the TC does not have Internet access. To log on to the given WIFI I have to use a web-login (like in a hotel) but I have the impression that it doesn't work because of the hardware I have now connected. If you have any suggestions to this I would really appreciate it!
You will however not get out of the problem without creating more problems.. Internet access will be slowed and you will have double NAT issues.
I set the TC to bridge, no Double-NAT anymore.
Thanks for now, 75% achieved!

Problem with Mac Mini and LG Flatron monitor locked in 'power saviing mode'

Hi I bought my Mac Mini in July 2009 and have being having more and more issues with my monitor. Form the beginging the monitor had issues after the mac went to sleep. I have tried setting the exact refresh rate to 60 using SwitchResX, but now I can't get the monitor to display anything is stuck in 'power saving mode' - I have tried everything shutting down the moitor the Mac, disconnection the adapter, nothing works. BTW the monitor is fine I am using my PC laptop and the monitor to write this cry ofr help right now. Its a LG Flatron L222WS and I am using a mini display port to VGA adaptor.
I read somewhere that reverting to Mac OS 10.5.6 might do the trick - any other ideas?

Try starting in Safe mode and see if you can get the monitor to work again. If it gives a useable screen in Safe mode, go into Displays preferences and set the resolution to 1680 x 1050 and restart normally.
Hopefully that will get you back to where the monitor is working again with the mini.
There should be no relationship between a monitor's sleep habits and whether refresh is exactly 60Hz or not, so I wouldn't mess with SRX anymore to try and correct that problem.
http://support.apple.com/kb/HT1455

Problems with Mac Mini and Premiere Pro CC 2014

I am new to video editing with a background in graphic design and typically do short corporate videos.
I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
Here are my specs:
Processor: 2.6 GHz Intel Quad Core i7
Memory: 16 GB
Graphics: Intel HD Graphics 4000 1024MB
I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

I am new to video editing with a background in graphic design and typically do short corporate videos.
I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
Here are my specs:
Processor: 2.6 GHz Intel Quad Core i7
Memory: 16 GB
Graphics: Intel HD Graphics 4000 1024MB
I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

Home Theater with Mac Mini and Mac book Air

We are currently using our Mac Mini 2GHz Intel with our Sylvania HMDI TV connected with HDMI cable. The only downfall is that our desktop has to be close to our tv. I would like to put the desktop in our bedroom and use the new macbook air for tv watching downstairs. The questions is, how would I get all of my content from the desktop down to the laptop to view on tv.
We will also be using Plex 9 when we get a bigger harddrive. Will we be able to run that on the laptop if it is located on the desktop upstairs?
A run down of how someone else has thier home theater set up using something similar would be great!
Thanks in advance!

The Plex software bundle you download and install includes two components, Plex Media Server and Plex Media Manager. The former (PMS) needs to be running on your desktop all the time, the latter (PMM) is the client that can find the content on your network. When you run PMM on your laptop, it can see the content on any system running PMS on your network, and stream the content from there. The PMM is the 'Plex' you see in your Applications folder.
For more in depth help with setting up Plex, you should consult the Plex Forums.

Networking problem with Mac Mini and TIVO

this is what i want to do
move my recorded shows on my tivo series 3 over to my mac mini via my ethernet connect
my Tivo sees my pictures in I-photo as well as my pictures on Photobucket
but my Mac Mini will not see my Tivo
i downloaded Tivo Desktop and Tivo transfer as recommended
tivo transfer on my Mac Mini still will not see my Tivo
now they do recommenr Toast 9 for burning the videos
but i am not burning just transfering
my versio of Toast in version 8
i am asking this because do i need to buy toast 9 or is there something else preventing the Mac from seeing the tivo
remember the tivo DOES see the mac
thanks in advance for any help
i hope i posted it in the right area, networking seemed to br the closest

Don't waste your time or money on the adaptors. I have a hp 2207h and I tried th dvi to hdmi and the dvi to vga, neither work, I still don't have a working monitor. Waited on the phone for tech support for 30 minutes. Then got a total line of crap.
This monitor works flawlessly with my comcast motorola hd cable box, with my sony dvd player, with my toshiba laptop, with my hp computer. But will not work with a mac mini... The only logical reason given the wide varity of equipment it will work on, is that apple does not support HDMI standards, if they did, it would work.
The apple does work on my 40 in tv. But thats not where I want it. So, this is useless to me. And after the line of crap I got from tech support, I'm thinking about quiting apple all together.
This ***, I was really excited about my first apple computer. Now after 4 hours, and nothing but frustration and no support at all from apple, I'm thinking about giving up and sticking with PC's from here on out. Worst experiance ever.
I may even switch to android and chuck my 4...

2TB Time Capsule or External Hard Drive for use with Mac MINI and AppleTV

Hi,
My current setup is I have a 1TB Hard Drive linked to my intel Mac Mini via FireWire 400, the Mini shares my music and films through iTunes so that my AppleTV can pick them up.
All devices are connected to an AEBS 802.11n (early model) via Cat6 Gigabit cables.
As I have run out of space and am looking for a bigger drive, I wanted to know if I would be able to use the 2TB Time Capsule to hold my films and be able to stream them to the Mac Mini so that it may stream them through iTunes to the AppleTV.
The theory of if should work, as the devices are all Gigabit capable and connected by high quality Cat6 leads their shouldn't be network bandwith issues, I am just unsure of how quickly the TimeCapsule can read stored data from a hard drive and transmit, some of my films are HD and run 4GB plus.
The obvious answers is just to buy a bigger hard drive with FW400, however I would like to reduce the number of boxes I have under the TV, I plan to upgrade my AEBS to the latest one anyway so just thought it made sense to explore this option.
looking forward to hearing what you have to say.

Hello,
It should work in theory, but the disk access time of the TC is much slower. I was setup like you are with an external drive connected to a Mini via FW and I had true Gigabit transfer between computers.
When my hard drive failed I sold my Linksys gigabit router and bought a TC to reduce the number of boxes, but I soon learned that the read/write speed on a TC is a little bit faster than on a thumb drive! Not that great. All my machines are also connected with Cat6.
It's still OK to watch a movie though, but transferring 10+ Gb is a pain.

Black bars in Windows 7 with mac mini and AMD 6630M HD

Similar Messages

Maybe you are looking for