'black' on 23" HD Cinema Display is not 'black' on my Macbook Pro 15" disp

'black' on 23" HD Cinema Display is not 'black' on my Macbook Pro 15" disp - I'll edit a photo on my desktop cause its lots faster but what looks black on the display does not look black on my laptop. I don't think its calibration because I have put both on the same color profiles and there is no difference. Would the Cinema display just not be as bright/intense as the laptop display since its older? The Cinema display looks fine and hasn't given me any problems...
Any insights?
T

MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

Similar Messages

Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

Never mind, I solved it. Didn't know the converter needed a power source to operate (duh!) Now I have that, it works just fine.......

Apple 23" HD Cinema Display no longer working with new Macbook Pro

I bought a 23" used HD Cinema display the other day along with the ADC-DVI and DVI-Mini Display adapters. I had it hooked up and it was working perfectly for 3 days. Today my wife tried to connect her Macbook accidentally via the USB that is part of the ADC-DVI adapter which didn't work (why is that USB there anyway?). Then when she went to connect the external display back to my Macbook Pro it did not wake up after being connected. I have tried resetting the PRAM on the MBP and have disconnected and re-connected all connections but nothing will get the display working with the MBP anymore. When I connect and disconnect the mini-display plug into the MBP the MBP flashes the blue screen as it appears to be reacting, but that's it. I can't detect any display when I go into the display system preferences. Does anyone know how I can get the Apple Cinema display working again? Thanks for any help.

Ryan Nagy wrote:
Upon reflection, I think my issue is different. Probably should not have posted it here. As it turns out sometimes my display works, sometimes it does not. I think the power adapter has gone bad. A common occurrence here in Mexico where the power can fluctuate quite a bit. - Ryan
There are couple of long threads in the display section about problems with the power supplies on the 23" HD DVI. See this one for instance: https://discussions.apple.com/message/17981683#17981683
Mine one day just wouldn't turn on -- connected to an old G4 MDD and the Mini -- a bit of fiddling it would occasionally start up, sometimes not. Similar to what you described, the Macs would see it in System Profiler, but it just wouldn't turn on.
Based on that thread, I figured the problem was mostly likely the power supply. A local authorized repair place didn't have a spare for me to try, but the tech sniffed it and mentioned it the burnt electronics smell. LOL, I sniffed it and sniffed the power supply for my 20" DVI Cinema display -- indeed a weird smell.
Based on that thread, I decided to bite the bullet and buy a beefier 150" power supply for the 30" Cinema display, which Apple says in compatible with the 23". See: http://support.apple.com/kb/HT2803
I hooked it up, crossed my fingers, and it fired up right away. It's been working fine for about 3 months now. Cheaper than buying a new monitor.

27 LED Cinema Display Audio and Brightness when powering MacBook Pro

When my 27 LED Cinema Display is powering my (or another) 2009 13" MacBook Pro, I have experienced three issues:
1. The dropped audio problem other users have mentioned. Shutdown, then disconnect power/usb/displayport, then wait ~15s, then reconnect and reboot temporarily fixes the problem.
2. I also have the sluggish keyboard behavior when adjusting the volume that others have mentioned.
3. I have experienced shifts in display brightness which are obvious when the display is dimmed. I have disabled the ambient light sensor as well as any interfering power management or energy saver settings. Opening apps, scrolling and other normal activities seem to aggravate this behavior.
This last strange behavior inspired me to try using a power adapter for the MacBook Pro instead of display's laptop power connector. *Doing so seems to have resolved all three issues.*
It seems that this may indicate an underlying problem with the display's power supply. Can anyone confirm?

mmayo wrote:
I am having the same issues & with a 1 day old display. I am using a 15" MBP. The screen is killing me when it dims down when no lights are on. I didn't notice the issue when the screen is brighter with the lights on. Anyone know if this is a hardware or software issue? I'd like to utilize the ambient light sensor but not if its going to make my screen flicker when it is dim....
(1) I have never had any deaths associated with my screen, but on rare occasions my display's brightness will flicker when I manually adjust the brightness. The fix I have found for this is to increase the brightness one more setting or decrease it one more setting. Changing the screen from full dim to full bright and then setting the brightness I want sometimes helps, too.
(2) You can check whether this software update has been applied to your 27-inch:
http://support.apple.com/kb/HT4293
(3) Your Apple Service Provider could tell you whether your problem is related to hardware or software.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

17" Cinema Display doesn't work with new MacBook Pro

I have used a 17" Cinema Display with a MacBook Pro without problems for the last year. I just bought a new MacBook Pro and a Mini DisplayPort to DVI Adapter. Hooked it up and no display. Reconnected to my olf MBP without the Mini DisplayPort to DVI Adapter and it still works great. Any thoughts?

I have the same machine and the same drive (for about 6 months) they work fine.
The first suspect is the internal SATA cable, replace it.

How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

Hi everyone,
I recently purchased a brand new 15" MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
Bummer!
So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
I've looked around and haven't been able to find a good answer.
Thanks for your help!

Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

MSN Messenger uses wrong inbuilt webcam for video chat on triple screen set up. It uses a cinema display webcam not the iMac webcam.

For some strange reason if i attach my 2 apple cinema displays to my iMac to make a triple screen set up msn messenger video chat does work but it uses the apple cinema display inbuilt webcam and not the iMac webcam. Its annoying as i have to turn sideways to get into the video call view.
So i have a set up like this: an apple cinema display thunderbolt, then in the middle an iMac new then to the right of the iMac another apple thunderbolt cinema display. WWhen i use MSN messenger to make a video call it uses the inbuilt webcam on the far right apple thunderbolt cinema display and not the inbuilt webcam in the iMac in front of me, its annoying any ideas please.
If i unplug both side cinema displays MSN messenger uses the inbuilt camera on the iMac like normal but when i use extra screens it uses the webcam built into those and not the iMacs webcam.

I would try with another client like skype or something
and if it's only msn messanger which have the problem it may
be more of a question for ms's forum?

Apple Cinema Display is not reading or seeing...

Hello...
I would love to have your help on this situation.... My Apple Cinema Display is not reading or seeing my ipod adapter or my printer adapter at the back of the display. it is weird to see this happening now because it was working great until yesterday. I was like huh? how did this happen?
I tried to fix the mac with OS disc as well as Pro Tech Tool. they did not see anything wrong with it. think that the plug holes are worn out or burnt? thanks for your help... can email me with directions or explanations [email protected] (i rarely come in this boards unless I come up with a problem and i come here to check for information in this board...
It is Apple Cinema Display - LCD display - TFT - 20" - 1680 x 1050 (It is running strong for 6 or 7 years with no problems at all.)
thanks!

The USB circuitry sometimes fails in older Apple displays. This can affect the USB ports, computer control of brightness, and computer sleep. Sometimes unplugging all cables from the display for a few minutes will fix it for a while.

Can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.

hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
I noticed that thunderbolt and mini display port looks a like. So, my question is :
can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
thank you

ken94538,
no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro.

I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

If your MBair is a 2012 model, it has a Magsafe 2 power connection. The monitor probably has the old magsafe connection. If this is the case, you need this adapter.
http://store.apple.com/us/product/MD504ZM/A?fnode=5a

What to do if black berry bold 9900 contacts not fully syncing with macbook pro?

what to do if black berry bold 9900 contacts not fully syncing with macbook pro?

thanks for the advice
I have an I phone 4S that is having almost the same problem, and only some of the newly added contact of the phone are added to the address book, so not a big difference, and its not a solution to get read of all products only because we use apple.

New hard drive is not recognized by my MacBook Pro.

New hard drive is not recognized by my MacBook Pro. The supplier says I need to update my BIOS. True? How do I do that?
Hard drive: NN2-72-500-SSE Seagate Momentus 7200.4 (ST9500423AS) 500GB Laptop Hard Drive
Mac OS: Mac OS X Lion 10.7.5

I went through a similar issue with a Seagate Momentus 750GB HDD/8GB SSD with my late-2011 MBP. No matter what I tried, the machine would not recognize the drive.
To test it, I installed the drive in an old ThinkPad, and it worked fine. Then I tried installing it in my PS3, and the drive worked fine there, too. It was only the MBP which had issues.
I don't *think* Macs have a BIOS to update. But I know my MBP has issues with certain HDD's (including another external which works fine on other Macs and all Windows machines).
You might be able to find my thread by searching under my username, perhaps something in there will offer a tip. Otherwise, you might have to go the same route I did: install a WD Scorpio Black instead. Or upgrade to an SSD.
Good luck to you-

Samsung Omnia Mobile Phone does not connect to my MacBook Pro

Hi guys. I am after some advice please.
My Mac Book Pro is currently not allowing me to browse my Samsung Omnia phone by bluetooth.
It has worked previously however, it is not now. It recognises that the phone is there but when it comes to connecting it says "The connection failed or closed" - Would you like to attempt to reconnect or close this window?
I do not know how to get this to work and I cannot use the USB transfer wire as it is not compatible with Apple Macs.
I have some photos and files I would like to transfer over however, I cannot do so.
Any help much appreciated please.

Hi Elizaanne,
I understand you are having issues with HP Officejet 6700 Premium not connect to your Macbook Pro.
Sometimes the router needs to be cycled. I would unplug the router, turn off printer, turn off computer.
Turn back on router wait 5 min and turn on printer and computer.
Check on the printer if Wifi is SOLID.
From System Preferences, open Print and Fax or Print and Scan pane. If you see the printer listed
Click remove printer- button. It will ask for confirmation of delete printer.
Click the Add or + button, select the printer Bonjour Multifunction not Fax. Adding that should update the drivers.
If the Printer Wifi is not solid you will have to set it up again.
Press the Power button to turn on the printer.
Touch the Right Arrow to display the second navigation screen.
Touch Setup , and then touch Network .
Touch Wireless Setup Wizard
Then add it to you Mac 10.7.
I hope this helps.
Please feel free to contact me if you require further assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset. The green light comes on but no video.

my built-in isight camera will still not work on my macbook pro after completing smc reset. The green light comes on but no video.
Any Suggestions?

Restart the computer.

'black' on 23" HD Cinema Display is not 'black' on my Macbook Pro 15" disp

Similar Messages

Maybe you are looking for