Black screen is in interactive and interactive text (console) mode

I want to install Solaris 10 on HP Proliant DL380 G5. After installing drivers for Smart Array (from CPQary3.iso) I can't see this:
"Starting Solaris Interactive (graphical user interface) Installation.
You must respond to the first question within 30 seconds or the installer
proceeds in a non-window environment (console mode)".
The screen now is black in both modes: interactive and interactive text (console)
If I don't install CPQary3 then graphical user interface works good, but "No disks found" :)
What can I do with it?
Edited by: Blutang on Jan 14, 2009 2:07 AM

well the problem has been solved...hope this may help others having this issue.
i basically just let the battery run out, then connected the ipod to my laptop and voila...it reset and all is well again...
pretty random, but glad it is all working again.

Similar Messages

  • My ipod is showing a black screen, but will charge and make the notification noises. Any ideas on how to fix it

    My Ipod touch is just showing a black screen, it still charges and the notifictions still go off because I can hear them. It wont turn onto the lock screen it just stays black. I tryed letting the battery run down and left it for like 24 hours but nothing changed

    If the unit has NEVER been jailbroke, first try a system reset.  It cures many ills and it's quick, easy and harmless...  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • My kids pushed something and this message comes up on a black screen: Darwin/BSD (new-host-4.home)(console) Login:  What do I do to fix it?

    My kids pushed something and this message comes up on a black screen: Darwin/BSD (new-host-4.home)(console) Login:  What do I do to fix it?

    Maybe I've spoken to quickly, see this thread https://discussions.apple.com/thread/320663?tstart=0

  • TS1363 while updating my IOS to IOS 6 the updating process couldn't be completed for unknown reason and my iphone has nothing but a black screen with an apple and a meter that shows no progess. it completely froze!

    When updating my IOS 5.1.1 to IOS 6 and after the download completed the updating of the iphone couldn't be completed for unknown error and the device froze and all i have now is a black screen with an apple and a meter that shows no progress I can't switch off my iphone or do anything!!!

    Hi,
    I had a similar problem last week with my nice shiny 3 week old iPhone 6. I noticed the Apple logo was on the screen, but it did not progress like a normal boot up. I restarted the phone, and it showed the Apple logo, then a red screen then cycled back to the logo and kept looping. I got the phone to the iTunes connection stage by keeping hold of the power button and the home button until the apple logo appeared then kept holding the home button. iTunes recognised the phone, and wanted to restore, but this was unsuccessful  because the phone would keep looping to the red screen and iTunes failed. After loads of Apple support, I was told it was a hardware failure, and like you I live more than an hour away from the store. None the less, I made an appointment with the Genius bods, and they replaced the phone. They said they had never heard of the problem, but really, take a look at these forums and you will see that it is a common problem and I suspect they are keeping it under wraps...
    My issue is that as a disappointed customer with faulty goods, why should i have to stick to an appointment to get it replaced? What other store would you have to do this?
    The "Genius" didn't even want to see the phone powered up before offering a replacement... Oh, and it turned out they didn't have the exact same model as a replacement so they were going to send me out of the store empty handed.... I kicked off BIG time, and they very reluctantly gave me a phone from the sales stock, rather than the repairs stock..
    Not a happy Apple customer anymore, and I feel the more people who know about the lack of service and customer care the better. They need to get off there high horse and join the real world!

  • Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video?

    Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)

    You asked your question on the wrong forum. Try one for the Flash Player

  • Hello! I want to sell my iphone 3g because i have 3gs- i cleared the info in settings and now have black screen saying no service and usb port pointing to itunes - is that all i do ?

    Hello! I want to sell my iphone 3g because i have 3gs- i cleared the info in settings and now have black screen saying no service and usb port pointing to itunes - is that all i do ? i am pretty ignorant of computers- lol- i had read that i need to plug it back into itunes to verify it has all cleared out- i want to sell it on craigs list or ebay- i am really hurting for money right now- all your answers appreciated...

    It needs to be restored by someone. You can do it, and set it up as a new phone, or the buyer can do it.

  • My ipod touch 4 gen. has a black screen with a apple and under it is a load bar that is empty and wont load

    my ipod touch 4 gen. has a black screen with a apple and under it is a load bar that is empty and wont load

    Try here:
    iPhone and iPod touch: Frozen and unresponsive
    iPod touch: Hardware troubleshooting

  • IPhone 3GS stuck in a black screen with a cable and the iTunes logo in it. Extra bonus: error 1656.

    So, I got this problem with the black screen with a cable and the iTunes logo in it. I tried restoring it, but in the middle of the process, the iPhone turns off (and it is still connected to the computer) and I get an error message (1656). I already tryed the solution that I have to find the "hosts" file, but there's no "gs.apple.com" line to be deleted.
    What do I do?

    I tried to do this at least 4 times! the iTunes is running the restore but at the end he's failed.. he say there is an error ! I think number -1.

  • My iphone 4 is locked on a black screen with apple symbol and loading sign since last night, how do i fix this?

    my iphone 4 is locked on black screen with apple symbol and loading symbol since last night

    You need to restore the iOS using iTunes. Place the device into Recovery Mode and Restore the device
    Read here for instruction > http://support.apple.com/kb/HT1808

  • When i try to turn ipod touch on it stays on the black screen with the apple and nothing else happens. whats wrong?

    okay so just as i was typing this the problem resolved itself, but when i went to charge my ipod i noticed ot stayed on the black screen with the apple for a good 10 minutes, so i pressed buttons furiously (!!) and the screen went white and then back on to the screen with apple again. this contiinued for a good 4 tries then eventually went on to my lock screen (which is the very beautiful dom howard not that you know who that is and i dont even know any of you so i dont know why im typing all of this out but i really enjoy typing it's an incredibly exciting past time of mine but unfortunately i havent used capital letters) just wondering if it will happen again

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT2499 I ejected ACDs from my Mac Pro DVD player and now there is just a black screen with DVD player and the Apple insignia the bottom right corner. I can't get anything to turn on and shut this down. Got stuck. What do I do?

    On my MacBook Pro I finished using a CD and it ejected. Then I have a black screen just a DVD player showing on the bottom of a black screen. I can't do anything with my cursor at all nothing opens up and I don't know how to get that off the screen and start using the computer again – thanks for any help you can give me

    Hi there,
    You may need to force quit the application. Take a look at the article below for more information.
    Mac OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    -Griff W.

  • Intel hd graphics, black screen on tty switch and more

    Hi,
    This is my first post on the arch forums, after having used this wonderful distro for half a year. I look forward to being a more active user in the future.
    Last week, my laptop HD crashed and i had to re-install arch on a new one. With this came the 3.14 kernel, which I had been holding back at 13.12 previously.
    At first I expected something was off with the KMS, but now I am not sure anymore. I can start the system just fine, problems arise when I try to start X, then the screen goes black. Same problem arises if i issue lspci (odd huh?). If I use vgaswitcheroo to switch to the discrete readon, and then back again I can start X and issue lspci just fine. When X is started, I cannot turn it off again (black screen), or change into a vc (same black screen).
    I realize this is little to go on, but I would greatly appreciate pointers to what the problem could be and where to look for useful log/debugging information.
    Graphics hardware:
    Intel hd 3000
    Mobility Radeon hd 5470
    EDIT:
    Here is the Xorg.0.log file from a failing session:
    [ 223.612]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 223.612] X Protocol Version 11, Revision 0
    [ 223.612] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 223.612] Current Operating System: Linux lillkalle 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014 x86_64
    [ 223.612] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c14b180c-886c-4b56-8cbb-0fe1ea9571e5 rw acpi_backlight=vendor acpi_osi=Linux radeon.audio=1 quiet
    [ 223.612] Build Date: 14 April 2014 08:39:09AM
    [ 223.612]
    [ 223.612] Current version of pixman: 0.32.4
    [ 223.612] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 223.612] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 223.612] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 12 13:07:40 2014
    [ 223.663] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 223.663] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 223.697] (==) No Layout section. Using the first Screen section.
    [ 223.697] (==) No screen section available. Using defaults.
    [ 223.697] (**) |-->Screen "Default Screen Section" (0)
    [ 223.697] (**) | |-->Monitor "<default monitor>"
    [ 223.698] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 223.698] (==) Automatically adding devices
    [ 223.698] (==) Automatically enabling devices
    [ 223.698] (==) Automatically adding GPU devices
    [ 223.747] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 223.747] Entry deleted from font path.
    [ 223.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 223.761] Entry deleted from font path.
    [ 223.761] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 223.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 223.762] Entry deleted from font path.
    [ 223.762] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 223.762] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 223.762] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 223.762] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 223.762] (II) Loader magic: 0x804c80
    [ 223.762] (II) Module ABI versions:
    [ 223.762] X.Org ANSI C Emulation: 0.4
    [ 223.762] X.Org Video Driver: 15.0
    [ 223.762] X.Org XInput driver : 20.0
    [ 223.762] X.Org Server Extension : 8.0
    [ 223.762] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 223.763] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 223.777] (--) PCI:*(0:0:2:0) 8086:0046:1025:0365 rev 18, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    [ 223.777] (--) PCI: (0:2:0:0) 1002:68e0:1025:0365 rev 0, Mem @ 0xb0000000/268435456, 0xafee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 223.777] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 223.777] Initializing built-in extension Generic Event Extension
    [ 223.778] Initializing built-in extension SHAPE
    [ 223.778] Initializing built-in extension MIT-SHM
    [ 223.778] Initializing built-in extension XInputExtension
    [ 223.778] Initializing built-in extension XTEST
    [ 223.778] Initializing built-in extension BIG-REQUESTS
    [ 223.778] Initializing built-in extension SYNC
    [ 223.778] Initializing built-in extension XKEYBOARD
    [ 223.778] Initializing built-in extension XC-MISC
    [ 223.778] Initializing built-in extension SECURITY
    [ 223.778] Initializing built-in extension XINERAMA
    [ 223.778] Initializing built-in extension XFIXES
    [ 223.778] Initializing built-in extension RENDER
    [ 223.778] Initializing built-in extension RANDR
    [ 223.778] Initializing built-in extension COMPOSITE
    [ 223.778] Initializing built-in extension DAMAGE
    [ 223.778] Initializing built-in extension MIT-SCREEN-SAVER
    [ 223.778] Initializing built-in extension DOUBLE-BUFFER
    [ 223.778] Initializing built-in extension RECORD
    [ 223.778] Initializing built-in extension DPMS
    [ 223.778] Initializing built-in extension Present
    [ 223.778] Initializing built-in extension DRI3
    [ 223.778] Initializing built-in extension X-Resource
    [ 223.778] Initializing built-in extension XVideo
    [ 223.778] Initializing built-in extension XVideo-MotionCompensation
    [ 223.778] Initializing built-in extension XFree86-VidModeExtension
    [ 223.778] Initializing built-in extension XFree86-DGA
    [ 223.778] Initializing built-in extension XFree86-DRI
    [ 223.778] Initializing built-in extension DRI2
    [ 223.778] (II) "glx" will be loaded by default.
    [ 223.778] (II) LoadModule: "dri2"
    [ 223.778] (II) Module "dri2" already built-in
    [ 223.778] (II) LoadModule: "glamoregl"
    [ 223.779] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 223.891] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 223.891] compiled for 1.15.0, module version = 0.6.0
    [ 223.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 223.891] (II) LoadModule: "glx"
    [ 223.891] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 223.906] (II) Module glx: vendor="X.Org Foundation"
    [ 223.906] compiled for 1.15.1, module version = 1.0.0
    [ 223.906] ABI class: X.Org Server Extension, version 8.0
    [ 223.906] (==) AIGLX enabled
    [ 223.906] Loading extension GLX
    [ 223.906] (==) Matched intel as autoconfigured driver 0
    [ 223.906] (==) Matched ati as autoconfigured driver 1
    [ 223.906] (==) Matched intel as autoconfigured driver 2
    [ 223.906] (==) Matched modesetting as autoconfigured driver 3
    [ 223.906] (==) Matched fbdev as autoconfigured driver 4
    [ 223.906] (==) Matched vesa as autoconfigured driver 5
    [ 223.906] (==) Assigned the driver to the xf86ConfigLayout
    [ 223.906] (II) LoadModule: "intel"
    [ 223.916] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 223.954] (II) Module intel: vendor="X.Org Foundation"
    [ 223.954] compiled for 1.15.0, module version = 2.99.911
    [ 223.954] Module class: X.Org Video Driver
    [ 223.954] ABI class: X.Org Video Driver, version 15.0
    [ 223.954] (II) LoadModule: "ati"
    [ 223.954] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 223.955] (II) Module ati: vendor="X.Org Foundation"
    [ 223.955] compiled for 1.15.0, module version = 7.3.0
    [ 223.955] Module class: X.Org Video Driver
    [ 223.955] ABI class: X.Org Video Driver, version 15.0
    [ 223.955] (II) LoadModule: "radeon"
    [ 223.955] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 223.972] (II) Module radeon: vendor="X.Org Foundation"
    [ 223.972] compiled for 1.15.0, module version = 7.3.0
    [ 223.972] Module class: X.Org Video Driver
    [ 223.972] ABI class: X.Org Video Driver, version 15.0
    [ 223.972] (II) LoadModule: "modesetting"
    [ 224.011] (WW) Warning, couldn't open module modesetting
    [ 224.011] (II) UnloadModule: "modesetting"
    [ 224.011] (II) Unloading modesetting
    [ 224.011] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 224.011] (II) LoadModule: "fbdev"
    [ 224.012] (WW) Warning, couldn't open module fbdev
    [ 224.012] (II) UnloadModule: "fbdev"
    [ 224.012] (II) Unloading fbdev
    [ 224.012] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 224.012] (II) LoadModule: "vesa"
    [ 224.012] (WW) Warning, couldn't open module vesa
    [ 224.012] (II) UnloadModule: "vesa"
    [ 224.012] (II) Unloading vesa
    [ 224.012] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 224.012] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 224.013] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
    [ 224.013] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
    [ 224.013] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
    [ 224.013] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
    HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII
    [ 224.023] (++) using VT number 1
    [ 224.044] (II) [KMS] Kernel modesetting enabled.
    [ 224.046] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
    [ 224.046] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
    [ 224.046] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 224.046] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 224.046] (==) intel(0): RGB weight 888
    [ 224.046] (==) intel(0): Default visual is TrueColor
    [ 224.046] (**) intel(0): Framebuffer tiled
    [ 224.046] (**) intel(0): Pixmaps tiled
    [ 224.046] (**) intel(0): "Tear free" disabled
    [ 224.046] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 224.046] (II) intel(0): Output LVDS2 has no monitor section
    [ 224.047] (--) intel(0): Found backlight control interface acer-wmi (type 'platform') for output LVDS2
    [ 224.047] (II) intel(0): Output VGA2 has no monitor section
    [ 224.047] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 224.047] (--) intel(0): Output LVDS2 using initial mode 1366x768 on pipe 0
    [ 224.047] (==) intel(0): DPI set to (96, 96)
    [ 224.047] (II) Loading sub module "dri2"
    [ 224.047] (II) LoadModule: "dri2"
    [ 224.047] (II) Module "dri2" already built-in
    [ 224.047] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
    [ 224.047] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 224.047] (==) RADEON(G0): Default visual is TrueColor
    [ 224.047] (==) RADEON(G0): RGB weight 888
    [ 224.047] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
    [ 224.047] (--) RADEON(G0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
    [ 224.047] (II) Loading sub module "dri2"
    [ 224.047] (II) LoadModule: "dri2"
    [ 224.047] (II) Module "dri2" already built-in
    [ 224.047] (II) Loading sub module "exa"
    [ 224.047] (II) LoadModule: "exa"
    [ 224.047] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 224.068] (II) Module exa: vendor="X.Org Foundation"
    [ 224.068] compiled for 1.15.1, module version = 2.6.0
    [ 224.068] ABI class: X.Org Video Driver, version 15.0
    [ 224.068] (II) RADEON(G0): KMS Color Tiling: enabled
    [ 224.068] (II) RADEON(G0): KMS Color Tiling 2D: enabled
    [ 224.068] (II) RADEON(G0): KMS Pageflipping: enabled
    [ 224.068] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
    [ 224.070] (II) RADEON(G0): Output LVDS-1-0 has no monitor section
    [ 224.073] (II) RADEON(G0): Output HDMI-1-0 has no monitor section
    [ 224.200] (II) RADEON(G0): Output VGA-1-0 has no monitor section
    [ 224.202] (II) RADEON(G0): EDID for output LVDS-1-0
    [ 224.202] (II) RADEON(G0): Printing probed modes for output LVDS-1-0
    [ 224.202] (II) RADEON(G0): Modeline "1366x768"x60.0 69.50 1366 1414 1446 1466 768 771 777 790 -hsync -vsync (47.4 kHz eP)
    [ 224.203] (II) RADEON(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
    [ 224.203] (II) RADEON(G0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 224.203] (II) RADEON(G0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 224.203] (II) RADEON(G0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 224.203] (II) RADEON(G0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
    [ 224.203] (II) RADEON(G0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
    [ 224.203] (II) RADEON(G0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 224.205] (II) RADEON(G0): EDID for output HDMI-1-0
    [ 224.330] (II) RADEON(G0): EDID for output VGA-1-0
    [ 224.330] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 224.330] (II) RADEON(G0): mem size init: gart size :3fdee000 vram size: s:20000000 visible:1fba0000
    [ 224.330] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 224.330] (==) RADEON(G0): DPI set to (96, 96)
    [ 224.330] (II) Loading sub module "fb"
    [ 224.330] (II) LoadModule: "fb"
    [ 224.330] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 224.340] (II) Module fb: vendor="X.Org Foundation"
    [ 224.341] compiled for 1.15.1, module version = 1.0.0
    [ 224.341] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 224.341] (II) Loading sub module "ramdac"
    [ 224.341] (II) LoadModule: "ramdac"
    [ 224.341] (II) Module "ramdac" already built-in
    [ 224.341] (==) Depth 24 pixmap format is 32 bpp
    [ 224.341] (II) RADEON(G0): [DRI2] Setup complete
    [ 224.341] (II) RADEON(G0): [DRI2] DRI driver: r600
    [ 224.341] (II) RADEON(G0): [DRI2] VDPAU driver: r600
    [ 224.342] (II) RADEON(G0): Front buffer size: 3072K
    [ 224.342] (II) RADEON(G0): VRAM usage limit set to 465004K
    [ 224.350] (==) RADEON(G0): Backing store enabled
    [ 224.350] (II) RADEON(G0): Direct rendering enabled
    [ 224.350] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 224.350] (II) EXA(256): Driver registered support for the following operations:
    [ 224.350] (II) Solid
    [ 224.350] (II) Copy
    [ 224.350] (II) Composite (RENDER acceleration)
    [ 224.350] (II) UploadToScreen
    [ 224.350] (II) DownloadFromScreen
    [ 224.350] (II) RADEON(G0): Acceleration enabled
    [ 224.350] (==) RADEON(G0): DPMS enabled
    [ 224.350] (==) RADEON(G0): Silken mouse enabled
    [ 224.351] (II) RADEON(G0): Set up textured video
    [ 224.351] (II) RADEON(G0): [XvMC] Associated with Radeon Textured Video.
    [ 224.351] (II) RADEON(G0): [XvMC] Extension initialized.
    [ 224.351] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 224.369] (II) intel(0): SNA initialized with Ironlake (gen5) backend
    [ 224.369] (==) intel(0): Backing store enabled
    [ 224.369] (==) intel(0): Silken mouse enabled
    [ 224.369] (II) intel(0): HW Cursor enabled
    [ 224.369] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 224.369] (==) intel(0): DPMS enabled
    [ 224.369] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 224.369] (II) intel(0): [DRI2] Setup complete
    [ 224.369] (II) intel(0): [DRI2] DRI driver: i965
    [ 224.369] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 224.369] (II) intel(0): direct rendering: DRI2 Enabled
    [ 224.369] (==) intel(0): hotplug detection: "enabled"
    [ 224.369] (--) RandR disabled
    [ 224.493] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 224.493] (II) AIGLX: enabled GLX_ARB_create_context
    [ 224.493] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 224.493] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 224.493] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 224.493] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 224.493] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 224.493] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 224.493] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 224.493] (II) AIGLX: Loaded and initialized i965
    [ 224.493] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 224.906] (II) intel(0): switch to mode [email protected] on LVDS2 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 231.373] (II) intel(0): Setting screen physical size to 361 x 203
    [ 231.680] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 231.680] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 231.680] (II) LoadModule: "evdev"
    [ 231.680] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 231.703] (II) Module evdev: vendor="X.Org Foundation"
    [ 231.703] compiled for 1.15.1, module version = 2.9.0
    [ 231.703] Module class: X.Org XInput Driver
    [ 231.703] ABI class: X.Org XInput driver, version 20.0
    [ 231.703] (II) Using input driver 'evdev' for 'Power Button'
    [ 231.703] (**) Power Button: always reports core events
    [ 231.703] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 231.703] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 231.703] (--) evdev: Power Button: Found keys
    [ 231.703] (II) evdev: Power Button: Configuring as keyboard
    [ 231.703] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 231.703] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 231.703] (**) Option "xkb_rules" "evdev"
    [ 231.703] (**) Option "xkb_model" "pc104"
    [ 231.703] (**) Option "xkb_layout" "us"
    [ 231.740] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 231.740] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 231.740] (II) Using input driver 'evdev' for 'Video Bus'
    [ 231.740] (**) Video Bus: always reports core events
    [ 231.740] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 231.740] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 231.740] (--) evdev: Video Bus: Found keys
    [ 231.740] (II) evdev: Video Bus: Configuring as keyboard
    [ 231.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event14"
    [ 231.741] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 231.741] (**) Option "xkb_rules" "evdev"
    [ 231.741] (**) Option "xkb_model" "pc104"
    [ 231.741] (**) Option "xkb_layout" "us"
    [ 231.742] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 231.742] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 231.742] (II) Using input driver 'evdev' for 'Video Bus'
    [ 231.742] (**) Video Bus: always reports core events
    [ 231.742] (**) evdev: Video Bus: Device: "/dev/input/event13"
    [ 231.742] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 231.742] (--) evdev: Video Bus: Found keys
    [ 231.742] (II) evdev: Video Bus: Configuring as keyboard
    [ 231.742] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14/event13"
    [ 231.742] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 231.742] (**) Option "xkb_rules" "evdev"
    [ 231.742] (**) Option "xkb_model" "pc104"
    [ 231.742] (**) Option "xkb_layout" "us"
    [ 231.743] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 231.743] (II) No input driver specified, ignoring this device.
    [ 231.743] (II) This device may have been added with another device file.
    [ 231.743] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 231.743] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 231.743] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 231.743] (**) Sleep Button: always reports core events
    [ 231.743] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 231.743] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 231.743] (--) evdev: Sleep Button: Found keys
    [ 231.743] (II) evdev: Sleep Button: Configuring as keyboard
    [ 231.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
    [ 231.743] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 231.743] (**) Option "xkb_rules" "evdev"
    [ 231.743] (**) Option "xkb_model" "pc104"
    [ 231.743] (**) Option "xkb_layout" "us"
    [ 231.744] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 231.744] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)
    [ 231.744] (II) No input driver specified, ignoring this device.
    [ 231.744] (II) This device may have been added with another device file.
    [ 231.744] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 231.744] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
    [ 231.744] (II) No input driver specified, ignoring this device.
    [ 231.744] (II) This device may have been added with another device file.
    [ 231.745] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
    [ 231.745] (II) No input driver specified, ignoring this device.
    [ 231.745] (II) This device may have been added with another device file.
    [ 231.745] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event10)
    [ 231.745] (II) No input driver specified, ignoring this device.
    [ 231.745] (II) This device may have been added with another device file.
    [ 231.745] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event5)
    [ 231.745] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
    [ 231.745] (II) Using input driver 'evdev' for '1.3M WebCam'
    [ 231.745] (**) 1.3M WebCam: always reports core events
    [ 231.745] (**) evdev: 1.3M WebCam: Device: "/dev/input/event5"
    [ 231.745] (--) evdev: 1.3M WebCam: Vendor 0x4f2 Product 0xb1d8
    [ 231.745] (--) evdev: 1.3M WebCam: Found keys
    [ 231.745] (II) evdev: 1.3M WebCam: Configuring as keyboard
    [ 231.745] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7/event5"
    [ 231.745] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 10)
    [ 231.745] (**) Option "xkb_rules" "evdev"
    [ 231.745] (**) Option "xkb_model" "pc104"
    [ 231.745] (**) Option "xkb_layout" "us"
    [ 231.746] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 231.746] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 231.746] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 231.746] (**) AT Translated Set 2 keyboard: always reports core events
    [ 231.746] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 231.746] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 231.746] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 231.746] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 231.746] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 231.746] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 231.746] (**) Option "xkb_rules" "evdev"
    [ 231.746] (**) Option "xkb_model" "pc104"
    [ 231.746] (**) Option "xkb_layout" "us"
    [ 231.746] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
    [ 231.746] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 231.746] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 231.746] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 231.746] (II) LoadModule: "synaptics"
    [ 231.746] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 231.754] (II) Module synaptics: vendor="X.Org Foundation"
    [ 231.754] compiled for 1.15.1, module version = 1.8.0
    [ 231.754] Module class: X.Org XInput Driver
    [ 231.754] ABI class: X.Org XInput driver, version 20.0
    [ 231.754] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 231.754] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 231.754] (**) Option "Device" "/dev/input/event12"
    [ 231.930] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 231.930] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5822 (res 79)
    [ 231.930] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4766 (res 141)
    [ 231.930] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 231.930] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 231.930] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 231.930] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 231.930] (**) Option "TapButton1" "1"
    [ 231.930] (**) Option "TapButton2" "2"
    [ 231.930] (**) Option "TapButton3" "3"
    [ 231.930] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 231.930] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 232.010] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event12"
    [ 232.010] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 232.010] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 232.010] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 232.010] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
    [ 232.010] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 232.010] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 232.010] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 232.010] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 232.010] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 232.010] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 232.010] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 232.011] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 232.011] (II) No input driver specified, ignoring this device.
    [ 232.011] (II) This device may have been added with another device file.
    [ 232.011] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
    [ 232.011] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 232.011] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
    [ 232.011] (**) Acer WMI hotkeys: always reports core events
    [ 232.011] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
    [ 232.012] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
    [ 232.012] (--) evdev: Acer WMI hotkeys: Found keys
    [ 232.012] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
    [ 232.012] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event6"
    [ 232.012] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
    [ 232.012] (**) Option "xkb_rules" "evdev"
    [ 232.012] (**) Option "xkb_model" "pc104"
    [ 232.012] (**) Option "xkb_layout" "us"
    [ 232.013] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
    [ 232.013] (II) No input driver specified, ignoring this device.
    [ 232.013] (II) This device may have been added with another device file.
    [ 232.013] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
    [ 232.013] (II) No input driver specified, ignoring this device.
    [ 232.013] (II) This device may have been added with another device file.
    [ 239.383] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 240.099] (II) evdev: Acer WMI hotkeys: Close
    [ 240.099] (II) UnloadModule: "evdev"
    [ 240.099] (II) UnloadModule: "synaptics"
    [ 240.099] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 240.099] (II) UnloadModule: "evdev"
    [ 240.099] (II) evdev: 1.3M WebCam: Close
    [ 240.099] (II) UnloadModule: "evdev"
    [ 240.099] (II) evdev: Sleep Button: Close
    [ 240.099] (II) UnloadModule: "evdev"
    [ 240.099] (II) evdev: Video Bus: Close
    [ 240.099] (II) UnloadModule: "evdev"
    [ 240.099] (II) evdev: Video Bus: Close
    [ 240.099] (II) UnloadModule: "evdev"
    [ 240.099] (II) evdev: Power Button: Close
    [ 240.099] (II) UnloadModule: "evdev"
    [ 240.101] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
    [ 240.101] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
    [ 240.101] (EE)
    Fatal server error:
    [ 240.102] (EE) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
    [ 240.102] (EE)
    [ 240.102] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 240.102] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 240.102] (EE)
    [ 240.102] (EE)
    [ 240.102] (EE) Backtrace:
    [ 240.102] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x584b08]
    [ 240.102] (EE) 1: /usr/bin/X (0x400000+0x1887f9) [0x5887f9]
    [ 240.102] (EE) 2: /usr/lib/libpthread.so.0 (0x7f82116cb000+0xf4b0) [0x7f82116da4b0]
    [ 240.102] (EE)
    [ 240.102] (EE) Segmentation fault at address 0x0
    [ 240.102] (EE)
    FatalError re-entered, aborting
    [ 240.102] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 240.102] (EE)
    EDIT2:
    I downgraded to 3.12. Now everything works like a charm, but I wouldn't call downgrading a fix. I am still open for suggestions.
    Last edited by Hylleman (2014-06-12 12:16:40)

    beneix wrote:
    but it just doesn't feel like doing it the way I want...
    You should go into the "Display" settings in the Win 7 control panel and have a thorough look through all the settings available there!
    Cheers,
    Bill
    I don't work for Lenovo

  • I plugged my iphone into itunes on a new computer nothing happened and now even when i unplug it, its just a black screen with itunes icon and a usb...someone please help?

    We got a new computer so i plugged my Iphone4 in, nothing happened so i unplugged it now its just a black screen with the itunes icon & Usb and i cant turn it off or get on anything?
    PLEASE HELP!

    Plug in your phone and launch iTunes on the computer. Then in the sidebar look for something about an iPhone. Click it and set up your iPhone. Has this iPhone ever been synced with another computer?

  • Black Screen after I shut and open the lid

    Recently I updated the driver of my graphics card. Earlier it was showing my graphics to be AMD HD 6490M series but after update it shows graphics to be AMD Radeon HD 7400M Series. And I did theupdate from official AMD website.
    Everything works fine except that when I close the lid so as to send the laptop to sleep and then, when I re-open the lid I get a black screen and only way to get rid of it is to force close the laptop using the power key.
    Once I faced the problem I reverted back to the graphics driver that is provided in HP support site. In the original driver this problem is solved but I face another problem. After switching on the laptop and working for about 5-10 minutes I get an error message stating - "Catalyst Control Center has stopped working".
    Kindly someone help me. And please don't suggest me to do factory reset. 
    Its very difficult to reinstall all the sftwares that I have.

    @A_Dash ,
    Hello and thank you for posting on the HP support forums.
    Did you go an physically change the graphics card on your notebook?
    If not do a system restore and roll back to the previous driver.
    Using Microsoft System Restore (Windows 7)
    If this fails to resolve the issue you will want to do a full system recovery back to the original configuration.
    The drivers on the system are normally proprietary so if you are upgrading from the AMD website or other source you will find issues.
    Thanks again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Black Screen HP G62-b16st and ati radeon 5470 hd

    Hi, I have a problem with my laptop (Hp g62 - b16st) I am using this laptop since 2011 and i didnt have any complain so far but 3 days ago when i was playing PES 2013 it suddenly restarted itself and then blue screen showed up. I did research on google about this problem and i didnt see any helpful solution. My problem is about Ati Radeon Hd 5470. When i switch to Ati Radeon i just see black screen and if i dont deactive it in safety mode it keep showing black screen. I tried everything to fix it but nothing  happened.  I hope you can help me because i couldnt find the solution by myself.
    Bios Version : F48
    Win7 Home Basic x64 bit
    This question was solved.
    View Solution.

    Hi uAunknown, welcome to the HP Forums. Hopefully the blue screen and black screen behavior you are experiencing is driver related, and not hardware related.  First restore the original graphics drivers (Intel & AMD) using this method:  Using Recovery Manager to Restore Software and Drivers (Windows 7)
    Then download, and install the updated drivers here: 
    Intel High-Definition (HD) Graphics Driver
    AMD High-Definition Graphics Driver
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • Problems with a AS3 SWF

    Hello, I am having issues with a SWF file posting properly in a Catalyst project.  I have already put a post in the Catalyst section but I wanted to bounce the idea off this room that the issue is more SWF and less Catalyst because everything else in

  • Flex 2 14 periodically disconnects from the network on Wi-Fi.

    My brand new Flex 2 14 periodically disconnects from the network on Wi-Fi.  This is pretty unacceptable.  Other PC's in the house are not experiencing the problem, so it's difficult to blame the router.,  I have a Broadcom 802.11N Network Adapter dev

  • Subscriptions are minute based !! 2secounds call =...

    I want to ask why Subscription based calls are minute based ! If i buy 200 minute i have to use 200 minute !! For example if i used 10 secounds mine subscription have to be like 199minutes 50secounds !! But in real it is not like that . Skype countin

  • P67A-GD53 can't use BIOS interface!

    This is what I'm looking at when I get into the BIOS: There is no interface that I can actually see and use. The monitor scaling is fine outside the BIOS.

  • Parts of page missing, format of page changed and unsuable

    In yahoo mail, the line that has the delete, move, etc. selections has disappeared. In facebook the page format has changed and is unusable. Other pages will not load or load correctly. I removed firefox from my computer and reinstalled. It is still