BlackBerry Cruve 9380 corrupt/damaged invisible images/folders?

I have a Curve 9380 and in September of last year i went to 2 concerts the day after one another and used my BlackBerry as my camera for both nights. On the first night I took 46 images and on the second night I took 106 images. A few weeks after the shows I decided to place the images into seperate folders on my phone so I could access them easier and also so I could know which photos were from which concert easier.
All was fine up until around mid-december when iI turned my phone on one day and both folders of images had completely dissappeared, the folders were not there, the images were not there and the images had not gone back into my camera folder either. I have tried every solution I have seen online and nothing had worked.
However, about a month later, the folders of images re-appeared on my device with the correct names and correct number of files in each folder. However, the image files are there but are not visible; when i open each folder I can see just blank thumbnails with smaller default image thumbnails in the middle (the usual Green hills. blue sky and sunshine cartoon like images). The number of files are all correct in each folder but each image has exactly the same thumbnail and when i press on each thumbnail to view the photo in full, it just shows me a blank, black photo with a small black and white thumbnail (same as described previously but in black and white) in the middle of the screen.
I have the same problem with every file in each of the 2 folders, I have tried formatting the card before the 2 folders re-appeared and nothing happened and I have also tried accessing the images and folders through plugging my device and card into a computer and that hasn't worked either.
So at this moment in time I have 2 folders with the correct amount of image files in each but no way of actually accessing and viewing them, these photos are really important to me and I would love to know if there is a way of getting them back in full.

Similar Messages

  • My Blackberry Curve 9380's screen won't turn on!

    My Blackberry Curve 9380's display screen won't turn on!  The flashing red light still appears so I guess I am still able to receive texts.  I can also receive calls; my ring tone goes off but I cannot answer!  I have to unlock it and I can't do anything on a touch screen that's virtually useless now.  I've done so many battery pulls yet it doesn't work.
    I did drop it but it wasn't very hard.  My bb fell when it was in my rubber case and the fall was around knee length (I am very short only 5'0).  My friend said its possible that the backlight broke.  If it is true, how much does it cost to repair it?  My warranty expired a few weeks ago...
    My friend also said there could be something else wrong with it.  Like a downloaded an app that had a corrupt file (this has happened to me before and the phrase "Uncaught exception java.lang.error" kept popping up every time I did a battery pull) or a programming error. I tried Jl_Cmder and I've done reset to factory.  I've even tried to wipe everything completely.  "The device will reboot to a white screen with a '507' error" this didn't happen... It did reboot but nothing can be seen.  I regret it deeply ...
    I'm sorry this is so long but please can someone help me? ): 

    Ouch, that doesn't sound good. Even though it's out of warranty, you should check first with your mobile provider for a repair estimate. 
    Sorry!
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My blackberry curve 9380 becomes worst device of my life

    I have purchased blackberry curve 9380 around two month back. it worked good  2-3 weeks but thereafter phone start hanging then it took 5 minute to take single pick ,net speed goes down and battery backup almost nil. I contacted the laxmi nagar Delhi service center many time they updated the software but problem not resolved Customer representative said to me that phone is just for calling not for using application ,even I have just 3 to 5 application installed on it. 
    Now I would like to ask to blackberry team what is use of purchasing curve 9380 
    this phone not able to handle 3 application It becomes most worst phone of my life
    please provide some solution to my problem 

    Hi ritikapal
    Welcome to the Community
    Sorry to hear about your problem but As you also known that this is just a user support forum ,here user like you and us try to help each other as much possible.
    On your Home screen Go to Options > Device > Application Management > Move your Trackpad  left or right on the screen to CPU USAGE... check which application(s) is using the CPU resorces.
    Regarding your device problem if anybody told you that BlackBerry are meant  only for calling I think he has a little knowledge about BlackBerry.Your device can handle much more application but it depends on the way we use it.pressing the menu key for a few second  will pop up a screen which will show all running programs in the background ,generally five will always there ( Home, BBM, Message,Phone , Browser ) look if any other apps. are running.
            Always try to Close Applications Correctly - Avoid using the End key to close applications as this simply minimizes the application and leaves it running in the background. Instead, press the Menu key, select the Close or Exit option to exit the application.If programs run in the background it will also lead to Battery drainage and also device hangs .Please have a look at this Article  :
      KB14320 How to maximize battery life and free memory on the BlackBerry smartphone .
    Try following those steps mentioned at the KB to see if your problem resolves.
    If problem presists try it by youself :
    1.Locate your Carrier and Download the OS you desire from here and Install it in your PC or Laptop Carriers
    (make sure you are downloading for the same model as you have )
    2. Download and install the latest BlackBerry desktop software from here BlackBerry desktop software
        Then if it allow  perform your backup of your device.
    3.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml ( On your Pc change your folders option to show hidden files/folders ) :
        C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
        C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
      4. Use BBSAK from  http://bbsak.org/   and wipe the device then after you get the error 507 ( no OS ) then proceed to next step.
    5. Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (For 64-bit Vista or Windows 7, the path       will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe. 
    6. Follow this KB on how to Restore backup http://www.blackberry.com/btsc/KB10339
    Please try and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Switch b/w edge and GSM on Blackberry Curve 9380

    Hey few days back I bought Blackberry Curve 9380. Basically I'm new to Blackberry Universe.
    Generally when I'm at home, I prefer to use GSM only coz I have Wi-Fi. But when I swtich off data usage, connect to Wi-Fi, the Browser and other internet applications say that they are unable to internet. 
    Also guide me how to switch b/w GSM & edge network...
    Solved!
    Go to Solution.

    First Your need BIS - Blackberry Internet Serives subscription from Vodafone IN, this is the unique feature which seperates other mobile devices from Blackberry.
    Browser, Facebook,twitter and all other apps require BIS subscription. Only appworld will work in Wi-Fi mode.
    You can change the Browser settings to Hotspot to work in wifi, but i think in OS 7 it will detect automatically.
    if you have BIS subscription 3G is free.

  • Numbers in web gallery and resource image folders do not match

    When I create a web gallery in Bridge, the numbers in the resource image folders, (Large, medium, thumbnail) do not match the name and numbers in the gallery and are completely out of order. The numbers are long and random.  My client is trying to email the small files and cannot locate them easily.
    I have never had this problem before....can you help?
    Thanks!!!

    Thanks Think, I've tried that. The strange thing is when I
    open the page in Contribute, it shows the original image. When I
    click Edit page, the image I want on the page is on the page. Not
    sure what I've done. Pages were originally created in Microsoft
    2007 and uploaded to the web. I am using Contribute to edit, it
    seemed like it would be much easier to edit pages.

  • Flash Galleries generate multiple image folders

    Can anyone explain why the Flash templates need to generate 3 image folders (Large, Medium, Small) in addition to the Thumbs? I'm pushing my disk space limit on my hosting server, and wonder if I really need to upload all these, as the combined size of the Small and Medium folders exceeds that of the Large folder, and I don't know what purpose they serve (though of course I don't know how Flash works, at all)
    Any input appreciated
    Jim

    Bluefire developed the Adobe Media Gallery (i.e. the Flash gallery packaged with Lightroom) and have posted a lot of interesting information about it in their blog. Definitely worth reading up on if you plan to use it.

  • Lightroom 4.3 corrupts my RAW images stored on local SSD harddisk

    Using Lightroom 4.3 with Camera RAW 7.3 on latest MacBook Pro with 256 GB SSD harddisk, 8 GB internal memory bought 2 months ago. Hardware shows no other problems or malfunctioning, no issues with RAM or otherwise.
    Started Lightroom 4.3 did an import from perfect images (viewed before using various other software packages) stored on the harddisk. Used option ADD to add to the catalog. Almost immediately certain images were showing missing areas or areas with pink/white stripes, etc.
    I didn't even touch the images to view or edit them. The images were corrupted on disk as previewing them with other software packages showed.

    bruijnesteijn wrote:
    I appreciate all the help
    You're welcome, for my part .
    bruijnesteijn wrote:
    I am getting the feeling that a Lightroom user is expected to be know a lot of possible hardware and software stuff thn can be expected from the average photographer.
    Only if they're having problems .
    bruijnesteijn wrote:
    MacBook extended checks. No issues, unless we are going to question the Apple software used for checking their own hardware...
    I have no clue...
    bruijnesteijn wrote:
    I copy my images to my harddisk using Adobe Bridge Photo Downloader = check, images are OK in Camera RAW & Photoshop.
    If we're talking about the raw rendering, and not just the jpeg, then this means transfer hardware is OK.
    bruijnesteijn wrote:
    After this no other hardware is involved
    That is not so true. Hard disk, ram, cpu, ..., - all play a continuing role.
    bruijnesteijn wrote:
    No proprietary RAW format e.g. I use standard Canon 550D settings. Not sure how proprietary you call that and what I can do about that and why Lightroom would have a problem with it. If that would be an issue I would expect a lot more issues from other users.
    A proprietary raw file is any raw file that is not DNG. The distinction is important because:
    * Proprietary raws can not be corrupted by Lightroom (that statement has 99.999999999999% probability of being true, in the context discussed so far).
    * DNGs on the other hand, are, in some circumstances, completely re-written, and can, therefore, be corrupted on Lr's watch (due to hardware failure). Granted, if such failure does occur, Lr is able to give a fairly clear & unambiguous message, since it keeps check codes for raw data integrity assurance. Note: such protection assumes the image was good when initially converted to DNG, and went bad after-ward - which is not necessarily the case: thus a good reason to visually inspect all images after conversion to DNG.
    bruijnesteijn wrote:
    Software:
    No other software
    *iff* it is certain that raw image (raw-rendering, as distinguished from jpeg preview), was OK, before accessing via Lightroom, the other software is a non-factor.
    bruijnesteijn wrote:
    Calibration display:
    XRITE i1 display pro
    I am a bit confused why a calibration file would get off-balance after some time? You need to recalibrate the display once in while, but that's because the display is changing.
    I can understand Lightroom has problems with a corrupted profile, but how can it get corrupted as I would assume it is only read (not written) and why is Photoshop not having these issues?
    My focus is now on recalibration of display to rule out that item
    Not my area of expertise. However, in general, if you're having uncaught disk or hardware problems, or even software bugs, files can become corrupted - not just image files.
    PS - Did the Mac/HW test include the drive where photos are stored?
    Cheers,
    Rob

  • I accidently renamed image folders in bridge and cannot access the folder images.

    I accidently renamed image folders in bridge and can no longer access the folders. Is there a way to get the images back?

    On what Mac using what version of OS X?

  • My blackberry Curve 9380 won't switch on

    Hi, my blackberry curve 9380 won't switch on and i have had it on charge since last night.  The red light or green light isnt on and it doesnt want to switch on even after i take the battery, sim and SD card out? It is just under a year old.  Can anyone help because i need my phone to be on urgently!!!!

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My BlackBerry Curve 9380 is lost/stolen

    Please help me...
    How can I track my lost BlackBerry Curve 9380 by its pin? It has been stolen and I don't know what to do.
    Note:
    I don't have BlackBerry protect account and I think the thief through away my SIM card but am sure he must not be switched off the device.

    Hello,
    Please see this helpful thread:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/Lost-or-Stolen-BlackBerry-What...
    It is a pity you did not activate the FREE BB Protect app...it can be quite useful in your situation. But, like insurance, the time to prepare for this situation is BEFORE the need arises.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to sync different image folders from pc without removing images from ipad

    how to sync different image folders from pc without removing images from ipad as ipad asks to replace the already existing images in ipad with the pc folder.

    Spare yourself the frustration, use Photo Manager Pro.
    https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8

  • Problema blackberry curve 9380

    Hola a todos. 
    Se me bloqueó mi blackberry curve 9380 y mi problema es que conseguí el código para desbloquearlo pero no puedo ingresar  a la pantalla o menú de petición de código MEP2. Alguien me puede ayudar?

    Estimado Usuario, lamentablemente este foro es solo para el idioma Ingles, sin embargo lo podemos ayudar en el foro especializado en Español, esta es la dirección donde gustosamente lo podemos atender:
    http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es
    Muchas gracias
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Where does blackberry torch stores the current wallpaper image?

     Where does blackberry torch  stores the current wallpaper image?

    In Media > Pictures > Specific Folder Name as per Theme name.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Original Items and JPEG Images folders keep appearing on my desktop

    Hi, was hoping someone could help me.
    I keep getting empty "Original Items" and "JPEG Images" folders appearing on my desktop (MacBook Pro running Yosemite).
    It's been happening for a while now. Every time I try and delete them or move them off the desktop, fresh and empty folders reappear.
    I like to keep my desktop clutter free so it's an annoying problem.
    Any help on this would be greatly appreciated!
    Thanks.

    These are probably just files you have inadvertently downloaded from some web site, or perhaps a buggy JavaScript downloaded them to your desktop. You can find out where they were downloaded from by selecting them and choosing File -> Get Info. The More Info section will tell you. See the following example, taken from a file I downloaded not long ago:
    This is not the work of any kind of malware, and the "creepy" file is simply a Mandelbrot image, created from a mathematical equation. These can be quite beautiful. See:
    http://en.wikipedia.org/wiki/Mandelbrot_set

  • Desktop images/folders will not move OS 10.5.8

    Desktop images/folders are stuck in place. Can't be moved to the trash or anywhere for that matter.

    Partially explained...
    2Z691-6040-A  (OEM) Drop-in DVD...
    System Requirements
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 to 10.4.11 to install this 10.5 upgrade.
    Compatibility
    eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
    http://www.welovemacs.com/2z6916040a.html
    Not booting in Safe Mode is a serious problem.
    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Any errors? Any that cant be fixed?

Maybe you are looking for