Blackberry Desktop Software a Problem

I am pissed off trying to install Blackberry desktop Software on My PC. The CD that comes along with the Handset is a **bleep**, it doesnt work and my PC gets hang when i use it, although i tried to download Desktop software from Internet but then so the same is not getting installed. I am using Microsoft XP SP2 OS , But once the files are unzipped , it initiates windows installer and when we choose a language it closes down and dissapears.
I think Blackberry loses ground in terms of Softwares when it comared to close Rival Nokia, excellent supprot for software , where as i am fed up with Blackberry software support.
Zubin...

Hi and Welcome to the Community!
A little research and details might help your situation...for instance, see here:
http://us.blackberry.com/apps-software/desktop/sys​tem_requirements.jsp
If the version that came on that CD is 6.0.2 or later, then your system already does not meet the minimum requirements (XP SP3 is required). You'd need to use an older version unless you install SP3. Fortunately, RIM makes many different versions available for folks in exactly your circumstance:
https://swdownloads.blackberry.com/Downloads/entry​.do?code=A8BAA56554F96369AB93E4F3BB068C22
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Blackberry Desktop Software Installation Problem

    I had a problem with Roxio Media Manager continuously wanting to reinstall.  So I fixed that problem and and uninstalled the Blackberry software. I then tried to re-install the Blackberry Desktop software so I can syncronize my contacts on my home computer.  I have tried this from a downloaded version 4.6 and with the version on my Blackberry CD.  Same problem with both.
    The install starts and asks for language, then the install starts for a couple of seconds.  Then I get this message:
    Error opening installation log file.  Verify that the specified log file location exists and is writable.
    I can't get past this message.  It does not say where the log file location is.  Other software installs, it is only Blackberry software that will not install.  I tried renaming CProgram Files\Common files\Installshield and making it read/write, but this install still fails with the same message.
    Any ideas to try?  Anywhere else that I can go for help?
    Andy
    Solved!
    Go to Solution.

    Thanks, that worked.
    I unzipped the file, then I opened a cmd window and manually ran msiexec with your Blackberry msi file.  I added a /L flag to put the logfile into a local logfile.txt file and everything went fine.
    Perhaps you are specifying a problematic log file name, at least for my computer?
    Anyway, this new version of Blackberry software works fine for keeping my home contacts up-to-date with my work contacts.  I'm glad I was able to install it without the Roxio media manager.  That program was driving me crazy.
    Andy

  • Blackberry Desktop Software has encountered a problem and needs to close

    When I try to open Blackberry Desktop the message I get is that Blackberry Desktop Software has encountered a problem and needs to close.  I have a Blackberry Bold 9700 and as a result I cannot sync.  Does this mean I need to uninstall and reinstall?  If I reinstall will I lose the update that I have on my phone that has changed the interface?  Will I have to reinstall that as well?
    Thanks for any help or advice you can give me.

    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Also, for XP users, please be sure you are on SP3...that is the current minimum level required with the latest Desktop Software.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Desktop Software has stopped working. A problem has caused the program to stop...

    I have a Tour 9630 and just installed v6.0 and receiving an error window "Blackberry Desktop Software has stopped working. A problem as caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."  I have not received any message from Windows after 2 days.  Has anyone experienced this problem?  If so, I would appreciate any guidance.  I have Windows 7, if that matters. Thank you. in advance.

    Hi somewhatstock
    How far did you get with them? Did they have any ideas what might be causing the problem? Trying to work on it myself, so trying to eliminate what others might have tried. Curious why it works on my Desktop however. Losing tethering really causes problems as I rely on tethering with my laptop quite a lot.  
    Any information most welcome,
    regards,
    John

  • Windows XP gives message "BlackBerry Desktop Software has encountered a problem and needs to close." when trying to start Desktop Manager

    I apologize if this issue has already been handled in others' posts; I just can't locate my specific issue, and I'm a newbie with this.
    I first encountered the Windows crash shown in subject yesterday when trying to sync my Blackberry. Message is displayed after the program churns for awhile, but hasn't even detected a remote device or shown that it is doing any work.
    I vaguely recall agreeing to an update a few days back.  Perhaps Windows has updated recently as well? 
    I have uninstalled and installed most recent Desktop version several times, rebooting in between.  I have tried installing original version as well - Desktop at least starts then, but bombs before syncing anything.  I also have rolled back my Windows system to before last Windows update.
    Here is the error message that I believe is associated with this problem:
    Sunday, December 26, 2010
    .NET Runtime 2.0 Error Reporting
    EventType clr20r3, P1 rim.desktop.exe, P2 6.0.1.18, P3 4cfdab9c, P4 microsoft.practices.composite, P5 2.0.1.0, P6 4c58abaf, P7 12b, P8 50, P9 sclhiaanmqhkf4zdfpvvwejkphn1z uj, P10 NIL.
    Thanks in advance for any help you can provide.

    Bold 9650 running on Windows XP
    I finally solved my problem with blackberry desktop manager 6.0.1 by going bck to 6.0 version and here is how I did it, since the 6.0 version is not available on blackberry's website or on a disk and I have spent over 30 hours with BB tech support all to no avail in fixing 6.0.1 and enabling it to open.
    1) Removed any Blackberry desktop software from my computer via the  add/remove program in the control panel.  No need to deal with a clean uninstall in terms of registry cleaner, etc.
    2) Installed 6.0 which i was lucky enough to have backed up the intallation files from several months ago when I backed up my entire system to an external drive. 
    3) Opened BB desktop mananager and connected my device and configured my sysn with outlook and all worked out. 
    If anyone needs BB Desktop Manager 6.0 to go back to a version that once worked for you, please let me know and I will email it to you via yousendit.com since it is a 95mb file.
    -Marty

  • Help! Blackberry Desktop Software has encountered a problem and needs to close

    I cannot get my Blackberry Desktop to open.  An immediate message is displayed" Blackberry Desktop Software has encountered a problem and needs to close." I have done the following:
    1.  Rebooted
    2. Uninstalled and reinstalled from the website
    3,  Uninstalled, gone in to the program files and removed everything I cou;ld find from Research in Motion and then reinstalled from the website and rebooted
    Nothing has worked.  My Blackberry Bold 9700 phone is still working just fine but I cannot back it up/
    I am not the most technilogically savvy but I'm not bad...Someone please help!.

    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Also, for XP users, please be sure you are on SP3...that is the current minimum level required with the latest Desktop Software.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Sync problem with Blackberry Desktop Software for Mac

    Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

    Can someone help. I have synchronization problem with my contact in the Outlook for Mac using blackberry desktop software for mac. Seems all details in my blackberry handheld contact got synchronized, but not email addresses (so all names, jobs, companies, work phone, mobile - all got synchronized, but not email addresses). All data is in my handheld. I wish I could just "replace" (not merge/sync) outlook contact with all contact in the handheld but seems there is no option to do that. Let me know please if someone has similar experience and has found out solution. Thanks!

  • Blackberry Desktop Software (Roxio, specifical​ly) causes network problems and blue screens.

    I'm posting this note because I just solved my network issue/crash problems. I started experiencing lots of disconnects and page not found on my office computer over the past few days. Only thing I could think of that was different lately was that I installed the Blackberry Desktop Software. Then a huge lightbulb went on over my head. I remembered when it was installing, it said it was installing "Roxio" software and at that moment shivers went down my spine from past experiences.
         Well, I have lots of good "bad" experiences with Roxio CD software which had caused these same problems on two of my home computers. It caused blue screens when used in conjunction with my wireless Netgear card and also standard network card. The same symptoms including very slow internet access, general machine sluggishness, etc. I was trying to chase this down for months til I finally removed the Roxio crapware and ALL problems went away. No more slow machine, no more page not found and no more blue screens on two of my computers. Now, on a completely different Toshiba work laptop and different network adaptor, same problems.
         So, here we are again with Roxio as part of Blackberry Desktop software. I like my new Blackberrry 8830, but I have to pass this along to the Blackberry folks because I KNOW I'M RIGHT about this. I only installed the software so that I could type my contacts into Outlook and then download to my Blackberry. So, after realizing the common symptoms and after having completed my download (which worked great by the way), I removed the Blackberry Desktop Software and I'm back to speedy everything, no more pages not found, no more putty disconnects, and no more blue screens.
         I hope someone gets good use of this post because this drove me crazy the first time around.
    -- Jeff

    We had the same problem.
    We did extensive troubleshooting, and found the problem was effecting our new HP Windows XP .Laptops.
    We did not have any trouble with the Older Dell Latitude we have.
    We found the BSOD still happened after removing the Black Berry Desktop Manager Software.
    We traced it to a memroy / resource leak in the USB subsystem.
    The workaround we found is to go into the Device manager, and remove all the drivers from the USB section.
    ** Disclaimer :  This works for us, but may make your computer unusable.  Backup your data to external storage.
                   Back up your computer
                   Start -> control Panel -> system ->Hardware tab ->  Device manager.
                    Expand "Universal Serial Bus Controller"  at bottom of list.
                    Right click on each Item, and select "uninstall"
                    Don't reboot after each one.
                    * Remove ALL the entries under Universal Serial Bus Controllers *
                    Repeat until all the entries under  "Universe Serial Bus Controller" are removed
                    (there may be one that sticks, thats ok. so long as it has been uninstalled.
                Reboot.
                The OS will rebuild the USB stack and drivers to default.
    This has worked for us so far.
    We are not sure if this wont break something else.

  • Problems loading applications using Blackberry Desktop software

    I am using a Blackberry Bold 9000 with OS 5.0.0.681 (Bundle 1137, Platform 5.2.064) and Desktop Software 6.0.0.40 (Bundle 42) on Windows XP. I have about 20 MB of memory available for apps, but I cannot load new applications using Blackberry Desktop software. Now I can remove or unload software with no problem. However, when I attempt to load applications or software that I don't have, the following happens: I can click on the grey cross icon under "Action" to indicate I want the module and status changes to "Pending Install". The apps I want are English UK, Spanish, Supplemental SureType Wordlists for English and Spanish, Blackberry Application Centre, DOD Root Certificates, TTY Support. I then see the following on on the screen: "Update - Uploading Device software -->" "Update - Loading applications -->" "Loading device modules -->" "Loading applications from device - Searching for available device software -->" "Loading applications from device - Read device service information -->" "Loading applications from device - Searching for available device software -->" And lo and behold - the applications are not loaded; they appear as uninstalled in the application list and I can't access them on my Blackberry. During this process the phone does not reboot... previously when changes were made the phone would reboot. My question is, is there a way to force Desktop Manager to load the applications? How can I load the software I want? I have done a wipe and reinstall of apps and OS on my phone; delete and registry clean of my laptop followed by reinstallation of Desktop Software; battery pull and SIM card pull, but to no avail. This is frustrating as I have friends with whom I converse with in Spanish but it isn't my first language so the spell checker is very useful. Any help would be appreciated.

    Same problem, after weeks of no problems.
    Hard reboot of 8520 several times, reboot desktop, tried different USB ports.
    Intellisync crashes on organizer sync and Destop Manager cannot read applications.
    Is there a fix?

  • Problems synchronization Blackberry desktop software version 6.0.0.40

    Today I installed the latest version of the Blackberry desktop software, 6.0.0.40 on my desktop, latest MS Vista version. After I connected my Blackberry bold 9000 via USB, the system automatically made a backup. That's fine ofcourse. But when I want to verify the synchronization parameters, the system gives an "unknown error" and don't allow me to change the parameters because of that error. I can't click one of the four given synchronization aps, the system doesn't allow it and comes with the error mentioned before. I checked for a newer version of the desktop software, but I have the latest version.
    Who can give me a good advice to solve this?
    Bernard, Holland, Europe.

    I have the same problem and am still waiting on a solution from RIM , and may end up switching form Blackberry because of it. I use win 7, latest DM6, BBerry Tour with latest Verizon updates, and Outlook 2010. I have un-installed and reinstalled DM6 multiple times, using every clean un-install protocol here. I STILL get "Intellysinc error" when I try to change the sync parameters as you've said, crashing DM6. I haven't been able to sync since at least May- it is ABSURD THAT RIM DOESTN CARE ABOUT BUSINESS USERS anymore, leaving us with outlook 2010 high and dry all these months. I will be switching to Droid in a week if RIM doesn't solve this !
    Gregory
    Gregory S Pokrywka MD, FACP
    Prevention of Cardiovascular Disease and Women’s Menopausal Health
    Assistant Professor of Medicine
    Johns Hopkins University School of Medicine
    Inaugural Diplomate American Board Clinical Lipidology
    Certified Menopause Practitioner: North American Menopause Society
    Director: Baltimore Lipid Center

  • Problem with Blackberry Desktop Software 4.3 Installation

    Hi - I downloaded the Blackberry Desktop Software 4.3.   The exec is called:  430_b025_english.exe
     When I run the exec I receive an error:  
     ERROR 1327.Invalid Drive E:\
    However I have no Drive E attached.  
    What should I do?  Please help and thank you in advance.

    Yes you would choose the bottom option (either blackberry internet service, or setting p a personal email account). You can still use the software to sync with an email clinet on your computer.
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Blackberry Desktop Software V6.0.2

    I just recently joined the RIM Blackberry family. I've installed the latest version of the Blackberry Desktop software, but am having trouble loading the program.
    I get a Windows error report...
    "BlackBerry Desktop Software has encountered a problem and needs to close. We are sorry for the inconvenience."
    Does anyone know what issues the program could be having? I've downloaded the program multiple times, re-installed, repaired, and tried to contact Blackberry. I'm incredibly frustrated. Anyone else having this issue, and possibly knows how to fix this?

    OK I FIND SOLUTION FROM FIRST TIME. I was in January already registered under nick name HONGKONG
    and here is solution what work first time. But now after DMupdate again DONT WORK.
    I had all the same problems as everyone else on this thread, but it was just as simple as renaming Rim.Desktop.Services.PolicyManager.dll to Rim.Desktop.Services.PolicyManager.dll.old and then back to Rim.Desktop.Services.PolicyManager.dll it worked.
    The file is located in:
    C:\Program Files\Research In Motion\BlackBerry Desktop\Modules\
    I can only say RIM, I never buy again BB units. Bye [keep it courteous please].

  • Unable to load Blackberry Desktop software windows 7 64-bit

    I am currently running Windows 7 64-bit SP1. I have tried to installed Blackberry Desktop software using 710_b042_multilanguage.exe from your site.
    Software appears to install without any problem. When I try to start up the software the blackberry splash screen appears without any issue. However after a short while a transparant window appears with Blackberry Desktop Software  on the title bar. I have Java 7.45.
    Any ideas why it doesnt appear to be loading correctly?

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

    I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
    Issues 1) playbook wont connect to desktop manager anymore 
    2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account. 
    3) my Phone when connected to desk top software shows the calendar as read only
    4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies." 
    I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!! 
    someone please help me. !! 
    I know you are going to ask I have updated everything last time and it is all as update as it can get. 
    As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts 

    Did you try to eboot the your PC or laptop where your device is connected ?
    I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

  • Blackberry Desktop Software crashes on startup

    I am running Windows XP on an Intel-based Mac through Boot Camp.  I have only recently had this issue and cannot resolve it.  I have Blackberry Desktop Software installed on my Mac as well and it runs fine, but I also need it for the Windows side because my company runs Lotus Notes and they subscribe to Blackberry Enterprise Server, so I need to routinely sync my phone with my Lotus Notes Contacts and calendar.
    Here is what I receive:
    "Blackberry Desktop Software has encountered a problem and needs to close."
    Error signature
    Event type: clr20r3
    P1: rim.desktop.exe
    P2: 6.0.1.18
    P3: 4cfdab9c
    P4: microsoft.practices.composite
    P5: 2.0.1.0
    P6: 4cfdaa3a
    P7: 12b
    P8: 50 
    P9: sclhiaanmqhkf4zdfpvvwekjphnm1zuj
    The actually "error report contents" are very long.  The strange thin g is that under "error report contants" it shows the "system info" as Windows NT build 5.1, very strange

    Same situation, same problem. ?? I only tried to use my Parallels windows instal becaue my mac version desktop software refused to delete applications or update. What is up with Blackberry and macs?

Maybe you are looking for

  • How to fix icon View in finder

    How do I snap the Icons to a grid? Also, is there a way to sort by Date Modified, Name, File Type, etc. when I'm in Icon view??? I know you can do it in the list view. Is there a way to make the icons bigger? Here is the current situation:

  • Deleting Duplicates from a table

    Its a huge table with 52 fields and 30k rows. I need to delete the duplicates based on one of the fields. GROUP BY is taking a lot of time. Is there a quicker way to delete the duplicates using SQL. Thanks.

  • Issues using the outline load command on Planning Version 11.1.2

    Hi All I am trying to add members into the Account dimension using the outline load utility within Planning version 11.1.2 and I am getting the following error message: Unable to obtain dimension information and/or perform a data load: Unable to crea

  • Access Restrictions bug of firmware 1.01.1 for WRT54G V5 V6

    I am using WRT54G V5. The Access Restrictions function won't work properly when using firmwares 1.01.1 and 1.01.0. Ports can't be blocked by using the "Blocked Services" in this function. Now I have to switch back to 1.00.9 to make the port blocking

  • Help to optimize my code and reduce 50% processing on my core i7

    This is my first time working with labview and I am trying to learn more. I have read free online guides etc and came up with my setup.   Goal: If I have a square signal coming then 1 square or beginning of the square will equal one change. I need to