'Blank' and 'Tooltip' Composition Widget disappearing

I have created a slideshow of sorts using the 'blank' composition widget (also tried 'tooltip comp'). I chose to use this so that I can add interactivity eventually and link text. Everything is working fine, until I start scrolling down the page. Once the composition is about half-way underneath my top menu, it completely disappears and no slides are visible. I've checked my scrolling/opacity settings and cannot for the life of me figure out what is triggering this. Any and all help would be greatly appreciated! The composition I'm referring to is the first one that appears on the page, just as the top menu drops down and contains a slide that says 'connect'.
http://www.matthewwilledesign.com
Thanks in advance!
-Matt

Place the trigger where it should be and rearrange the sequence of the triggers by changing their stacking order: Rightclick the trigger and choose "Arrange/…". The most backward trigger is the first one to open.

Similar Messages

  • Can I add a new trigger to the beginning instead of at the end of a blank composition widget?

    Hi guys,
    I am creating a photo gallery page using the Blank Composition widget. I want to be able to add new content regularly by adding new photos to the top (beginning) of the gallery so my newest photos show at the beggining of the gallery.
    Currently, the little + symbol to add another trigger only adds a new trigger to the right (bottom) of group of triggers, effectively putting newly added content to the back of the gallery instead of at the front. Am I able to get it to add a new trigger to the beginning of the group and have that trigger be the first in the group to display?
    All the widget's seem to display this same order behaviour, so I'm quite stuck on how to get around this. I've tried re-arranging the triggers, but that has become insanely cumbersome every time I want to add new photos to the beginning of the group and move the older ones further down the gallery order.
    Any help would be greatly appreciated with this, cheers, David.

    OK
    I'm a newbie.
    I have the same problem. I've looked at some recommended 3rd party widgets and they don't do what I want either.
    Another method would be to start a nabble.com blog and embed that in to Muse, but then the news would not be seen by web crawlers and benefit your ranking on your own page. (I think)
    This is a rubbish work around but, I'm going to add a new news widget every month. I only get 5-6 bits of news a month, so by adding a new widget above the last each time, that will push the old news down the page.
    Hope this helps someone.
    Jay

  • Using the Blank Composition Widget

    Hey guys,
    I'd like to know if it's possible (and how) to configure the Blank Composition Widget to show only the new blog posts, let's say five that would update automatically as I would add more to the BC Blog, without the need to go into Muse and constant updating.
    Thank U so much.
    The one who answers this will be a lifesafer

    Hi im8,
    You can refer to the following link for a jam session, its on integrating a blog from BC. http://tv.adobe.com/watch/muse-feature-tour/muse-advanced-cms-integration/
    Regards,
    Rajan

  • I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

    I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

    Thanx for the prompt response, KT. I have indeed seen that thread, only just after I posted the question.
    I have spent hours on the phone with what I now know is a call center in Texas on this question.
    I think Apple could be a little more "hands on" with iBooks Author users, and it should also be pointed out that landscape photos will not display in portrait mode.
    In my case, I used gallery widgets to display vertical photos, since they look better in portrait mode.
    But instead of simply rotating, the page disappears and a TOC of interactive media appears. The gallery behaves as expected when tapped. This is not what I expected, but since the gallery works, I can live with it.
    Right now I have "tickets" telling me to "fix" this "problem or to disable portrait mode.
    I don't want to disable portrait mode.
    Will Apple accept the books if I tell them this is not an "error?"

  • Slideshow Widget and Composition Widget Synchronizing Problem

    I have a slideshow with images and composition widget of text that corresponds with each slide. The settings are the same for both, works fine on desktop yet on the tablet and iphone versions, they are messed up.
    Here's the BC site: dezinegirl
    I have been waiting for Customer Care via Chat to figure it out looking at my files, but it's been an HOUR and I don't think he knows.
    Anyone else have this issue?
    BTW: I am working with a purchased template.
    Thanks!

    Hi Pam,
    Instead of using the slideshow widget in sync with the composition widget, I will suggest that you switch to using one composition widget. Slideshow widgets does not allow text frame but composition widgets allows images as well as text frames. So you can allocate individual text frames to each target and that should give you the effect that you are looking for with no sync issues.
    Let me know if you need more clarifications on this.
    - Abhishek Maurya

  • I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears.   I have tried connecting the iP

    I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears.   I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac).   What else can I do?

    You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
    If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
    I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
    Snow Leopard can still be purchased in the U.S. Apple Online Store.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

  • My messages on OS mountain lion are apperaring all blank and its not allowing me to send any Imessages, it will let me type it and as soon as i hit enter it disappears somewhere. I have updated my software and this hasn't helped! Thanks

    My messages on OS mountain lion are apperaring all blank and its not allowing me to send any Imessages, it will let me type it and as soon as i hit enter it disappears somewhere. I have updated my software and this hasn't helped! Thanks

    what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke.  Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that.  Your Mac Pro won't quit working if it isn't installed. From what  I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
    which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
    John B

  • When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    Did you reset your iPad like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.

  • Disappearing context menus and tooltips

    Hi.
    After updating to firefox 10 i got very annoying behavior where all context menu, selection lists and tooltips are appearing for very short moment and then disappear right away. When moving mouse over the invisible menu the menu is flickering, sometimes stays visible for a while.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Muse Crashes After Editing Composition Widget and Trying to Preview

    I'm working on a site that has a Composition widget (used as a slideshow, stacked options). To duplicate some content I go to one trigger container, Copy a graphic, select the next trigger then Paste In Place. After doing a few of these I try to Preview (sometimes in Muse, sometimes in Browser) but Muse invariable crashes with the message "DBCW/assertTheDataBaseFileIsUnchange- Database file has been modified externally".
    I tried saving the site first, then Previewing, but Must still crashes with the same message.
    Right now I need to shut Muse down before Previewing my work, not the greatest workflow.
    This is Release v 7.2, Build 232, Build 779928.
    Thanks for any HELP!

    Yup, that was it. The site muse file was on an NAS; I moved it to my local drive and the problem went away. Inconvenient to be sure, but at least I can work. I'm going to try to put the site muse file on an external USB drive, maybe I can make it portable that way.
    Thanks for the response.

  • Adding alt text to composition widget images?

    How do I add alt text and image titles for Composition>Blank widgets images? When I control-click the image, the context menu does not include these options.

    I'm not sure how to describe the problem I'm having, so here's a screen shot of my composition widget with images placed (it's a bit sloppy, but I'm running out of patience for fine-tuning until I get this situation figured out).
    After file>placing a thumbnail image in a trigger, I file>placed the corresponding image in its target area. I then clicked on the second trigger, placed the thumbnail. But the second trigger didn't click through to the second target panel, which would have been a grey panel. So I thought I maybe I should just go ahead and place the second target image anyway, but it just sits there on top.  I did this for three images. The first target image placed is on the bottom, then the second, and the third placed target image is on top. So I can't figure out how to click from one target panel to the next to place each image, getting it to correspond with its proper trigger. Does this make any sense yet?
    You can see how they look like they are separate and layered, and when sizing, or moved in any way, they are become ungrouped, rather than as a group such as when I used the fill option. Last, when I click on the trigger thumbnail images, the triggers just aren't activating the target panels at all. I'm at a complete loss on this. I think I've tried everthing, but obviously I'm missing something. Thanks again.

  • Overlay multiple composition widgets

    Is there a way to overlay multiple composition widgets?  I am overlaying 2 blank widgets and within Muse it works but when I preview the webpage it doesn't work.  For example, the trim of the shirt can be changed to red, while the main shirt can be changed to blue. In design mode, I have overlayed a blank widget with a blank widget.  Widget A has the main shirt images in 3 different colors, while widget be has the trim in 3 different colors.  Is this possible?
    James

    Hi Jawad,
    Just realised that you posed this in the Machine Vision section so you're using IMAQ.
    When you look at the example below, you'll see this is just using two images.
    https://decibel.ni.com/content/docs/DOC-25452
    Inside the For Loops, the colours of each image array is being change on every iteration, then the two image arrays are combined into one.
    You should be able to edit this code by simply indexing another image array into the for loop, building this (along with the two other image arrays) into the final array.
    Good luck!
    Josh E
    Applications Engineer
    National Instruments UK & Ireland

  • How can I change the order of thumbnails so it affects the order in the lightbox when using the composition widget - lightbox display?

    Hi, I'm making my portfolio in Muse, and I'm using the composition widget - lightbox display. I imported all the images and then I wanted to reorganize the thumbnails - and when I do that, the order in the lightbox doesn't change and so it's not the same as the order of the thumbnails (after rearranging them). Please let me know if there is a way to fix this quickly, or do I have to do it all one more time

    The order the items display in a composition widget is the front to back order of the items. You can rearrange the stacking order of the thumbnails/triggers using the Layers panel and/or the Object > Bring To Front, Send To Back, etc. menu items to adjust the order they're displayed during auto play or when clicking the next/previous buttons.

  • Why can't I reduce the height of my container box in the Lightbox Display composition widget?

    I'm using the Lightbox Display composition widget, I would like to place my trigger at the bottom of my lightbox, I've reduced the height of my image frame but the container box cannot be reduced accordingly. I need to reduce the height of the container box or my triggers will be hidden behind the box. Please advice, thank you.

    Hi,
    When you insert the light box display, by default it has 3 slides with different components like trigger, container, target, image frame, text box, next button, preview button. You have to change the dimensions for all components for these default 3 images one by one.
    Or you can delete 2 of the triggers (that will resul in deleting all of their components from the widget), then you are left with only one image and its components. Later, you can add more images to lightbox display.
    Resize the components as per following video:
    http://gauravr183.businesscatalyst.com/images/2013-09-26_1440.swf
    The steps are, after you have added the widget on the page:
    Delete the triggers.
    Then select Image frame, resize it. Move close button near it (the 'X' button), resize the text box,resize next and previous buttons and move all of these near the image frame.
    Then click on the image frame, till you get "Target" area selected, resize target area and container will be resized automatically.
    Regards,
    Gaurav Aggarwal

  • My composition widget is not working after the November Update

    Since i republished said site, my composition widget doesn't change when targets are hovered over, containers are not matched up with the right targets and the text is missing off the targets on a couple as well.
    http://www.stuttgartcountryclub.com
    All looks fine in Design view.
    Help please!

    I had to move it so site visitors wouldn’t see it…
    http://www.stuttgartcountryclub.com/old-items.html
    It appears to be working now…
    Nicki Case
    Marketing, Derden Inc.
    NCASE | DESIGN & CREATIVE
    870.672.1845

Maybe you are looking for