Blank in depreciation area tab in asset master record

Hi,
While creating the asset master record, by mistake have ticked the deactivation check box in Depreciation Area tab of Asset master through transaction code AS01.
Later when I displayed the asset master record through transaction code AS03, I found that depreciation area tab is full of blank (No information).
Please help how to bring back that screen. (I have tried all screen layouts, but could not success)
Regards,
Babjee

Hi Ramesh,
Thanks for response.
Mentioned clearly that Depreciation tab is completely BLANK. How could I go and activate the check box when I am not able to see anything in that tab.
Please advise.
Regards,
Babjee

Similar Messages

Enabling of the Business Area field in Asset Master Record

Hello SAP Gurus,
Can you explain how I can enable Business Area field in Asset Master Record becz it needs be change.How I can acheive this becz it is coming in disabled mode.

Once u ticked the check box save it.Now u can change these field in main asset master record and if u have ticked Su no also then in sub asset master record also.Make sure filed status is optional.
Now u go to AS02 if u want to change the filed for main asset or sub asset
Please assign points

Business area default in asset master record

Dear all
Here is one ticket pertains to asset
when i create asset master record business area will be defaulted
the problem is when i upload asset master record through LSMW
by different business area the system throws a error message BUSINESS AREA EXISTS WHICH CANT BE REPLACED THROUGH LSMW
This is happening for all the asset classes
so i want to remove that default business area from where should i remove that which t-code or menu path
regards ravindra kumar

Dear ravinagh
removing of business area in asset master record is always possible but
see when u r uploading bulk asset master records through LSMW we cant replace the business area as it is already defaulted in asset master record
means some where we have assigned the default values to the asset classes or some other master record
so we have to find out the source of the defualt business area for asset master record
when we remove this from the asset classes then the business area will not be defaulted so that we can upload assets from LSMW with different business area
so please try to find out the source....................
regards
ravindra kumar

Accomodate tax package codes in Asset master record

Hello Gurus,
We are in process of doing conversion from legacy to SAP for one of the division.
This division are maintaining tax package codes in legacy information and want
to maintain in SAP system for reporting purpose.All of Evaluation groups are
being used for other purpose and there are no more for storing this information.
Please suggest me the best solution as what to advise the users and how to store
this information.
Thanks in advance.
Geeta.

Hi
You can make use of Type name(TYPBZ) filed which is available in the origin tab of asset master record.
This field is currently for informational purposes only.
Good Luck
Hari

Flow of Data to Asset Master Record

Hi,
I created a Asset Master record. In 'Origin' Tab in asset master record, there is a space for writing Vendor NAme, MAnufacturer, Acquisition Year, Original Value, etc.
After i create Purchase Order or acquire asset through F-92, i noticed that vendor name, value, etc does not flow to the Asset Master Record.
Please let me now how the data will flow to asset master record ?
Am i missing any entry

Dear Deepak,
please check the Tcode AW01N , this for asset explorer.
In this screen if you select Purchase Order in Object related to Asset tab from the left side of the screen , you will get all vendor details for particular asset.
You can able to see the Migo details also......
If you have any doubt plz let us know.......
Regards,
Pavan.

Populate Depreciation areas to the assets created with no depreciation area

Hi,
We created few Assets under a particular asset class. But only after creating we realised that there were no depreciation areas in it. So I added the depreciation areas to this asset class and then run
AFBN to populate the newly created depreciation areas to the existing assets.But it is not working. Could you please help me to populate these depreciation areas to those existing assets. Is it possible or not?
Please note, the depreciation area tab is completely blank. When I try AFBN for Depr area 01 (Derived Depr area), the system throws a message "Define depreciation area correctly".
I also tried AFBN with "Leave values initial" indicator checked. But still no results.
Do any one of you know how to populate the depr areas to those assets? The User have already created 45-50 assets. If there is no solution, then the last resort is to delete these assets.
Thanks & Regards,
Vinod

Hi Vinod,
AFBN is a simple tool, which copies entries from a source area to a target area. If you have no areas at all defined in the asset master record, there is no source to be copied.
I would propose to delete these assets with AS06 if possible and start over in this asset class. As I understand your description you can not have any posting to such assets up to now.
Regards,
Markus

Group box in asset master record's tab overlap each other

Hi Gurus,
I was wondering anyone has seen the same issue that I'm experiencing. I'm on EHP6 and have logged the issue with SAP but wondering if you've faced the same problem.
I basically designed a new tab layout with 2 tabs and assigned the following group box to the 1st tab
S0001     General
S0003     Time-Dependent Data
S0002     Posting Information
S0013     Equipment
to the 2nd tab I only assigned
S0009     Origin
S0100     Depreciation Areas
Then I assigned the new tab to the asset class.
Now when I create the asset through AS01, the tab and group boxes appear however the time-dependent group box overlaps with posting information (please see below). Have you experienced the same issue in your environment?
Thank you.

Dear Minab,
This is definitively the problem of overlapping of the layouts.
The asset master data transactions AS01, AS02 and AS03 uses a generic tool to define the screen layout. Unfortunately there are some restrictions on that tool which are based on basis functionality.
The problem is caused by compression and resizing (note 203023)
Since Release Enterprise there are more fields on that screen in Release Enterprise than before.
Hence, the problem is caused by the definition of your asset layout the solution in your case could be to move the screen to an own subscreen or to move this screen to the end of the tab.
Please go the customizing (transaction SPRO) and follow these steps:
   Financial Accounting -> Asset Accounting -> Master Data -> Screen
   Layout -> Specify Tab Layout for Asset Master Record -> Define Tab
   Layout for Asset Master Data
Select in your layout the relevant tab page.
Here you may need to change positions and group boxes around. Unfortunately there's no other solution possible due to technical restrictions.
best regards Bernhard

Add depreciation area to old assets (revaluation area)

Hi guys,
I've created a new depreciation area for setting revaluation of assets. This new dep area only contains revaluation of assets (we'll only have revaluation and depreciation of this revaluation in this new area), so I've configured it to manage only revaluation values. Acquisition values are not allowed.
In OABC i've put "00" in the area where this new area takes values from, due to i don't want thhis new area to copy acquisitions values from area 01.
I've made the rest of the configuration also, to support revaluation transactions (mov 800) in this new area. But, I've got 2 problems now:
1. The new area i configured is missing when creating a new asset in AS01. However, when using AS91 the new area shows up. Any idea of why this happens that way?
2. I cannot add the new area in old assets. When using AFBN a message appears: "Depreciation area 20, which you want to create as a new depreciation area in chart of depreciation PVPE, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area."
Message makes sense, because my new area is not copying values from any area (in tcode OABC i defined 00 as dep area source). The question is.. is there any additional tcode where i can add the new depreciation area to old assets?
Thanks in advance.
Eduardo

Hi,
there are the following steps:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :
   3.1 - Indicator: Leave values initial = not ticked.
           The system will copy all the past years values from
           depreciation area 01.
3.2 - Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
Following notes for information:
430618     Procedure for setting up new depreciation area
857601     Parallel currency area and RAFABNEW
301113     Restrictions of RAFABNEW
A Documentation you can find in SE38 entering the   RAFABNEW and press the button documentation.
regards Bernhard

Add custom tab in Asset Master

Dear Experts,
I would like to add a custom tab in asset master (AS01, AS02, AS03).
I have read through the documentation for enhancement AIST0002, but still don't know how to do it.
Can anyone please advise? Thanks a lot.

Hi,
If you have create a proj in CMOD and activated the screen the new tab should be avaliable if it is not it might need some customizing try like below:
Transaction AOLK>>Select your Asset class click on General Assignment of Layout
Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, ZSAP.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
Then, save and come out.
Now, go to tcode AOLK and assign tab layout ZSAP. for asset class 1000.
check now.
Regards,
Himanshu

Asset Master Record - Time Dependent tab - locations to be created

Hi Guru's
Hot to create the new locations in the Asset Master Record - time dependent tab.
Some locations descriptions I need to change.
Please help me.
Regards
Jenny Connes

Hi,
change your location description at following SPRO location:
SPRO->Enterprise Structure -> Definition->Logistic - General ->Define Location
Thanks,
Dharmesh

Post revaluation to selected depreciation area of an asset

Hi,
We are using depreciation area '01' for posting to GL accounts and '02' for fiscal reporting. It turned out that couple of assets had wrong depreciation key specified for depreciation area '02', which resulted in wrong depreciation calculated for '02' in last 3 years.
We would like to correct it now, once we discovered this issue. One of the ideas was to create new revaluation transaction type which is active only for depreciation area '02', which will only change value of asset in that particuaral area without affecting correct '01',
However, after configuring new transaction type in AO84 and assigning it to '02' depreciation area in OAXJ, when I tried to run ABAW for this asset - it gave me error AA 380.
'Inconsistency between the specifications for transaction type Z11 and for the depreciation areas in chart of depreciation PTI.
Depreciation area 02 is defined (in Customizing), so that it is required to take over values from area 01. However, one of these ares cannot be posted to, due to the specifications in transaction type Z11. This combination is not allowed.'
Is it possible to configure postings only to one depreciaton area? If not - is there any other easy way of revaluating only one depreciation area for an asset.
Thank you,
Karol

Hi Blaz,
Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
Thank you,
Karol

Post revaluation to selected depreciation area for an asset

Hi,
We are using depreciation area '01' for posting to GL accounts and '02' for fiscal reporting. It turned out that couple of assets had wrong depreciation key specified for depreciation area '02', which resulted in wrong depreciation calculated for '02' in last 3 years.
We would like to correct it now, once we discovered this issue. One of the ideas was to create new revaluation transaction type which is active only for depreciation area '02', which will only change value of asset in that particuaral area without affecting correct '01',
However, after configuring new transaction type in AO84 and assigning it to '02' depreciation area in OAXJ, when I tried to run ABAW for this asset - it gave me error AA 380.
+Inconsistency between the specifications for transaction type Z11 and for the depreciation areas in chart of depreciation PTI.
Depreciation area 02 is defined (in Customizing), so that it is required to take over values from area 01. However, one of these ares cannot be posted to, due to the specifications in transaction type Z11. This combination is not allowed.+
Is it possible to configure postings only to one depreciaton area? If not - is there any other easy way of revaluating only one depreciation area for an asset.
Thank you,
Karol
Edited by: Karol on Oct 6, 2011 9:54 AM

Hi Blaz,
Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
Thank you,
Karol

How to get the depreciation areas for an asset in particular period

Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.Ch

Try table ANLB, then read ANLC.
Regards.

Error in ME51N - Account object functional area differs from asset master

We are in the middle of going thru an upgrade -
Funds & Functional Area were display fields in the old system but it was recetly changed to required fields in the Asset Master Record (AS01). Now when I try to create a Purchase Requisition for procuring the asset, I get this error - We are in the middle of going thru an upgrade -
Funds & Functional Area were display fields in the old system but it was recetly changed to required fields in the Asset Master Record (AS01). Now when I try to create a Purchase Requisition for procuring the asset, I get this error - Account object functional area differs from that in asset master record. Any suggestions?. Any suggestions?

The functional area what is comming is not the same in Asset accounting as you get from ME51N.
What functional area you get from ME51N and what is the asset.
Is the functinal area in the cost center not the same as you filled in the asset?

Error in ME51N - Account object functional area differs in asset master

We are in the middle of going thru an upgrade -
Funds & Functional Area were display fields in the old system but it was recetly changed to required fields in the Asset Master Record (AS01). Now when I try to create a Purchase Requisition for procuring the asset, I get this error - Account object functional area differs from that in asset master record. Any suggestions?

hi
please check the Asset Master for functional area.

Blank in depreciation area tab in asset master record

Similar Messages

Maybe you are looking for