Blank Screen after starup (like uploading but not)

Hi and help please. I own a 27in Mac. It has been receiving all updates and it has been working perfectly. This afternoon, I start it up, a status bar appeared , and then a small rotating circle indicating some sort of processing. I assume and update was being made. After one hour, and checking my internet connection (3.5MBps) I saw no change. I restarted and situation is the same, no change at all except the blank screen with the grey apple and circle indicating status of some process.
I inserted the CD Rom with Snow Leopard to try to affect it somehow, but the disk is not uploading. You can hear some HDD noices in the beginning, but then they stop.
Please any clue or tip to make it work normally again.
Francisco.

If you have the drive backed up, erase the drive first with your Disk Utility and then do the install.
Dave M.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Similar Messages

  • Blank Screen after logon for all but the Administrator

    I have two new PC’s loaded with Windows 8.1 IT Pro.  My normal setup process after registration is to add the PC to our domain, Install Trend Micro Anti-virus, apply all updates, install business applications, and then create a domain user account. 
    After login onto the PC with the domain user I have the usual Win 8.1 dialog indicating it’s setting up apps and preparing for use.  After about 10 to 15 minutes of this dialog the screen goes blank, I’m sure it’s the screen saver, and then after alt-control-delete
    and entering the user’s password the screen is blank.
    I can alt-control-del and open task manager and run some task but not windows explorer.  I can restart in save mode and see the desktop and start screen but not in normal mode.  I have tried un-installing anti-virus, security updates, adding the
    user to domain admins, and running msconfig and disabling all non-essential processes and service all with the same results.  I’m open for idea’s on what to try next.

    Hi, 
    This issue can be caused if the updates installed improperly, that corrupted user profile.
    We can first try to scan system files by running following command as admin: 
    SFC /SCANNOW
    Any error message, please post back.
    Also, I suggest we restore the system back to the point when the system work fine. Then, to determine which update cause this issue, we can set Windows update manually, and install them dichotomy in checked updates.
    Please pay more attention on driver updates.
    Hope these could help you to  find the root cause. 
    Kate Li
    TechNet Community Support

  • Blank screen after update (KMS related?)

    After the last kernel update I got a blank screen at boot. I'm not sure, but I think it happens when KMS kicks in. I think it's related to a broken EDID I've been fighting for months. The stop-gap measure I'd been using so far is to have a custom config in xorg.conf.d and booting to a DM, but that doesn't seem to work with the new kernel.
    I get a ton of messages like this:
    Oct 15 17:43:59 localhost kernel: [ 169.292445] Raw EDID:
    Oct 15 17:43:59 localhost kernel: [ 169.292461] 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 13 00
    Oct 15 17:43:59 localhost kernel: [ 169.292464] 13 0f 01 03 68 22 1b 78 ef 8b c5 a4 5a 48 9b 25
    Oct 15 17:43:59 localhost kernel: [ 169.292466] 1a 50 54 bf ef 00 81 80 71 4f 01 01 01 01 01 01
    Oct 15 17:43:59 localhost kernel: [ 169.292468] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
    Oct 15 17:43:59 localhost kernel: [ 169.292470] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 32 4b 1e
    Oct 15 17:43:59 localhost kernel: [ 169.292472] 52 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 43
    Oct 15 17:43:59 localhost kernel: [ 169.292474] 4d 43 20 31 37 22 20 41 44 0a 20 20 00 00 00 ff
    Oct 15 17:43:59 localhost kernel: [ 169.292476] 00 30 0a 20 20 20 20 20 20 20 20 20 20 20 00 5e
    Oct 15 17:43:59 localhost kernel: [ 169.357340] Raw EDID:
    Oct 15 17:43:59 localhost kernel: [ 169.357354] 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 13 00
    Oct 15 17:43:59 localhost kernel: [ 169.357356] 13 0f 01 03 68 22 1b 78 ef 8b c5 a4 5a 48 9b 25
    Oct 15 17:43:59 localhost kernel: [ 169.357358] 1a 50 54 bf ef 00 81 80 71 4f 01 01 01 01 01 01
    Oct 15 17:43:59 localhost kernel: [ 169.357360] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
    Oct 15 17:43:59 localhost kernel: [ 169.357362] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 32 4b 1e
    Oct 15 17:43:59 localhost kernel: [ 169.357364] 52 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 43
    Oct 15 17:43:59 localhost kernel: [ 169.357366] 4d 43 20 31 37 22 20 41 44 0a 20 20 00 00 00 ff
    Oct 15 17:43:59 localhost kernel: [ 169.357369] 00 30 0a 20 20 20 20 20 20 20 20 20 20 20 00 5e
    Oct 15 17:44:00 localhost kernel: [ 169.418576] Raw EDID:
    Oct 15 17:44:00 localhost kernel: [ 169.418588] 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 13 00
    Oct 15 17:44:00 localhost kernel: [ 169.418590] 13 0f 01 03 68 22 1b 78 ef 8b c5 a4 5a 48 9b 25
    Oct 15 17:44:00 localhost kernel: [ 169.418592] 1a 50 54 bf ef 00 81 80 71 4f 01 01 01 01 01 01
    Oct 15 17:44:00 localhost kernel: [ 169.418594] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
    Oct 15 17:44:00 localhost kernel: [ 169.418597] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 32 4b 1e
    Oct 15 17:44:00 localhost kernel: [ 169.418599] 52 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 43
    Oct 15 17:44:00 localhost kernel: [ 169.418601] 4d 43 20 31 37 22 20 41 44 0a 20 20 00 00 00 ff
    Oct 15 17:44:00 localhost kernel: [ 169.418603] 00 30 0a 20 20 20 20 20 20 20 20 20 20 20 00 5e
    Oct 15 17:44:00 localhost kernel: [ 169.479826] Raw EDID:
    Oct 15 17:44:00 localhost kernel: [ 169.479839] 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 13 00
    Oct 15 17:44:00 localhost kernel: [ 169.479841] 13 0f 01 03 68 22 1b 78 ef 8b c5 a4 5a 48 9b 25
    Oct 15 17:44:00 localhost kernel: [ 169.479843] 1a 50 54 bf ef 00 81 80 71 4f 01 01 01 01 01 01
    Oct 15 17:44:00 localhost kernel: [ 169.479845] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
    Oct 15 17:44:00 localhost kernel: [ 169.479847] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 32 4b 1e
    Oct 15 17:44:00 localhost kernel: [ 169.479849] 52 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 43
    Oct 15 17:44:00 localhost kernel: [ 169.479851] 4d 43 20 31 37 22 20 41 44 0a 20 20 00 00 00 ff
    Oct 15 17:44:00 localhost kernel: [ 169.479854] 00 30 0a 20 20 20 20 20 20 20 20 20 20 20 00 5e
    Oct 15 17:44:00 localhost kernel: [ 169.479862] nouveau 0000:01:05.0: >VGA-1: EDID block 0 invalid.
    Oct 15 17:44:00 localhost kernel: [ 169.479868] [drm] nouveau 0000:01:05.0: DDC responded, but no EDID for VGA-1
    Oct 15 17:44:00 localhost kernel: [ 169.503357] [drm] nouveau 0000:01:05.0: Load detected on output A
    Is there anything I can do to fix this problem once and for all?

    I can confirm that this is definitely caused by KMS. It doesn't make any difference whether I'm using nouveau or the proprietary drivers, but I can get into a login prompt by adding nomodeset to the kernel parameters. It's been suggested to set the resolution manually like this:
    video=VGA-1:1280x1024@75
    And that does set the resolution, but I end up getting a blank screen anyway.
    I've switched to linux-lts for now, but obviously this is not a permanent solution. Does anyone have any idea of what I should do? There doesn't appear to by any definitive information about what to do when KMS fucks up.

  • Laptop only coming up with a blank screen after set-up?

    Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
    Cheers

    Hello @15_,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Blank screen after KitKat update

    I just completed the KitKat update on an Ellipsis 7 tablet that's connected to Verizon's network, but now I'm only getting a blank screen after the welcome screen displays. Fyi: the first part of this update went smoothly. Can anyone can help me resolve this issue? I really like this tablet and use it everyday.

    I contacted Verizon support and a couple of techs attempted to walk me through alternate boot methods. However, as bassclarinetl2 noted, "pressing the power button to turn the device off results in the device powering up by itself and both 'safe mode' and 'factory reset' are inaccessible via their button combinations." Therefore, I'm sending my tablet in to be repaired or replaced under warranty. Depending on how long you've had your Ellipsis 7 tablet, you may be able to do the same.
    Incidentally, I have another (seemingly) identical Ellipsis 7 tablet and was able to successfully install the KitKat upgrade on this second tablet, which I'm using now. The sooner Verizon determines why the upgrade worked on one tablet and not the other, the better.

  • Blank Screen after Hibernate

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

  • SAP BPC 10.0 Web Client Blank Screen after login

    Hi ALL,
    We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
    We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
    Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
    I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
    If you have the same issue, kindly share..
    Thanks and regards,
    Hery

    Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
    Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
    Thanks and regards,
    Hery

  • 3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

  • PC fails to reboot and shows blank screen after automatic windows updates including SP

    Pavilion- a1130n"  WINXP ProfessionalC fails to reboot and shows blank screen  after automatic install ing windows updates including SP 3

    I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
    build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
    I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

  • Blank  screen after signing in

    I'm stuck in a blank screen after signing in.  The options to sign in or sleep function, but nothing else. And when I sign in the screen is blank.

    I am new to the "community thing"... I have the same question as you regarding the blank screen... I do not see any answers to your questions or know how to get to them...

  • Blank Screen after 703HP3 (Linux)

    Hi,
    after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    HP703HP3 I got a blank screen after starting the machine.
    All logs look got but I can't login in. Only a blank web page. No login. No
    picture. Nothing.
    Any idea?
    Have anybody the same problem?
    I went back to my snapshot. So my user can login.
    Now I will try it at another server.
    Andreas

    Hi Massimo,
    the login web page for webaccess for the user...
    Andreas
    "Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]..
    > Hi,
    >
    > Andreas Schild wrote:
    >>
    >> Hi,
    >>
    >> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    >> HP703HP3 I got a blank screen after starting the machine.
    >
    > What do you mean "a blank screen"? A blank screen where?
    >
    >> All logs look got but I can't login in. Only a blank web page. No login.
    >> No
    >> picture. Nothing.
    >
    > I'm sorry, but it's totally unclear what you're talking about. What web
    > page?
    >
    > CU,
    > --
    > Massimo Rosen
    > Novell Product Support Forum Sysop
    > No emails please!
    > http://www.cfc-it.de

  • Bootcamp goes blank screen after startup sign.

    I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

    @MT1 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Blank screen after login in SAP CRM 2007

    hi,
    we are experienceing blank screen after we login to crm2007 web client.
    what we have done
    - implemented sap note 168941, 612670, 1045941, 1144511
    - assign PFCG role to business role
    is there any other step we missed?
    Thanks.

    Hi friend,
    Please, check if in your pfcg profile you have the objects:
    uiu_comp
    CRMCONFMOD
    with value *
    Regards,
    Lalas

  • Blank screen after setting back to Factory Default Setup

    After setting an HP Pavillion laptop with Windows XP back to the default factory setup, I get nothing but a blank screen after turning the laptop on.  The HP screen doesn't appear, there is just a blank screen.

    I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

  • BLANK SCREEN AFTER WINDOWS 7 LOGIN

    Hi, I am getting a blank screen after i login. -I have no available restore points-safe mode works fine-Explorer.exe works but some programs play up and i dont really want to do a clean install  Please help !

    Same problem  I've found a solution.
    #1 Hit fastly 5 time the left shitf button on your keyboard.
    A windows will appaers to know if you want to caps lock. Keep it open
    #2 Alt-CTRL-Del
      You have know your desktop
    #3 Go on add-remove programme
    3a) Go on windows add-remove
    3b) Remove internet explorer
    ok-ok-ok - untill it's remove and ask to restart
    #4 No more problem. You have to go on the net with chrome or firefox.

Maybe you are looking for

  • Using Ipod as a Flash USB Drive

    I'm planing to buy an Apple IPod Shuffle, but I would like to use it more like a portable USB Drive, to transfer any kind of files, like Word documents, small video files, pictures, etc. I understand that the ONLY way I can listen music directly form

  • Trying to figure out how to use my xml with a tree component

    Hi All, I am trying to use a tree control for the first time and having a bit of difficulty. I have a Domino server that will generate XML for a specific view of information. The view looks just like what a tree control would look like. I wish I coul

  • Change content of the PO while using Approval Procedures

    When a PO is created as draft and waiting for approval we were able to find it back in the draft request list but not be able to do any change in the PO. Is there any possibility to allow changes in the draft PO before the approval was done? Also we

  • How to know fiscal year start date?

    How can I know when is the starting date of the fiscal year of my company from the tables or FM? They told me it is April 1st. Can I get this information from any SAP tables? I just don't want to hardcode that in my report. Thank you very much.

  • FlashPaper & Command Line Conversion

    Hello, I need for work purposes to use FlashPaper for ppt pdf swf conversion, but I want to do such things from our J2EE FlashCom webapp (calling run.exec("C:\Program Files.....\flashpaper.exe... ")) as if we were running FlashPaper from command line