BLANK SCREEN AFTER WINDOWS 7 LOGIN

Hi, I am getting a blank screen after i login. -I have no available restore points-safe mode works fine-Explorer.exe works but some programs play up and i dont really want to do a clean install  Please help !

Same problem  I've found a solution.
#1 Hit fastly 5 time the left shitf button on your keyboard.
A windows will appaers to know if you want to caps lock. Keep it open
#2 Alt-CTRL-Del
  You have know your desktop
#3 Go on add-remove programme
3a) Go on windows add-remove
3b) Remove internet explorer
ok-ok-ok - untill it's remove and ask to restart
#4 No more problem. You have to go on the net with chrome or firefox.

Similar Messages

  • [SOLVED] Blank screen after SLiM login

    Hello everyone, I'm very new to Arch as of a few days ago and I have been attempting to set it up in just about all the free time I can spare. I think I've spent about 20 hours total trying to get things up and running.
    I am attempting to run Arch with LXDE, openbox, and SLiM. I finally managed to get SLiM up and running where I can login without receiving any errors. However, after I try to login I'm brought to a blank screen. Now.. I'm new to this and have followed all the Knowledge Base Documentation on how to get these three running but I guess apparently I'm missing something somewhere...
    Keep in mind I have to type this manually as I do not have any Internet program installed. Maybe if someone can point out my error or make an additional recommendation, that would be great. I really hope I'm not asking too much, even a link to something that may help I would greatly appreciate.
    I'm pretty sure it's something stupid I'm missing.. again, I've read through the Knowledge Base Documents numerous times and simply cannot find out what I'm doing wrong (I have the ATI Open Source driver installed).
    ~/.xinitrc (I have this setup for ~/ and /home | this is also set as executable)
    #!/bin/sh
    #~/.xinitrc
    #exec ck-laungh-session dbus-launch openbox-session
    login_cmd exec ck-launch-session dbus-launch --sh-syntax --edit-with-session /bin/bash -login ~/.xinitrc %session
    /etc/rc.conf (skipped to the DAEMONS section)
    DAEMONS=(hwclock syslog-ng network netfs crond slim)
    If you need any more information I'd be glad to provide it if anyone is willing to help..
    Thank you.
    EDIT: Fixed typos..
    Just another note. I can see my mouse after I login from SLiM and if I press alt+ctrl with any arrow key I can see the workspaces window pop up.
    Last edited by Ness (2012-03-11 22:19:06)

    loafer wrote:
    Just to be clear slim.conf should contain the following with no reference to lxde.
    login_cmd exec ck-launch-session dbus-launch --sh-syntax --edit-with-session /bin/bash -login ~/.xinitrc %session
    .xinitrc should contain:
    exec startlxde
    And ensure that dbus is in rc.conf.  Place it after netfs.
    I made the changes you suggested, now what happens is when I login to SLiM with my end-user, the screen goes black for a moment, then right back to the login screen.
    EDIT: changed "--exit-with-session" to "--edit-with-session" in /etc/slim.conf
    EDIT 2:
    Is the ~/.xinitrc supposed to be setup like..
    login_cmd exec startlxde ck-launch-session dbus-launch --sh-syntax --edit-with-session /bin/bash -login ~/.xinitrc %session
    or is it simply supposed to be
    exec startlxde
    Hope I'm not asking too much.. I just don't want a broken system..
    EDIT 3: Apparently it's "horrible typo day" for me. I had --exit-with-session before. I just typed it wrong in my post. Changed it back.
    Last edited by Ness (2012-03-11 21:47:19)

  • I have blank screen, after windows 8.1 upgrade on HP Pavillion 15-e005sv.

    I have blank screen, only mouse pointer working after
    windows 8.1 upgrade on HP Pavillion 15-e005sv.
    Any help please.
    This question was solved.
    View Solution.

    First of all you need to get into safemode
    for that press f8 or del key while starting the computer
    then you will get many options there you must go to safemode
    Secondly ,after getting to safemode go to 1.control panel ->2.Device Manager->3.Disable AMD HD Graphics
    Thats all
    then restart your computer to get into normal mode
    May be if you upgrade your amd hd driver your black screen problem will be gone

  • Login Problem:  Blank screen after the login window?

    I have a user who has a 2008 MacBook Pro 15" Intel laptop running 10.5.4. It is bound to AD, with managed mobile account on the laptop (cached user credentials). The user is off the LAN right now on a road trip and is having problems logging into the laptop. When she logs in with her user ID and password, the login window takes a long time (15 minutes!) to authenticate her, and then when the login window finally goes away and the user's profile starts to load (expecting to see the Finder, Dock, menu bar UI etc), nothing happens - the screen sits at the default desktop picture and the user's account never loads.
    Her AD password has not expired. She is a local admin on the laptop too.
    Other local user accounts can log into the laptop without problems.
    I have 100+ other identical users who dont have this problem.
    I assume that a user-specific file has been corrupted. Any guess on which ones?

    Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
    http://supportforums.blackberry.com/t5/BlackBerry-​10-OS-Device-Software/Upgrading-OS10-devices-using​...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Geforce FX 5200 - blank screen after Windows Xp logo

    Well, the topic say it all. Ive updated the drivers for my MSI Geforce FX 5200 card and now just after the Windows Xp logo disapear the screen turns black but its ON, he gets signal, if not it should say that i don´t have signal. Ive rebooted using safe mode, removed all the drivers and now im using the PC without any drivers, but i have stuff to do and i need to put this online again. Ive already tryed to use the previous drivers without any luck, same problem.
    Apreciate your help!
    Thanks!

    Ive tryed NVIDIA Display Driver for Windows 2000/XP version 72.12 from the MSI website, they didn´t work. Ive entered in safe mode, removed the drivers and then ive tryed out 81.98_forceware_winxp2k_english_whql.ex e from the Nvidia website, it didn´t work also. Finaly i tryed to place the old one 66.93_win2kxp_english.exe, also from Nvidia website that ive downloaded sometime ago, guess what, didn´t work. I already used NFR, nasty file remover, but without any luck. Im going to try to use Driver Cleaner Pro now to see what hapens, or you sugest something else?
    Thanks!

  • Blank screen after login in SAP CRM 2007

    hi,
    we are experienceing blank screen after we login to crm2007 web client.
    what we have done
    - implemented sap note 168941, 612670, 1045941, 1144511
    - assign PFCG role to business role
    is there any other step we missed?
    Thanks.

    Hi friend,
    Please, check if in your pfcg profile you have the objects:
    uiu_comp
    CRMCONFMOD
    with value *
    Regards,
    Lalas

  • SAP BPC 10.0 Web Client Blank Screen after login

    Hi ALL,
    We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
    We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
    Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
    I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
    If you have the same issue, kindly share..
    Thanks and regards,
    Hery

    Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
    Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
    Thanks and regards,
    Hery

  • PC fails to reboot and shows blank screen after automatic windows updates including SP

    Pavilion- a1130n"  WINXP ProfessionalC fails to reboot and shows blank screen  after automatic install ing windows updates including SP 3

    I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
    build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
    I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

  • After upgrading to the newest version of firefox my Juniper J-web web-gui showing a blank screen after login.

    Hi.
    After the newest version of firefox the browser only show a blank screen after doing the login on all Juniper SRX devices.
    Some one who can help me here?
    Kind regards
    Jonas (Denmark)

    Jonas,
    Please see:
    *[https://support.mozilla.org/kb/Server+not+found]
    *[https://support.mozilla.org/kb/Firewalls]
    *[http://kb.mozillazine.org/Error_loading_websites]
    *[http://kb.mozillazine.org/Browser_will_not_start_up]
    It could be that you need to reset Firefox to its defaults, however there could also could be something going wrong with the login request. Please check the Firewalls and loading websites to see if anything is blocking a request.

  • Blank Screen after 703HP3 (Linux)

    Hi,
    after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    HP703HP3 I got a blank screen after starting the machine.
    All logs look got but I can't login in. Only a blank web page. No login. No
    picture. Nothing.
    Any idea?
    Have anybody the same problem?
    I went back to my snapshot. So my user can login.
    Now I will try it at another server.
    Andreas

    Hi Massimo,
    the login web page for webaccess for the user...
    Andreas
    "Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]..
    > Hi,
    >
    > Andreas Schild wrote:
    >>
    >> Hi,
    >>
    >> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    >> HP703HP3 I got a blank screen after starting the machine.
    >
    > What do you mean "a blank screen"? A blank screen where?
    >
    >> All logs look got but I can't login in. Only a blank web page. No login.
    >> No
    >> picture. Nothing.
    >
    > I'm sorry, but it's totally unclear what you're talking about. What web
    > page?
    >
    > CU,
    > --
    > Massimo Rosen
    > Novell Product Support Forum Sysop
    > No emails please!
    > http://www.cfc-it.de

  • Blank Screen after Hibernate

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

  • Laptop only coming up with a blank screen after set-up?

    Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
    Cheers

    Hello @15_,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Blank screen after setting back to Factory Default Setup

    After setting an HP Pavillion laptop with Windows XP back to the default factory setup, I get nothing but a blank screen after turning the laptop on.  The HP screen doesn't appear, there is just a blank screen.

    I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

  • Bootcamp goes blank screen after startup sign.

    I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

    @MT1 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • 3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

Maybe you are looking for

  • Recording Live DV. Is this possible?

    The church that I work at uses a program called VT4 for live computer based switching. I would like to run a firewire out of that computer(pc) into my Mac so that I can record and save the sermon as a quicktime file. Is this possible to do in Final C

  • Errors trying to reinstall ITunes & Quicktime

    Been trying to reinstall Itunes, Had been getting an Error 1316, got past that one but now just as it looks like quicktime is finished installing I get: "Could not open key: HKEYLocalMachine\software\classes\quicktimeplayerLib.QuicktimePlayerAPP\CLSI

  • Error in itunes when connecting ipod

    hi if anyone could help me it would be good. when i connect my ipod and it loads itunes it displays an error message saying the file or directory itunes/iprefs is corrupt and unreadable what can i do?

  • Dialog always visible in top ???

    hi, i would like to display a dialog not modal, but always visible in top, even when its looses focus and other "nomal" dialogue are displayed, as a "color palette" dialogue or something like that, can you please tell which class is more suitable for

  • CORBA in OC4J not working

    Hi all, I have completed instalation of O9iAS (Win 2000) and OC4J without any errors but I am still unable to run petstore in OC4J. I can populate the tables but any call of mainservlet results in 500 internal error. As obvious from stack trace, corb