Blank Sheet at beginning and between every printed page; Separator Page dialog box is blank.

I followed directions of another blog and when I got to the Separator Page dialog box, it said to "delete all templates listed in the Separator Page box", but mine was blank. If I click on the browse button, I do find pcl,sep; pscript.sep; sysprint.sep; and sysprtj.sep files. Do I delete these sep files? I have a HP Photosmart C7280 All-in-One Printer and am using Windows 7 (had same problem with VISTA).

I had this issue using FF 5.0, I fixed it by doing the following :
# Go to firefox button, select options, options.
# Find all the applications that are listed as Adobe
# Change the action from 'Use Adobe Reader (in FireFox)' to 'Use Adobe Reader'
Fixed :)

Similar Messages

LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have a mozilla short cut on my desk top. It looks like a blank sheet of paper and i can not delete it

i have a Mozilla firefox short cut on my desk top. It looks like a blank sheet of paper and i can not delete it.Im the administer of the PC i keep trying but it says i don't have permission. i uninstalled then reinstalled Firefox but i still can't delete the shortcut that doesn't work and looks like a blank sheet of paper. please help me thanks.

Thanks for your help. I learnd a new trick. :)

Turning off headers and footers when printing a web page.

Is it possible to turn off (or reduce the size of) the
default header and footer
when printing a web page? I am using Internet Explorer 6.0.2
900, and only want
it to work with my computer and a specific printer.
I am using the directive @page normal { size : portrait;
margin : 0;} in a CSS
stylesheet specified as media="print".
Clancy

On Sat, 19 Jan 2008, David Powers wrote
>However, you are very selective in your quote. Michael
goes on to say
>(and I agree with him on this point):
>
>"The problem with logical inches and all other fixed
units of measure
>is that they do not scale well on systems with different
dot-per-inch
>settings. What may seem just right in Windows at 96 dpi
may be too
>large or too small on other systems.
Of course, but It's not a problem with logical inches per se.
The
logical inch is just another way of looking at what is meant
by the
screen dpi value. Scaling problems, with different dpi
settings, has
always been a Windows problem and results from the way that
the OS
handles scaling. Fonts scale perfectly. Actual windows, and
other
containers, don't. This is a problem programmers have
grappled with
since the first Windows OS. Vista is the first OS to try to
tackle this
problem.
>Thus, percentages or ems work best when cross-platform
compatibility is
>desired."
And that is because the users screen dpi, and hence logical
inches, are
totally irrelevant when specifying ems and percentages.
Ems and percentage equate to a number of pixels, not inches.
The sole purpose of screen dpi setting is to convert anything
sized in
physical inches into a number of screen pixels. That is the
_only_
purpose of screen dpi. It's a very simple algorithm.
(physical) inches x screen dpi value = number of pixels
How do _you_ think a font sized in points (inches) gets
translated to a
specific number of pixels on screen. I'd be interested in
your answer.
For the screen a conversion from physical inches to pixels is
always
necessary because, as you say, pixels are the unit of screen
measurement
but they are not just a "standard" measurement, they are the
only
consistent measurement. It's not the users program that
creates pixels
on screen but the Operating System. The program requests the
OS to
create a given font at a given size and the requested size
_must_ be in
pixels. Windows can't _directly_ create a screen font that's
specified
in points (inches) because it has no notion of what a
physical inch is
on screen. It does know what a logical inch is because the a
logical
inch is defined by the screen dpi value. That's what the
screen dpi
value is for. If a browser programmer wants to bypass the
variability of
screen dpi on different computers then they ignore dpi values
and work
directly in pixels i.e. in ems or percentage. When ems and
percentages
are specified one is dealing only in pixels.
> It makes a lot more sense in terms of website design to
set a
>font-size of 14px than use units that both you and
Michael Bowers
>define as "1/72 of a logical inch".
Of course it makes more sense to set font size specifically
in pixels
because that's the only unit the OS can use to put something
on screen.
I can't see where you get the idea that either Michael Bowers
or I have
said that there is a unit "defined as 1/72 of a logical
inch". Every
Windows program written takes it that there are 72 points to
a
_physical_ inch.
>
>Yes, you *can* use points to set font sizes (or any other
measurement)
>in CSS for onscreen display, but your fixation with
logical inches
>appears to add little of practical value to choosing the
most
>appropriate measures for designing pages to be viewed on
displays of
>various sizes and resolutions.
You are implying I've said things which I haven't. I have
never, at any
time, said one should use points or inches in designing web
pages. You
seem to have missed the point that what I am doing is
explaining why you
see the results you do on screen when those unit are used.
Somewhat more
informed than "Points are only for print because I don't know
what they
mean on screen, so they must be meaningless".
>As Eric Meyer says on page 110 of "Cascading Style
Sheets: The
>Definitive Guide" (2nd Edition), "points can be a very
difficult
>measurement to use in document design."
And again, I've never advocated using them in page design. A
close
reading, however, from page 83 onwards shows that Eric Meyer
has an
imperfect notion of the meaning of screen dpi. Heresy!! He's
hardly
alone, which is why I did a web site.
>
>That's why I recommend leaving points for use in print
style sheets.
>However, if you enjoy making life difficult for yourself
by using
>points for onscreen design, you're perfectly free to do
so.
Once again, I have never advocated that. You are setting up a
straw man
to knock down. You can do better than that.
Richard Mason
http://www.emdpi.com

I chose double sided printing and it only printed half the pages. it didn t ask me to flip them

I chose doubke sided printing on my F2280 and it only printed half the pages for me. . . . . .I didn task me to flip them round and continue and it is quite a big document to print it over again
can you help please? : )
Thanks

Sometimes the wireless MagicMouse can be erratic and seem to automatically zoom in, etc. Try going to System Preferences and detuning the sensitivity settings, see if that helps.

Character Styles dialog box suddenly blank - cannot fix

Things were going funky (InDesign ignored all standard keyboard commands unless I clicked first into note pad), so I stopped, shut down and restarted the entire computer. Upon reload, my file came up, however, the character styles dialog box was blank (options to add and import etc. are still visible in the breakout to the right, but nothing appears in the box itself now matter the document).
Is there a prefs file that I can delete to restore this (much like the old aiprefs?) or is this going to require an entire uninstall of the design suite and reinstall?
Has anyone else seen this? Anyway to fix this?
EDIT: Oops here's my set up:
OS: Vista
HP Pavillion
Any help would be greatly appreciated. I'd love to avoid a reinstall if possible.
-Suzanne

OK got it... in case anyone else needs to know:
Go to: [username] > Application Data > Adobe > InDesign > Version X (your version)
Drag that entire Version 4.0 folder to your desktop and then start InDesign again. It will recreate the entire Version 4.0 folder and its myriad files. I say “drag it to the desktop” instead of deleting it because you might have finely-tuned workspaces or long lists of AutoCorrect entries that you’d like to hang on to.
Found it on the InDesign Secrets blog.

HT5132 I have tried this at least a dozen times and nothing happens....the dialog box comes up but no signs of downloading occurs even after 3 hours!!

I have tried this at least a dozen times and nothing happens....the dialog box comes up but no signs of downloading occurs even after 3 hours!!

Try to download your MobileMe galleries directly from the Internet:
Go to the System/MobileMe preference pane
Press the button,Visit me.com,
this will bring you to your MMe galleries and you can download the photos from there.
Usually this direct way will be faster.
To be able to use Aperture again, don't press the ok. button, when the MM panel appears, but the "learn more". then you can open the "File" menu in Aperture and use the "Web Accounts" menu entry to "Edit Web accounts" and disable MobileMe in Aperture by deleting it from the accounts list.
Regards
Léonie

HP 7310 spits out multiple blank sheets after copy and/or print

After I print or copy anything on my 7310 all-in-one it continues to spit out blank sheets of paper. I've reset the printer, searched for a software upgrade, checked the settings and everything seems to be normal.
Any suggestions?
Thanks

What happens if you insert a black cartridge instead of the photo cartridge and then try to print?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Used to be able to print multiple page pdf files on my HP 7310 all in one and then it stopped and would only print the curent page. This is tedious for long PDF docs. I am on 10.6.8 .

Used to be ablert to print multiple page pdf files on my HP 7310 all in one printer and now I can only print the current page and therefore it takes forever printing them one by one. I am in version 10.6.8. Tried printing as image using the advanced click and that did not work either. I have Adobe 9.0 reader installed.

I tried this earlier, and I tried it again today. Both times it said "Software Missing!" and "HP Software required to connect to your printer over the network could not be found on this computer." But when I tried to install the software (AIO_CDB_Net_Full_Win_WW_130_141.exe, which I downloaded from HP's web site), it wouldn't install, as described above. In the diagnostic utility, I clicked "skip", and it said "Connection Verified!", and "The printer is connected to the network and the services related to the network connections have been verified and reset to a normal operating state. Everything appears to work fine at this point. Please doa test print to verify that the issue is resolved or click Skip to move to the next step." I clickedthe "Test Print" button, and immediately it popped up a box that said "Test Print Failed."
I tried again to install the HP software, and it installed, detected the printer, and asked me to select it. I selected the printer, clicked "next", and it did its network diagnostics. Then it said "Problem(s) found with your network" and "Problem(s) may exist with the network functions of your printer . . ." I continued the installation without connecting to the printer. Then I ran your network printer diagnostic tool again, and got the same result - "HP Software required to connect to youir printer over the network could not be found on this computer."

Message 'printing error' and termination of printing after first page

Each time i try to print anything, that is more than one page long, it successfully completes the first page of printing and then terminates printing part way through the second page. I have uninstalled and reinstalled the software and done all of the troubleshooting that i can access but i am still having the same problem.
I am printing wirelessly from my laptop.
Can anyone help me to understand why this is happening and what I can do to rectify it?

Thanks Ken,
Not sure how to check if we do have OPI comments on some of the images, but looks like I have found a solution to the printing problem at least.
Thanks to a respons by Peter Spier to another topic with similar problems:
Peter Spier - 4:00am Mar 11, 08 PST (#5 of 6)
The symptoms could describe document corruption rather than network issues which might fall into the category of things that can be cleared up through export to .inx.
Try exporting one or two of the problem files to interchange format, open those and save as new .indd and make a new book file. See if that behaves differently across the network.
I also found another article about INX files, that confirms this technique:
http://avondale.typepad.com/indesignupdate/2005/08/what_the_heck_i.html
"...INX can also help “clean up” problem files in InDesign CS2—if you’re running into problems, especially with files that started their lives as QuarkXPress or PageMaker files, try exporting the document as INX and then opening that file."
So, I
1. exported all files, one by one to INX or InDesign InterChanged
2. Then reopened those files, saved back as regular .indd files
3. Reopend the new file (hoping for a refreshed file and test to see if it would open without problems.)
4. Then packed the files indevidually and reopend the new packed files when done.
Alle the files now print without any problems but export to PDF still fails with the same error message.
Would the OPI comment be a problem here maybe?
Thanks!
bard

I can print while on line and i can print a test page. but i can not print an xl page

i can't print an xl page. test page is ok

xl page?
what size is that?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

MULTIPLE PRINTS FROM MB90 WITHOUT DIALOG BOX

Hello Friends ,
I am to take print of goods receipt voucher from MB90 .
i have attached my smartform and program their its working fine , but i want to
print of all the documents together not indididual , for that i have suppressed the dialog box but
at a time time its giving only one print .
kindly explain me with elaborated steps .
Regards
Digvijay Rai

Hello Friends ,
I am to take print of goods receipt voucher from MB90 .
i have attached my smartform and program their its working fine , but i want to
print of all the documents together not indididual , for that i have suppressed the dialog box but
at a time time its giving only one print .
kindly explain me with elaborated steps .
Regards
Digvijay Rai
Hello
Are you taking the user´s printer?
All the goods receipts are in a internal table? If so, you can do a loop in this internal table and call your smartform.
Post here your solution, we can discuss about it
Kleber Santos
Edited by: Kleber Santos on Feb 1, 2009 5:32 AM

Cannot print to canon MP160, dialog box says printer off line, but it is on line, OK printing with IE

I just installed the Canon MP160 printer. I downloaded the driver software from Canon version 12.1.4.0.(2/8/2008). I can print documents fine from Internet Explorer. When I go to print from Firefox the printer dialog box says the printer is "off line" and I get printer queue error messages. I can also print OK from windows. I have a PC 32 bit with Windows Vista.

PAHU wrote:
I think your issue is that even though you have the latest 10.2.0 driver for 10.9, you added the printer using the previous v2.43 PPD. So open Print & Scan, remove the current printer for the iRC3380 and click the plus button to add again. After selecting IP > LPD and entering the IP address, ensure you select "Canon iR C2880/C3380" in the Use menu. Note that there is no mention of UFRII in the model name, as is the case with the previous UFR2 v2.43 driver.
Thanks for the suggestion. I did that this morning (see Step 1) and deleted the existing printer before re-adding a new printer and using the newly updated driver and printer description. Here's what I get:
You can see my model number is listed in there as is the the proprietary Canon UFRII language.
Once added, here's what happens next:
So it would appear, at this point, that the printer is installed and communicating and that I should be good to print.
Alas, I get the same error message I've been getting. back to square one.

Secure printing problems with the dialog box

Hi!
Some one which has problem with the scure dialog box then using secure printing?
then we print in Adobe acrobat reader X 10.0.1 the dialog box for entring your pin nummer appearing under acrobat, causeing the program to locking until you go to the dialog box and clicking on it and enter the pin. The problem is that adobe not showing the dialog box in front of the printing overall dialog.
had nog problem with the old 9, it started then we uppgraded. Haw tride a nother driver but haw same issue. And all other programs works greate, word, notepat etc so it is just Adobe that has the problem.. ?
/J

Hi!
Its´s XP sp3 and the printer is a network printer(Toshiba e-studio 4520c) running a PCL6 driver.
Screen capture is not so much to see i think, running Swedish interface to. The ordinary dialogbox för printing is the first thing thats pops up, and then adobe reader frezes because the secund box pops up under adobe, you can click on it in the "toolbar" to continue. One thing that is diffrent when you print in adobe is that you can se on the "toolbar" for the popup box for the pin/password box is a Adobe icon on it. It is not so in example when printing in word, ie8 etc.
The problem is that many users dont see it and thinks the program has stopt working.
Im now going to try the PS driver from toshibas homepage..
thanks for help!

Some extension dialog boxes are blank

When I press on some extension buttons (for example Ghostery, Self-Destructing Cookies) on top bar, or on menu bar, to open their dialog boxes, those boxes opens but looks like white blank boxes. They worked before, but now they are empty.
Here an example: http://c2n.me/jqqe35.jpg

This issue can be caused by the Ghostery extension.
*[[/questions/1020685]] Ghostery add-on + FF 31 and newer = Blank options window
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Blank Sheet at beginning and between every printed page; Separator Page dialog box is blank.

Similar Messages

Maybe you are looking for