Block a PO line items whose asset is deactivated

I have a custom requirement , where the user wants to bolck the PO line item even if its asset is deactivated.Is that possible ?
Do we have any enhancement points where we can write a code so that the SAP does not check whether the the asset is active or inactive ?
Note : I'm using me22 transaction using BDC method.
Any pointers would be helpful.
Thanks & Regards,
Arun Thiyagarajan

Can u tell me what was your approach then. As said i found no user exits or so.... is there any implicit enhancement point which we can create to overcome , if so provivide the detail of the same
Thanks and Regards
Arun

Similar Messages

  • How to take Profit Center Wise (Customer Line item & fixed assets)?

    Profit Center Wise (Customer Line item & fixed assets)
    GL Report: S_ALR_87012282 (Profit Center wise GL A/C Line item)
    AP Report: S_ALR_87012103 (Profit Center wise Vendor A/C Line item)
    Similar for I want customer line item wise and fixed asset line item (profit center wise) report, S_ALR_87012197* this for customer line item wise report but,Here in the dynamic function there but not available in profit center, I need report what t.code available in profit center wise customer line item and fixed asset line item.
    Thanks in advance
    Selva

    Hi Sweta
    For obtaining profit center wise receivables/payablees and stock reports, you may need to follow these steps at every period end.
    1. Execute F.5D - Calculate Balance sheet adjustment
    2. Execute 1KEK - Transfer Payables/Receivables
    3. Execute 1KEI - Transfer Assets
    4. Execute 1KEH - Transfer material stocks
    5. Execute 1KEJ - Transfer Work in progress
    For more information, you can read the heading "Balance Sheet Items in Profit Center Accounting" in the below URL.
    http://help.sap.com/saphelp_erp60/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
    Regards

  • Delivery block on the line item and on schedule line

    why are there two delivery block on the line item and on schedule line  respectively in the sales order? which one is exactly used for blocking delivery order from creating ? thank you very much!

    Hi
    The reason being, each line item can have more than one schedule line. If the line item has only one schedule line, the block at item level or SchLine level gives the same result. If the line item has two schedule lines, and if you want to block only specific delivery(one among the two schedule lines) the block at item level blocks both the deliveries and if you use delivery block at schedule line level, you can block only the required scheduled delivery.
    Thanks,
    Ravi

  • Putting a Suto Payment block in Vendor line item

    Hi,
    we have a requirement where we want to auto block(payment block) a Vendor Line item whenever we hit a specific GL account in his posting.
    How we can do this in SAP.. I tried using substitution but cudn't move further.
    Plz suggest.
    Thanx in advance

    Hi
    I can able to create a substitution and I can able to populate payment block in the document. 
    Pls. follow the below:
    1.  Create a rule under complete document as BSEG-BUKRS = "Your company Code" AND BSEG-HKONT = "Your GL Account against which the vendor will be posted"
    2.  Now come to substitution and create a new step.
    3.  In substitution populate the rule and check
    4.  Then give constant value BSEG-ZLSPR = "A" (Blocking for payment)
    5.  Then activate it (don't forget to do this)
    6.  post the document and you can find block in the vendor account with the gl given in the rule mentioned above.
    Hope this helps.  If you need more or screenshot give me a mail in [email protected]
    If the above was useful, assign points.
    Thanks
    Rago

  • How to release Stock blocked against deleted line items from  Sales order.

    We have Scenario as follows.
    Sales order made for  items available in stock.  Deleted few lineitems from sales order balance items delivered and invoiced. Sales cycle is complete in all sense.
    What we have noticed is when we are creating new sales order / Delivery for deleted items from above Sales order it shows deleted quantity is blocked against old sales order. These line items are no longer
    available in old sales order since it is deleted also it is not appearing in open sales order report (VA05).
    Overall stock available is same as quantity mentioned in deleted line item.
    In MD04 - Sales requirenment transaction it shows sales order / line item against which it is blocked.
                    i.e deleted line item.
    How to release these stock and make available for sales. Any standard process available ? or any other solutions
    Thanks & Regards,

    I got a solution for my question from other forum. for info
    Go to SE38 and enter program SDRQCR21 then execute...
    Enter line item which is blocked for sales order in MD04 and enter plant then check Data
    transfer box and uncheck other boxes... It will pop up information and click yes...
    You will get one report and Stock inconsistency will go off and then check it in MD04....
    regards

  • Blocking a Requisition Line Item if A Purchase order exists

    Hi All,
    We are looking at a way to block a purchase requisition (not allow the end user to make changes) if a Purchase Order Exists for that purchase requisition line item. Is there a way of doing this without having to use a user exit?
    We do have release strategies on requisitions so we can control the filed status there but this is not really going to solve the 'problem'
    Your help will appreciated.
    Kind Regards,
    GA

    Hi,
    Thanks for your help. The end user are mostly changing the value, quantity and adding specification in the text fields. But the procurement department do not pick these changes up as the PO is already with the Vendor.
    Regards,
    GA

  • Blocked/UnBlocked PO Line Items

    Hi Guys,
    How to Identify whether a Purchase Order Line Item is Blocked/UnBlocked Internally.
    I have a customer code, wherer I have check for Blocked?UnBlocked PO Line Items and according to that I have tod display the Items in a Report.
    Many thanks for the Help.
    Regards,
    Anbalagan.V

    Hi,
    In EKPO for that PO line item , if
    EKPO-LOEKZ = S i.e. it is blocked
    EKPO-LOEKZ = L i.e. it is deleted
    EKPO-LOEKZ = null i.e. it is unblocked.
    Hope it clarifies.
    Bye
    anupam

  • Mass Blocking of PR Line Items

    Dear SAP Experts,
    I have a one query.
    I had a more than 1000 open PR's. I want to block these PR's.
    Can any body give me solution?
    Some PR's may had more than 10 line Items.
    I had checked for Mass Maint for PR, but there is not that field.
    Hope u had understand my problem.
    Waiting for reply.
    Regards,
    Mahesh

    Hello Pankaj,
    Thanks for quick reply.
    I dont want put deletetion flag for Line item.
    I want to block that from further processing.
    I want it for field - EBAKZ.
    Hope u had understand my problem.
    waiting for reply,
    Mahesh

  • How to control Payment Block field at line item level

    Hi Experts,
    Could anyone please let me know how to control payment block and payment method fields at line item level.
    I have checked field status at posting key (OB41) and GL (OB14) level but didn’t get any parameter to control these fields.
    I need your expert guidance.
    Regards,
    Mohammed Kalim

    Hi Mohammed,
    Please go to OB24/
    Select * (for all co.codes) default field status.Or Create new entry and input your co.code, Save it. Come back to co.code.
    Go to payment transaction
    Payment block and payment method display can be controlled from here for vendor master data
    Thanks and good luck.
    Regards,
    Sam

  • Manual Line Items in Asset Recon - Would Rvrsal allow it to be made Recon?

    Gurus,
    Now that one account had to be Recon Account, as it is needed for Depreciation Run i.e. 202050 is accumulated depreciation account.
    But that account was not made as Recon Account and manually line items were being entered.
    Now that the asset class has been configured with this account as Recon Account to post the Depreciation entries.
    Question is whether after reversing the line items, would the system then allow it to be labeled as a Recon Account even when the line items exist as line items cannot be erased even after reversal?
    Thanks.
    Points available

    Yes. When you reverse thoose line items (make balance zero) system will allow you modifying setting to RECN and type Asset.
    regards

  • Copy Trading Partner to Asset line items from Vendor line items in F-90

    Dear Friends,
    I want to copy trading partner field from Vendor line item to other line items like Asset and Tax in T.code - F-90
    Client want to use Transaction type - 100
    Is it feasible?
    Thanks in advance

    try:
    1) substitution - tcode OBBH
    or
    2) open FI - menu FIBF tcode BF44
        - event 1120 or 1130
    A.

  • BLOCKING THE PAYMENT TO VENDOR LINE ITEM IN APP

    I am doing  APP Run in F110.  Here I want to block one vendor line item.  In the Edit proposal button I tried to block the line item.  But system is throughing a Error messeage saying that You cannot block the payment in proposal run.
    Can any one pls help in this regard.

    hi seshagiri,
    In <b>F110 </b>while running the Payment Proposal click on that and u can see the list of the invoices to to clear and select the line item whcih u want to block and Double click on it. The window popups and ask for the Payment block in that select the Payment block as A to blokc the invoicess and then continue it. Save it
    Again get back to the previious page and press enter .
    then only the opne invoices will be cleared in that.
    AGain if u want to release that invoices then go to <b>MRBR </b>and slect the invoices and release from there.
    Assign the points if usefulll
    Ranjit

  • How to park a Asset & Vendor combination line items in tcode FV60

    Respected Members,
    I want to park a document which consists one line item to vendor and other line item to
    asset.
    We can use tcode F-63 but it wont give the withholding tax,so we have to use the tcode
    FV60 but we are not getting any field to put asset in FV60 or no provision of posting
    key so that if we put asset in g/l item field then it should automatically changes to gl
    account based on posting key (70).
    Kindly help me as soon as possible.
    Thanks a lot.
    Manish

    hi
    try with FB01

  • Block PO line items en-mass

    Hi Experts
    Im a new member so pardon me if this question has been answered before. We are on IS Retail 4.0b.
    I need to block multiple PO line items in mass (EKPO u2013 LOEKZ). Donu2019t think the version we use has the transaction MEMASSPO. The transaction MASS does not have the object for POu2019s. Any idea how I can do it?
    Thank you

    You can do a simple LSMW recording on transaction ME22 and carry out this mass update. If you don't know LSMW, contact your ABAP consultant.

  • How to Block PO line items

    Hi,
    I want to block PO line items using Program/BAPI/FM or etc....
    Actually my requirement is I want to upload a excel file with PO # and PO line item # s,  that Program/BAPI/FM should block the PO line items which are sent by excel file.  and in EKPO-LOKEZ should 'S'.
    Regards,
    Ganesh

    Hi Ganesh,
    I dont think there such a BAPI or FM.
    However try with CIF_ADC_TRANSMIT_PO_BLOCK
    Regards
    Abhii...

Maybe you are looking for