Blocked stock and GR Block stock

Can anyone please let me know the difference between Blocked stock and GR blocked stock.  How to post stock to these both stock type and how valuation matters to those.
Also for transfer posting from Stock type Blocked Stock  to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not....
Please clarify me on this.
Thank you
Shreek

Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
GR Blocked stocks means if you have doubt about the stock you can post these stocks to GR Blocked stock with mvt type 103.In this case no accounting documents generated.Once you gets clarified the doubt about stock you can move the stock to your stock with mvt 105.Once you post the document with 105 you can get accounting documents will be generated.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not...
Blocked stock is you are blocked these stocks for other movements This stock you can transfer mvt 343 & 344 blocked to unrestricted or unrestricted to block.In this cas you are moving the stocks with in storage location in single plant so thesre is no accounting generated.only stock status changed..
Hope this will clarifies,
JS

Similar Messages

  • GRN to Blocked stock and Excise Invoice

    First the material truck comes to the factory gate and the security enters in the sheet and informs to stores regarding the truck with materail for the sample quality check.the stores inform to quality and the sample is checked by the quality and send the results to the stores.If the material is ok then the vehicle come in to factory and if else it's poor quality then the vehicle is sent back as it is called as first level quality
    if the material rejected then it will be sent back but no excise capture will be entered.
                  if the material is approved from the stores then the entry will be done in the normal system with the excise capture.and GRN then the material again go for second quality for the total lot.
       Stores Deptt.  checks all the document such as Invoice Original Copy, Transpoter Copy for CENVAT Credit, form31 (where applicable), P.O. reference and Storage Space etc.
                               How to track the material with the excise and GRN entry  when it comes at the gate with first quality and second quality.if i put the material into the block stock.or any other way to take care of this process

    Hi
    You can do the Goods receipt in two steps using movements 103 & 105.
    In 103 the GR is odne inot GR-Blocked stock, but no accounting documents are trigerred.
    If the material is rejected in first quality chek you can revese the same with 104.
    If the Material is correct & you have taken the material in use movemnt 105, referncing the 103 Material document. Here you can capture the excise invoice & other details. Accounting document gets generated.
    You can track the process using MB51 Material document report for 103 & 105 movements.
    Thanks & regards
    Kishore

  • How to get block stock of QI and UR

    Dear All,
                 I have a requirement to create a customized report for Finished products stocks.
    Selection screen:
       - Plant
       - S/Loc
       - material
       - month
       - year
    Output has opening and closing balance, of stocks . I am fetching blocked stock from MARDH, (SPEME + RETME )
    my problem now is is want to excluded block stock to QI (with movement type 349 and 350). Please suggest me as how to exclude material from movement type (349 & 350) from the total of MARDH (SPEME + RETME )
    Edited by: soyunee on Apr 24, 2009 2:50 PM

    Hi Soyunee,
    To make all types of calculations on stock I have a some methods posted previously,,
    Please check the link once for calculating the stocks accordingly.
    [How to calculate Opening Stock for a particular date|How to calculate Opening Stock for a particular date.;
    To Calculate Opening Stock & Closing stock there are different procedures.
    It just depends of\n the client requirements & usage of the material.
    For example, we have different types of stocks, like, Through Pipeline, Special, Unristricted, quality, safety,
    and many types of stocks.... so all these types are indicated in MSEG tabe in SOBTZ field,...
    Now Comimg to your Query, You need to calculate OPENING & CLOSING STOCK.
    We have a similiar standard report in MB5B Tcode..
    to get the same results in your report do like this...
    For valuated stock go to the MARDH, MBEWH, MCHBH tables But I Prefer MBEWH.
    here in MBEWH give the month & year and you get the result in LBKUM field...
    For Special stock, You need to go to another table like MKOLH,,(I forgot still 2 more) and
    give the month & year inputs and you will get the result in SLABS field.
    and remaining MB5B refers to its deetails lists with different Movement types,
    whcih you can get clearly from MSEG Table...
    Hope you can write the select Queries accordingly.
    If you want to find the Stock for a particluar date, It is not available in any table as I know,
    Rather you need to do calculations like this.
    1. Select the stock (Menge) till date from MSEG and add all with different movement types,
    Its a logic need to ask to your functional consultant,
    like 101 added to stock, 601 sales, 102 rejeted, 602 added back to stock,... transfers, 261,,, like this.
    But take a little time, get all these by using MKPF & MSEG tables... thats it.
    Or----
    2.Tables are MSEG , MKPF ... use Debit / Credit indicator ( Do not go woth any static Movement types ) and u have to consider all stock related table
    MBEW , EBEW etc..., to get the stcok on particular date .
    Please refer to Std. Tcode FBL5N for reference.
    Thanks & regards,
    Dileep .C

  • How to migrate GR block stock (103) and its PO from SAP to SAP system

    Hello All,
    We are migrating from one SAP system to another . Our approach is to only migrate open POs and upload stock with initial entry. This works for POs with 101 movement type. However POs with Goods in transit - which usuallly follow the 103-105 cycle are causing an issue.
    How would I migrate GR blocked stock i.e. if a PO has had only 103 mvt against it.
    Thanks in advance.

    Hi,
       If the invoice is not entered / paid, then the old PO should not be processed for any subsequent process and you have to do all the subsequent process based on the new PO in the new system. You may block the old PO item to avoid any mistake.
       If invoice is already entered and pending for payment, please check with your accounts department regarding the approach, since it will be critical from audit point of view. You may either cancel the invoice in the old system and create the same in the new; or continue with the payment in the old system and transfer the correct material valuation price from old system to new system and create free of cost PO for these items (only for already paid items) in the new system (since invoice is already paid).
       If you need the GR blocked stock, you have to create the transaction data!!. You may use any of the data upload tool to achieve the same!
    Regards,
    AKPT

  • Made a UD to 'Scrap'. But Stock Category is "Q" and does not show in MMBE "Blocked"..WHY?

    Hi,
    I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
    The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
    However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
    Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
    Please advise.
    Regards
    Priyanka

    My understanding was when I input a quantity in 'Scrap' field during UD
    1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
    2) The stock category should be "S" and not "Q"
    I agree that in MMBE based on your explanation the stock should not be shown in blocked.
    But can you explain why the stock category is "Q" instead of "S"
    Regards
    Priyanka

  • Blocked Stock and Frlag material for Deletion

    What is the diffrence between blocked stock and flagging material for deletion.
    Thank you

    Hi,
    Difference between Block stock and flag material for deletion is:
    Block stock will only come into picture if your client says that when ever they receive stock, before quality and physical check it should not create any accounting document..So what you will do is, you will receive stock as block stock with mvt 103...Once Check is done you will release your block stock with 104....
    Say for an e.g. Vendor has supplied you goods in your premises...Same time you have noticed that goods are damaged o rare of  poor quality...So you will post the stock as block stock...So once you post as a block stock, there won't be any accounting documents generated....
    Material flad for deletion means: That particluar material can not be used for further procurement..E.g..  may be client has stopped using that material....
    Hope it clears
    Utsav

  • Goods receipts blocked stock and quality inspection

    Hi,
    we want to create an inspection lot for an initial sample automatically as the goods receipts is posted. At the same time we don't want the amount to appear in the normal quality inspection stock or in the normal blocked stock but instead it should be posted in the goods receipt blocked stock.
    Is it possible to post it automatically to the goods receipts blocked stock?
    Is it possible to create an inspection lot automatically for this?
    Thanks,
    Marcus.

    This isn't something that is straight forward, like just running a report.
    You have to look at the field QALS-LMENGEZUB which is the quantity to be posted of he inspection lot.  Keeping in mind that you can have multiple inspection lots for the same batch, you'd have to get all qals records for the batch you are interested in.
    You then have to compare all the related MCHB records for the material and ln that table sum all the values in field CINSM.
    That should show you any inconsistencies between the MM and QM.
    I am assuming this is for batch managed, non-HU managed materials.
    If not, let me know and we'll take another crack at it.
    FF

  • Block Stock consider during MRP Run and Stock availibility check

    Dear All,
    I am facing the stock availibility check , Sytem consider the Defective material which is Block in same storage location ,and system not generate the Planned order .
    -Blocked Material stock 100, and requirement 100 then system not generate the planned. Client need the system generate planned order 100 , Because 100 material is defective.
    I have configured the system scope of availibility , Block stock check remove , but problem is not solve.
    Thanks
    Rajesh Tiwari

    Dear ,
    Can you please re-check your MRP plant parametrs in OPPQ wether   you have selected blocked stock( Available Stock tab )  option by chance ?
    Please de-select the same  and re-run MRP.Generally MRP does not consider block stock  in net requirement calcualtion .One more thing  , MRP does material avilablity check as per OMJJ set up ( define availbality chek ) but does not consider the same while doing net requirement calcualtion to generate PR rather it goes down to MRP plant parametrs ( oppq or oppr )
    Hope this is clear
    Regards
    JH
    Edited by: Jiaul Haque on Sep 16, 2010 9:29 AM

  • GR into 'blocked stock'  and GR into ' Goods receipt blocked stock'

    Hellow!
    I am to implement  2 scenarios
    1.  "GR into Goods receipt blocked stock"
    2. 'GR into Blocked stock'
    We use GR via shipment (movement type 101 , stock category ' ' ).
    1 . I have tried to change stock category in delibery but fiels is locked. How could I set 'S' category for blocked stock to recive in 'Blocked stock'
    2. How could I recive into ' Goods receipt blocked stock'?
    Thank you for answers.
    Andrey Garshin.

    Hi Andrey,
    I think the only way to do GR to GR blocked stock is in the GR confirmation from WMS (IDoc SHP_IBDLV_CONFIRM_DECENTRAL if you use DWMS, IDoc MBGMCR or WMMBXY if you don't use DWMS). Assign the movement type (BWART) = 103 in the IDoc. Please note that the stock type would better to be coordinated between the WMS and SAP, i.e. it is the WMS that shall say "I received the goods into the GR blocked stock" and only in such case you will map it into mvt type 103 in SAP.
    For the normal blocked stock, I would suggest you to try setting this in the PO, tab "Delivery". Do it before you create the inb. delivery and see if it helps. If not, then you have the same option as for the GR blocked stock, set the stock type to S in the incoming IDoc.
    BR
    Raf

  • Invoice Verification and valuated blocked stock

    Hi,
    We are using movement types 107 / 109 for modeling stock in transit.
    And we have trouble in invoice entry processing. We perform a good receipt with movement type 107 (Valuated Blocked Stock), but no 109 (storage receipt) is performed, when entering the vendor invoice (MIRO), the positions of the purchase order are shown in blank, no quantity or price is proposed.
    Is there a way that MIRO transaction show price and quantity of receipts performed with movement type 107?
    Best Regards.

    Hi,
    If you are receiving the material at Valuated blocked stock, then the system will not propose any quantity or price at the MIRO. Make the stock as unrestricted then only post the invoice.
    Regards,
    Prashant Kolhatkar

  • Stock Status of meterial  is set as 'blocked stock' and 'unrestricted"

    Any Standard Report Stock Status of meterial  is set as 'blocked stock' and 'unrestricted"?

    Hi,
    You can check the stock status using transaction mmbe......
    Regards,
    Noopur

  • Storage location extension for Blocked and Quality inspection stocks

    Hi All,
    Could any one explain how to extend a Storage location (which is actually maintained for the Returns) to make use for the Blocked and Quality inspection stocks. Does this require any config settings.
    Thanks in advance.
    Kalyan

    Hi,
    Thanks for the Reply.
    Let me be more clear,in describing my requirement. Actually the present Storage location is maintained for only Returns. But in addition to this I require to make use of this storage location for the purpose of the maintianing Blocked Stock or QI stock.
    Therfore to achieve above what are necessary steps or do i need to maintain any config settings for this.
    Thank You,
    Kalyan.

  • Blocked stock and Goods Receipt Blocked Stock

    Hie to all...
    can any one tell me what is  Blocked stock and Goods Receipt Blocked Stock?
    regards
    R.Reddy.

    Hi,
    Blocked stock: It is the stock lying in our stock. i.e this stock is valuated. Material is moved to blocked stock under following circumstances.
    1.GR is already made, but there are some quality issues which can not be solved immedaitely. At the same time one should prevent the use of that material.
    2.During assembly / inhouse storage / internal movement if the material gets damaged & you can not scrap the material immediately as you are not sure about the reason for damage.
    Goods receipt blocked stock: This stock is non valuated. It is done,
    1.If there is gate entry(103 movement) for the material, which will be verified & released by the stores (105 movement) after verifiing the material with respect to the documents sent by the vendor.
    Hope this answers your question.
    Regards,
    Krishna A S V

  • Putaway Block and Stock Removal Block  en masse on Bins

    Dear Gurus
    Is there a way that we can put a Putaway block and Stock removal block on more than one Bin at once
    Using LS11 - Change bin selectively, allows me to choose more than one bin to change, BUT the option is not there to allow me to put a putaway block and stock removal block collectively
    Please advise
    Many thanks
    Tony

    hi,
    use LS06 and give the storage type and WH no...you can block all the bins for that storage type in one go for Stock removal and putaway.
    Regards,
    Vijay Kumar

  • Restricted and blocked stock

    Can any one tell
    What is Restricted use stock,Blocked stock??
    in which situation we will post the stock into blocked stock and Restricted stock??
    Locked - failed to search properly
    Edited by: Csaba Szommer on Mar 31, 2011 8:11 AM

    Hi
    Stock other than Un-restricted is restricted stock  eg. quality, blocked, reserved etc.  You can consume the material stock in restricted use .
    Blocked Stock is a kind of Dead stock . You cant use it without changing its status .
    More details Check out the link
    http://www.sap-img.com/materials/differences-between-restricted-vs-blocked-stock.htm
    Regards
    Anand

  • GR blocked Stock and Blocked Stock

    Dear Experts,
    In standard way in T.code MMBE which stock in Gr blocked and Blocked stock how can I see this stock document no. ( 103 and quality 321 etc. ) in which document no they come in same stock.
    Pooja

    Hi,
    For your require ment go to the T.Code MB51 and give the Mov type  , you get the documents relataed to as per Mov no.
    In MMBe itself the option is there for GR blocked stock and blocked stock.
    Regards,
    Andra

Maybe you are looking for