Blocking Status Tab strip in VA02 for Certain users

Hi,
I have to block the status tab strip for certain users in VA02 tcode .
this tab strip is shown when user double cick the line item.points will be rewarded
Thanks and regards
Prakash B.

Hi,
you can use in MV45AFZZ the PERFORM USEREXIT_FIELD_MODIFICATION.
You can set the desired screen fields to inactive.
Rgds,
JP

Similar Messages

Forward mail to MS Exchange for certain users

Hello.
We have a "master" Oracle Messaging Exchange Server and we have recently installed a Microsoft Messaging Server. We need certain users to use MS Exchange. The idea is changing mailHost LDAP attribute for those users (let's take [email protected] as an example), setting the MS Exchange HUB server, let's say hub.domain.com (mailHost: hub.domain.com). Doing so, mails sent to [email protected] are sent to hub.domain.com using lmtp channel. Everything works fine except for an issue: MS Exchange sees the from address like "user@lmtpcs-daemon", so we have to configure MS Exchange to use "lmtpcs-daemon" as secondary domain of domain.com, otherwise it doesn't know what to do with those mails.
Is there a way to not do that rewrite for certain users? Or maybe can we create a new channel to forward mails to Exchange? Could we define a channel depending on mailHost value or something like that?
Any thoughts?
Thank you very much.

Thank you very much for your inputs.
It's being quite difficult for me to understand this whole mail routing thing. According to the documentation:
"The handling of a missing mailhost attribute is different depending on whether the entry is a user or a group. In the case of a user, a mailhost is essential, so if no mailhost attribute is present a new address of the form
@smarthost:user@domain
is constructed using the smart host for the domain determined by the LDAP_DOMAIN_ATTR_SMARTHOST MTA option"
Sounds good, it seems that I just need to delete mailHost attribute for the users who need to use Exchange and set LDAP_DOMAIN_ATTR_SMARTHOST in option.dat. I've tried that but I get a "4.0.0 temporary error returned by alias expansion" when I send a mail to the test user.
I've deleted the LDAP_DOMAIN_ATTR_SMARTHOST line and I've set mailRoutingSmartHost LDAP attribute for the user but I get the same result.
I'm not even sure about the mailRoutingSmartHost format. This is what I have:
mailRoutingSmartHost: correoweb.saludcastillayleon.es
root@MTA1 # imsimta test -rewrite -debug [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
09:49:06.60: Debug output enabled, system MTA1.domain.com, process 41f0.1, message enqueue routines version V6.3 compiled Mar 14 2008 17:07:19
09:49:06.60: mmc_winit('l','[email protected]','[email protected]') called.
09:49:06.60: Address reversal invoked on [email protected], force reverse URL 1, capture 1
09:49:06.60: Rewriting: Mbox = "postmaster", host = "mta1.domain.com", domain = "$*", literal = "", tag = ""
09:49:06.60: Rewrite: "$*", position 0, hash table -
09:49:06.60: Found: "$A$E$F$U%[email protected]"
09:49:06.60: Rewrite failed, not forward.
09:49:06.60: Rewrite: "$*", position 1, hash table -
09:49:06.60: Failed.
09:49:06.60: Rewrite: "$*", position 0, rewrite database -
09:49:06.60: Failed
09:49:06.60: Rewriting: Mbox = "postmaster", host = "mta1", domain = "mta1.domain.com", literal = "", tag = ""
09:49:06.60: Rewrite: "mta1.domain.com", position 0, hash table -
09:49:06.60: Found: "$U%[email protected]"
09:49:06.60: New mailbox: "postmaster".
09:49:06.60: New host: "mta1.domain.com".
09:49:06.60: New route: "mta1.domain.com".
09:49:06.60: New channel system: "mta1.domain.com".
09:49:06.60: Looking up host "mta1.domain.com".
09:49:06.60: - found on channel l
09:49:06.60: Routelocal flag set; scanning for % and !
09:49:06.60: Checking reverse URL cache for: [email protected]
09:49:06.60: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
09:49:06.68: URL generation failed, status = 0
09:49:06.68: Mapped return address: [email protected]
09:49:06.68: from_access mapping check: ||MAIL|l|[email protected]|
09:49:06.68: Queue area size 145940970, temp area size 21837182
09:49:06.68: 36485242 blocks of effective free queue space available; setting disk limit accordingly.
09:49:06.68: 10918591 blocks of free temporary space available; setting disk limit accordingly.
09:49:06.68: - passed.
09:49:06.68: Rewriting: Mbox = "postmaster", host = "mta1.domain.com", domain = "$*", literal = "", tag = ""
09:49:06.68: Rewrite: "$*", position 0, hash table -
09:49:06.68: Found: "$A$E$F$U%[email protected]"
09:49:06.68: Rewrite failed, not forward.
09:49:06.68: Rewrite: "$*", position 1, hash table -
09:49:06.68: Failed.
09:49:06.68: Rewrite: "$*", position 0, rewrite database -
09:49:06.68: Failed
09:49:06.68: Rewriting: Mbox = "postmaster", host = "mta1", domain = "mta1.domain.com", literal = "", tag = ""
09:49:06.68: Rewrite: "mta1.domain.com", position 0, hash table -
09:49:06.68: Found: "$U%[email protected]"
09:49:06.68: New mailbox: "postmaster".
09:49:06.68: New host: "mta1.domain.com".
09:49:06.68: New route: "mta1.domain.com".
09:49:06.68: New channel system: "mta1.domain.com".
09:49:06.68: Looking up host "mta1.domain.com".
09:49:06.68: - found on channel l
09:49:06.68: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
09:49:06.68: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.68: Rewrite: "$*", position 0, hash table -
09:49:06.68: Found: "$A$E$F$U%[email protected]"
09:49:06.68: Rewrite failed, not envelope.
09:49:06.68: Rewrite: "$*", position 1, hash table -
09:49:06.68: Failed.
09:49:06.68: Rewrite: "$*", position 0, rewrite database -
09:49:06.68: Failed
09:49:06.68: Rewriting: Mbox = "user", host = "saludcastillayleon", domain = "domain.com", literal = "", tag = ""
09:49:06.68: Rewrite: "domain.com", position 0, hash table -
09:49:06.68: Found: "$U%[email protected]"
09:49:06.68: New mailbox: "user".
09:49:06.68: New host: "domain.com".
09:49:06.68: New route: "mta1.domain.com".
09:49:06.68: New channel system: "mta1.domain.com".
09:49:06.68: Looking up host "mta1.domain.com".
09:49:06.68: - found on channel l
09:49:06.68: Routelocal flag set; scanning for % and !
09:49:06.68: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.68: Rewrite: "$*", position 0, hash table -
09:49:06.68: Found: "$A$E$F$U%[email protected]"
09:49:06.68: Rewrite failed, not envelope.
09:49:06.68: Rewrite: "$*", position 1, hash table -
09:49:06.68: Failed.
09:49:06.68: Rewrite: "$*", position 0, rewrite database -
09:49:06.68: Failed
09:49:06.68: Rewriting: Mbox = "user", host = "domain", domain = "domain.com", literal = "", tag = ""
09:49:06.68: Rewrite: "domain.com", position 0, hash table -
09:49:06.68: Found: "$U%[email protected]"
09:49:06.68: New mailbox: "user".
09:49:06.68: New host: "domain.com".
09:49:06.68: New route: "mta1.domain.com".
09:49:06.68: New channel system: "mta1.domain.com".
09:49:06.68: Looking up host "mta1.domain.com".
09:49:06.68: - found on channel l
09:49:06.68: Routelocal flag set; scanning for % and !
09:49:06.68: Rewrite rules result: [email protected]
09:49:06.68: Checking reverse URL cache for: [email protected]
09:49:06.68: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
09:49:06.69: Resulting URL: ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
09:49:06.69: mmc_open_url called to open ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
09:49:06.69: URL with quotes stripped: ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
09:49:06.69: LDAP URL identified
09:49:06.69: URL context #1 will be used
09:49:06.69: Performing URL search on: ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
09:49:06.70: mmc_read_url result: [uid=user, ou=People, o=domain.com]
09:49:06.70: URL resolution returned: [uid=user, ou=People, o=domain.com]
09:49:06.70: mmc_read_url result: [preferredlanguage] en
09:49:06.70: URL resolution returned: [preferredlanguage] en
09:49:06.70: Attribute index: 0
09:49:06.70: LDAP URL produced preferred language en
09:49:06.70: mmc_read_url result: [mail] [email protected]
09:49:06.70: URL resolution returned: [mail] [email protected]
09:49:06.70: Attribute index: 0
09:49:06.70: LDAP URL produced address [email protected]
09:49:06.70: mmc_read_url result: [mailalternateaddress] [email protected]
09:49:06.70: URL resolution returned: [mailalternateaddress] [email protected]
09:49:06.70: Attribute index: 0
09:49:06.70: Alternate address [email protected]
09:49:06.70: No more results to return
*** Debug output from rewriting a forward envelope address:
09:49:06.70: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.70: Rewrite: "$*", position 0, hash table -
09:49:06.70: Found: "$A$E$F$U%[email protected]"
09:49:06.70: Match, pattern = "domain.com", current = "(*domaincheck*)"
09:49:06.70: old state = not checked.
09:49:06.70: Domain check on domain.com.
09:49:06.70: Added domain result 1 to cache for domain.com.
09:49:06.70: new state = succeeded.
09:49:06.70: New mailbox: "user".
09:49:06.70: New host: "domain.com".
09:49:06.70: New route: "mta1.domain.com".
09:49:06.70: New channel system: "mta1.domain.com".
09:49:06.70: Looking up host "mta1.domain.com".
09:49:06.70: - found on channel l
09:49:06.70: Routelocal flag set; scanning for % and !
address channel = l
forward channel = l
channel description =
channel caption =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTBIT HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5 = TRUNCATESMTPLONGLINES
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = domain.com domain.com
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = mta1.domain.com
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
expandchannel =
notificationchannel =
dispositionchannel =
saslswitchchannel =
tlsswitchchannel =
backward channel = l
unique identifier = [email protected]
header forward address = [email protected] (route (mta1.domain.com,mta1.domain.com)) (host domain.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (mta1.domain.com,mta1.domain.com)) (host domain.com)
envelope rev address = [email protected] (route (mta1.domain.com,mta1.domain.com)) (host domain.com)
name =
mbox = user
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
*** Debug output from alias expansion:
09:49:06.70: Inner expand, level = 0, mailbox = [email protected]
09:49:06.70: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.70: Rewrite: "$*", position 0, hash table -
09:49:06.70: Found: "$A$E$F$U%[email protected]"
09:49:06.70: Match, pattern = "domain.com", current = "(*domaincheck*)"
09:49:06.70: old state = not checked.
09:49:06.70: Using result 1 from domain match cache.
09:49:06.70: new state = succeeded.
09:49:06.70: New mailbox: "user".
09:49:06.70: New host: "domain.com".
09:49:06.70: New route: "mta1.domain.com".
09:49:06.70: New channel system: "mta1.domain.com".
09:49:06.70: Looking up host "mta1.domain.com".
09:49:06.70: - found on channel l
09:49:06.70: Routelocal flag set; scanning for % and !
09:49:06.70: Reparsed mailbox: user
09:49:06.70: Reparsed host: domain.com
09:49:06.70: Variant #1 = [email protected]
09:49:06.70: Variant #2 = *@domain.com
09:49:06.70: Alias magic value 8764
09:49:06.70: LDAP URL template identified
09:49:06.70: URL determined to be: ldap:///o%3Ddomain.com?*?sub?(|([email protected])([email protected])([email protected]))
09:49:06.70: URL context #1 will be used
09:49:06.70: Performing URL search on: ldap:///o%3Ddomain.com?objectclass,inetuserstatus,mailuserstatus,inetMailGroupStatus,uid,preferredLanguage,mailRoutingAddress,mailMsgMaxBlocks,mail,mailAlternateAddress,mailEquivalentAddress,mailDeliveryOption,vacationStartDate,vacationEndDate,mailConversionTag,mailhost,mailQuota,mailMsgQuota,mailProgramDeliveryInfo,mailDeliveryFileURL,mailDeliveryFile,mailAutoReplyMode,mailAutoReplySubject,mailAutoReplyText,mailAutoReplyTextInternal,mailAutoReplyTimeOut,mailSieveRuleSource,mailForwardingAddress,mailDeferProcessing,mgrpMsgRejectAction,mgrpRejectText,mgrpMsgRejectText,mgrpBroadcasterPolicy,mgrpDisallowedBroadcaster,mgrpAllowedBroadcaster,mgrpDisallowedDomain,mgrpAllowedDomain,mgrpMsgMaxSize,mgrpAuthPassword,mgrpModerator,mgrpDeliverTo,memberURL,UniqueMember,mgrpRFC822MailMember,rfc822MailMember,mgrpErrorsTo,mgrpAddHeader,mgrpRemoveHeader,mgrpMsgPrefixText,mgrpMsgSuffixText,mgmanMemberVisibility,expandable?sub?(|([email protected])(mailAlternateAddress=user@09:49:06.72: Scanning LDAP result.
09:49:06.72: Attribute: objectclass
09:49:06.72: Attribute index: 0
09:49:06.72: Attribute: inetuserstatus
09:49:06.72: Attribute index: 1
09:49:06.72: Attribute: mailuserstatus
09:49:06.72: Attribute index: 2
09:49:06.72: Attribute: uid
09:49:06.72: Attribute index: 5
09:49:06.72: Attribute: preferredLanguage
09:49:06.72: Attribute index: 19
09:49:06.72: Attribute: mail
09:49:06.72: Attribute index: 31
09:49:06.72: Attribute: mailAlternateAddress
09:49:06.72: Attribute index: 32
09:49:06.72: Attribute: mailDeliveryOption
09:49:06.72: Attribute index: 34
09:49:06.72: Attribute: mailQuota
09:49:06.72: Attribute index: 51
09:49:06.72: Attribute: mailAutoReplyMode
09:49:06.72: Attribute index: 55
09:49:06.72: Attribute: mailForwardingAddress
09:49:06.72: Attribute index: 64
09:49:06.72: Attribute: mailDeferProcessing
09:49:06.72: Attribute index: 65
09:49:06.72: Scanning complete, begin actions
09:49:06.72: Possible user object classes: inetLocalMailRecipient+inetmailuser
09:49:06.72: Possible group object classes: inetLocalMailRecipient+inetmailgroup
09:49:06.72: Object class: top
09:49:06.72: Object class didn't match
09:49:06.72: Object class: person
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetuser
09:49:06.72: Object class didn't match
09:49:06.72: Object class: organizationalperson
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetorgperson
09:49:06.72: Object class didn't match
09:49:06.72: Object class: ipuser
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetmailuser
09:49:06.72: Object class match, reference value 1
09:49:06.72: Object class: inetlocalmailrecipient
09:49:06.72: Object class match, reference value 18
09:49:06.72: Object class: userpresenceprofile
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetsubscriber
09:49:06.72: Object class didn't match
09:49:06.72: Object class: icscalendaruser
09:49:06.72: Object class didn't match
09:49:06.72: Object class: iplanet-am-managed-person
09:49:06.72: Object class didn't match
09:49:06.72: Object class: iplanet-am-user-service
09:49:06.72: Object class didn't match
09:49:06.72: Object class: iplanetpreferences
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetadmin
09:49:06.72: Object class didn't match
09:49:06.72: Object class: sunamauthaccountlockout
09:49:06.72: Object class didn't match
09:49:06.72: Object class: sunUCPreferences
09:49:06.72: Object class didn't match
09:49:06.72: Object class: mailDomain
09:49:06.72: Object class didn't match
09:49:06.72: User/group index = 1
09:49:06.72: Domain is active
09:49:06.72: Mail domain is active
09:49:06.72: User status = active
09:49:06.72: User is active
09:49:06.72: Mail user status = active
09:49:06.72: User is active
09:49:06.72: User UID user found.
09:49:06.73: Delivery option: mailbox
09:49:06.73: Delivery options value: 1
09:49:06.73: Processing mailhost attribute
09:49:06.73: Mailhost not set for user
09:49:06.73: Adding result to cache.
09:49:06.73: Status for this address = -10
09:49:06.73: LDAP URL template identified
09:49:06.73: URL determined to be: ldap:///o%3Ddomain.com?*?sub?([email protected])
09:49:06.73: URL context #1 will be used
09:49:06.73: Performing URL search on: ldap:///o%3Ddomain.com?objectclass,inetuserstatus,mailuserstatus,inetMailGroupStatus,uid,preferredLanguage,mailRoutingAddress,mailMsgMaxBlocks,mail,mailAlternateAddress,mailEquivalentAddress,mailDeliveryOption,vacationStartDate,vacationEndDate,mailConversionTag,mailhost,mailQuota,mailMsgQuota,mailProgramDeliveryInfo,mailDeliveryFileURL,mailDeliveryFile,mailAutoReplyMode,mailAutoReplySubject,mailAutoReplyText,mailAutoReplyTextInternal,mailAutoReplyTimeOut,mailSieveRuleSource,mailForwardingAddress,mailDeferProcessing,mgrpMsgRejectAction,mgrpRejectText,mgrpMsgRejectText,mgrpBroadcasterPolicy,mgrpDisallowedBroadcaster,mgrpAllowedBroadcaster,mgrpDisallowedDomain,mgrpAllowedDomain,mgrpMsgMaxSize,mgrpAuthPassword,mgrpModerator,mgrpDeliverTo,memberURL,UniqueMember,mgrpRFC822MailMember,rfc822MailMember,mgrpErrorsTo,mgrpAddHeader,mgrpRemoveHeader,mgrpMsgPrefixText,mgrpMsgSuffixText,mgmanMemberVisibility,expandable?sub?([email protected])
09:49:06.75: Search succeeded but 0 entries returned
09:49:06.75: No matching entries were found that were valid
09:49:06.75: Status for this address = 0
0 expansion total.
*** Debug output from submitting an envelope address:
09:49:06.75: mmc_wadr(0x08103050,'[email protected]','[email protected]') called.
09:49:06.75: Copy estimate before address addition is 1
09:49:06.75: Parsing address [email protected]
09:49:06.75: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.75: Rewrite: "$*", position 0, hash table -
09:49:06.75: Found: "$A$E$F$U%[email protected]"
09:49:06.75: Match, pattern = "domain.com", current = "(*domaincheck*)"
09:49:06.75: old state = not checked.
09:49:06.75: Using result 1 from domain match cache.
09:49:06.75: new state = succeeded.
09:49:06.75: New mailbox: "user".
09:49:06.75: New host: "domain.com".
09:49:06.75: New route: "mta1.domain.com".
09:49:06.75: New channel system: "mta1.domain.com".
09:49:06.75: Looking up host "mta1.domain.com".
09:49:06.75: - found on channel l
09:49:06.75: Routelocal flag set; scanning for % and !
09:49:06.75: Address [email protected] requires local processing.
09:49:06.75: Variant #1 = [email protected]
09:49:06.75: Variant #2 = *@domain.com
09:49:06.75: Alias magic value 8764
09:49:06.75: Checking for [email protected] in the system alias file
09:49:06.75: - not found
09:49:06.75: Checking for *@domain.com in the system alias file
09:49:06.75: - not found
09:49:06.75: Checking [email protected] with URL template ldap:///$V?*?sub?$R
09:49:06.75: LDAP URL template identified
09:49:06.75: URL determined to be: ldap:///o%3Ddomain.com?*?sub?(|([email protected])([email protected])([email protected]))
09:49:06.75: URL context #1 will be used
09:49:06.75: Using cached LDAP result for URL info: ldap:///$V?*?sub?$R|[email protected]|[email protected]
09:49:06.75: Scanning LDAP result.
09:49:06.75: Attribute: objectclass
09:49:06.75: Attribute index: 0
09:49:06.75: Attribute: inetuserstatus
09:49:06.75: Attribute index: 1
09:49:06.75: Attribute: mailuserstatus
09:49:06.75: Attribute index: 2
09:49:06.75: Attribute: uid
09:49:06.75: Attribute index: 5
09:49:06.75: Attribute: preferredLanguage
09:49:06.75: Attribute index: 19
09:49:06.75: Attribute: mail
09:49:06.75: Attribute index: 31
09:49:06.75: Attribute: mailAlternateAddress
09:49:06.75: Attribute index: 32
09:49:06.75: Attribute: mailDeliveryOption
09:49:06.75: Attribute index: 34
09:49:06.75: Attribute: mailQuota
09:49:06.75: Attribute index: 51
09:49:06.75: Attribute: mailAutoReplyMode
09:49:06.75: Attribute index: 55
09:49:06.75: Attribute: mailForwardingAddress
09:49:06.75: Attribute index: 64
09:49:06.75: Attribute: mailDeferProcessing
09:49:06.75: Attribute index: 65
09:49:06.75: Scanning complete, begin actions
09:49:06.75: Possible user object classes: inetLocalMailRecipient+inetmailuser
09:49:06.75: Possible group object classes: inetLocalMailRecipient+inetmailgroup
09:49:06.75: Object class: top
09:49:06.75: Object class didn't match
09:49:06.75: Object class: person
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetuser
09:49:06.75: Object class didn't match
09:49:06.75: Object class: organizationalperson
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetorgperson
09:49:06.75: Object class didn't match
09:49:06.75: Object class: ipuser
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetmailuser
09:49:06.75: Object class match, reference value 1
09:49:06.75: Object class: inetlocalmailrecipient
09:49:06.75: Object class match, reference value 18
09:49:06.75: Object class: userpresenceprofile
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetsubscriber
09:49:06.75: Object class didn't match
09:49:06.75: Object class: icscalendaruser
09:49:06.75: Object class didn't match
09:49:06.75: Object class: iplanet-am-managed-person
09:49:06.75: Object class didn't match
09:49:06.75: Object class: iplanet-am-user-service
09:49:06.75: Object class didn't match
09:49:06.75: Object class: iplanetpreferences
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetadmin
09:49:06.75: Object class didn't match
09:49:06.75: Object class: sunamauthaccountlockout
09:49:06.75: Object class didn't match
09:49:06.75: Object class: sunUCPreferences
09:49:06.75: Object class didn't match
09:49:06.75: Object class: mailDomain
09:49:06.75: Object class didn't match
09:49:06.75: User/group index = 1
09:49:06.75: Domain is active
09:49:06.75: Mail domain is active
09:49:06.75: User status = active
09:49:06.75: User is active
09:49:06.75: Mail user status = active
09:49:06.75: User is active
09:49:06.75: User UID user found.
09:49:06.75: Delivery option: mailbox
09:49:06.75: Delivery options value: 1
09:49:06.75: Processing mailhost attribute
09:49:06.75: Mailhost not set for user
09:49:06.75: Status for this address = -10
09:49:06.75: Temporary alias URL failure; reprocess later
09:49:06.75: - adding address [email protected] to channel reprocess
09:49:06.75: Good address count 1 defer count 1
09:49:06.75: All addresses deferred - treat as general temporary error
09:49:06.75: Copy estimate after address addition is 2
09:49:06.75: mmc_waend(0x08103050) called.
09:49:06.75: Copy estimate is 2
09:49:06.75: Queue area size 145940970, temp area size 21837154
09:49:06.75: 36485242 blocks of effective free queue space available; setting disk limit accordingly.
09:49:06.75: 10918577 blocks of free temporary space available; setting disk limit accordingly.
Submitted address list:
Address list error -- 4.0.0 temporary error returned by alias expansion: [email protected]
Submitted notifications list:

Default cost center not appearing for certain users

Hi Gurus,
We are on SRM 4.0 classic scenario.
For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
BR,
Sambit

hi
check if the users are correctly mapped into org structure (ppoma_bbp)
than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
regards
andrea

Restricting User defined Field for certain user

Hi experts
I have a field name U_JobNumber at header level of Item Master Data. Can we make visible for certain user ?
Is this possible .
Thank you in advance
Bishal

Hi Bishal,
There is a standard feature in SBO that allows you to enable and set the visibility of UDFs. This works on a user/company level. To do this, log in as the user, open the Item Master form and make sure that the UDF tabs is showing then choose Tools-Customisation Tools--Settings from the top menu. You'll then see a separate window that allows you to set the visibility or any UDFs on this form.
I don't think this feature is currently exposed via the DI API or UI API so you'd need to set these manually.
Kind Regards,
Owen

Password protect/disable printers for certain users under ML 10.8

I am looking for a solution to prevent my youger pupils to print everything without asking me. Is there a solution to protect/disable printers for certain users under ML 10.8 ?

Ok. The sharing interface is not robust enough (by itself) to password challenge print jobs. You may need to look at another printing technology known as CUPS. Apple created this for advanced print configuration, and it does offer Kerberos security with printing password challenges. I do not know if OS X server offers more granularity in configuration.
I won't be able to help you with the following as I do not use the CUPS printing solution here.
In Safari, type in the following and press return.
localhost:631
You will see a tabbed browser interface. And a bit of light reading ...

Field "delivery block" (VBAK-LIFSK) to be disabled for few users

Want to disable field "DELIVERY BLOCK"( VBAK-LIFSK) in t-code VA01 & VA02 for few users while creation and changing Sale Order.
How to do it?
Arul Murugan

Hi,
1. This can be achived by screen varient. t Code SHD0.
2. Through Authorization you can restrict user from removing the delivery block. but u can not restrict them to insert the delivery block.
for resrict from release check in authorisation role.
Object : V_VBAK_AAT
Activity : Deselect the "43" acivity.

Possible to make an item editable for certain users and read only for other

Is it possible to make an item editable for certain users and read only for others?
I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

Thank you, your suggestion worked.
It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

Can OneDrive for Business be disabled for certain users?

Is it possible to disable OneDrive for Business for certain users? If so, how? Thanks.

you can remove the OneDrive for Business client for the certain users from their computers so that they cannot use it.
http://community.office365.com/en-us/f/156/t/192252.aspx
http://www.askvg.com/what-is-skydrive-pro-option-and-how-to-remove-it-from-context-menu-after-installing-microsoft-office-2013/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Disabling cprojects alerts for certain users only

Hi
I need that no email alerts are sent to certain roles/people who have authorizations in cprojects. There are numerous alerts sent as email for any change of dates, thresholds etc. I need to disbale any email being sent in this for certain users.
How can it be done?
Regards
Senthil

Hi Senthil,
Would you please check the following
Evaluations -> Business Add-Ins (BAdIs) -> Change Alerts from Severities in cProjects
related method is CHANGE_ALERTS_OF_PROJECT, which has a change parameter:
CT_LANGUAGE_OF_RECIPIENT. You can apply your own logic to remove some recipient of the table, so that they do not get the e-mail.
Never tested, please check it out.
Kind regards,
Zhenbo

How to block on account payment for certain user

Dear All,
   We are looking to implement a policy on how to block certain users not to be able to take on account payment. One more query is it possible to disable a field. I want to disable the field "Payment on account" in the Incoming Payments. Please advice

Hi,
Sue below code in transaction notification procedure,Change userid =1 to user id for user ou want to block payment on account
IF @Object_type = N'24' and @transaction_type = N'A'
BEGIN
if exists (SELECT    ORCT.DocEntry from ORCT
                     WHERE (ORCT.PayNoDoc='Y' and ORCT.UserSign=1) and ORCT.DocEntry = @list_of_cols_val_tab_del
begin
        select @error =14
   select @error_message = 'Cannot make on account payments '
end
END
Thanks,
Neetu

How to restrict delivery Block in va02 for various users

Dear Experts
I am suppose to restrict the user depening on delivery block in transaction VA02 .There are no SAP pre-defined feilds authorization Object to restrict at delivery block level from PFCG ,and I have Created manually authorization object and class in Tcode Su21 and Su20 with table VBAK but its not giving any change .
Please kindly help
Thanks in advance
krishna

Hi
We have a very complex Billing block functionality. The sales orders are handled at many levels and when the process is completed at one level, they need to change the billing block to another one and the system will allow to change the block to the specified one only and not to any other block. There is a control in the code to restrict the allowed blocks.
We also maintain a Ztable with list of users (few super users/process primes and key people) for whom system will allow to remove/change to any other block as they wish.
In your case, if it is not possible through authorisations, then the best way is to handle the requirement through a Ztable for the users allowed to change the delivery block. This is one of the possible alternatives.
Thanks,
Ravi

Tabular Form - Read only condition for certain users

Is it possible to make a select list field in a tabular form read-only to certain users? Here's the situation:
The tabular form lists the users who need to select "Approve" or "Reject" in that field (they are approving or rejecting an engineering change)
I want all of them to see the approval/rejection of their team, but only have access to edit the select list associated with their record.
Thanks in advance.
Apex 4.0.0.00.46

You could use either "authorisations" tab or "conditional display" for the relevant column attribute.
Report Attributes->Column Attributes->authorisationsIt would be better to have some more detail about what you are trying to get (maybe a quick mock up of the form, for example) but, I can envision something along the lines of the following:
For each approval/rejection field:
1. Create an authorisation appropriate for access to to each approval/rejection field e.g. authorisation scheme "FOO"
2. In the relevant fields column attributes, set the authorisation to "FOO"
3. now create a read only "public" copy of the above field, using the "display as text (based on LOV does not save state)" - set the authorisation for this field as "{NOT FOO}"
(if you don't want to use authorisations, you could build an equivalent using "conditional display" instead, which is basically the same thing, except column specific)
The downside is of course that you're duplicating fields in your query, which creates a bit of redundancy. There may be better ways to achieve this (maybe you could make use of the APEX_ITEM api, for example) but this is fairly easy to set up IMO.

Setting New Window and New Tab behavior in Safari for all users

I would like Firefox to open to the homepage I have set for our school district rather than seeing the tiles for all users.

hello mcdermk, you could have a look at this method in order to lock and deploy certain settings: http://kb.mozillazine.org/Locking_preferences
in order to set a custom new tab page, you can put this line into the mozilla.cfg file:
lockPref("browser.newtab.url", "www.example.com");

How to Block Account member in input reporting for some users?

Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
I hope understand the question, im sorry about my english
thank you in advance
Ignacio Vazquez

I would think you could do one of the following:
Either set account as a secured dimension. You would then define security profiles for all account groups and assign those to your users / teams as appropriate. Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
Setup different input templates that only showed the accounts you wanted each group of users to see. Put the templates in different site folders and assign access to those sites as required. users would then only have access to open the template applicable to them. Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts. I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc. You then distribute the passwords to the users as appropriate.
Hope that helps.

Distiller crashes for certain user

Distiller 6.02 runniing on 10.4.7 on dual G5.
Distiller will not work for a certain user. Files appear to distil correctly but the PDFs never appear in the destination folder.
When this problem occurs there are no error messages, but Distiller freezes (and must be force-quit) the next time anything is clicked.
For the Admin user (or any other user on this machine) Distiller behaves OK.
I've tried:
• deleting user prefs
• deleteing user caches
• deleting user adobe font lists
• logging user in with no startup items
• updating Distiller
• rebuilding permissions
etc.
Any advice appreciated.
Thanks,
b.

Another possibility is that you've acquired a bad font, that's crashing the font handling subsystems.
Finding this can be a matter of going through the fonts in the Windows\Fonts folder and systematically removing them until Photoshop works again. Sometimes you can just activate the Type tool and expand the Font list, looking for an abrupt end to the list or faulty appearance of a font.
I imagine Adobe would be very interested to hear what specific font can crash their software like this when you find it.
-Noel

Blocking Status Tab strip in VA02 for Certain users

Similar Messages

Maybe you are looking for